Electrodeposition of cobalt oxide films from carbonate solutions containing Co(II)–tartrate complexes

An electrochemical procedure of anodic deposition of cobalt oxyhydroxide film on a glassy carbon substrate in an alkaline medium (i.e. pH 11.6) is described. The electrodeposited film was obtained either by voltage cycling or by potentiostatic conditions using non-deaerated 0.1 M Na₂CO₃ solutions containing 40 mM tartrate ions and 4 mM CoCl₂. The effects on the film formation and growth, such as tartrate–cobalt ratio, pH, applied potential, etc. were widely evaluated. The electrodeposition process, under anodic conditions and moderately alkaline solutions, most likely involves a redox transition Co(II)→Co(III)/Co(IV) with destruction of the tartrate complex and formation of insoluble oxide/hydroxide cobalt species on the glassy carbon surface. The resulting cobalt oxyhydroxide films were characterised by cyclic voltammetry (CV) in 0.1 M NaOH solutions and by scanning electron microscopy (SEM) analysis after different strategies of preparation and various electrochemical treatments. The electrochemical activity of the deposited films was checked using various organic molecules as model compounds.     

Electropolymerization of iron tetra(<Emphasis Type="Italic">o</Emphasis>-aminophenyl)porphyrin from aqueous solution and the electrocatalytic behavior of modified electrode

Stable electroactive iron tetra(o-aminophenyl)porphyrin (FeTAPP) films are prepared by electropolymerization from aqueous solution by cycling the electrode potential between −0.4 and 1.0 V vs Ag/AgCl at 0.1 V s⁻¹. The cyclic voltammetric response indicates that polymerization takes place after the oxidation of amino groups, and the films could be produced on glassy carbon (GC) and gold electrodes. The film growth of poly(FeTAPP) was monitored by using cyclic voltammetry and electrochemical quartz crystal microbalance. The cyclic voltammetric features of Fe(III)/Fe(II) redox couple in the film resembles that of surface confined redox species. The electrochemical response of the modified electrode was found to be dependent on the pH of the contacting solution with a negative shift of 57 mV/pH. The electrocatalytic behavior of poly(FeTAPP) film-modified electrode was investigated towards reduction of hydrogen peroxide, molecular oxygen, and chloroacetic acids (mono-, di-, and tri-). The reduction of hydrogen peroxide, molecular oxygen, and dichloroacetic acid occurred at less negative potential on poly(FeTAPP) film compared to bare GC electrode. Particularly, the overpotential of hydrogen peroxide was reduced substantially. The O₂ reduction proceeds through direct four-electron reduction mechanism.     

A glassy carbon electrode modified with antimony and poly(p-aminobenzene sulfonic acid) for sensing lead(II) by square wave anodic stripping voltammetry

We have developed a sensor for the square wave anodic stripping voltammetric determination of Pb(II). A glassy carbon electrode was modified with a thin film of an antimony/poly(p-aminobenzene sulfonic acid) composite in air-saturated aqueous solution of pH 2.0. Compared to a conventional antimony film electrode, the new one yields a larger stripping signal for Pb(II). The conditions of polymerization, the concentration of Sb(III), the pH value of the sample solution, the deposition potential and time, frequency, potential amplitude, and step increment potential were optimized. Under the optimum conditions, a linear response was observed for Pb(II) in the range of 0.5 to 150.0 μg?L^?1. The detection limit for Pb(II) is 0.1 μg?L^?1.

Electrochemical Determination of Cu(II) Ions in Chloride‐Rich Environment Using Polyviologen‐Modified Glassy Carbon Electrodes

Polyviologen was formed on glassy carbon electrodes using potentiostatic electropolymerization in pH 4.2 Britton‐Robinson buffer solution. The polyviologen‐modified glassy carbon electrode (PVGCE) was employed to determine Cu(II) in chloride‐rich solutions in order to demonstrate the electroanalytical application of polyviologen. The PVGCE was found capable of enhancing the detection limit of Cu(II) in chloride‐rich environment because of the anion‐exchange feature of the polymer film. Cathodic stripping square‐wave voltammetry (CSSWV) was employed to determine Cu(II). The dependence of the cathodic stripping current on the concentration of Cu(II) was linear from 0.06 ppm to 9.53 ppm with a regression coefficient of 0.999. The detection limit is 0.02 ppm (σ = 3). Regeneration of the PVGCE can be achieved by simply immersing the electrode in a stirred 0.5 M NaCl solution.     

Electrocatalytic properties of guanine, adenine, guanosine-5'-monophosphate, and ssDNA by Fe(II) bis(2,2':6',2'-terpyridine), Fe(II) tris(1,10-phenanthroline), and poly-Fe(II) tris(5-amino-1,10-phenanthroline)

The electrocatalytic oxidations of guanine, adenine, guanosine-5'-monophosphate(GMP) and ssDNA were performed in the presence of Fe(II) bis(2,2':6',2'-terpyridine) and Fe(II) tris(1,10-phenanthroline) complexes as homogeneous catalysts by cyclic voltammetric methods. The Fe(II/III) redox couple of these compounds is responsible for their catalytic properties. The electrocatalytic oxidation current of above substrates were developed from the anodic peak currents of Fe(II) bis(2,2':6',2'-terpyridine) and Fe(II) tris(1,10-phenanthroline) complexes at about +0.93 V and 0.97 V, respectively. The electrocatalytic oxidative properties of guanine by Fe(II) bis(2,2':6',2'-terpyridine) complex was measured by amperometry method using the rotating disk electrodes. Electropolymerization of Fe(II) tris(5-amino-1,10-phenanthroline) complex produced thin polymer films on gold and glassy carbon electrodes. The electrochemical quartz crystal microbalance (EQCM) and cyclic voltammetry were used to study the in situ growth of the polymer. The poly(FeII(5-NH(2)-1,10-phen)(3)) exhibited a good electrocatalytic oxidation towards guanine and also for the mixture of guanine and adenine too.     

Chemical species produced in the reaction between ethanedial (glyoxal) and 5-amino-1,10-phenanthroline and their iron(II) complexes: electrochemical studies and analytical applications

The cyclic voltammetric behavior of carbon paste electrodes modified by direct admixing with the products of the reactions between ethanedial (glyoxal) and 5-amino-1,10-phenanthroline at 100°C and that of their iron(II) complexes is reported. The ligand(s) produced in absence of iron(II) are able to complex iron(II) and copper(II) ions reversibly, but other ions such as nickel(II), cobalt(II), cadmium(II) and manganese(II), if complexed, show no electrochemical activity. Admixing with the products of the reaction in the presence of excess of iron(II) ion, because of high insolubility and fast electron exchange, produces surfaces useful for amperometric detection in continuous-flow systems. The voltammetric and amperometric behavior in the presence of HSO^?₃ ions is reported in order to illustrate this application.     

Synthesis and chemistry of metallo poly(phenylene diacetylenes)

We describe the synthesis and characterization of metallopolymers comprising poly(phenylene diacetylenes) containing platinum and cobalt species coordinated to the triple bonds of the diacetylene moities. Thermal treatment of these polymers as thin films results in their conversion to hetero glassy carbon (HGC). The coordinated metals are retained within the matrices of the glassy carbons as small metallic clusters (∼10-30 Å for Pt and 50-1000 Å for cobalt). The platinum doped glassy carbon shows remarkable activity for the reduction of both H⁺ and O₂, a result that has important implications for the development of fuel cell electrodes. At both pH 0 and 7, the platinum Pt-HGC reduced the overpotential for O₂ reduction by ∼800 mV, and resulted in a voltammetric response similar to that of pure platinum.     

Preparation of polymer-coated electrodes containing metal ions complexing sites by electropolymerization of 2-mercaptobenzimidazole and 2-mercaptobenzothiazole on glassy carbon

The possibility of producing polymer-coated electrodes containing complexing agents capable of collecting metal ions was investigated. The organic ligands 2-mercaptobenzimidazole and 2-mercaptobenzothiazole were used as monomers for electropolymerization on glassy carbon electrodes. The electroanalytical applicability of the modified electrodes was evaluated for Hg²⁺ ions, by applying a chemical preconcentration step with subsequent measurement by differential pulse voltammetry. The influence of some electropolymerization parameters, such as scan rate, monomer concentration and the number of cyclic scans, on the voltammetric response of mercury(II) was studied. A 5 min preconcentration period allowed the detection of 0.08 mg/L (4.0 × 10⁻⁷ mol L⁻¹) mercury.     

"Two-point" assembling of Zn(II) and Co(II) metalloporphyrins derivatized with a crown ether substituent in Langmuir and Langmuir-Blodgett films

The effect of "two-point" interactions of Zn(II) and Co(II) metalloporphyrins, bearing 15-crown-5 ether peripheral substituents, on their assembling in Langmuir and Langmuir-Blodgett (LB) films was investigated. That is, simultaneously, the central metal ion of the porphyrin was axially ligated by a nitrogen-containing ligand in the emerged part of the Langmuir film on one hand, and a suitably selected cation pertaining in the subphase solution was supramolecularly complexed by the crown ether moiety in the submerged part of the film on the other. The compression and polarity properties of the Langmuir films of the derivatized free-base 5,10,15-triphenyl-20-(benzo-15-crown-5)porphyrin, H2(TPMCP), and the corresponding cobalt(II) and zinc(II) metalloporphyrins, denoted as Co(TPMCP) and Zn(TPCMP), respectively, as well as inclusion complexes of the metalloporphyrins with selected cations were investigated. For the axial ligation of Zn(II) and Co(II), pyrazine (pyz) and 4,4'-bipyridnine (bpy) aromatic as well as piperazine (ppz) and 1,4-diazabicyclo[2.2.2]octane (DABCO) cyclic heteroaliphatic ligands were selected. The films were formed on the water subphase solution in the absence and presence of LiCl, NaCl, or NH4Cl. The Langmuir films were built of monolayer J-type aggregates of tilted porphyrin macrocycles. The porphyrins formed rather labile complexes with the cations in the subphase. Nevertheless, the XPS analysis revealed that these cations were LB transferred together with the porphyrins onto solid substrates. In the Co(TPMCP) Langmuir films formed on the water subphases, Co(II) was complexed by aromatic but not cyclic heteroaliphatic ligands, while, in these films formed on the NaCl subphase solutions, the metalloporphyrin was also complexed by DABCO. In Langmuir films spread on alkaline subphase solutions, both aromatic and heteroaliphatic ligands formed complexes with Co(TPMCP) of different stoichiometries. The X-ray reflectivity and GIXD measurements performed on selected LB films revealed some structure-building effects of the axial ligation.     

Influence of Pb(II) concentration and pH of acetate buffer on the potential window of a lead film electrode: an Atomic Force Microscopy Study

Atomic force microscopy (AFM) studies on observations of lead films deposited from the solutions containing an acetate buffer and different concentration of Pb(II) are presented. AFM images show considerable variability in morphology of the deposited lead layer depending on experimental conditions. To investigate effects of the Pb(II) concentration and pH of the supporting electrolyte on the accessible potential window of the lead film electrode (PbFE), voltammetric techniques were used. It was found that the useful potential window of PbFE is affected by the pH and Pb(II) concentration. Additionally, it was found that the distribution and large size of Pb particles on the electrode surface shown by AFM corresponded well to the mass of Pb expected on the glassy carbon support with respect to the voltammetric data. Results reveal that PbFE is an attractive nonmercury metallic electrode suitable for electrochemical detection of metal ions and a lot of organic compounds in a wide potential window. The accessible potential window of the PbFE in an acetate buffer (pH = 5.0) was compared to those obtained at the bismuth film electrode and antimony film electrode.     

Synthesis of poly(3-methylthiophene) in the presence of 1-(2-Pyrrolyl)-2-(2-thienyl) ethylene by electropolymerization

In this study, the electropolymerization of 3-methylthiophene (3-MT) was preformed in the presence of a catalytic amount 1- (2-pyrrolyl)-2-(2-thienyl) ethylene (PTE) by cyclic voltammetry in acetonitrile as a solvent and lithium perchlorate as the electrolyte on a glassy carbon (GC) electrode. First, PTE was synthesized via the Wittig reaction. The addition of a catalytic amount of PTE during the electropolymerization of 3-MT changes the cyclic voltammograms such that the analysis of cyclic voltammograms of poly(3-MT) shows a considerable increase in the electroactivity and redoxability. Furthermore, the presence of PTE during the electropolymerization of 3-MT increases the polymerization rate. The CV measurement of the electron transfer ferro/ferricyanide redox system using different modified GC electrodes shows that the rate of charge transfer for poly(3-MT) in the presence of PTE is greater than that of poly(3-MT) alone. The conductivity of the obtained polymers was determined by electrochemical impedance spectroscopy (EIS) in 3.5% NaCl (w/v) solutions. With the application of Zview(II) software to the EIS, we estimate the parameters of the proposed equivalent circuit, based on a physical model for the electrochemical behavior of coatings on the GC electrode, to be 15739 ohm cm² for the charge transfer resistance (R_ct) for poly(3-MT) alone and 9700 ohm cm² for poly(3-MT) in the presence of PTE. Thus, the film of poly(3-MT) formed in the presence of PTE is more conductive.     

Voltammetric and impedance studies of inosine-5'-monophosphate and hypoxanthine

The oxidation mechanism and adsorption of inosine 5'-monophosphate and hypoxanthine were investigated in solutions of different pH using voltammetric and impedance methods at glassy carbon electrodes. For both compounds, the pH dependence from differential pulse voltammetry showed that the same number of electrons and protons are involved in the rate-determining step of the electrochemical reaction. In the case of hypoxanthine, it was also possible to study the effect of different concentrations. At high concentrations of hypoxanthine, two oxidation peaks were observed, the first due to hypoxanthine oxidation with formation of oligomers and the second due to hypoxanthine oligomer oxidation, both compounds adsorbing strongly. Impedance measurements corroborated the voltammetric results and enabled the study of the adsorption of hypoxanthine on glassy carbon.     

Copper(II), nickel(II), cobalt(II) and zinc(II) complexes of 2-[2-(6-methylbenzothiazolyl)azo]-5-dimethylaminobenzoic acid: synthesis,spectral, thermal and molecular modelling studies

Complexes of copper(II), nickel(II), cobalt(II), and zinc(II) with 2-[2-(6-methylbenzothiazolyl)azo]-5-dimethylaminobenzoic acid have been prepared and characterized by elemental analysis, vibrational spectra, magnetic susceptibility measurements, conductance measurements and e.p.r. spectra. Stability constants have been evaluated potentiometrically. Electronic spectra, magnetic susceptibility measurements and molecular modeling studies support a distorted square planar geometry around the metal ions. Vibrational spectra indicate the coordination of the azo group, nitrogen of benzothiazole, the carboxylate anion and the acetate ion on complexation with the metal ion. All complexes are found to be monomers. The stability of the complexes follow the order: copper(II) > nickel(II) > cobalt(II) > zinc(II).     

Electrochemical investigations on pentagonal bipyramidal complexes of manganese(II), iron(II), and cobalt(II) with a heptadentate Schiff-base ligand in non-aqueous solvents

Summary The voltammetric properties of the complexes formed by manganese(II), iron(II), and cobalt(II) ions with a heptadentate Schiff-base ligand have been investigated by cyclic voltammetry and controlled-potential coulometry at mercury and platinum electrodes in acetonitrile and dimethyl sulfoxide solvents.All the species undergo a single one-electron oxidation process leading to the corresponding stable metal(III) complexes which have been isolated and characterized.The cathodic behaviour of manganese(II) and iron(II) derivatives is very similar, in that the less cathodic process occurs at nearly equal potential values, indicating that the ligand moiety is reduced rather than the metal centre. The one-electron reduction process of the cobalt(II) complex leads to the corresponding cobalt(I) derivative, stable in the electrolysis solution.     

Potentiometric pH sensors based on chemically modified electrodes with electropolymerized metal-tetraaminophthalocyanine

Potentiometric pH sensors based on polymer film were prepared by electropolymerization of the monomer nickel(II)-4,4',4',4'-tetraaminophthalocyanine (NiTAPc) or copper(II)-4,4',4',4'-tetraaminophthalocyanine (CuTAPc) on glassy carbon (GC) electrodes. The polymer of metal tetraaminophthalocyanine (p-MTAPc) film coated electrodes show a slope of 55 +/- 1 mV/pH (at 20 degrees C) and nearly Nernstain potentiometric response to pH over the range of pH 1-13. The electrodes possess good potential reproducibility and high selectivity, and are useful sensing devices in pH determination and end-point indication of acid-base potentiometric titration.     

Electrocatalytic reduction of NAD+ at glassy carbon electrode modified with single-walled carbon nanotubes and Ru(III) complexes

A simple procedure was developed to prepare a glassy carbon electrode modified with carbon nanotubes and Ruthenium (III) complexes. First, 25 μl of dimethyl sulfoxide–carbon nanotubes solutions (0.4 mg/ml) was cast on the surface of the glassy carbon electrode and dried in air to form a carbon nanotube film at the electrode surface. Then, the glassy carbon/carbon nanotube-modified electrode was immersed into a Ruthenium (III) complex solution (direct deposition) for a short period of time (10–20 s for multiwalled carbon nanotubes and 20–40 s for single-walled carbon nanotubes). The cyclic voltammograms of the modified electrode in aqueous solution shows a pair of well-defined, stable, and nearly reversible redox couple, Ru(III)/Ru(II), with surface-confined characteristics. The attractive mechanical and electrical characteristics of carbon nanostructures and unique properties and reactivity of Ru complexes are combined. The transfer coefficient (α), heterogeneous electron transfer rate constants (k _s), and surface concentrations (Γ) for the glassy carbon/single-walled carbon nanotubes/Ru(III) complex-, glassy carbon/multiwalled carbon nanotubes/Ru(III) complex-, and glassy carbon/Ru(III) complex-modified electrodes were calculated using the cyclic voltammetry technique. The modified electrodes showed excellent catalytic activity, fast response time, and high sensitivity toward the reduction of nicotinamide adenine dinucleotide in phosphate buffer solutions at a pH range of 4–8. The catalytic cathodic current depends on the nicotinamide adenine dinucleotide concentration. In the presence of alcohol dehydrogenase, the modified electrode exhibited a response to addition of acetaldehyde. Therefore, the main product of nicotinamide adenine dinucleotide electroreduction at the Ru(III) complex/carbon nanotube-modified electrode was the enzymatically active NADH. The purposed sensor can be used for acetaldehyde determination.     

Mechanism of electroreduction of cobalt(II) in thiocyanate solutions at mercury electrodes

The process of electroreduction of cobalt(II) in thiocyanate solutions at mercury electrodes has been investigated by cyclic voltammetric, chronoamperometric and polarographic methods. The influences of pH, the concentrations of Co(II) and SCN^?, and the reduction products of SCN^?, CN^? and S^2? on the reduction waves are described. The polarographic pre-wave is an autocatalytic in nature. A mechanism involving an initial reduction of Co(II)—SCN^? at a mercury electrode followed by the chemical reduction of thiocyanate ion with the electroreduced metallic cobalt, and taking into account cyanide, sulfide, and hydroxide ions, the latter being produced by the hydrolysis of cyanide ion, is presented. Cobalt sulfide adsorbed at the electrode surface stimulates further reduction of Co(II)—CN^? and —SCN^? complexes, and depresses the interfering influence of Co(OH)₂, which is reductively desorbed from the electrode surface with giving rise to an additional peak near ?1.08 V vs. SCE.     

磷钨钴和磷钨镍杂多酸化学修饰电极的研究

杂多酸由于组成和结构上的特点,在电化学和电分析化学领域有着广泛应用[1,2]。迄今为止,有关磷钨钴和磷钨镍三元杂多酸化学修饰电极还未见报道。本文按文献方法[3]合成了磷钨钴(Ｈ3ＰＷ11ＣｏＯ40·ｘＨ2Ｏ)和磷钨镍(Ｈ3ＰＷ11ＮｉＯ40·ｘＨ2Ｏ)杂多酸,分别以Ｈ3ＰＷ12Ｏ40·ｘＨ2Ｏ、Ｈ3ＰＷ11ＣｏＯ40·ｘＨ2Ｏ和Ｈ3ＰＷ11ＮｉＯ40·ｘＨ2Ｏ杂多酸(以下简写为Ｈ3ＰＷ11ＭＯ40·ｘＨ2Ｏ,其中Ｍ代表Ｗ,Ｃｏ和Ｎｉ)为修饰剂,采用电化学方法在导电基体玻碳(ＧＣ)电极上制备了Ｈ3ＰＷ11ＭＯ40/ＧＣ膜修饰电极,制备过程简便、快速。对膜电极的…     

EPR, IR and electronic spectral studies on Mn(II), Co(II), Ni(II) and Cu(II) complexes with a new 22-membered azamacrocyclic [N4] ligand

The complexes of transition metal ions with an azamacrocyclic tetradentate nitrogen donor [N4] ligand viz. 2,6,12,16,21,22-hexaaza;3,5,13,15-tetramethyltricyclo[15.3.1.1(7-11)] docosa;1(21),2,5,7,9,11(22),12,15,17,19-decaene (L) have been synthesized. All the complexes were found to have general composition M(L)X2 [where M = manganese(II), cobalt(II), nickel(II) and copper(II) and X = Cl- & NO3-]. All the complexes are characterized by the elemental analysis, molar conductance measurements, magnetic susceptibility measurements, mass, 1H NMR, IR, electronic, EPR spectral and cyclic voltammetric studies. An octahedral geometry was assigned for Mn(II), Co(II) and Ni(II) complexes and tetragonal for Cu(II) complexes. The biological actions of the ligand and complexes have been screened in vitro against many bacteria and pathogenic fungi to study their comparative capacity to inhibit the growth.     

Synthesis and characterization of cobalt(II) and zinc(II) complexes of poly(3-nitrobenzyli dene-1-naphthylamine-co-succinic anhydride)

The cobalt(II) and zinc(II) complexes of poly(3-nitrobenzylidene-1-naphthylamine-co-succinic anhydride) were synthesized by the reaction of THF solution of the alternating copolymer with aqueous solution of cobalt(II) and zinc(II) acetates. The metal complexes were characterized by elemental analysis, magnetic measurements, IR, UV–Vis. and ¹H NMR spectral studies. The elemental analysis of the metal polymer complexes suggests that the metal to ligand ratio is 1:2. Conductance measurements indicate the non electrolytic nature of both the complexes. Electronic spectrum and magnetic moment studies are taken into account for the geometry of cobalt complex. Thermal analysis data of the two metal–polymer complexes were reported. XRD data revealed the nanocrystalline nature of both the complexes. The SEM studies give the surface morphology of the complexes.