Analyse de la relations structure-proprietes des melanges PVC-PMMA

Analysis of Structure-Properties Relationship of PVC-PMMA Blends. This paper presents a study of the structure-properties relationship of PVC-PMMA blends. For that purpose, blends of variable compositions from 0 to 100 wt % were prepared. Their physico-chemical characterization was carried out by differential scanning calorimetric analysis (DSC) and Fourier Transform Infrared spectroscopy (FTIR). The analysis of thermograms showed polymer miscibility up to 60 wt % PMMA. This miscibility is due to a specific interaction of hydrogen bonding type between carbonyl groups (C+O) of PMMA and hydrogen from (CHCl) groups of PVC. The two-band deconvolution showed an increase in associated groups percentage in the domain of miscibility. The variation of mechanical properties such as tensile behaviour, hardness and impact resistance was investigated for all blend compositions. The effect of a plasticizer on the same properties was considered. The obtained results show that a range of properties can be generated according to the blend compositions.     

Study of the miscibility and the thermal degradation of PVC/PMMA blends

The aim of this paper is to study the miscibility and the thermal degradation of PVC/PMMA blends. For that purpose, blends of variable compositions from 0 to 100 wt% were prepared with and without plasticizer. Their physico-chemical characterization was carried out by differential scanning calorimetric analysis (DSC) and Fourier transform infrared spectroscopy (FTIR). Their thermal degradation under nitrogen at 185°C was studied and the HCl evolved from PVC was measured by the pH method. Degraded samples were characterized, after purification, by FTIR and UV-visible spectroscopy. The DSC analysis showed polymer miscibility up to 60 wt% of PMMA. This miscibility is due to a specific interaction of hydrogen bonding type between carbonyl groups (C=O) of PMMA and hydrogen from (CHCl) groups of PVC as evidenced by FTIR analysis. On the other hand, it was found that PMMA exerted a stabilizing effect on the thermal degradation of PVC by reducing the zip dehydrochlorination and by leading to the formation of short polyenes.     

Miscibility of PVC/PMMA blends by vicat softening temperature, viscometry, DSC and FTIR analysis

 This paper deals with the miscibility of polyvinyl chloride (PVC) with polymethyl methacrylate (PMMA). Blends of variable compositions from 0 to 100 wt% were prepared in the presence (15, 30 and 50 wt%) and in the absence of di ethyl- 2 hexyl phtalate as plasticizer. Their miscibility was investigated by using various analytical methods: determination of the Vicat softening temperature, a viscometry method based on the criterion of polymer–polymer miscibility, differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR). The results show that the plot of Vicat temperature against composition is a continuous curve, indicating the miscibility of the blend. The viscometry method and DSC find that the two polymers are miscible up to about 60 wt% of PMMA. This miscibility is due to a specific interaction of hydrogen bonding type between carbonyl groups (C=O) of PMMA and hydrogen from (CHCl) groups of PVC, as evidenced by FTIR spectroscopy. The two-band deconvolution shows an increase in associated groups percentage in the domain of miscibility.     

DC Electrical Study of Modified PMMA,PVC and their Blend

Summary: Thin films of high molecular weight PMMA, PVC and their blend were prepared with solution cast method. Further they were modified by adding Camphor Sulphonic Acid (CSA) to them. DSC studies indicate single glass transition temperature (Tg) for unmodified as well as modified blends indicating the miscibility of polymers. FTIR studies show the interaction between CSA-PVC, CSA-PMMA, CSA-(PVC+PMMA) blend. The D.C. electrical study was carried out at various temperatures from room temperature (307 K) to 373 K. After modification the variation of DC conductivity (σ) is found to decrease in PVC and the PVC-PMMA blend whereas it is found to increase in PMMA with rise in temperature.     

Thermo-oxidative dehydrochlorination of rigid and plasticised poly(vinyl chloride)/poly(methyl methacrylate) blends

The aim of this work was to study the thermo-oxidative dehydrochlorination of rigid and plasticised poly(vinyl chloride)/poly(methyl methacrylate) blends. For that purpose, blends of variable compositions from 0 to 100 wt% were prepared in the presence (15, 30 and 50 wt%) and in the absence of diethyl-2-hexyl phthalate as plasticiser. Their miscibility was investigated by using differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR). Their thermo-oxidative degradation at 180 ± 1 °C was studied and the amount of HCl released from PVC was measured by a continuous potentiometric method. Degraded samples were characterised, after purification, by FTIR spectroscopy and UV-visible spectroscopy. The results showed that the two polymers are miscible up to 60 wt% of poly(methyl methacrylate) (PMMA). This miscibility is due to a specific interaction of hydrogen bonding type between carbonyl groups (CO) of PMMA and hydrogen (CHCl) groups of PVC as shown by FTIR analysis. On the other hand, PMMA exerted a stabilizing effect on the thermal degradation of PVC by reducing the zip dehydrochlorination, leading to the formation of shorter polyenes.     

Application of a bio‐based polyester plasticizer modified by hydrosilicon‐hydrogenation reaction in soft PVC films

A kind of bio‐based plasticizer, poly (hexanediol maleic) (MH), was synthesized using 1,6‐hexalene and maleic acid as raw materials, and it was modified by hydrosilicon‐hydrogenation reaction to improve its plasticizing efficiency. The chemical structure and plasticizing performance of MH and its modification product (MHA) were characterized by Fourier‐transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance (¹H‐NMR), X‐ray photoelectron spectroscopy (XPS), and Dynamic mechanical analysis (DMA). It was found that the hydrosilicon‐hydrogenation modification effectively improved the plasticizing efficiency of MH, reflecting on the decreased T_g and the increased elongation at break of PVC blends. The migration resistance of PVC blends was tested and analyzed by solubility parameters, which revealed that the migration stabilities of PVC blends were promoted after modification. It was verified that the hydrogen bonding interaction between the C?O group of plasticizers and α‐hydrogen of PVC exhibited in FTIR analysis was the main reason for the improvement of plasticizer performance of MH. Moreover, a new hydrogen bonding formed between Si? O? Si of MHA and the α‐hydrogen of PVC derived from XPS also caused the further improvement of plasticity for MHA.     

含氯聚合物和乙烯-醋酸乙烯酯共聚物共混体系的红外光谱研究

关于氯化聚乙烯(CPE)或聚氯乙烯(PVC)与乙烯—醋酸乙烯酯共聚物(EVA)共混体系相容性的研究,已有不少报道,其中Coleman等人运用FTIR方法研究了含VA45％的EVA与CPE、PVC的共混体系,测定了该体系的低临界共溶温度(LCST)。一般认为,如果VA含量更低,由于EVA本身的结晶,共混体系将变得难以     

FTIR studies of PVC/PMMA blend based polymer electrolytes

The polymer electrolytes composing of the blend of polyvinyl chloride-polymethyl methacrylate (PVC/PMMA) with lithium triflate (LiCF3SO3) as salt, ethylene carbonate (EC) and dibutyl phthalate (DBP) as plasticizers and silica (SiO2) as the composite filler were prepared. FTIR studies confirm the complexation between PVC/PMMA blends. The CCl stretching mode at 834 cm-1 for pure PVC is shifted to 847 cm-1 in PVC-PMMA-LiCF3SO3 system. This suggests that there is interaction between Cl in PVC with Li+ ion from LiCF3SO3. The band due to OCH3 at 1150 cm-1 for PVC-PMMA blend is shifted to 1168 cm-1 in PVC-PMMA-LiCF3SO3 system. This shift is expected to be due to the interaction between Li+ ion and the oxygen atom in PMMA. The symmetric vibration band and the asymmetric vibration band of LiCF3SO3 at 1033 and 1256 cm-1 shifted to 1075 and 1286 cm-1 in the DBP-EC plasticized PVC-PMMA-LiCF3SO3 complexes. The interaction between Li+ ions and SiO2 will lead to an increase in the number of free plasticizers (which does not interact with Li+ ions). When the silica content increases from 2% to 5%, the intensity of the peak at 896 cm-1 (due to the ring breathing vibration of free EC) increases in PVC-PMMA-LiCF3SO3-DBP-EC system.     

Investigation at the chain segmental level of the miscibility of poly(vinyl chloride)/atactic poly(methyl methacrylate) blends

We employed high‐resolution ¹³C cross‐polarization/magic‐angle‐spinning/dipolar‐decoupling NMR spectroscopy to investigate the miscibility and phase behavior of poly(vinyl chloride) (PVC)/poly(methyl methacrylate) (PMMA) blends. The spin–lattice relaxation times of protons in both the laboratory and rotating frames [T₁(H) and T_1ρ(H), respectively] were indirectly measured through ¹³C resonances. The T₁(H) results indicate that the blends are homogeneous, at least on a scale of 200–300 Å, confirming the miscibility of the system from a differential scanning calorimetry study in terms of the replacement of the glass‐transition‐temperature feature. The single decay and composition‐dependent T_1ρ(H) values for each blend further demonstrate that the spin diffusion among all protons in the blends averages out the whole relaxation process; therefore, the blends are homogeneous on a scale of 18–20 Å. The microcrystallinity of PVC disappears upon blending with PMMA, indicating intimate mixing of the two polymers. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2390–2396, 2001     

Early Main Group Metal Catalysis: How Important is the Metal?

Organocalcium compounds have been reported as efficient catalysts for various alkene transformations. In contrast to transition metal catalysis, the alkenes are not activated by metal–alkene orbital interactions. Instead it is proposed that alkene activation proceeds through an electrostatic interaction with a Lewis acidic Ca²⁺. The role of the metal was evaluated by a study using the metal‐free catalysts: [Ph₂N⁻][Me₄N⁺] and [Ph₃C⁻][Me₄N⁺]. These “naked” amides and carbanions can act as catalysts in the conversion of activated double bonds (CO and CN) in the hydroamination of Ar NCO and R NCN R (R=alkyl) by Ph₂NH. For the intramolecular hydroamination of unactivated CC bonds in H₂CCHCH₂CPh₂CH₂NH₂ the presence of a metal cation is crucial. A new type of hybrid catalyst consisting of a strong organic Schwesinger base and a simple metal salt can act as catalyst for the intramolecular alkene hydroamination. The influence of the cation in catalysis is further evaluated by a DFT study.     

Development and characterization of reactive extruded PVC/polyacrylate blends

This paper describes a method to obtain polymer blends by the absorption of a liquid solution of monomer, initiator, and a crosslinking agent in suspension type porous poly(vinyl chloride) (PVC) particles, forming a dry blend. These PVC/monomer dry blends are reactively polymerized in a twin‐screw extruder to obtain the in situ polymerization in a melt state of various blends: PVC/poly(methyl methacrylate) (PVC/PMMA), PVC/poly(vinyl acetate) (PVC/PVAc), PVC/poly(butyl acrylate) (PVC/PBA) and PVC/poly(ethylhexyl acrylate) (PVC/PEHA). Physical PVC/PMMA blends were produced, and the properties of those blends are compared to reactive blends of similar compositions. Owing to the high polymerization temperature (180°C), the polymers formed in this reactive polymerization process have low molecular weight. These short polymer chains plasticize the PVC phase reducing the melt viscosity, glass transition and the static modulus. Reactive blends of PVC/PMMA and PVC/PVAc are more compatible than the reactive PVC/PBA and PVC/PEHA blends. Reactive PVC/PMMA and PVC/PVAc blends are transparent, form single phase morphology, have single glass transition temperature (T_g), and show mechanical properties that are not inferior than that of neat PVC. Reactive PVC/PBA and PVC/PEHA blends are incompatible and two discrete phases are observed in each blend. However, those blends exhibit single glass transition owing to low content of the dispersed phase particles, which is probably too low to be detected by dynamic mechanical thermal analysis (DMTA) as a separate T_g value. The reactive PVC/PEHA show exceptional high elongation at break (～90%) owing to energy absorption optimized at this dispersed particle size (0.2–0.8 µm). Copyright © 2005 John Wiley & Sons, Ltd.     

Structure of reactively extruded rigid PVC/PMMA blends

A novel route for producing polymer blends by reactive extrusion is described, starting from poly (vinyl chloride)/methyl methacrylate (PVC/MMA) dry blend and successive polymerization of MMA in an extruder. Small angle X‐ray scattering (SAXS) measurements were applied to study the monomer's mode of penetration into the PVC particles and to characterize the supermolecular structure of the reactive poly(vinyl chloride)/poly(methyl methacrylate) (PVC/PMMA) blends obtained, as compared to the corresponding physical blends of similar composition. These measurements indicate that the monomer molecules can easily penetrate into the PVC sub‐primary particles, separating the PVC chains. Moreover, the increased mobility of the PVC chains enables formation of an ordered lamellar structure, with an average d‐spacing of 4.1 nm. The same characteristic lamellar structure is further detected upon compression molding or extrusion of PVC and PVC/PMMA blends. In this case the mobility of the PVC chains is enabled through thermal energy. Dynamic mechanical thermal analysis (DMTA) and SAXS measurements of reactive and physical PVC/PMMA blends indicate that miscibility occurs between the PVC and PMMA chains. The studied reactive PVC/PMMA blends are found to be miscible, while the physical PVC/PMMA blends are only partially miscible. It can be suggested that the miscible PMMA chains weaken dipole–dipole interactions between the PVC chains, leading to high mobility and resulting in an increased PVC crystallinity degree and decreased PVC glass transition temperature (T_g). These phenomena are shown in the physical PVC/PMMA blends and further emphasized in the reactive PVC/PMMA blends. Copyright © 2005 John Wiley & Sons, Ltd.     

DSC and p-V-T Study of PVC/PMMA Blends

Poly(vinyl chloride)/Poly(methyl methacrylate) — PVC/PMMA — blends were investigated by comparative p-V-T and differential scanning calorimetry (DSC) measurements. The study was concentrated on the glass transition range of the blends, and it was found that the blends are characterized by a single glass transition temperature suggesting miscibility of the blend components. It is shown that the glass temperature of the blends increases with both increasing heating rate and pressure. In parallel hereto one observes a decrease in the volume expansion coefficients, which is more accentuated for the polymeric melts than for the polymeric glasses. The dependence of the glass temperature on the composition of the polymer blends shows a sigmoidal behaviour which is due to the fact that positive deviations of the glass temperature from values predicted by additivity rules are observed in the high PVC concentration range, whereas in the high PMMA range negative deviations occur. This suggests a denser packing of the blends and thus a stronger interaction between the blend components in the high PVC concentration range. These packing differences increase with increasing pressure and decreasing heating rate and are generally more accentuated for the glass temperatures evaluated from p-V-T measurements.This revised version was published online in November 2005 with corrections to the Cover Date.     

4‐Aminopyridinium hydrogen maleate

The title compound, C₅H₇N₂⁺·C₄H₃O₄⁻, crystallizes in space group P2₁ with one ion pair in the asymmetric unit. The hydrogen maleate anion possesses nearly planar geometry and displays an extremely short intramolecular O—H...O hydrogen bond, with an O...O distance of 2.4198 (19) Å. Classical N—H...O hydrogen bonds, together with short C—H...O contacts, generate an extensive hydrogen‐bonding network.     

Very strong centrosymmetric [O...H...O]+ and asymmetric [O-H...O]+ hydrogen bonds in a new POM-Based hybrid material

A specific assembly process, driven by coexisting X-H...O hydrogen bonding and X...O short intermolecular contacts (X = C, N, O) is described, in which the pseudo-Keggin polyoxoanion and two types of molecule...cation pairs (with C1 and C_i symmetries) were assembled to the programmed supramolecular architecture. Cooperation of the positive-charge, resonance effect and the O=C...O_terminal intermolecular contact led to the short and strong symmetrical [O...H...O]⁺ hydrogen bond (O...O = 2.449(13) Å) in one of the molecule...cation pairs [C₄H₉NO...H...ONC₄H₉]⁺ with the H-bonded proton in the center of inversion. The other [C₄H₉NOH...ONC₄H₉]+ molecule...cation pair (non-centrosymmetric) was formed through a very strong asymmetric [O.H.O]+ hydrogen bond of 2.431(13) Å in length which was created via the synergistic effect between the minor N-H...O secondary interaction, +CAHB (positive-charge-assisted hydrogen bond) and RAHB (resonance assisted hydrogen bond) mechanisms.     

Stability Enhancement of All‐Solid‐State H+ ISEs with Cross‐Linked Silicon‐Urethane Matrices

An all‐solid‐state hydrogen‐ion‐selective electrode (ASHISE) was fabricated using the polymer hybrid membrane. Polymer membranes composed of Tecoflex polyurethane (TPU), polyvinyl chloride (PVC), silicon rubber (SR), and additives (KTpClPB, DOA, and TDDA) were cast on a carbon rod. The TPU/SR hybrid membrane exhibited a longer lifetime and a higher sensitivity in the sensing of the H⁺ ion compared to conventional TPU/PVC and PVC/SR hybrid membranes. Moreover, the addition of SiCl₄ to TPU‐based matrices enhanced the potentiometric response and ISE stability, due to the chemical bonding between Si and C?O in urethane, in which the cross‐linking configuration was confirmed by DSC, FT‐IR, and XPS experiments. TPU/SR membranes containing SiCl₄ were rendered more stable and showed a pH response over a wide range (i.e., pH 2–11.5) with the slope of 60±2 mV/pH for more than four months. The ASHISE exhibited a small interfering potential variation in the wide range of the salt concentration (from 1.0×10^?6 M up to 0.1 M). The ASHISE showed a result comparable to a commercial clinical blood analyzer.     

聚氯乙烯／线性低密度聚乙烯共混体系的相容性

用动态力学分析（ＤＭＡ）和傅利叶变换红外光谱（ＦＴＩＲ）研究了氢化聚丁二烯－ｂ－聚甲基丙烯酸甲酯（ＨＰＢＤ－ｂ－ＰＭＭＡ）共聚物增容剂对聚氯乙烯（ＰＶＣ）与线性低密度聚乙烯（ＬＬＤＰＥ）共混体系的增容作用．增容剂使共混物中两相的玻璃化温度发生变化，说明其相容性增加．ＦＴＩＲ的结果表明，增容剂中羰基与ＰＶＣ的α氢形成氢键，使ＣＯ，Ｈ─Ｃ及Ｃ─Ｃｌ的振动频率变化，峰形加宽．     

Miscibility of poly(vinyl chloride) with poly(methyl-co-hexyl acrylate) and poly(methyl-co-2 ethyl hexyl acrylate)

The miscibility and phase behavior in blends of PVC with poly(methyl-co-hexyl acrylate)[MHA] and poly(methyl-co-2 ethyl hexyl acrylate)[MEH] were studied. It was found that PVC is miscible with MHA copolymers having a HA volume fraction from 0.30 to 0.92 and MEH copolymers having an EH volume fraction from 0.30 to 0.83 at 100°C. By applying the mean field theory to the phase diagrams of these blend systems, segmental interaction parameters which represent the binary interaction between different monomer units were estimated. The calculated values reflect the fact that the miscibility window observed for PVC/MHA and PVC/MEH blend systems was attributed to the effect of repulsion between different monomer units within the copolymer. To investigate the effect of specific interaction on the miscibility for these blend systems, an attempt was also made to describe the blend interaction parameter as a function of polar group concentration in the acrylate copolymer. The blend interaction parameter values exhibit a u-shaped curve as a function of the weight fraction of C?O group in the copolymer, and the lowest blend interaction parameter value appears at about 0.24 C?O weight fraction.     

Infrared Spectroscopy and X-Ray Diffraction Studies of C?H…O Hydrogen Bonding and Thermal Behavior of Biodegradable Poly(hydroxyalkanoate)

Infrared (IR) spectra and wide-angle X-ray diffraction (WAXD) patterns of poly(3-hydroxybutyrate) (PHB) and its copolyester, poly(3-hydroxybutyrate-co-3-hydroxyhexanoate), P(HB-co-HHx) (HHx = 12 mol%) were measured over a temperature range of 20 °C to higher temperatures (PHB, 185 °C, HHx = 12 mol%, 140 °C) to explore their structure change and thermal behavior and molecular interaction. The WAXD measurements revealed that the a lattice parameter increases significantly with temperature, while the b lattice parameter varies a little in the crystalline PHB and P(HB-co-HHx). It seems that the intermolecular interaction between the CO group of one helical structure and the CH₃ group of the other helical structure decreases along the a axis of crystalline PHB and P(HB-co-HHx) with temperature. The temperature-dependent IR spectral variations were analyzed for the CH stretching, CO stretching, CH₃ deformation, and C O C stretching variation regions, and bands characteristic of crystalline and amorphous parts were identified in each region. It was found from the anomalous frequencies of the CH₃ asymmetric stretching and CO stretching bands of PHB and P(HB-co-HHx) and the X-ray crystallographic structure of PHB that there is an intermolecular interaction (C H…OC hydrogen bond) between the CO group and the CH₃ group combining two helical structures in PHB and P(HB-co-HHx). In this review paper we discuss the role of the C H…OC hydrogen bonding and the crystal and lamella structure of PHB and P(HB-co-HHx) (HHx = 12 mol %) in comparison with the structure of Nylon.     

Thermal degradation studies in poly(vinyl chloride)/poly(methyl methacrylate) blends

The miscibility, morphology, and thermal properties of poly(vinyl chloride) (PVC) blends with different concentrations of poly(methyl methacylate) (PMMA) have been studied. The interaction between the phases was studied by FTIR and by measuring the glass transition temperature (T_g) of the blends using differential scanning calorimetry. Distribution of the phases at different compositions was studied through scanning electron microscopy. The FTIR and SEM results show little interaction and gross phase separation. The thermogravimetric studies on these blends were carried out under inert atmosphere from ambient to 800 °C at different heating rates varying from 2.5 to 20 °C/min. The thermal decomposition temperatures of the first and second stage of degradation in PVC in the presence of PMMA were higher than the pure. The stabilization effect on PVC was found most significant with 10 wt% PMMA content in the PVC matrix. These results agree with the isothermal degradation studies using dehydrochlorination and UV-vis spectroscopic results carried out on these blends. Using multiple heating rate kinetics the activation energies of the degradation process in PVC and its blends have been reported.