Structural studies of 1-butyl-3-methylimidazolium tetrafluoroborate/TX-100/ p-xylene ionic liquid microemulsions.

The ionic liquid (IL) 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) forms nonaqueous microemulsions with p-xylene, with the aid of the nonionic surfactant TX-100. The phase behavior of the ternary system is investigated, and three microregions of the microemulsions-ionic liquid-in-oil (IL/O), bicontinuous, and oil-in-ionic liquid (O/IL)-are identified by conductivity measurements, according to percolation theory. On the basis of a phase diagram, a series of IL/O microemulsions are chosen and characterized by dynamic light scattering (DLS). The size of aggregates increases on increasing the amount of added polar component (bmimBF(4)), which is a similar phenomenon to that observed for typical water-in-oil (W/O) microemulsions, suggesting the formation of IL/O microemulsions. The microstructural characteristics of the microemulsions are investigated by FTIR and 1H NMR spectroscopy. The results indicate that the interaction between the electronegative oxygen atoms of the oxyethylene (OE) units in TX-100 and the electropositive imidazolium ring may be the driving force for the solubilization of bmimBF4 into the core of the TX-100 aggregates. In addition, the micropolarity of the microemulsions is investigated by using methyl orange (MO) as a UV/Vis spectroscopic probe. A relatively constant polarity of the microemulsion droplets is obtained in the IL microemulsion. Finally, a plausible structure for the IL/O microemulsion is presented.     

States of water located in the continuous organic phase of 1-butyl-3-methylimidazolium tetrafluoroborate/Triton X-100/triethylamine reverse microemulsions.

We demonstrate a novel ionic liquid (IL) microemulsion, consisting of 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) and nonionic surfactant Triton X-100 prepared in triethylamine which is used either as an organic solvent or a Lewis base. The effects of small amounts of added water on the microstructure of the IL microemulsion are investigated by various techniques. UV/Vis spectroscopic analysis and FTIR spectra indicate that these water molecules are not solubilized into the IL pools of the microemulsions. 1H NMR spectra further show that the added water binds with triethylamine to form a surrounding OH- base environment. Some of OH- ions enter the palisade layers of the IL microemulsions and a continuous base interface is created. The unique solubilization behavior of water reveals that it is possible to use the triethylamine microemulsions as a template to prepare metal hydroxides as well as metal oxides in the microemulsions, which is not possible when using traditional microemulsions.     

The effect of water on the microstructure of 1-butyl-3-methylimidazolium tetrafluoroborate/TX-100/benzene ionic liquid microemulsions

The ionic liquid (IL) 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]) forms nonaqueous microemulsions with benzene with the aid of nonionic surfactant TX-100. The phase diagram of the ternary system was prepared, and the microstructures of the microemulsion were recognized. On the basis of the phase diagram, a series of ionic liquid-in-oil (IL/O) microemulsions were chosen and characterized by dynamic light scattering (DLS), which shows a similar swelling behavior to typical water-in-oil (W/O) microemulsions. The existence of IL pools in the IL/O microemulsion was confirmed by UV/Vis spectroscopic analysis with CoCl2 and methylene blue (MB) as the absorption probes. A constant polarity of the IL pool is observed, even if small amounts of water are added to the microemulsion, thus suggesting that the water molecules are solubilized in the polar outer shell of the microemulsion, as confirmed by FTIR spectra. 1H NMR spectroscopic analysis shows that these water molecules interact with the electronegative oxygen atoms of the oxyethylene (OE) units of TX-100 through hydrogen-bonding interactions, and the electronegative oxygen atoms of the water molecules attract the electropositive imidazolium rings of [bmim][BF4]. Hence, the water molecules are like a glue that stick the IL and OE units more tightly together and thus make the microemulsion system more stable. Considering the unique solubilization behavior of added water molecules, the IL/O microemulsion system may be used as a medium to prepare porous or hollow nanomaterials by hydrolysis reactions.     

Decrease of droplet size of the reverse microemulsion 1-butyl-3-methylimidazolium tetrafluoroborate/Triton X-100/cyclohexane by addition of water

In the present contribution, results concerning the role of small amounts of water in the 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4)-in-cyclohexane ionic liquid (IL) reverse microemulsions are reported. Dynamic light scattering (DLS) revealed that the size of microemulsion droplets decreased remarkably with increasing water content although water is often used as a polar component to swell reverse microemulsions. It was thus deduced that the number of microemulsion droplets was increased which was confirmed by conductivity measurements. The states of dissolved water were investigated by Fourier transform IR (FTIR) spectroscopic analysis showing that water molecules mainly act as bound water. 1H NMR along with two-dimensional rotating frame nuclear Overhauser effect (NOE) experiments (ROESY) further revealed that water molecules were mainly located in the periphery of the polar core of the microemulsion droplets and behave like a chock being inserted in the palisade layer of the droplet. This increased the curvature of the surfactant film at the IL/cyclohexane interface and thus led to the decrease of the microemulsion droplet size. The order of surfactant molecules arranged in the interface film was increased and thus induced a loss of entropy. Isothermal titration calorimetry (ITC) indicated that an enthalpy increase compensates for the loss of entropy during the process of microstructural transition.     

Studies on the micropolarities of bmimBF4/TX-100/toluene ionic liquid microemulsions and their behaviors characterized by UV-visible spectroscopy

Ionic liquids (ILs), 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4), were substituted for polar water and formed nonaqueous microemulsions with toluene by the aid of nonionic surfactant TX-100. The phase behavior of the ternary system was investigated, and microregions of bmimBF4-in-toluene (IL/O), bicontinuous, and toluene-in-bmimBF4 (O/IL) were identified by traditional electrical conductivity measurements. Dynamic light scattering (DLS) revealed the formation of the IL microemulsions. The micropolarities of the IL/O microemulsions were investigated by the UV-vis spectroscopy using the methyl orange (MO) and methylene blue (MB) as absorption probes. The results indicated that the polarity of the IL/O microemulsion increased only before the IL pools were formed, whereas a relatively fixed polar microenvironment was obtained in the IL pools of the microemulsions. Moreover, UV-vis spectroscopy has also shown that ionic salt compounds such as Ni(NO3)2, CoCl2, CuCl2, and biochemical reagent riboflavin could be solubilized into the IL/O microemulsion droplets, indicating that the IL/O microemulsions have potential application in the production of metallic or semiconductor nanomaterials, and in biological extractions or as solvents for enzymatic reactions. The IL/O microemulsions may have some expected effects due to the unique features of ILs and microemulsions.     

Microregion detection of ionic liquid microemulsions

Nonaqueous ionic liquid (IL) microemulsion consisting of IL, 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF(4)), surfactant TX-100, and toluene was prepared and the phase behavior of the ternary system was investigated. Electrical conductivity measurement was used for investigating the microregions of the nonaqueous IL microemulsions. On the basis of the percolation theory, the bmimBF(4)-in-toluene (IL/O), bicontinuous, and toluene-in-bmimBF(4) (O/IL) microregions of the microemulsions were successfully identified using insulative toluene as the titration phase. However, this method was invalid when conductive bmimBF(4) acted as the titration phase. The microregions obtained by conductivity measurements were further proved by electrochemical cyclic voltammetry experiments. The results indicated that the conductivity method was feasible for identifying microstructures of the nonaqueous IL microemulsions.     

Heavy metals adsorption by novel EDTA-modified chitosan-silica hybrid materials

Ionic liquid based microemulsions were characterized by absorption solvatochromic shifts, (1)H NMR and kinetic measurements in order to investigate the properties of the ionic liquid within the restricted geometry provided by microemulsions and the interactions of the ionic liquid with the interface. Experimental results show a significant difference between the interfaces of normal water and the new ionic liquid microemulsions. Absorption solvatochromic shift experiments and kinetic studies on the aminolysis of 4-nitrophenyl laurate by n-decylamine show that the polarity at the interface of the ionic liquid in oil microemulsions (IL/O) is higher than at the interface of water in oil microemulsions (W/O) despite the fact that the polarity of [bmim][BF(4)(-)] is lower than the polarity of water. (1)H NMR experiments showed that an increase in the ionic liquid content of the microemulsion led to an increase in the interaction between [bmim][BF(4)(-)] and TX-100. The reason for the higher polarity of the microemulsions with the ionic liquid can be explained in terms of the incorporation of higher levels of the ionic liquid at the interface of the microemulsions, as compared to water in the traditional systems.     

Tween80/BmimPF6/醇/甲苯体系的相行为

以环境友好型的Tween80为表面活性剂, 以醇(乙醇、正丁醇、正己醇、正辛醇、正癸醇和异戊醇)为助表面活性剂, 对离子液体1-丁基-3-甲基咪唑六氟磷酸盐(bmimPF6)和甲苯进行了微乳化实验, 绘制了不同条件下Tween80离子液体的微乳体系的拟三元相图, 考察了醇的种类、含量对单相微乳区的影响, 并用电导法研究了在乙醇为助表面活性剂情况下, 单相微乳区的结构转变. 结果表明, 当醇(异戊醇)固定时, 随着表面活性剂/醇的质量比增加, 单相微乳区的面积逐渐增大; 不同链长的直链醇对单相微乳区的面积影响与该醇在离子液体中的溶解情况有关, 单相微乳区的面积随着直链醇链长的增加而越小; 当乙醇作助表面活性剂时, 所得到的单相微乳区的面积最大, 且单相微乳区存在着O/IL(oil-in-ionic liquid)、双连续相和IL/O(ionic liquid-in-oil)三种微结构. 尤其对离子液体微乳体系的电导随油的含量的增加而最初增大的现象进行了解释, 这一现象是由于油主要起到减少离子液体中离子对或离子的积聚, 提高带电离子淌度的作用.     

Interaction of ionic liquid with water in ternary microemulsions (Triton X-100/water/1-butyl-3-methylimidazolium hexafluorophosphate) probed by solvent and rotational relaxation of coumarin 153 and coumarin 151

The interaction of ionic liquid with water in 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF6])/Triton X-100 (TX-100)/H2O ternary microemulsions, i.e., "[bmim][PF6]-in-water" microregions of the microemulsions, has been studied by the dynamics of solvent and rotational relaxation of coumarin 153 (C-153) and coumarin 151 (C-151). The variation of the time constants of solvent relaxation of C-153 is very small with an increase in the [bmim][PF6]/TX-100 ratio (R). The rotational relaxation time of C-153 also remains unchanged in all micremulsions of different R values. The invariance of solvation and rotational relaxation times of C-153 indicates that the position of C-153 remains unaltered with an increase in R and probably the probe is located at the interfacial region of [bmim][PF6] and TX-100 in the microemulsions. On the other hand, in the case of C-151, with an increase in R the fast component of the solvation time gradually increases and the slow component gradually decreases, although the change in solvation time is small in comparison to that of microemulsions containing common polar solvents such as water, methanol, acetonitrile, etc. The rotational relaxation time of C-151 increases with an increase in R. This indicates that with an increase in the [bmim][PF6] content the number of C-151 molecules in the core of the microemulsions gradually increases. In general, the solvent relaxation time is retarded in this room temperature ionic liquid/water-containing microemulsion compared to that of a neat solvent, although retardation is very small compared to that of the solvent relaxation time of the conventional solvent in the core of the microemulsions.     

Femtosecond solvation dynamics in a neat ionic liquid and ionic liquid microemulsion: excitation wavelength dependence

Solvation dynamics in a neat ionic liquid, 1-pentyl-3-methyl-imidazolium tetra-flouroborate ([pmim][BF4]) and its microemulsion in Triton X-100 (TX-100)/benzene is studied using femtosecond up-conversion. In both the neat ionic liquid and the microemulsion, the solvation dynamics is found to depend on excitation wavelength (lambda(ex)). The lambda(ex) dependence is attributed to structural heterogeneity in neat ionic liquid (IL) and in IL microemulsion. In neat IL, the heterogeneity arises from clustering of the pentyl groups which are surrounded by a network of cation and anions. Such a nanostructural organization is predicted in many recent simulations and observed recently in an X-ray diffraction study. In an IL microemulsion, the surfactant (TX-100) molecules aggregate in form of a nonpolar peripheral shell around the polar pool of IL. The micro-environment in such an assembly varies drastically over a short distance. The dynamic solvent shift (and average solvation time) in neat IL as well as in IL microemulsions decreases markedly as lambda(ex) increases from 375 to 435 nm. In a [pmim][BF4]/water/TX-100/benzene quaternary microemulsion, the solvation dynamics is slower than that in a microemulsion without water. This is ascribed to the smaller size of the water containing microemulsion. The anisotropy decay in an IL microemulsion is found to be faster than that in neat IL.     

四-(4-苯基磺酸基)卟啉在反相微乳内相中的聚集行为

本文系统研究了四-(4-苯基磺酸基)卟啉(TPPS)在由聚乙二醇辛基苯基醚（TX-100）构筑的反相微乳液内相中的聚集行为。通过改变反相微乳水相液滴的pH值、粒径及TPPS的浓度,发现在反相乳液内相中TPPS的表观pKa明显小于在水溶液中的pKa（4.9）,并且,TPPS的表观pKa随着水相液滴粒径的减小而降低;当水相液滴的pH > pKa时,TPPS以去质子化单体H2TPPS4-形式存在,而当pH < pKa时,TPPS以质子化单体H4TPPS2-和J-聚集两种形式存在,并且TPPS浓度的增大,促进了H4TPPS2-向J-聚集转变;在pH值不变的条件下,随着水相液滴粒径的增大,TPPS的存在状态由H2TPPS4-向H4TPPS2-转变,并形成J-聚集。     

Effect of polyethylene glycol (PEG-400) on the 1-butyl-3-methylimidazolium tetrafluoroborate-in-cyclohexane ionic liquid microemulsion

The effect of a common polymer, polyethylene glycol with molecular weight of 400 (PEG-400) on the microstructure of 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF₄)/Triton X-100/cyclohexane ionic liquid (IL) reverse microemulsion has been investigated. The addition of PEG-400 leaded to the linear increase of the microemulsion droplet size, in accordance with the observation of dispersed phase, showing that PEG-400 was only solubilized into the polar interior of the IL microemulsions. FTIR spectroscopic analysis indicated that the addition of PEG-400 decreased the electrostatic interaction between the oxygen atoms of OE units and the positive electrical charged imidazolium cation of bmimBF₄. At the same time, the oxygen atoms of PEG-400 can also interact with the imidazolium cation. These results suggested that small amounts of PEG-400 entered the palisade layers of the IL microemulsion. The conductivity of the IL reverse microemulsions was decreased owing to the dilution of conducting polar cores by the addition of insulative PEG-400, indicating that PEG-400 was only solubilized into the reverse IL microemulsion interior. The conclusion was further supported by viscosity measurement.     

Solubilization of Styrene and Acrylamide Monomers in Microemulsions

Abstract

Phase diagrams of sodium dodecyl sulfonate (DS)/n‐butanol/styrene/water systems with variable amounts of styrene were constructed at 40°C, and the effects of styrene on microemulsion stability were studied. The solubilization of styrene in these O/W microemulsion systems was investigated by ¹H NMR methods. The results show that the solubilization site shifts from the palisade layer to the inner core of microemulsion droplets when the molar fraction of styrene reaches 0.312. The solubilization of acrylamide in cetyltrimethylmethyl ammonium bromide (CTAB)/n‐butanol/10% n‐octane/water reverse microemulsions (W/O) was studied with a ¹³C NMR method. It was found that the acrylamide was mainly solubilized in the Stern layer of droplets at low acrylamide levels. However, when the mole fraction of acrylamide approaches 0.428, the acrylamide penetrates into the palisade layer and is distributed along the hydrocarbon chain of the surfactant.     

DPD Simulation on the Transformation and Stability of O/W and W/O Microemulsions

The dissipative particle dynamics simulation method is adopted to investigate the microemulsion systems prepared with surfactant (H1T1), oil (O) and water (W), which are expressed by coarse-grained models. Two topologies of O/W and W/O microemulsions are simulated with various oil and water ratios. Inverse W/O microemulsion transform to O/W microemulsion by decreasing the ratio of oil-water from 3:1 to 1:3. The stability of O/W and W/O microemulsion is controlled by shear rate, inorganic salt and the temperature, and the corresponding results are analyzed by the translucent three-dimensional structure, the mean interfacial tension and end-to-end distance of H1T1. The results show that W/O microemulsion is more stable than O/W microemulsion to resist higher inorganic salt concentration, shear rate and temperature. This investigation provides a powerful tool to predict the structure and the stability of various microemulsion systems, which is of great importance to developing new multifunctional microemulsions for multiple applications.     

Studies on the reaction pathway of arsenate adsorption at water-TiO2 interfaces using density functional theory

A perylenetetracarboxylic diimide (PDI) compound with an attached hydrophilic polyoxyethylene group at the imide nitrogen position was designed and synthesized. Photoinduced electron and energy transfer between coumarin 153 (C-153) and PDI in a ternary microemulsion with an ionic liquid (bmimPF(6)/TX-100/H(2)O) were investigated by steady state electronic absorption and fluorescence spectroscopy. The results revealed that both PDI and C-153 resided at the interface between the surfactant TX-100 and the ionic liquid bmimPF(6) in the ternary microemulsions. The absorption spectra suggested no interactions between C-153 and PDI in the ground states, but the fluorescence spectra revealed the presence of an efficient electron transfer and a less efficient energy transfer from C-153 to PDI. Moreover, the electron transfer was much more efficient in microemulsions than that in homogeneous conventional organic solvents due to the unique micro-environment of the microemulsion.     

Second virial coefficient of bmimBF4/triton X-100/ cyclohexane ionic liquid microemulsion as investigated by microcalorimetry

The second virial coefficient of the ionic liquid (IL) microemulsion was obtained for the first time using microcalorimetry. The heat of dilution of the microemulsion solutions was measured by isothermal titration microcalorimetry (ITC), and the second virial coefficient was derived from the heat of dilution and the number density of the IL microemulsion solutions on the basis of a hard-sphere interaction potential assumption and as a function of the second-order polynomial. The validity of the second virial coefficient was confirmed by the percolation behavior of different ionic liquid microemulsion solutions of Triton X-100 in cyclohexane with or without added salts. The information obtained from the second virial coefficient shows that the interactions between ionic liquid microemulsion droplets are much stronger than those for traditional microemulsions, which may be attributed to the relatively larger size of the microemulsion droplets.     

A novel water-in-ionic liquid microemulsion and its interfacial effect on the activity of laccase

It is of great significance to develop an appropriate water-in-ionic liquid (W/IL) microemulsion suitable for the expression of the catalytic activity of a given enzyme. In this paper, the phase diagram of a new AOT/Triton X-100/H(2)O/[Bmim][PF(6)] pseudo ternary system is presented. With the aid of nonionic surfactant Triton X-100, AOT could be dissolved in hydrophobic ionic liquid [Bmim][PF(6)], forming a large single phase microemulsion region. The water-in-[Bmim][PF(6)] (W/IL) microemulsion domain was identified electrochemically by using K(3)Fe(CN)(6) as a probe. The existence of W/IL microemulsions was demonstrated spectrophotometrically by using CoCl(2) as a probe. New evidences from the FTIR spectroscopic study, which was first introduced to the W/IL microemulsion by substituting D(2)O for H(2)O to eliminate the spectral interference, demonstrated that there existed bulk water at larger ω(0) values (ω(0) was defined as the molar ratio of water to the total surfactant) in the W/IL microemulsion, which had remained unclear before. In addition to the inorganic salts, biomacromolecule laccase could be solubilized in the W/IL microemulsion. The laccase hosted in the microemulsion exhibited a catalytic activity and the activity could be regulated by the composition of the interfacial membrane.     

Interaction of ionic liquid with water with variation of water content in 1-butyl-3-methyl-imidazolium hexafluorophosphate ([bmim][PF6])/TX-100/water ternary microemulsions monitored by solvent and rotational relaxation of coumarin 153 and coumarin 490

The interaction of water with room temperature ionic liquid (RTIL) [bmim][PF6] has been studied in [bmim][PF6]/TX-100/water ternary microemulsions by solvent and rotational relaxation of coumarin 153 (C-153) and coumarin 490 (C-490). The rotational relaxation and average solvation time of C-153 and C-490 gradually decrease with increase in water content of the microemulsions. The gradual increase in the size of the microemulsion with increase in w0 (w0=[water]/[surfactant]) is evident from dynamic light scattering measurements. Consequently the mobility of the water molecules also increases. In comparison to pure water the retardation of solvation time in the RTIL containing ternary microemulsions is very less. The authors have also reported the solvation time of C-490 in neat [bmim][PF6]. The solvation time of C-490 in neat [bmim][PF6] is bimodal with time constants of 400 ps and 1.10 ns.     

Layered structure of room-temperature ionic liquids in microemulsions by multinuclear NMR spectroscopic studies

Microemulsions form in mixtures of polar, nonpolar, and amphiphilic molecules. Typical microemulsions employ water as the polar phase. However, microemulsions can form with a polar phase other than water, which hold promise to diversify the range of properties, and hence utility, of microemulsions. Here microemulsions formed by using a room‐temperature ionic liquid (RTIL) as the polar phase were created and characterized by using multinuclear NMR spectroscopy. ¹H, ¹¹B, and ¹⁹F NMR spectroscopy was applied to explore differences between microemulsions formed by using 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([bmim][BF₄]) as the polar phase with a cationic surfactant, benzylhexadecyldimethylammonium chloride (BHDC), and a nonionic surfactant, Triton X‐100 (TX‐100). NMR spectroscopy showed distinct differences in the behavior of the RTIL as the charge of the surfactant head group varies in the different microemulsion environments. Minor changes in the chemical shifts were observed for [bmim]⁺ and [BF₄]^? in the presence of TX‐100 suggesting that the surfactant and the ionic liquid are separated in the microemulsion. The large changes in spectroscopic parameters observed are consistent with microstructure formation with layering of [bmim]⁺ and [BF₄]^? and migration of Cl^? within the BHDC microemulsions. Comparisons with NMR results for related ionic compounds in organic and aqueous environments as well as literature studies assisted the development of a simple organizational model for these microstructures.     

Comparison of electrodeposition of silver in ionic liquid microemulsions

Both ionic liquid (IL) and water are typical green solvents and have high electric conductivity. The use of IL microemulsions as templates and media for electrochemical synthesis of nano-materials is attractive. In this work, water-in-ionic liquid (W/IL) microemulsion and ionic liquid-in-water (IL/W) microemulsion were prepared, in which hydrophobic ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate was used. The cyclic voltammetry (CV) behavior and electroplating in the W/IL and IL/W microemulsion systems containing silver nitrate were investigated for the first time. Both the CV curves exhibit the presence of reduction and oxidation peaks corresponding to the deposition and dissolution of silver from the two microemulsion systems. However, the CV obtained from IL/W microemulsion system exhibits a crossover, which is different from that obtained from W/IL microemulsion system. The electrodeposits obtained from W/IL microemulsion system are nano-granular, while those obtained from IL/W microemulsion system are planar. These results are attributed to the different microenvironments of the microemulsions.