The 2ν4 overtone bands of FClO3

The high resolution infrared spectrum of the mono-isotopic species F³⁵Cl¹⁶O₃ has been studied in the region of the 2ν₄ overtone, from 2560 to 2680 cm⁻¹. The perpendicular component is strong and clearly observed while the parallel component is very weak and almost completely hidden by the perpendicular one. Their origins differ by 12.6 cm⁻¹, the being located at higher wavenumbers. The band is perturbed by the anharmonic interaction between the v₄ = 2, l₄ = ?2 and v₂ = v₄ = v₅ = 1, l₄ = l₅ = ±1 excited states, both of E symmetry. In total 3157 transitions have been assigned, 83% of these to , 12% to , and 5% to . The three bands have been analyzed simultaneously, taking into account the Fermi resonance effective between the excited states of E symmetry. The ro-vibration parameters of the excited states have been obtained, including the deperturbed band origins of and , at 2628.5890(4) and 2619.3342(5) cm⁻¹, respectively. The W₂₄₅ anharmonic constant is equal to 4.0161(4) cm⁻¹. The x₄₄+g₄₄ and x₂₄+x₄₅+g₄₅ anharmonicity constants have been derived from the obtained band origins and those of ν₄ and ν₂ + ν₅.     

High-temperature UV absorption of methyl radicals behind shock waves

The absorption of ultraviolet narrow-line laser radiation by methyl radicals (CH₃) in the electronic system has been studied at high temperatures behind shock waves. Methyl radicals at high temperatures were generated by the shock heating of methyl precursors: azomethane, methyl iodide, and ethane. The spectral shape and intensity of the broadband absorption feature from 211.5 to 220 nm at high temperature (1565 K) has been measured. The absorption coefficient of CH₃ at 216.62 nm, the wavelength of peak absorption at high temperatures in the P+Q band, has been determined from 1200 to 2500 K. Additionally, the absorption coefficients of several interfering UV-absorbing combustion species (, and C₃H₆) have been determined at 216.62 nm.     

Theoretical study of CO and Pb adsorption on the Ni(1 1 1) and Ni3Al(1 1 1) surfaces

Adsorption of CO molecules and Pb atoms on the Ni(1 1 1) and Ni₃Al(1 1 1) substrates is studied theoretically within an ab initio density-functional-theory approach. Stable adsorption sites and the corresponding adsorption energies are first determined for stoichiometric surfaces. The three-fold hollow sites (fcc for Pb and hcp for CO) are found most favourable on both substrates. Next, the effect of surface alloying by a substitution of selected topmost substrate atoms by Pb or Ni atoms on the adsorption characteristics is investigated. When the surface Al atoms of the Ni₃Al(1 1 1) substrate are replaced by Ni atoms, the Pb and CO adsorption energies approach those for a pure Ni(1 1 1) substrate. The Pb alloying has a more substantial effect. On the Ni₃Al(1 1 1) substrate, it reduces considerably adsorption energy of CO. On the Ni(1 1 1) substrate, CO binding strengthens slightly upon the formation of the Ni(1 1 1)p(2×2)-Pb surface alloy, whereas it weakens drastically when the Ni(1 1 1)-Pb surface alloy is formed.     

Surface defect states of CdTexS1 − x quantum dots

Properties of surface defect states of CdTe_xS_1 − x quantum dots with an average diameter of 7 nm are investigated experimentally. The stoichiometric ratio is found to be for by use of the energy dispersive analysis of x-ray. The photoluminescence spectrum, the photoluminescence excitation spectrum, and the surface passivation are adopted to characterize the properties of surface defect states. The energy levels of surface defect states of CdTe_xS_1 − x quantum dots are also determined.     

On the optical properties of amorphous Ge-Ga-Se-KBr films prepared by pulsed laser deposition

Amorphous thin films (1 − x)(4GeSe₂-Ga₂Se₃)-xKBr (x = 0, 0.1, 0.2, 0.3) were prepared by the pulsed laser deposition (PLD) technique. The optical parameters were calculated using the Swanepoel method from the optical transmission spectra. The optical band gap () of the studied films increased while the index of refraction decreased when increased the content of KBr. The Tauc slopes were discussed as an indicator of the degree of structural randomness of amorphous semiconductors. The index of refraction decreased and increased after annealing of as-deposited films below the glass transition temperature. The thermal-bleaching and thermal- contraction effects were observed, which are discussed in relation to the reduction in the density of homopolar bonds confirmed by the Raman spectra analysis and the decreased amount of fragments of the as-deposited films, respectively.     

Gas-phase detection of discharge-generated DSOD

We report the first spectroscopic detection of perdeuterated 1-oxadisulfane, DSOD, generated in a radio-frequency plasma of D₂S and D₂O. The chain molecule DSOD produces a perpendicular-type spectrum, with well-known spectral features encountered in previous studies of geometrically related molecules, such as compact Q-branches, which are clearly recognizable. The arrangement of the transitions shaping the Q-branches usually provides sufficient proof for a clear-cut detection of a chain molecule such as DSOD. Guided by quantum chemical calculations, we have located the band center of the -branch of DSOD in the frequency region near 466.5 GHz using the Cologne terahertz spectrometer. This -branch displays both b- and c-type spectra, quite analogous to the behavior of the corresponding -branch of HSOH. In addition, we have been able to detect an internal rotational splitting of ∼0.5 MHz for c-type transitions of the -branch, which lends independent support to our present assignment. From the measurements performed on Q-branches, we derive the following differences in rotational constants: A−(B+C)/2=93331.001(15) MHz, and (B−C)/4=172.95923(29) MHz, in excellent agreement with theoretical predictions.     

Gas phase electronic spectrum of propadienylidene C3H2

The rotationally resolved vibronic bands in the forbidden electronic transition of the cumulene carbene C₃H₂ have been observed in the gas phase by cavity ring down absorption spectroscopy through a supersonic planar plasma with allene as precursor. The band detected in the 16 223 cm⁻¹ region is a result of vibronic interaction and is assigned to a combination of a₁ and b₂ vibrations with a frequency around 2250 cm⁻¹. Another vibronic band near 15 810 cm⁻¹ has an unusual rotational structure because the K_a = 0-1 subband is absent. It is assigned to a combination of a₁ and b₁ vibrations, ∼1850 cm⁻¹, which borrow intensity from the near lying state due to a-type Coriolis coupling. A rotational analysis using a conventional Hamiltonian for an asymmetric top molecule yields molecular constants for the vibrational excited levels of the ùA₂ state, which were used for the determination of the geometry. The stronger transition of C₃H₂, measured in a neon matrix in the 16 161-24 802 cm⁻¹ range, was not detected. The reason for this is a short lifetime of the state, leading to line broadening.     

A cross-sectional scanning tunneling microscopy study of IrO2 rutile single crystals

Rutile iridium dioxide (IrO₂) surfaces were studied by cross-sectional scanning tunneling microscopy (XSTM). Atomically flat surfaces prepared by in situ ultra high vacuum cleaving of crystalline platelets of thicknesses <50 μm were successfully demonstrated. In addition to (1 1 0) surface, several vicinal planes, e.g., (1 2 0), (1 3 0) and , were also examined. The cleaved planes are close to bulk-terminated surfaces with predominant [0 0 1]-oriented bridge oxygen rows. Unlike TiO₂, bright oxygen rows are imaged and oxygen defects appear as dim species. Our studies show that XSTM is a viable technique to study oxide surfaces that are otherwise difficult to prepare.     

High-resolution FTIR and MMW study of the v4 = 2 (A1, E) excited state of NF3 near 985 cm: the axial ground state rotational constants derived by the “loop-method”

The two substates v₄ = 2⁰ (A₁, 983.702 cm⁻¹) and v₄ = 2^±2 (E, 986.622 cm⁻¹) of the oblate symmetric top molecule, ¹⁴NF₃, have been studied by high-resolution (2.5 × 10⁻³ cm⁻¹) infrared spectroscopy of the overtones and 2ν₄ − ν₄ hot bands. Transitions of the overtone, the hot band, and the previously measured fundamental band were combined to yield 585 ground state combination differences differing in K by ±3, with K_max = 36. Using the “loop-method,” a fit (standard deviation σ = 0.320 × 10⁻³ cm⁻¹) provided a complete set of the hitherto not experimentally known axial ground state constants. In units of cm⁻¹ these have the following values: . Upper state parameters were determined using a vibrationally isolated model. Considering l (2, 2) and l (2, −1) interactions between the v₄ = 2⁰ and v₄ = 2^±2 substates and effects accounting for the l (4, −2) interactions within the kl = −2 levels, 25 upper state parameters were obtained by fitting 2747 IR data (1842 transitions, 905 deduced energies, J_max = 42, K_max = 39) with σ_IR = 0.353 × 10⁻³ cm⁻¹. Moreover, millimeter-wave spectroscopy furnished 86 transitions (J_max = 16, K_max = 13) measured on the v₄ = 2 excited state. A merged fit, refining 24 parameters using the described model gave σ_IR = 0.365 × 10⁻³ cm⁻¹ andσ_MMW = 0.855 × 10⁻⁶ cm⁻¹ (26 kHz). The anharmonicity constants (in cm⁻¹) are x₄₄ = −0.84174 (2) and g₄₄ =  + 0.73014 (1). In addition to this model, the D, Q, and L reductions of the rovibrational Hamiltonian were tested. Standard deviations σ_IR = 0.375 × 10⁻³ cm⁻¹ and σ_MMW = 0.865 × 10⁻⁶ cm⁻¹ were obtained for both D and L reductions, and σ_IR = 0.392 × 10⁻³ cm⁻¹ and σ_MMW = 0.935 × 10⁻⁶ cm⁻¹ for Q reduction. The unitary equivalence of the majority of the 18 tested relations between the derived parameters was satisfactorily fulfilled. This confirms that the v₄ = 2 excited vibrational state can be considered in reasonable approximation to be isolated.     

The formaldehyde cation: Rovibrational energy level structure and Coriolis interaction near the adiabatic ionization threshold

Rotationally resolved pulsed-field-ionization zero-kinetic-energy photoelectron spectra of the 0⁰, 6¹ and 4¹ vibrational levels of the ground electronic state of the formaldehyde cation were recorded using a resonant three-color three-photon excitation scheme. The first adiabatic ionization energy of CH₂O (87793.33(1.30) cm⁻¹) and the rigid-rotor rotational constants (A⁺ = 8.874(8) cm⁻¹, B⁺ = 1.342(15) cm⁻¹, C⁺ = 1.148(18) cm⁻¹) of the vibronic ground state of CH₂O⁺ were derived. A strong a-type Coriolis interaction between the 6¹ and 4¹ vibrational levels was observed. The Coriolis coupling parameter and the deperturbed fundamental vibrational frequencies of the in-plane-rocking mode ν₆ and the out-of-plane bending mode ν₄ were determined to be 8.70(10) cm⁻¹, 823.67(30) cm⁻¹ and 1036.50(30) cm⁻¹, respectively. The intensity distribution of the photoelectron spectra was analyzed in the realm of a simple photoionization model.     

Absorption spectra of AsH2 radical in 435-510 nm by cavity ringdown spectroscopy

The absorption spectra of jet-cooled AsH₂ radicals were recorded in the wavelength range of 435-510 nm by cavity ringdown spectroscopy. The AsH₂ radicals were produced by pulsed DC discharge in a molecular beam of a mixture of AsH₃, SF₆, and argon. Seven vibronic bands with fine rotational structures have been identified and assigned as the , , and (n = 1-3) bands of the electronic transition. Based on the previous studies of AsH₂ radical, rotational assignments and rotational term values for each band were obtained, and the molecular parameters including vibrational constants, rotational constants, centrifugal distortion constants, and spin-rotation interaction constants were also determined.     

The 2ν5 overtone bands of perchloryl fluoride

The high-resolution infrared spectra of the monoisotopic species F³⁵Cl¹⁶O₃, F³⁷Cl¹⁶O₃, F³⁵Cl¹⁸O₃ and F³⁷Cl¹⁸O₃ have been studied in the region of the 2ν₅ overtones, from 1100 to 1200 cm⁻¹. Both the parallel and the perpendicular components are clearly observed in the spectra, their origins differing by about 0.4 cm⁻¹. In each spectrum about 2000 transitions have been assigned, 35% of them belonging to . The parallel and perpendicular bands in each manifold have been analyzed separately since no evidence of perturbations has been observed. The rovibration parameters of the v₅ = 2, l₅ = 0 and v₅ = 2, l₅=?2 excited states have been obtained. For the four species combining the and band origins with those of the ν₅ fundamentals the harmonic wavenumbers, , and the x₅₅ and g₅₅ anharmonicity constants have also been derived.     

Nanophases in mechanochemically synthesized AgI-CuI system: structure, phase stability and phase transitions

Nanoscale crystallites of Ag-rich (Ag_1−xCu_xI, x=0.05, 0.10, 0.15 and 0.25), Cu-rich (Cu_1-yAg_yI, y=0.05, 0.10, 0.15 and 0.25) and intermediate Ag_1-xCu_xI (x=0.50) solid solutions and end members AgI, CuI with sizes in the range of 46-13 nm were synthesized by attrition at ambient temperature in a soft mechanochemical reaction (MCR) of Ag, Cu and I. Monophasic γ-AgI (zincblende, ) with disordered Ag⁺ sublattice and the crystallite size of about ∼31 nm was realized in the case of Ag_0.75Cu_0.25I (x=0.25) composition. Lattice parameter decreases linearly from 649 to 604 pm with increasing Cu concentration in the AgI-CuI system validating Vegard's law. Smallest size (∼13 nm) agglomerated nanocrystals were realized in the Cu-rich composition Cu_0.75Ag_0.25I (), while unagglomerated uniform-sized (∼17 nm) and spherical shape nanocrystallites of Ag_0.50Cu_0.50I () with maximum strain were synthesized for sensor applications using MCR. Differential scanning calorimetry study shows the systematic changes in the phase transition temperature with Cu substitution. Ag-rich composition posses less enthalpy (ΔH (x or Cu=0.05, 0.10, 0.15, 0.25)=6.0, 6.11, 6.6, 6.3 in kJ/mol) and entropy (ΔS (y or Ag=0.05, 0.10, 0.15, 0.25)=14.15, 14.1, 15.03, 13.6 in J/mol K) when compared to undoped AgI () implying greater thermal stability of γ-phase due to Cu-strengthened Ag-I bond. Enhanced entropy () in Cu_0.75Ag_0.25I (Cu-rich) solid solutions relative to CuI () indicates Ag-induced cation disorder. Fifteen percent Ag-doped CuI (Cu_0.85Ag_0.15I) nanocrystals apparently behave like microscopic p-n junctions with currents in the range of 10⁻⁶-10⁻⁸ A characterized by a non-linear I-V curve.