变厚度非均匀粘弹性复合圆柱体的旋转应力

在平面应变的假设下,给出了两个复合弹性圆柱体旋转时的解析解．外柱是由厚度按公式变化的正交各向异性材料所组成,它包裹着一个等厚度纤维增强粘弹性均匀各向同性的实心圆柱体．外圆柱体的厚度和弹性性质按半径方向的幂函数变化．应用边界和连续条件,确定复合圆柱体旋转时的径向位移和应力,应用等效模量和Illyushin逼近法,得到问题的粘弹性解．讨论了各向异性、厚度变化、本构参数以及时间参数,对径向位移和应力的影响．     

无限圆柱体旋转运动时的热应力

研究旋转对确定边界条件下无限圆柱体的影响.当热荷载沿径向作用时,给出了旋转圆柱体中热应力、位移和温度的分析过程.当无限弹性圆柱体部分弯曲界面有常温作用,而其余界面维持零温度时,讨论其热动应力的分布.圆柱体表面绝缘材料熔化时出现这种情况.得到了应力分量、位移分量和温度的解和数值结果.提出的半解析法所得到的结果,与早期采用方法所得到的结果比较,发现两者显示出很好的一致性.     

Elastic Analysis of Anisotropic Functionally Graded Rotating Disks With Non-Uniform Thicknesses北大核心CSCD

研究了任意梯度变化的变厚度各向异性转动圆盘的弹性问题.假设圆盘绕刚性轴匀速转动,其材料性能和厚度沿径向任意梯度变化.考虑圆盘在中心转轴处受位移约束,外侧自由,根据各向异性转动圆盘的平衡微分方程,得到关于径向应力的Fredholm积分方程,继而通过对Fredholm积分方程进行数值求解,得到结构的位移场和应力场.对具体梯度变化情况仅需代入相应梯度变化进行求解即可.数值算例部分,通过假设厚度、弹性模量等参数为特殊的幂函数形式,将由Fredholm积分方程求出的数值解与对应的精确解进行对比,以及针对常见的Voigt模型,将由该方法算得的数值解和ANSYS有限元计算结果进行对比,验证了该方法的准确性和精度.其次,针对Voigt模型,重点分析了厚度变化、材料性能梯度参数、各向异性度等对应力场和位移场的影响.提出了针对材料性能和厚度沿径向呈任意梯度变化的圆盘结构弹性分析方法,将为优化功能梯度圆盘的结构和材料参数、有效调整构件应力分布、提高结构安全性,提供强有力的工具;算例分析结果对功能梯度圆盘在复杂条件下的结构安全设计有重要的理论指导意义.     

任意厚度具有自由边叠层板的精确解析解

自由边问题一直是三维弹性力学中的难题,通常很难满足自由边上一个正应力和两个剪应力都等于0．基于三维弹性力学基本方程和状态空间方法,引入自由边界位移函数并考虑全部弹性常数,建立了正交异性具有自由边单层和叠层板的状态方程．对状态方程中的变量以级数形式展开,通过边界条件的满足精确求解任意厚度具有自由边叠层板的位移和应力,此解满足层间应力和位移的连续条件．算例计算表明,采用引入的位移函数形式,简化了计算过程并且采用较少的级数项可以获得收敛解．与有限元方法计算结果进行了对比,可以得到较高精度的数值结果．其解可以作为其它数值方法和半解析方法的参考解．     

非对称Ⅲ型裂纹表面受运动载荷的动态扩展问题

通过复变函数论的方法,对非对称Ⅲ型裂纹表面受运动载荷的动态扩展问题进行了研究．采用自相似函数的方法可以获得解析解的一般表达式．应用该法可以迅速地将所讨论的问题转化为Riemann-Hilbert问题,并求得了非对称扩展裂纹表面分别受到常数运动载荷、阶跃运动载荷作用下的应力、位移和动态应力强度因子解析解．利用这些解并采用叠加原理,就可以求得任意复杂问题的解．     

由Gurtin变分原理求解任意形状板动力响应的半解析法

该半解析法以Gurtin变分原理为基础，在空间域作有限元离散，在时间域取级数．本文研究了任意形状板时域函数的取法，使得各种支承条件，任意形状板的动力响应问题均可由本计算模式得到具有相当精度和效率的解．     

非均匀变厚度梁的动力响应的一般解

在本文中提出一个新方法——阶梯折算法来研究在任意载荷下任意非均匀和任意变厚度伯努利-欧拉梁的动力响应问题.研究了自由振动和强迫振动.新方法需要将区间离散为一定数目的元素,每个元素可看作是均匀和等厚度的.因此均匀、等厚度梁的一般解可在每个元素上应用.然后用初参数表示的整个梁的一般解使之满足相邻二元素间的物理和几何连续条件,这样就可以得到解析形式的自由振动的频率方程和解析形式的强迫振动的最终解,它化为求解二元线性代数方程,与离散元素的数目无关.现在的方法可推广应用至任意非均匀及任意变厚度有粘滞性和其他种类的梁以及其他结构元件问题上去.     

横观各向同性饱和地基的三维动力响应

首先引入位移函数,将直角坐标系下横观各向同性饱和土Biot波动方程转化为2个解耦的六阶和二阶控制方程;然后基于双重Fourier变换,求解了Biot波动方程,得到以土骨架位移和孔隙水压力为基本未知量的积分形式的一般解,并用一般解给出了饱和土总应力分量的表达式．在此基础上系统研究了横观各向同性饱和半空间体的稳态动力响应问题,考虑表面排水和不排水两种情况,得到了半空间体在任意分布的表面谐振荷载作用下,表面位移的稳态动力响应,文末给出了算例．     

用Adomian分解法求解分数阻尼梁的解析解

利用Adomian分解法, 得到了由任意阶分数微分描述的具有阻尼特性的黏弹性连续梁的解析解．解中包含了任意的初始条件和零输入．为了更明确的分析, 假定初始条件是奇次的,输入受力是针对某种特定梁的特殊过程．分别考虑了两种简单情况下梁的响应:阶跃激励和脉冲激励．然后在系统的不同组参数条件下绘制了梁的位移图,并且讨论了梁在不同微分阶数下响应情况．     

功能梯度压电圆柱体的旋转分析及其应用——内压和热荷载作用下的力学传感器

对旋转的功能梯度压电(FGP)圆柱体,进行了精确的热弹性分析．圆柱体同时承受电、热和力学荷载的作用,这是一个旋转传感器或者调节器的简化模型．应用能量法得到系统的控制微分方程．为了正确地评估能量函数,引进了一个被称为“附加能量”的新项．在两种边界条件下:自由旋转的圆柱体和受内压作用的圆柱体,求解所得到的控制方程．研究角速度对各个物理量沿半径分布的影响．所研究的结构也可以认为是,在压力及热荷载作用下,测量圆柱体角速度的一个传感器．结果表明,电势与角速度成正比例关系．     

An analytical method for magnetothermoelastic analysis of functionally graded hollow cylinders

This paper considers magnetothermoelastic behavior of a functionally graded material (FGM) hollow cylinder, placed in a uniform magnetic field, subjected to thermal and mechanical loads. Exact solutions for stresses and perturbations of the magnetic field vector in FGM hollow cylinders is determined by using the infinitesimal theory of magnetothermoelasticity. Numerical results indicate that the inhomogeneous constants presented in the present study are useful parameters from a design point of view in that it can be tailored for specific applications to control the stress and perturbation of magnetic field vector distributions. This research is helpful for the optimum design annular cylindrical FGM sensors/actuators.     

圆柱壳的轴对称平面应变弹性动力学解

给出一种圆柱壳的轴对称平面应变弹性动力学问题的解析方法。首先通过引入一特定函数将非齐次边界条件化为齐次边界条件,然后利用分离变量法将位移减去特定函数的量展开为关于贝塞尔函数和时间函数乘积的级数,并由贝塞尔函数的正交性,导出时间函数的方程,容易求得此方程的解。将两者叠加可得弹性动力学问题的位移解。运用此方法,可以避免积分变换,并适宜于各种载荷。文中给出了各向同性和柱面各向同性圆柱壳内表面和实心圆柱外表面受冲击荷载作用以及内表面固定的柱面各向同性圆柱壳外表面受冲击荷载作用的数值结果。     

Thermal buckling and post-buckling analysis of geometrically imperfect FGM clamped tubes on nonlinear elastic foundation

Present research deals with the thermal buckling and post-buckling analysis of the geometrically imperfect functionally graded tubes on nonlinear elastic foundation. Imperfect FGM tube with immovable clamped–clamped end conditions is subjected to thermal environments. Tube under different types of thermal loads, such as heat conduction, linear temperature change, and uniform temperature rise is analyzed. Material properties of the FGM tube are assumed to be temperature dependent and are distributed through the radial direction. Displacement field satisfies the tangential traction free boundary conditions on the inner and outer surfaces of the FGM tube. The nonlinear governing equations of the FGM tube are obtained by means of the virtual displacement principle. The equilibrium equations are based on the nonlinear von Kármán assumption and higher order shear deformation circular tube theory. These coupled differential equations are solved using the two-step perturbation method. Approximate solutions are provided to estimate the thermal post-buckling response of the perfect/imperfect FGM tube as explicit functions of the various thermal loads. Numerical results are provided to explore the effects of different geometrical parameters of the FGM tube subjected to different types of thermal loads. The effects of power law index, springs stiffness of elastic foundation, and geometrical imperfection parameter of tube are also included.     

正交各向异性功能梯度层合板稳态热传导问题的精确解

对轴对称正交各向异性功能梯度层合圆板稳态热传导问题进行精确分析.假设材料热传导率沿板厚方向按指数函数形式梯度分布,从正交各向异性功能梯度圆板稳态热传导的基本方程出发,利用分离变量法,获得了在上、下表面作用任意热分布情况下的精确解.通过数值算例的分析,指出材料性质的梯度变化、板厚边界条件等分析了对温度场分布的影响.所获得的精确结果,可以作为评价其它近似方法的标准解答.     

Thermal buckling and post-buckling analysis of functionally graded beams based on a general higher-order shear deformation theory

In the present work, attention is focused on the prediction of thermal buckling and post-buckling behaviors of functionally graded materials (FGM) beams based on Euler–Bernoulli, Timoshenko and various higher-order shear deformation beam theories. Two ends of the beam are assumed to be clamped and in-plane boundary conditions are immovable. The beam is subjected to uniform temperature rise and temperature dependency of the constituents is also taken into account. The governing equations are developed relative to neutral plane and mid-plane of the beam. A two-step perturbation method is employed to determine the critical buckling loads and post-buckling equilibrium paths. New results of thermal buckling and post-buckling analysis of the beams are presented and discussed in details, the numerical analysis shows that, for the case of uniform temperature rise loading, the post-buckling equilibrium path for FGM beam with two clamped ends is also of the bifurcation type for any arbitrary value of the power law index and any various displacement fields.     

Exact solution of thermal stress problem of an inhomogeneous hygrothermal piezoelectric hollow cylinder

The closed-form exact solution for the hygrothermal response of inhomogeneous piezoelectric hollow cylinders is obtained. The interaction of electric potentials, electric displacement and elastic deformations is presented. The present cylinder is subjected to both a mechanical load and an electric potential. The material properties coefficients of the present cylinder are assumed to be changed in the radial direction by different distribution forms. The field quantities like displacement, stresses and electric potentials in the inhomogeneous piezoelectric cylinders are determined. The significant of influences of material inhomogeneity, initial temperature, final moisture, and the load and electric ratios in the field quantities are investigated. The concluding remarks and suitable discussions are made.     

Electro-thermo-mechanical behaviors of FGPM spheres using analytical method and ANSYS software

A hollow sphere made from functionally graded piezoelectric material (FGPM) such as PZT_4 has been considered. One-dimensional analytical method for electro-thermo-mechanical response of symmetrical spheres is used. For asymmetric three-dimensional analysis, ANSYS finite element software is employed in this study. Loading is combination of internal and external pressures, a distributed temperature field due to steady state heat conduction and a constant electric potential difference between its inner and outer surfaces for analytical solution. In three-dimensional solutions closed and open spheres with different boundary conditions subjected to an internal pressure and a uniform temperature field are studied. All mechanical, thermal and piezoelectric properties except the Poisson’s ratio are assumed to be power functions of radius. It has been found from analytical solution that the induced radial and circumferential stresses of an imposed electric potential is similar to the residual stresses locked in the homogeneous sphere during the autofrettage process of these vessels. It has been concluded from the three-dimensional analysis that the magnitudes of effective stresses at all node points are higher for the clamped-clamped boundary condition and are lower for the simply-simply supported condition.     

Effect of material in-homogeneity on electro-thermo-mechanical behaviors of functionally graded piezoelectric rotating shaft

In this article, a hollow circular shaft made from functionally graded piezoelectric material (FGPM) such as PZT_5 has been studied which is rotating about its axis at a constant angular velocity ω. This shaft subjected to internal and external pressure, a distributed temperature field due to steady state heat conduction with convective boundary condition, and a constant potential difference between its inner and outer surfaces or combination of these loadings. All mechanical, thermal and piezoelectric properties except for the Poisson’s ratio are assumed to be power functions of the radial position. The governing equation in polarized form is shown to reduce to a system of second-order ordinary differential equation for the radial displacement. Considering six different sets of boundary conditions, this differential equation is analytically solved. The electro-thermo-mechanical stress and the electric potential distributions in the FGPM hollow shaft are discussed in detail for the piezoceramic PZT_5. The presented results indicate that the material in-homogeneity has a significant influence on the electro-thermo-mechanical behaviors of the FGPM rotating shaft and should therefore be considered in its optimum design.     

Nonlinear transient thermal stress and elastic wave propagation analyses of thick temperature-dependent FGM cylinders,using a second-order point-collocation method

Nonlinear transient thermal stress and elastic wave propagation analyses are developed for hollow thick temperature-dependent FGM cylinders subjected to dynamic thermomechanical loads. Stress wave propagation, wave shape distortion, and speed variation under impulsive mechanical loads in thermal environments are also investigated. In contrast to researches accomplished so far, a second-order formulation rather than a first-order one is employed to improve the accuracy. The FDM method (as a point-collocation FEM method) is used. It is known that other FEM methods cannot show the actual trend jumps due to distributing the abrupt changes in the quantities as the numerical errors and the residuals of the governing equations among the nodal results. Furthermore, the required computational time and allocated computer memory are much reduced by the present solution algorithm. The cylinder is not divided into isotropic sub-cylinders. Therefore, artificial wave reflections from the hard interfaces are avoided. Time variations of the temperatures, displacements, and stresses due to the dynamic or impulsive loads are determined by solving the resulted highly nonlinear governing equations using an iterative updating solution scheme. A sensitivity analysis includes effects of the volume fraction indices, dimensions, and temperature-dependency of the material properties is performed. Results reveal the significant effect of the temperature-dependency of the material properties on the thermoelastic stresses and present some interesting characteristics of the thermoelastic and wave propagation behaviors.