复合高分子膜修饰电极直接测定大脑内源性神经递质

采用阳离子交换剂Ｎａｆｉｏｎ和醋酸纤维素复合修饰的碳纤维电极具有电荷选择性和尺雨选择性，对复杂样品具有独特的选择和抗干扰性，在动物活性伏安分析中，该复合修饰电极成功地抑制了神经递质代谢产物，抗坏血酸和尿酸等电化学活性物质在电极表面的反应，直接检测了脑内神经质多巴胺的氧化电流，该电极采用静电浸浦法多次涂布，使电极的复合膜牢固，并具有很好的分析性能，同时，对复合修饰电极的作用机理进行了探讨。     

基于Nafion/碳纳米粒子修饰的葡萄糖传感器

采用滴涂法制备了Nafion/碳纳米粒子复合物修饰玻碳电极,该电极对H2O2具有良好的电催化氧化性能。还利用滴涂法制备了Nafion/碳纳米粒子复合物包裹的葡萄糖酶电化学生物传感器,该生物传感器对葡萄糖有着良好的电催化作用。应用该传感器对葡萄糖进行了检测,检测线性范围为2.0×10-6～6.0×10-3mol/L,检出限为1.6×10-6mol/L(S/N=3),实验结果表明该传感器具有良好的稳定性、重现性和抗干扰能力。对小鼠血清样品中的葡萄糖进行检测,结果令人满意。     

A thin-layer electrochemical detector coated with nafion film for liquid chromatography

The selectivity and analytical application of a thin-layer electrochemical detector comprised of glassy carbon electrode coated with Nafion film were investigated. As a result of the ion-exchange characteristics of the Nafion polymer, the selectivity and stability were improved greatly. The coated electrode has a good response only for cations with the same sensitivity as an uncoated (bare) electrode, but not for anions, and the response for neutral molecules is decreased three-fold. The diffusion of electroactive compounds in Nafion film is discussed based on the results of flow injection experiments. The peak current at the coated electrode was independent of the flow-rate of the mobile phase. Electrode poisoning due to protein adsorption was minimized. The use of 30% methanol or 10% acetonitrile in the mobile phase did not affect the performance of the coated electrode. Various analytes having three kinds of charge state, i.e., anionic, cationic and neutral, were tested. Liquid chromatography with electrochemical detection of ascorbic acid, norepinephrine, epinephrine, dopamine and uric acid was demonstrated.     

蒙脱土修饰碳纤维电极的制备及其应用于活体测定脑神经递质

制备了蒙脱土修饰碳纤维电极,研究了其对神经递质多巴胺(DA)及5羟色胺(5HT)的富集作用,以及对负电性的代谢产物3,4二羟基苯乙酸(DOPAC)、5羟吲哚乙酸(5HIAA)及脑内大量存在的抗坏血酸(AA)排斥性能.该电极具有很高的灵敏度、分辨率和抗干扰性,对DA的检测下限达16×10^-8mol/L,优于传统的Nafion修饰电极,对5HT的检测下限为1×10^-7mol/L.在动物活体分析中,使用该电极成功地检测了大鼠双侧颈总动脉结扎再灌损伤时,脑纹状体中神经递质DA浓度的变化.     

Amperometric phenol biosensor based on sol-gel silicate/Nafion composite film

An amperometric biosensor based on tyrosinase immobilized in silicate/Nafion composite film has been developed for the determination of phenolic compounds. The Nafion polymer in the composite was used not only to overcome the brittleness of the pure sol-gel-derived silicate film but also to increase the long-term stability of the biosensor. Tyrosinase was immobilized by a thin film of silicate/Nafion composite on a glassy carbon electrode. Phenolic compounds were determined by the direct reduction of biocatalytically-liberated quinone species at −200 mV versus Ag/AgCl (3 M NaCl). The process parameters for the fabrication of the enzyme electrode and various experimental variables such as pH and operating potential were explored for optimum analytical performance of the enzyme electrode. The biosensor can reach 95% of steady-state current in about 15 s. The sensitivities of the biosensor for catechol and phenol were 200 and 46 mA/M, respectively. A detection limit of 0.35 mM catechol was obtained with a signal-to-noise ratio of 3. The enzyme electrode retained 74% of its initial activity after 2 weeks of storage in 50 mM phosphate buffer at pH 7.     

Electrocatalytic oxidation of nitric oxide at nano-TiO2/Nafion composite film modified glassy carbon electrode

A novel nanocrystalline TiO₂ (nano-TiO₂) and Nafion composite film modified glassy carbon electrode has been developed for the determination of nitric oxide (NO) radical in an aqueous solution. This modified electrode can be employed as a NO sensor with a low detection limit, fast response, high sensitivity and selectivity. Two apparent anodic peaks were observed at 0.67 and 0.95 V at the nano-TiO₂ modified glassy carbon electrode by differential pulse voltammetry (DPV). After further modification with a thin film of Nafion, which was capable of preventing some anionic interference such as nitrite and ascorbic acid, only one peak appeared and the peak current enhanced greatly. The chronocoulometric experimental results showed NO was oxidized by one-electron transfer reaction at the composite film modified electrode. The amperometric responses increased linearly with the concentrations of NO ranging from 3.6×10⁻⁷ mol/L to 5.4×10⁻⁵ mol/L. The detection limit was estimated to be 5.4×10⁻⁸ mol/L. In this sensor system, the modification film provides complete selectivity for NO over nitrite anions (NO₂⁻).     

The Application of Nafion Metal Catalyst Free Carbon Nanotube Modified Gold Electrode: Voltammetric Zinc Detection in Serum

Metal catalyst free carbon nanotube (MCFCNT) whiskers were first used as an electrode modification material on a gold electrode surface for zinc voltammetric measurements. A composite film of Nafion and MCFCNT whiskers was applied to a gold electrode surface to form a mechanically stable sensor. The sensor was then used for zinc detection in both acetate buffer solution and extracted bovine serum solution. A limit of detection of 53 nM was achieved for a 120 s deposition time. The zinc in bovine serum was extracted via a double extraction procedure using dithizone in chloroform as a zinc chelating ligand. The modified electrode was found to be both reliable and sensitive for zinc measurements in both matrices.     

Influence of Nafion Coatings and Surfactant on the Stripping Voltammetry of Heavy Metals at Bismuth‐Film Modified Carbon Film Electrodes

Nafion polymer coated bismuth‐film‐modified carbon film electrodes have been investigated for reducing the influence of contaminants such as surfactants in the anodic stripping voltammetry of trace metal ions. The influence of the coating on electrode response has been tested with both ex situ and in situ bismuth film deposition, with and without the polymer coating. The electrode assemblies and interfacial characteristics in the presence of the non‐ionic surfactant Triton‐X‐100 have been probed with electrochemical impedance spectroscopy. The Nafion coating successfully decreases the adsorption of Triton on the bismuth film surface, and demonstrates that this strategy allows measurement of these trace metals in environmental samples containing surfactants.     

Nitric oxide determination by amperometric carbon fiber microelectrode

Nitric oxide (NO) amperometric microsensor was prepared by the modification of bare carbon fiber electrode by Nafion and cellulose acetate (CA). Detection limit, response time, reproducibility and influence of some possible interferences (nitrite, nitrate, arginine) were tested and evaluated. This sensor was used for in vitro determination of NO release from fresh porcine aorta induced by calcium ionophore A23187 (CI).     

Real Time In Vivo Measurement of Ascorbate in the Brain Using Carbon Nanotube‐Modified Microelectrodes

A carbon fiber microelectrode modified with a composite film of carbon nanotubes and Nafion was developed for in vivo ascorbate (AA) measurements in brain tissue. The modified‐microelectrodes exhibit an electrocatalytic activity for AA oxidation by shifting the peak potential negatively to ?0.040 V, showing a sensitivity of 37 pA/µM, a detection limit of 2.5 µM, a response time of 0.3 s and don’t respond to several electroactive compounds found in the brain extracellular space. In the rat hippocampus, the basal concentration of AA was 290 µM, and glutamate‐evoked changes in AA were biphasic comprising fast and slow components.     

Nafion膜修饰电极的制备及其通透性研究

制备Nafion 膜修饰玻碳电极,并研究其对多种电活性物质的通透性.以一系列不同浓度(质量分数分别为O.5%、2%、3%、5%)的Nafion 溶液,采用滴涂或蘸涂方式制成Nafion 膜修饰玻碳电极.利用循环伏安法,通过测定铁氰化钾、抗坏血酸、多巴胺等电活性物质在玻碳电极和不同厚度Nafion 膜修饰电极表面的响应情...     

Electrocatalytic oxidation and voltammetric determination of dopamine on a composite film electrode with an iridium deposit

Electrochemical oxidation of dopamine on a composite glassy carbon electrode with an electrodeposited iridium layer coated with a Nafion film was studied. A procedure for voltammetric determination of dopamine on the composite film electrode was developed.     

Nafion/tetraruthenated porphyrin glassy carbon-modified electrode: characterization and voltammetric studies of sulfite oxidation in water–ethanol solutions

In this work, the modification of a glassy carbon electrode with tetraruthenated porphyrins electrostatically assembled onto a Nafion film, previously adsorbed on the electrode surface, is reported. This modified electrode was characterized by scanning electron microscopy–energy-dispersive X-ray, Raman spectroscopy, UV-Vis spectroelectrochemistry, and cyclic voltammetry. The Nafion film onto the glassy carbon electrode shows a smooth disposition; when the tetraruthenated porphyrin is incorporated on the Nafion film, the complex is adsorbed in a homogeneous way. The modified electrode catalyzes HSO₃⁻ oxidation in water–ethanol solutions and shows an enhanced stability compared with the electrode modified with the dip coating method. Rotating disk electrode experiments showed a kinetic limitation to the electron transfer controlled by charge propagation in the film. I/E curves show a Tafel slope of 120 mV/decade corresponding to a first electron-transfer reaction, depending on the potential, as the determining step. Spectroelectrochemical experiments demonstrated that Ru(II) is the active site for the electrocatalysis.     

Amperometric detection of cationic neurotransmitters at nafion-coated glassy carbon electrodes in flow streams

Substantial improvements in amperometric monitoring of flowing streams are obtained by using Nafion-coated working electrodes. The charged coating tends to exclude anionic and neutral interferences, thus adding a new dimension of selectivity to electrochemical detection for flow-injection and liquid-chromatographic systems. A highly selective response is observed for cationic neurotransmitters in the presence of otherwise interfering substances (e.g., ascorbic acid, uric acid, bilirubin or chlorpromazine). The permselectivity and transport characteristics are evaluated with respect to solution pH, solvent, flow rate, film thickness, and other variables. The reduced flow-rate dependence results in low noise levels and detection limits of 0.04 and 0.10 ng of norepinephrine and epinephrine, respectively. A bilayer electrode coating, with a cellulose acetate film over the Nafion layer, offers a bifunctional (selectivity, protection) capability. Applicability to urine samples is demonstrated.     

多臂碳纳米管/Nafion复合材料修饰玻碳电极测定痕量的铅离子

A composite material of nitric acid oxidized multiwalled carbon nanotube （MWNT） and Nation was prepared. Such composite was modified on a glassy carbon electrode to determine trace of lead by differential pulsed voltammetry. In pH=6.47 NaNO3 solution, Pb^2＋ ions were accumulated on the modified electrode at -0.4 V. Compared with a bare and a Nation film coated electrode, the composite coated GC electrode can reduce the accumulating potential and eliminate the toxic character of mercury. The calibration plots were linear at low concentration of 5.0× 10^-9-2.0× 10^-8 mol/L and high concentration of 2.5× 10^-8-5.0× 10^-6 mol/L. The performances characteristics indicate that the electrode can be used to determine trace Pb^2＋ ions.     

Solid-state electrochemiluminescence sensor based on the Nafion/poly(sodium 4-styrene sulfonate) composite film

An effective electrochemiluminescence (ECL) sensor based on Nafion/poly(sodium 4-styrene sulfonate) (PSS) composite film-modified ITO electrode was developed. The Nafion/PSS/Ru composite film was characterized by atomic force microscopy, UV-vis absorbance spectroscopy and electrochemical experiments. The Nafion/PSS composite film could effectively immobilize tris(2,2′-bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺) via ion-exchange and electrostatic interaction. The ECL behavior of Ru(bpy)₃²⁺ immobilized in Nafion/PSS composite film was investigated using tripropylamine (TPA) as an analyte. The detection limit (S/N = 3) for TPA at the Nafion/PSS/Ru composite-modified electrode was estimated to be 3.0 nM, which is 3 orders of magnitude lower than that obtained at the Nafion/Ru modified electrode. The Nafion/PSS/Ru composite film-modified indium tin oxide (ITO) electrode also exhibited good ECL stability. In addition, this kind of immobilization approach was simple, effective, and timesaving.     

Stacked graphene nanofibers doped polypyrrole nanocomposites for electrochemical sensing

This publication shows a single-step electropolymerization which has been carried out by the incorporation of an anionic stacked graphene nanofiber (SGNF) dopant into a polypyrrole (PPy) film, at a disposable screen-printed electrode. The incorporation of the SGNFs into the polymer does not affect their electrochemical properties, shown through cyclic voltammetry by the earlier oxidation of guanine, when compared with that at the graphite doped PPy electrode. The SGNF/PPy composite shows a high selectivity when used in the oxidation of guanine and hydrogen peroxide, both of which are important biomarkers used for biosensing. Disposable screen-printed electrodes provide an inexpensive, sensitive and portable substitute to glassy carbon electrodes, while giving a reproducible surface; qualities essential for effective bionsensing. The production of this single-step disposable SGNF/PPy composite electrode allows for further applications in the detection of biomedically important compounds and DNA sensing.     

Direct electrochemistry and electrocatalysis of horseradish peroxidase immobilized in Nafion-RTIL composite film

The composite film based on Nafion and hydrophobic room-temperature ionic liquid (RTIL) 1-butyl-3-methyl-imidazolium hexafluorophosphate ([bmim] PF₆) was explored. Here, Nafion was used as a binder to form Nafion-ionic liquids composite film and help [bmim] PF₆ effectively adhered on glassy carbon (GC) electrode. X-ray photoelectron spectroscopy (XPS), cyclic voltammtery (CV) and electrochemical impedance spectroscopy (EIS) were used to characterize this composite film, showing that the composite film can effectively adhere on the GC electrode surface through Nafion interacting with [bmim] PF₆ and GC electrode. Meanwhile, doping [bmim] PF₆ in Nafion can also effectively reduce the electron transfer resistance of Nafion. The composite film can be readily used as an immobilization matrix to entrap horseradish peroxidase (HRP). A pair of well-defined redox peaks of HRP was obtained at the HRP/Nafion-[bmim] PF₆ composite film-modified GC electrode through direct electron transfer between the protein and the underlying electrode. HRP can still retain its biological activity and enhance electrochemical reduction towards O₂ and H₂O₂. It is expected that this composite film may find more potential applications in biosensors and biocatalysis.     

A glucose biosensor using methyl viologen redox mediator on carbon film electrodes

A new methyl viologen-mediated amperometric enzyme electrode sensitive to glucose has been developed using carbon film electrode substrates. Carbon film electrodes from resistors fabricated by pyrolytic deposition of carbon were modified by immobilization of glucose oxidase through cross-linking with glutaraldehyde in the presence of bovine serum albumin. The mediator, methyl viologen, was directly immobilised with the enzyme together with Nafion cation-exchange polymer. The electrochemistry of the glucose oxidase/methyl viologen modified electrode was investigated by cyclic voltammetry and by electrochemical impedance spectroscopy. The biosensor response to glucose was evaluated amperometrically; the detection limit was 20 μM, the linear range extended to 1.2 mM and the reproducibility of around 3%. When stored in phosphate buffer at 4 °C and used every day, the sensor showed good stability over more several weeks.     

Direct Electrochemistry of Hemoglobin and its Electrocatalysis Based on a Carbon Nanotube Paste Electrode

A new hemoglobin (Hb) and carbon nanotube (CNT) modified carbon paste electrode was fabricated by simply mixing the Hb, CNT with carbon powder and liquid paraffin homogeneously. To prevent the leakage of Hb from the electrode surface, a Nafion film was further applied on the surface of the Hb‐CNT composite paste electrode. The modified electrode was characterized by scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS). Direct electrochemistry of hemoglobin in this paste electrode was easily achieved and a pair of well‐defined quasi‐reversible redox peaks of a heme Fe(III)/Fe(II) couple appeared with a formal potential (E^0′) of ?0.441 V (vs. SCE) in pH 7.0 phosphate buffer solution (PBS). The electrochemical behaviors of Hb in the composite electrode were carefully studied. The fabricated modified bioelectrode showed good electrocatalytic ability for reduction of H₂O₂ and trichloroacetic acid (TCA), which shows potential applications in third generation biosensors.