芳基取代茚基钌羰基化合物的合成及晶体结构

配体C₉H₇R(R=Ph (1),4-tolyl (2),4-chlorophenyl (3),4-methoxyphenyl (4),2-thienyl (5))分别与Ru₃(CO)₁₂在甲苯或二甲苯中加热回流,得到了5个双核配合物[(η⁵-C₉H₆R)Ru(CO)]₂(μ-CO)₂(R=Ph (6),4-tolyl (7),4-chlorophenyl (8),4-methoxyphenyl (9),2-thienyl (10))。通过元素分析、红外光谱、核磁共振氢谱对配合物的结构进行了表征,并用X-射线单晶衍射法测定了配合物6,7和10的结构。     

烃基取代茚基钌羰基化合物的合成及晶体结构

配体C₉H₇R(R=CH₂CH₂CH₃ (1),CH₂(CH₃)₂ (2),C₅H₉ (3),CH₂C₆H₅ (4),CH₂CH=CH₂ (5))分别与Ru₃(CO)12在二甲苯或庚烷中加热回流,得到了6个双核配合物[(η⁵-C₉H₆R)Ru(CO)(μ-CO)]₂(R=CH₂CH₂CH₃ (6),CH₂(CH₃)₂ (7),C₅H₈ (8),CH₂C₆H₅ (9),CH₂CH=CH₂ (10))和[(η⁵-C₉H₆)(H₃CH₂C)CHCH(CH₂CH₃)(η⁵-C₉H₆)] [Ru(CO)(μ-CO)]₂ (11).通过元素分析、红外光谱、核磁共振氢谱对配合物的结构进行了表征,并用X-射线单晶衍射法测定了配合物6,9,10和11的结构.     

基于两个取代四甲基环戊二烯基配体的金属羰基化合物的合成及晶体结构

配体[C₅Me₄HR][R=4-BrPh(1),(MeC₅H₃N)CH₂(2)]分别与Mo(CO)₆,Ru₃(CO)₁₂和Fe(CO)₅在二甲苯中加热回流,得到了6个双核配合物trans-[η⁵-C₅Me₄R]₂Mo₂(CO)₆(3,4),trans-[(η⁵-C₅Me₄R)Ru(CO)(μ-CO)]₂(5,6)和trans-[η⁵-(C₅Me₄R)Fe(CO)(μ-CO)]₂(7,8,).通过元素分析、红外光谱、核磁共振氢谱对配合物的结构进行了表征,并用X-射线单晶衍射法测定了配合物3,5,6和8的结构.     

稀土与3-羧基苯磺酸、2-(4-吡啶基)-咪唑[4, 5-f]菲咯啉构筑的双核配合物的合成、晶体结构及表征

以3-羧基苯磺酸根(3-SBA)和2-(4-吡啶基)-咪唑[4, 5-f]菲咯啉(4-PDIP)为配体, 用水热法合成了3种稀土配合物:[Ln₂(3-SBA)₂(4-PDIP)₂(OH)₂(H₂O)₄]·2H₂O(Ln=Sm (1), Eu (2)和Gd (3))。用X-射线单晶衍射分析方法测定了其晶体结构。配合物1~3为同构的双核分子。2个羟基以桥联方式连接2个Ln(Ⅲ)离子, 3-SBA和4-PDIP以螯合双齿形式与Ln(Ⅲ)离子配位。双核分子之间通过氢键构筑成三维超分子结构。配合物1和3分别在 545 nm 和 529 nm 处出现来自于配体的荧光发射, 对应于配体的π^*-π的跃迁。配合物2呈现Eu(Ⅲ)离子的特征发射, 位于579、592、612、650和696 nm处的发射峰分别对应于⁵D₀→⁷F_j (j=0~4)跃迁。     

基于2,5-噻吩二甲酸的钙(Ⅱ)和钡(Ⅱ)配位聚合物的合成、晶体结构及性质

在溶剂热条件下,合成了2个碱土金属配位聚合物[Ca (tdc)(DMF)₂]_n(1)和[Ba (tdc)]_n(2)(H₂tdc=2,5-噻吩二甲酸),分别用元素分析、红外光谱、X射线单晶衍射、粉末衍射、热重分析和荧光光谱对它们进行了表征。结构分析表明,配合物1具有4,4连接的二维层状结构,拓扑符号为(4⁴·6²),而配合物2呈现三维网络结构。固体荧光测试表明配合物1比配合物2具有更显著的荧光性能。     

基于3-氧醚乙酸-邻苯二酸和N-辅助配体的锌和镉配合物的合成、晶体结构及荧光性质

水热法合成得到2个配合物, {[Zn₇(L)₄(bpe)₂(μ₃-OH)₂(H₂O)₈]·4H₂O}_n(1), 和{[Cd₃(L)₂(bpy)_2.5(H₂O)]·5.5H₂O}_n(2)(H₃L=3-(carboxymethoxy)benzene-1,2-dioic acid, bpe=1,2-bis(4-pyridyl)-ethene, bpy=4,4'-bipyridine), 并采用元素分析、红外光谱、热重和X-射线单晶衍射对其结构进行表征。配合物1中, 配体L^3-和bpe连接[Zn₅( μ₃-OH)₂]中心形成一维链, 这样的链通过氢键连接成三维的超分子结构。配合物2呈现(3,3,6)连接的网状结构。此外, 对配合物1和2的荧光性质进行了研究。     

3，4-二甲氧基苯乙酸邻菲咯啉轻稀土配合物的合成、晶体结构、荧光光谱及热行为

合成了3,4-二甲氧基苯乙酸邻菲咯啉轻稀土配合物：[RE₂(DMPA)₆(phen)₂](RE=Ce (1),Pr (2),Nd (3),Eu (4);HDMPA=3,4-二甲氧基苯乙酸,C₁₂H₁₂O₄;phen=1,10-邻菲咯啉),用元素分析、红外光谱、热重分析对产物进行表征,用单晶X-射线衍射方法测定了配合物3的晶体结构。配合物C₈₄H₈₂Nd₂N₄O₂₄ (3)属于三斜晶系,P1 空间群,晶胞参数：a=1.242 06(9) nm,b=1.244 56(9) nm,c=1.477 88(11) nm,α=90.617(4)°,β=103.486(4)°,γ=116.870(3)°,晶胞体积：V=1.963 8(2) nm³,晶胞内结构基元数Z=1,分子量M_r=1 820.02,电子数F(000)=926,密度D_c=1.539 g·cm^-3,吸收系数μ(Mo Kα)=1.389 mm^-1。测定了铕配合物的荧光光谱,荧光光谱表明,配合物显示了铕(Ⅲ)离子的特征发射,这表明配体将吸收的能量有效地转移给了中心离子,配体起到了很好的敏化作用。同时也测定了铕配合物的热分解情况,并利用TG-DTG曲线采用非等温积分法和微分法研究了热分解动力学机理。     

基于5-(3',4'-二(四唑-5'-基)苯氧基)间苯二甲酸构筑的镧系金属配合物的合成、晶体结构及性质

在水热条件下利用H₂btpa配体合成了2个镧系金属配合物{[Ln(btpa)(H₂O)(OH)]·bpy}_n(Ln=Tb(1),Pr(2),H₂btpa=5-(3',4'-二(四唑-5'-基)苯氧基)间苯二甲酸,bpy=4,4'-联吡啶),并用元素分析、红外光谱、X射线粉末衍射、X射线单晶衍射对其进行了表征。配合物1和2中,双核镧系金属单元通过btpa2-配体以μ₄:η¹,η²,η¹,η²的配位模式连接,形成二维网状结构,客体分子4,4'-联吡啶通过分子间的氢键作用存在于结构中。相邻的二维网通过氢键的识别作用以锁链形式拓展为三维超分子结构。室温下配合物1呈现出Tb^Ⅲ的特征荧光发射峰。     

基于双(4-(1H-咪唑-1-基)苯基)甲酮的三个锌配位聚合物的结构多样性和发光性质

通过溶剂热法合成了3个锌的配位聚合物{[Zn₂(bipmo)₂(ipa)₂]·3H₂O}_n(1)、{[Zn (bipmo)(5-OH-ipa)]·DMA·H₂O}_n(2)和{[Zn (bipmo)(5-Me-ipa)]·H₂O}_n(3),其中bipmo=双(4-(1H-咪唑-1-基)苯基)甲酮,H₂ipa=间苯二甲酸,5-OH-ipaH₂=5-羟基间苯二甲酸,5-Me-ipaH₂=5-甲基间苯二甲酸。用元素分析、红外光谱和单晶X射线衍射等技术对结构进行了表征。单晶X射线衍射分析表明,配合物1具有二重互穿的{4⁴·6²}二维网络结构,配合物2则是{6⁵·8}拓扑的二维结构,配合物3却表现为二维的{6³}拓扑网络。间苯二甲酸上5-位取代基的不同对最终的结构形成有重要的影响。此外,对化合物1~3的发光性质也进行了详细研究。     

含膦配体二铁二硫五羰基配合物的合成、表征及电催化产氢性能

本文报道了4个含膦配体二铁二硫五羰基配合物的合成和结构表征。起始配合物[Fe₂(CO)₆(μ-SCH₂CH (CH₂OOCH) S)](1)与三苯基膦、三环己基膦、三(2-甲氧基苯基)膦或三(4-三氟甲基苯基)膦和脱羰试剂Me₃NO·2H₂O反应,以59%~88%的产率制备了目标产物[Fe₂(CO)₅(L)(μ-SCH₂CH (CH₂OOCH) S)](L=PPh₃(2)、PCy₃(3)、P (2-C₆H₄OCH₃)₃(4)、P (4-C₆H₄CF₃)₃(5))。配合物2~5以元素分析、红外光谱、核磁共振以及单晶X射线衍射进行了表征。电化学性质研究表明配合物1~5均可以实现电化学催化质子还原产生氢气的功能,其中配合物1的催化产氢效率明显优于其它配合物。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.