Investigation of all-solid photonic bandgap fiber with low losses in low-order bandgaps

We report synoptically an investigation of design, fabrication and characterization of a new all-solid photonic bandgap fiber. By introducing an index depressed layer around a high index core in every unit cell of photonic crystal cladding, a novel all-solid bandgap fiber is predicted to obtain low confinement and bend losses within low-order bandgaps. After optimizing the structure parameters, we fabricate a batch of rods used for cladding cells, select a pure-silica rod for core cell and an inner-hexagonal jacket tube. We demonstrate an all-solid bandgap fiber with the transmission loss as low as 2 dB/km at 1,310 nm and a bandwidth of over 700 nm within the first bandgap. The guiding properties are also measured, respectively, such as transmission spectrum, attenuation spectrum, bend loss, mode field intensity profile, and chromatic dispersion.     

光子晶体光纤布拉格光栅传输谱特性的分析

研究光子晶体光纤中光纤光栅的传输谱特性对于研制基于光子晶体光纤的光纤光栅器件有着重要的意义。结合耦合模理论和光束传输相关函数方法,对一种典型光子晶体光纤中的布拉格光栅(FBG)传输谱进行了理论分析。比较了光子晶体光纤中布拉格光栅与常规布拉格光栅的传输谱。数值分析了光纤截面结构变化对于光栅传输谱的影响,并给出这种影响的定性解释。计算结果显示,与常规光纤光栅相比,包层模共振引起的损耗峰与正反向纤芯模耦合引起的损耗峰可以相比拟,而包层模共振的间隔也比常规光纤中光纤光栅的包层模共振间隔要大。同时给出了晶体光纤截面上空气孔的占空比,空气孔的排布层数对于传输谱影响的规律。     

Characteristics of the transmission spectrum of the long period fiber gratings based on the coupling of core mode to the higher order cladding modes

The characteristics of the transmission spectrum of the Long-period fiber gratings (LPFGs) based on the coupling of core mode to a higher order cladding mode (HE mode) are investigated using the coupled mode theory. This kind of LPFGs is different from that based on the coupling of core mode to a lower order cladding mode because of the effect of the coupling of core mode to EH cladding mode. When the cladding mode order is higher, the coupling coefficients of core mode to HE and EH cladding modes are comparable and both of the propagation constants of HE and EH cladding modes approach, so the spectrum has an additional loss peak. The bandwidth of LPFG based on the coupling of core mode to different cladding mode differs greatly. With the change of the mode orders from lower to higher, the transmission spectrum changes from narrow to wide and more narrow.     

长周期光纤光栅(LPFGs)的谱结构研究

利用相位匹配条件,从理论和实验上研究了均匀LPFGs的谱结构特点.结果表明,导模和不同包层模耦合产生的光谱特性有很大差别.在模序较小时,谱宽较小;模序增加,谱宽也增加;在某一模序附近,谱宽达到最大;以后随模序增加,谱宽迅速减小.给出了LPFGs中透射谱的最大损耗率及3 dB带宽与包层模序、光栅周期、耦合系数和栅长的关系.这些关系对设计满足特定最大损耗率和带宽的带阻滤波器或增益均衡器提供一种理论参考.选用不同的包层模、耦合系数和栅长,可以设计出谱宽很大或很小的LPFGs.     

含有光纤光栅的萨尼亚克环的透射特性分析

详细分析了由光纤光栅和萨尼亚克（Sagnac)环构成的透射滤波器的特性,给出了在均匀光纤光栅的情况下,该滤波器透过率的解析公式,结果表明该滤波器的透射光谱是余弦函数调制后的光纤光栅反射光谱,当光纤光栅是“强”耦合时,该滤波器可以构成多通带滤波器,而当纤光栅为“弱”耦合时,该滤波器可以构成单通带滤波器,这些滤波器可应用于现代光纤通信系统中。     

长周期光纤光栅耦合模理论分析

长周期光纤光栅作为透射型光无源器件,以其在通信和传感领域具有广阔应用前景而引起人们的关注。要得到满足性能要求的光纤光栅,对其透射谱的分析是基础。通过耦合模方程确定了基模和一阶各次包层模之间的耦合常数。在设定的光纤光栅参数条件下,通过Matlab进行模拟得到了最终需要的长周期光纤光栅透射谱,并由此得出：长周期光纤光栅谐振波长出现的位置主要由光栅的周期决定,损耗大小可以通过调节光栅长度和折射率来实现。     

基于少模光纤的SBS光谱阈值特性分析

受激布里渊散射会影响少模光纤传输系统中的信噪比、传输距离与传输容量,是影响传输系统入纤功率提高的重要因素。对阶跃型少模光纤的受激布里渊散射谱的阈值进行了研究,运用了布里渊散射谱、模式联运谱的数学模型对少模光纤散射特性进行了分析,探讨了少模光纤布里渊散射增益谱、阈值增益系数,以及光纤各参量对少模光纤阈值的影响。分析结果表明：SI-10阶跃型少模光纤中存在五种不同的传播模式,不同模式有各自的传输常数以及有效折射率,各模式相互作用导致模式展宽、增益降低,且布里渊散射谱峰值增益系数为3.9×10-11 m·W-1。阈值增益系数受到光纤传感距离的影响,在相对较短距离传输中阈值急速下降,且其趋势随长度增加渐趋平缓,当光纤长度达到22 km时阈值增益系数趋于常数18.1。少模光纤的阈值因光纤长度的递增而递减,且递减趋势渐缓趋于常数20.5 dBm;少模光纤不同模式受激布里渊散射的阈值也因光纤长度的递增而递减最终趋于常数,且不同模式的阈值因模式阶数的递增而递增;少模光纤的阈值随着光纤衰减系数和纤芯半径的递增而递增,且增加趋势缓慢增大。不同衰减系数的光纤其阈值在不同长度趋于常数,衰减系数越大受激布里渊散射阈值越大越容易趋于一常数。     

单点相移光纤光栅光谱特性的研究与应用

可调谐窄线宽掺铒光纤激光器具有线宽窄、噪声低等优点,在光纤通信、光纤传感、相干探测和合成等方面有广泛的应用。根据传输矩阵法, 利用Matlab软件仿真出单点相移光纤光栅的透射谱,通过对不同相移量、不同相移点位置、不同光栅的长度以及不同纤芯有效折射率的单点相移光纤光栅透射谱进行分析,得到了影响其相移峰的透射率、线宽、位置的主要因素,并提出了一种利用相移量为π且相移点在中点的相移光纤光栅作为滤波窗口的可调谐窄线宽掺铒光纤激光器的方案。     

Coaxial fiber-optic chemical-sensing excitation-emission matrix fluorometer

Great reductions in the overall size and complexity of high throughput multichannel UV-visible fluorometers were achieved by coupling a compact optical fiber array to compact dispersive transmission optics. The coaxial configuration centers on the insertion of a silica/silica optical fiber into the hollow region of a UV-fused silica capillary waveguide. The outer core delivers the maximum power of the narrow wavelength region of the excitation spectrum created by coupling a xenon arc discharge lamp to a compact spectrometer. The molecular fluorescence resulting from the interaction of light emitted at the distal end of the hollow waveguide and the sample matrix is received and transmitted to a CCD via a compact dispersive grating-prism (grism) optical assembly. A linear array of the coaxial optical fibers permits a full excitation-emission matrix spectrum of the analyte matrix to be projected onto the face of the CCD. The in situ identification and monitoring of polycyclic aromatic hydrocarbons was carried out for the initial application testing for this prototype.     

Multiple parameter vector bending and high-temperature sensors based on asymmetric multimode fiber Bragg gratings inscribed by an infrared femtosecond laser

We present a multiple parameter integrated fiber sensor that can detect vector bending and ambient temperature simultaneously with a single asymmetric multimode fiber Bragg grating. Multimode Bragg gratings were fabricated in an all-silica core fiber by an infrared femtosecond laser, which showed multiple transmission dips in the transmission spectrum. Bending and ambient temperature fluctuations affect the shapes of multiple transmission dips in different ways. In bending, different dips have different sensitivities. On the other hand, temperature fluctuations tended to influence the dips uniformly across different dips. By analyzing the changing spectrum of dips, one can distinguish the changes induced by bending or temperature fluctuations. Furthermore, the high thermal stability of Bragg gratings inscribed by an infrared femtosecond laser can make this double parameter fiber sensor work in very harsh, high-temperature environments.     

光子晶体光纤中级联长周期光栅双谐振波长干涉的研究

通过分析单模光纤SMF中的LPG对的传输特性及几个因素对干涉透射谱的影响,并结合前期工作,主要研究光子晶体光纤(PCF)中的LPG对在1665 nm附近U波段传输特性.结合光栅耦合强度与波长的关系以及拍长与波长的关系,对PCF中LPG对的参数进行选择设计,得到双谐振波长的干涉谱,级联LPG对构成的MZI干涉光谱在两个谐振波长处由于耦合强度不同而不同.     

Mode attenuation in microstructured optical fibers with absorbing coating

The characteristics of leaky modes in microstructured fibers with finite-thickness absorbing coatings are studied theoretically and experimentally. It is shown that, if the thickness of the coating is constant, the fiber has a quasi-periodic transmission spectrum. The period and depth of modulation of the spectrum are determined by resonance coupling between the modes of the fiber and coating. Since the constants of mode propagation in the coating are very sensitive to environmental parameters, the discovered effect seems to be promising for sensor applications.     

基于回音壁模式微球腔的PDH稳频技术

光学微球腔因其回音壁模式可获得极高的品质因数而受到广泛关注.本文分析了Fabry-Perot腔和微球腔的基本原理,通过CO2激光熔融光纤实验制得了直径为1.2 mm的微球腔,并测试了微球腔和锥形光纤耦合结构的耦合特性.采用典型的PDH稳频系统设计了基于微球腔的稳频系统,分析了用于鉴频的误差曲线的吸收特性和色散特性,对比了不同调制频率、微球腔直径、耦合损耗、传输损耗下与误差曲线斜率的关系.结果表明:耦合状态下最大Q值可达到1.1×108,调节微球腔内横磁模和横电模的转换可优化耦合效率,匹配微球腔和锥形光纤的尺寸得到了径向二阶模式的透射谱,误差曲线效率达到15.4A mW/MHz.球腔在提高PDH稳频技术灵敏度上具有巨大潜力.     

Optical refractometer based on an asymmetrical twin-core fiber Michelson interferometer

We report and demonstrate an optical refractometer based on a compact fiber Michelson interferometer. The Michelson interferometer is composed of an asymmetrical twin-core fiber containing a central core and a side core. By chemically etching a segment of the twin-core fiber until the side core is exposed, the effective index of the side core in the etched region is sensitive to the environmental refractive index, which leads to a shift of the transmission spectrum of the Michelson interferometer. The experimental results show that such a device has a refractive index resolution of more than 800 nm/refractive index unit in the range of 1.34-1.37.     

锥形光纤间耦合特性的分析与检测

将通信光纤的末端拉制成锥形，利用光信号在光纤锥形区特有的传输和耦合特性，实现了光纤的耦合、连接和分束。用耦合模理论分析了锥形光纤间的传输和耦合性质，给出了光信号两锥形光纤间的耦合与两锥形光纤的距离和锥形区重叠长度等实验结果。     

Novel fiber design for broadband long period gratings

We report a novel fiber design for obtaining long period gratings (LPGs) having a broad transmission spectrum. These gratings are based on guided to guided mode coupling in a staircase profile fiber. Numerical simulations predict 20 dB bandwidths as high as 100 nm and an estimated insertion loss of less than 1 dB. Such broadband LPGs are expected to find applications in many all fiber components.     

锥形光纤激发盘腔光学模式互易性研究

光学谐振腔由于其高Q值特性,作为谐振式陀螺的核心元件,有望实现谐振式陀螺的小型化、集成化,但是非互易性噪声成为制约其精度提高的不利因素. 介绍了采用传统半导体工艺制备的盘型腔与熔融法拉制的锥形光纤组成的耦合系统. 当盘型腔在光纤锥区的不同位置进行耦合谐振时,将输入输出正/反对调,观察到输出透射谱发生偏差,谐振频率、耦合效率以及Q值均发生变化,即存在非互易性现象. 用Rsoft软件对锥形光纤倏逝场分布特性进行仿真,理论分析了非互易性产生的原因. 以此可抑制谐振式光学陀螺应用中由锥形光纤与谐振腔组成的耦合系统产生的非互易性噪声. 关键词： 光学谐振腔 锥形光纤 非互易性 谐振式陀螺     

锥形光纤间的耦合特性

将通信光纤的末端拉制成锥形,利用光信号在光纤锥形区特有的传输和耦合特性,实现了光纤的耦合、连接和分束.用耦合模理论分析了锥形光纤间的传输和耦合性质,给出了光信号两锥形光纤间的耦合与两锥形光纤的距离和锥形区重叠长度等实验结果.     

纤维光锥有效透过率的理论分析

光锥的有效透过率不仅影响光锥与CCD的耦合效率,而且会影响到耦合器件的信噪比.本文主要从理论上讨论了影响光锥有效透过率性能的因素,从纤维光学元件的实际内部结构推导出了其实际有效填充率,从光线在光锥中的传输特征推导出了光线在光锥中传播时产生的衰减损耗,最后提出了提高光锥有效透过率的方法和途径.     

倾斜光纤光栅谱特性

基于倾斜光纤光栅耦合模理论,采用数值分析法研究了前后向导模耦合时倾斜角度和调制深度对倾斜光纤光栅反射谱的影响,以及导模和辐射模耦合时针对不同的入射光偏振态在倾斜角度、调制深度、光栅长度等不同时倾斜光纤光栅透射谱(或反射谱)的特性.研究结果表明,在前后向导模耦合时,不同偏振态入射光的光谱几乎相同;而对于辐射模耦合,由于反射谱的包络受消光系数的调制,而不同偏振态入射光的消光系数不同,并且倾斜角度越大不同偏振态的入射光的消光系数差别越大,故在研究辐射模耦合时需要将偏振态予以考虑.