Synthesis and characterization of star oligo/poly(2,2‐dimethyltrimethylene carbonate)s containing cholic acid moieties

Star oligo/poly(2,2‐dimethyltrimethylene carbonate)s containing cholic acid moieties were synthesized through the ring‐opening polymerization of 2,2‐dimethyltrimethylene carbonate (DTC) initiated by cholic acid with hydroxyl groups. Through the control of the feed ratio of the initiator cholic acid to the monomer DTC, a series of star oligomers/polymers with different molecular weights were obtained. The star oligomers/polymers were characterized with Fourier transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, combined size exclusion chromatography/multi‐angle laser light scattering analysis, wide‐angle X‐ray scattering, polarizing light microscopy, and differential scanning calorimetry. Compared with linear poly(2,2‐dimethyltrimethylene carbonate), these star oligo/poly(2,2‐dimethyltrimethylene carbonate)s had much faster hydrolytic degradation rates. With one of the star oligomers/polymers, a microsphere drug‐delivery system of a submicrometer size was fabricated with a very convenient ultrasonic dispersion method that did not involve toxic organic solvents. The in vitro drug release was studied. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6688‐6696, 2006     

Synthesis,characterization, and properties of tunable thermosensitive amphiphilic dendrimer‐star copolymers with Y‐shaped arms

Novel and well‐defined amphiphilic dendrimer‐star copolymer poly(ε‐caprolactone)‐block‐(poly(2‐(2‐methoxyethoxy)ethylmethacrylate‐co‐oligo(ethylene glycol) methacrylate))₂ with Y‐shaped arms were synthesized by the combination of ring‐opening polymerization (ROP) and atom transfer radical polymerization (ATRP). The investigation of thermal properties and the analysis of crystalline morphology indicate that the high‐branched structure of dendrimer‐star copolymers with Y‐shaped arms and the presence of amorphous P(MEO₂MA‐co‐OEGMA) segments together led to the complete destruction of crystallinity of the PCL segments in the dendrimer‐star copolymer. In addition, the hydrophilicity–hydrophobicity transition of the dendrimer‐star copolymer film can be achieved by altering the external temperatures. The amphiphilic copolymers can self‐assemble into spherical nanomicelles in water. Because the lower critical solution temperature of the copolymers can be adjusted by varying the ratio of MEO₂MA and OEGMA, the tunable thermosensitive properties can be observed by transmittance, dynamic laser light scattering, and transmission electron microscopy (TEM). The release rate of model drug chlorambucil from the micelles can be effectively controlled by changing the external temperatures, which indicates that these unique high‐branched amphiphilic copolymers have the potential applications in biomedical field. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Star-shaped Organic Molecules That Comprise a 1,3,5-Trisubs-tituted Benzene Core and Three Oligoaryleneethynylene Arms as Light-emitting Materials

Star‐shaped rigid molecules that comprise a 1,3,5‐trisubstitued benzene core and three oligoaryleneethynylene arms have great potential application in organic light‐emitting devices (OLEDs). Their optical and electronic properties are tuned by the star‐shaped molecular size. To reveal the relationship between the properties and structures, we perform a systemic investigation for these organic molecules. The ground and excited state molecules are studied using density functional theory (DFT), the ab initio HF, and the single excitation configuration interaction (CIS), respectively. And the electronic absorption and emission spectra are investigated with time‐dependent density functional theory (TDDFT) and Zerner's intermediate neglect of differential overlap (ZINDO) methods. The results show that the HOMOs, LUMOs, energy gaps, ionization potentials (IP), electron affinities (EA), absorption and emission spectra are controlled by the star‐shaped molecular size, which favor the hole and electron injection into OLEDs. With increasing the molecular conjugated length, the absorption and emission spectra exhibit red shifts to some extent and are in good agreement with the experimental ones. Also, the calculated emission spectra range from 330 to 440 nm. All the calculated show that the star‐shaped molecules are promising as blue light emitting materials     

Star‐shaped polymers having side chain poss groups for solid polymer electrolytes; synthesis,thermal behavior,dimensional stability,and ionic conductivity

A series of organic/inorganic hybrid star‐shaped polymers were synthesized by atom transfer radical polymerization using 3‐(3,5,7,9,11,13,15‐heptacyclohexyl‐pentacyclo[9.5.1.1^3,9.1^5,15.1^7,13]‐octasiloxane‐1‐yl)propyl methacrylate (MA‐POSS) and poly(ethylene glycol) methyl ether methacrylate (PEGMA) as monomers and octakis(2‐bromo‐2‐methylpropionoxypropyldimethylsiloxy)octasilsesquioxane as an initiator. Star‐shaped polymers with methyl methacrylate (MMA) and PEGMA moieties were also prepared for comparison purposes. Dimensionally stable freestanding film could be obtained from the hybrid star‐shaped polymer containing 26 wt % of MA‐POSS moieties although its glass transition temperature is very low, ?60.9 °C. As a result, the hybrid star‐shaped polymer electrolyte containing lithium bis(trifluoromethanesulfonyl)imide showed ionic conductivities (1.75 × 10^?5 S/cm at 30 °C), which were two orders of magnitude higher than those of the star‐shaped polymer electrolyte with MMA moieties. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Molecular dynamics of star‐shaped poly(L‐lactide)s in tetrahydrofuran as solvent monitored by fluorescence spectroscopy

Linear telechelic, α,ω‐ditelechelic, and star‐shaped tri‐, tetra‐, penta‐, and hexa‐arm poly(L ‐lactide)s (PLAs) fitted at every arm with pyrene end group have been prepared. Internal dynamics and mobility of the PLA chains in tetrahydrofuran solution at 25 °C, with regard to the number of PLA arms in one macromolecule and the individual arm average degree of polymerization, was followed by fluorescence spectroscopy. Analysis of both static and time‐resolved spectra of the star‐shaped polymers revealed dynamic segmental motion resulting in end‐to‐end cyclization, accompanied by an excimer formation. Probability and rate of the latter reaction increased with increasing number of arms and with decreasing their polymerization degree. Moreover, time‐resolved measurements revealed that for macromolecules containing few arms (2 or 3) the pyrene moieties are located in the interior of the star‐shaped PLAs, whereas in the instance of the higher number of arms (4–6) they are located at the periphery of the star‐shaped PLAs. Thus, increasing the number of arms leads to their stretching away from the center of the star‐shaped PLA macromolecule. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4586–4599, 2005     

Novel interpenetrating networks with shape‐memory properties

Novel polyesterurethane/poly(ethylene glycol) dimethacrylate (PEGDMA) interpenetrating networks (IPNs) with good shape‐memory properties were synthesized using solvent casting method. The star‐shaped oligo[(rac‐lactide)‐co‐glycolide] was coupled with isophorone diisocyanate to form a polyesterurethane network (PULG), and PEGDMA was photopolymerized to form another polyetheracrylate network. IPNs were transparent and gel content exceeded 92%. The values of strain fixity rate and strain recovery rate were above 93%. PULG and PEGDMA networks in IPNs were amorphous and did not show any characteristic diffraction peaks in X‐ray diffraction spectra. Only one glass transition temperature (T_g) of the IPNs between T_g of PEGDMA and PULG was observed, which was proportional to PEGDMA content. PULG and PEGDMA networks were miscible when PEGDMA content was below 50 wt %. The hydrophilicity, transition temperatures, and mechanical properties of IPNs could be conveniently adjusted through variation of network compositions to match the promising potential clinical or medical applications. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 768–775, 2007     

Encapsulation and release by star‐shaped block copolymers as unimolecular nanocontainers

A five‐arm star‐shaped poly(ethylene oxide) (PEO) with terminal bromide groups was used as a macroinitiator for the atom transfer radical polymerization of tert‐butyl acrylate (tBA), resulting in five‐arm star‐shaped poly(ethylene oxide)‐block‐poly(tert‐butyl acrylate) block copolymers. The polymerization proceeded in a controlled way using a copper(I)bromide/pentamethyl diethylenetriamine catalytic system in acetonitrile as solvent. The hydrolysis of the tBA blocks of the amphiphilic star‐shaped PEO‐b‐PtBA block copolymer resulted in dihydrophilic star structures. The encapsulation of the star‐block copolymers and their release properties in acid environment have been followed by UV‐spectroscopy and color changes, using the dye methyl orange as a hydrophilic guest molecule. Characterization of the structures has been done by ¹H NMR, size exclusion chromatography, MALDI‐TOF, and differential scanning calorimetry. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 650–660, 2008     

Star‐shaped and photocrosslinked poly(1,5‐dioxepan‐2‐one): Synthesis and characterization

New star‐shaped and photocrosslinked poly(1,5‐dioxepan‐2‐one) (PDXO) has been synthesized through ring‐opening polymerization initiated by SnOct₂/pentaerythritol. The star‐shaped PDXO was end‐functionalized by acrolyol chloride to form acrylate end groups. The end‐functionalized PDXO was photocrosslinked initiated by 2,2‐dimethoxy‐2‐phenylacetophenone. The gel content ranged from 80 to 99%, indicating a high degree of crosslinking. The thermal properties of the star‐shaped PDXO and the photocrosslinked PDXO were analyzed by differential scanning calorimetry. The glass‐transition temperature was determined to approximately ?32 °C for the crosslinked PDXO. The viscosity numbers were determined for star‐shaped PDXO, with reference to linear homologues. The star‐shaped PDXO had lower viscosity numbers than the linear counterparts. The crosslinked PDXO showed a rather hydrophilic surface as compared with other resorbable polyesters. The advancing contact angle was 64 ± 2, and the receding angle was 57 ± 4. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2049–2054, 2002     

Star‐shaped cyclopolymers: A new category of star polymer with rigid cyclized arms prepared by controlled cationic cyclopolymerization and subsequent microgel formation of divinyl ethers

The combination of living/controlled cationic cyclopolymerization and crosslinking polymerization of bifunctional vinyl ethers (divinyl ethers) was applied to the synthesis of core‐crosslinked star‐shaped polymers with rigid cyclized arms. Cyclopolymerization of 4,4‐bis(vinyloxymethyl)cyclohexene ( 1 ), a divinyl ether with a cyclohexene group, was investigated with the hydrogen chloride/zinc chloride (HCl/ZnCl₂) initiating system in toluene at 0 °C. The reaction proceeded quantitatively to give soluble poly( 1 )s in organic solvents. The content of the unreacted vinyl groups in the produced polymers was less than ～3 mol%, and therefore, the degree of cyclization of the polymers was determined to be ～97%. The number‐average molecular weight (M_n) of the polymers increased in direct proportion to monomer conversion and further increased on addition of a fresh monomer feed to the almost completely polymerized reaction mixture, indicating that living cyclopolymerization of 1 occurred. The chain linking reactions among the formed living cyclopolymers with 1,4‐bis(vinyloxy)cyclohexane ( 3 ) as a crosslinker in toluene at 0 °C produced core‐crosslinked star‐shaped cyclopoly( 1 )s [star‐poly( 1 )s] in high yield (100%). Dihydroxylation of the cyclohexene double bonds of star‐poly( 1 ) gave hydrophilic water‐soluble star‐shaped polymers with rigid arm structure [star‐poly( 1 )‐OH] with thermo‐responsive function in water. T_gs of star‐poly( 1 ) and star‐poly( 1 )‐OH were 135 °C and 216 °C, respectively; these values are very high as vinyl ether‐based star‐shaped polymers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1094–1102     

Synthesis of Star‐Shaped Poly(ϵ‐caprolactone)‐b‐Poly(styrene) Block Copolymer by Combining Ring‐Opening Polymerization and Atom Transfer Radical Polymerization

Newly designed star‐shaped block copolymers made of poly(?‐caprolactone) (PCL) and polystyrene (PS) were synthesized by combining ring‐opening polymerization (ROP) of ?‐caprolactone (CL) and atom transfer radical polymerization (ATRP) of styrene (St). The switch from the first to the second mechanism was obtained by selective transformation of “living” radical sites. First, tri‐ and tetrafunctional initiators were used as an initiator for the “living” ring opening polymerization (ROP) of ?‐caprolactone producing a hydroxyl terminated three or four arm star‐shaped polymer. Next, the OH end groups of PCL star branches were derivatized into 2‐bromoisobutyrate groups which gave rise to the corresponding tri‐ and tetrabromoester ended‐PCL stars; the latter served as macroinitiators for the ATRP of styrene at 110°C in the presence of CuBr/2,2‐bipyridine (Bipy) catalyst system affording star‐shaped block copolymers PCL_n‐b‐PS_n (n=3 or 4). The samples obtained were characterizated by ¹H‐NMR spectroscopy and GPC (gel permeation chromatograph). These copolymers exhibited the expected structure. The crystallization of star‐shaped block copolymers was studied by DSC (differential scanning calorimetry). The results show that when the content of the PS block increased, the T_m of the star‐shaped block copolymer decreased.     

Synthesis,characterization, and thermal properties of a novel pentaerythritol‐initiated star‐shaped poly(p‐dioxanone)

A novel star‐shaped poly(p‐dioxanone) was synthesized by the ring‐opening polymerization of p‐dioxanone initiated by pentaerythritol with stannous octoate as a catalyst in bulk. The effect of the molar ratio of the monomer to the initiator on the polymerization was studied. The polymers were characterized with ¹H NMR and ¹³C NMR spectroscopy. The thermal properties of the polymers were investigated with differential scanning calorimetry and thermogravimetric analysis. The novel star‐shaped poly(p‐dioxanone) has a potential use in biomedical materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1245–1251, 2006     

Synthesis and characterization of six‐arm star polystyrene‐block‐poly (3‐hexylthiophene) copolymer by combination of atom transfer radical polymerization and click reaction

A novel six‐arm star block copolymer comprising polystyrene (PS) linked to the center and π‐conjugated poly (3‐hexylthiophene) (P3HT) was successfully synthesized using a combination of atom transfer radical polymerization (ATRP) and click reaction. First, star‐shaped PS with six arms was prepared via ATRP of styrene with the discotic six‐functional initiator, 2,3,6,7,10,11‐hexakis(2‐bromoisobutyryloxy)triphenylene. Next, the terminal bromides of the star‐shaped PS were substituted with azide groups. Afterward, the six‐arm star block copolymer PS‐b‐P3HT was prepared using the click coupling reaction of azide‐terminated star‐shaped PS with alkynyl‐terminated P3HT. Various techniques including ¹H NMR, Fourier‐transform infrared and size‐exclusion chromatography were applied to characterize the chemical structures of the intermediates and the target block copolymers. Their thermal behaviors and optical properties were investigated using differential scanning calorimetry and UV–vis spectroscopy. Moreover, atomic force microscopy (AFM) was utilized to observe the morphology of the star block copolymer films. In comparison with two linear diblock copolymer counterparts, AFM results reveal the effect of the star block copolymer architecture on the microphase separation‐induced morphology in thin films. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis,Structural Characterization,and Electrochemical Properties of Isotruxene–Polyaniline Hybrid Systems

The synthesis, structural characterization, and electrochemical properties of a series of isotruxene–polyaniline (PANI ) hybrid systems (SITPs , SITAs , and CITs ) are reported. The syntheses were performed by in situ chemical oxidative polymerization of aniline in the presence of isotruxene additives ITP and/or ITA at specific aniline‐to‐additive molar ratios. The polymers SITPs and SITAs display granular morphology, but for the polymers CITs a spherical morphology with a diameter of 300–500 nm is found. These hybrid systems display electrochemical capacitive performance superior to those of the parent PANI prepared under the same condition (e.g., 385–463 vs. 181 F/g at 3 mA /cm² current density during charge–discharge test). Molecular (star‐shaped or hyperbranched vs. linear topology) and supramolecular (isotruxene–PANI π–π and cation–π interactions) models in accounting for the observed morphology and electrochemical properties are provided.     

Miktoarm star‐shaped poly(lactic acid) copolymer: Synthesis and stereocomplex crystallization behavior

The miktoarm star‐shaped poly(lactic acid) (PLA) copolymer, (PLLA)₂‐core‐(PDLA)₂, was synthesized via stepwise ring‐opening polymerization of lactide with dibromoneopentyl glycol as the starting material. ¹H NMR and FTIR spectroscopy proved the feasibility of synthetic route and the successful preparation of star‐shaped PLA copolymers. The results of FTIR spectroscopy and XRD showed that the stereocomplex structure of the copolymer could be more perfect after solvent dissolution treatment. Effect of chain architectures on crystallization was investigated by studying the nonisothermal and isothermal crystallization of the miktoarm star‐shaped PLA copolymer and other stereocomplexes. Nonisothermal differential scanning calorimetry and polarizing optical microscopy tests indicated that (PLLA)₂‐core‐(PDLA)₂ exhibited the fastest formation of a stereocomplex in a dynamic test due to its special structure. In isothermal crystallization tests, the copolymer exhibited the fast crystal growth rate and the most perfect crystal morphology. The results reveal that the unique molecular structure has an important influence on the crystallization of the miktoarm star‐shaped PLA copolymer. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 814–826     

Linear and star‐shaped POSS hybrid materials containing crystalline isotactic polystyrene chains

New crystalline nanostructured inorganic–organic hybrid materials containing isotactic polystyrene (iPS) are prepared by means of hydrosilylation coupling of vinyl‐terminated iPS with octakis(dimethylsilyloxy)silsesquioxane (Q₈M₈H). The number average molar mass of the iPS chains varies between 2000 and 6000 g mol^?1. As a function of the iPS/Q₈M₈H ratio, using excess reagent, the formation of linear or star‐shaped hybrid architectures is achieved. Via fractionation, it is possible to isolate well‐defined linear hybrids containing one iPS chain and seven ethyl groups per silica core (iPS‐Q₈M₈E₇) as well as star‐shaped hybrids containing up to eight iPS side chains (iPS_6‐8‐Q₈M₈). These new iPS/polyhedral oligomeric silsesquioxane hybrid materials crystallize when the number average molar mass of iPS side chain exceeds 5500 g mol^?1. The hydrosilylation coupling reaction and the resulting linear iPS‐Q₈M₈E₇ and star‐shaped iPS_6‐8‐Q₈M₈ are characterized by NMR spectroscopy, size exclusion chromatography (gel permeation chromatography), and polarized light microscopy. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Benzotrithiophene versus Benzo/Naphthodithiophene Building Blocks: The Effect of Star‐Shaped versus Linear Conjugation on Their Electronic Structures

The synthesis, characterization, and optical properties of a novel star‐shaped oligothiophene with a central rigid trithienobenzene (BTT) core and diketopyrrolopyrrole (DPP) units are reported and compared with homologous linear systems based on the benzodithiophene (BDT) and the naphthodithiophene (NDT) units end capped with DPPs. This comparison is aimed at elucidating the effect of the star‐shaped configuration versus linear conformation on the optical and electrical properties. Electronic and vibrational spectroscopies, together with transient absorption spectroscopy, scanning electronic microscopy, and DFT calculations are used to understand not only the molecular properties of these semiconductors, but also to analyze the supramolecular aggregation in these derivatives. We conclude that although the subject star‐shaped derivative is not optimal in terms of π‐conjugation, its extended BTT unit significantly favors intermolecular π‐stacking interactions, which is interesting for their applications in devices. Field‐effect transistors and solar cells were fabricated with these new molecular semiconductors and the performance difference discussed.     

Synthesis,characterization, and fluorescence of pyrene‐containing eight‐arm star‐shaped dendrimer‐like copolymer with pentaerythritol core

Novel and well‐defined pyrene‐containing eight‐arm star‐shaped dendrimer‐like copolymers were successfully achieved by combination of esterification, atom transfer radical polymerization (ATRP), divergent reaction, ring‐opening polymerization (ROP), and coupling reaction on the basis of pentaerythritol. The reaction of pentaerythritol with 2‐bromopropionyl bromide permitted ATRP of styrene (St) to form four‐arm star‐shaped polymer (PSt‐Br)₄. The molecular weights of these polymers could be adjusted by the variation of monomer conversion. Eight‐hydroxyl star‐shaped polymer (PSt‐(OH)₂)₄ was produced by the divergent reaction of (PSt‐Br)₄ with diethanolamine. (PSt‐(OH)₂)₄ was used as the initiator for ROP of ε‐caprolactone (CL) to produce eight‐arm star‐shaped dendrimer‐like copolymer (PSt‐b‐(PCL)₂)₄. The molecular weights of (PSt‐b‐(PCL)₂)₄ increased linearly with the increase of monomer. After the coupling reaction of hydroxyl‐terminated (PSt‐b‐(PCL)₂)₄ with 1‐pyrenebutyric acid, pyrene‐containing eight‐arm star‐shaped dendrimer‐like copolymer (PSt‐b‐(PCL‐pyrene)₂)₄ was obtained. The eight‐arm star‐shaped dendrimer‐like copolymers presented unique thermal properties and crystalline morphologies, which were different from those of linear poly(ε‐caprolactone) (PCL). Fluorescence analysis indicated that (PSt‐b‐(PCL‐pyrene)₂)₄ presented slightly stronger fluorescence intensity than 1‐pyrenebutyric acid when the pyrene concentration of them was the same. The obtained pyrene‐containing eight‐arm star‐shaped dendrimer‐like copolymer has potential applications in biological fluorescent probe, photodynamic therapy, and optoelectronic devices. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2788–2798, 2008     

Comparative studies on miscibility and phase behavior of linear and star poly(2‐methyl‐2‐oxazoline) blends with poly(vinylidene fluoride)

The comparative studies on the miscibility and phase behavior between the blends of linear and star‐shaped poly(2‐methyl‐2‐oxazoline) with poly(vinylidene fluoride) (PVDF) were carried out in this work. The linear poly(2‐methyl‐2‐oxazoline) was synthesized by the ring opening polymerization of 2‐methyl‐2‐oxazoline in the presence of methyl p‐toluenesulfonate (MeOTs) whereas the star‐shaped poly(2‐methyl‐2‐oxazoline) was synthesized with octa(3‐iodopropyl) polyhedral oligomeric silsesquioxane [(IC₃H₆)₈Si₈O₁₂, OipPOSS] as an octafunctional initiator. The polymers with different topological structures were characterized by means of Fourier transform infrared spectroscopy and nuclear magnetic resonance spectroscopy. It is found that the star‐shaped poly(2‐methyl‐2‐oxazoline) was miscible with poly(vinylidene fluoride) (PVDF), which was evidenced by single glass‐transition temperature behavior and the equilibrium melting‐point depression. Nonetheless, the blends of linear poly(2‐methyl‐2‐oxazoline) with PVDF were phase‐separated. The difference in miscibility was ascribed to the topological effect of PMOx macromolecules on the miscibility. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 942–952, 2006     

Synthesis,characterization, and rheological properties of hybrid titanium star‐shaped poly(n‐butyl acrylate)

The synthesis of hybrid star‐shaped polymers was carried out by atom transfer radical polymerization of n‐butyl acrylate from a well‐defined multifunctional titanium‐oxo‐cluster initiator. Conditions were identified to prevent possible side reactions among monomer, polymer, and the titanium‐oxo‐cluster ligands. Polymerizations provided linear first‐order kinetics and the evolution of the experimental molecular weight is also linear with the conversion. ¹H DOSY NMR and cleavage of the polymeric branches from the multifunctional initiator by hydrolysis were used to (i) prove the star‐shaped structure of the polymer, and (ii) demonstrate that the shoulder observed on size exclusion chromatograms is not due to a noncontrolled polymerization but to ungrafting of polymeric branches during analysis. Rheological properties of the hybrid star‐shaped poly(n‐butyl acrylate) were studied in the linear regime and show that the Ti‐oxo‐cluster not only increases significantly the viscosity of the polymer relative to its ungrafted arm but has a rheological signature which is qualitatively different from that of stars with organic cores suggesting that the Ti cluster reduces significantly the molecular mobility of the star. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Supramolecular star polymers with compositional heterogeneity

We present the synthesis of supramolecular star polymers with heterogeneous chemical compositions through potassium cation‐templated assembly of guanosine end‐functionalized random, diblock, and Y‐shaped copolymers. The assembly and disassembly processes of the synthesized star polymers have been systematically examined on changing the concentration, the temperature, the solvent, and the amount of cation using ¹H NMR, UV/vis, and CD spectroscopy. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012