蓝色有机电致磷光主体材料

有机电致发光(OLEDs)因其具有驱动电压低、主动发光、亮度高、视角宽、响应快、耐冲击与震动等特点,在平板显示与照明领域有着广阔的应用前景。磷光有机电致发光二极管(PhOLEDs)由于能够同时利用三重态和单重态激子,内量子效率从理论上可达到100%,从而克服了传统荧光OLEDs只利用单重态激子时效率25%的限制,在过去的几十年里受到业内人士的极大关注。但要实现三重态磷光,通常需要将重金属原子与主体材料进行掺杂,而重金属配合物的磷光寿命相对较长,容易引起浓度猝灭和三重态-三重态湮灭,所以需要找到合适的主体材料与重金属的磷光发射体进行掺杂来减少上述因素的影响从而得到高性能的电致磷光器件。本文综述了近年来国内外蓝色有机电致磷光主体材料的研究状况,并对空穴传输型、电子传输型和双极传输型的蓝色磷光主体材料按照官能团的不同进行了分类总结和评述,并对其光物理性质、热学性质、电化学性质及器件性能等作了详细归纳比较,最后展望了蓝色有机电致磷光主体材料的前景和发展趋势。     

掺杂发光有机电致磷光器件工作原理及主体材料

本文总结了基于掺杂发光的有机电致磷光器件(PhOLED)中磷光材料被激发的途径及机理,并指出不同主体材料对器件性能的不同影响.全面介绍了小分子主体材料研究的新进展及它们在PhOLEDs器件中的运用.比较和讨论了基于各种不同性质主体材料的器件性能,指出主体材料选择策略.同时讨论了各类主体材料的分子结构、热稳定性、三线态能级、载流子迁移率及HOMO/LUMO能级之间的关系,揭示了上述特性对器件性能影响.     

红色铱配合物磷光材料及器件的研究进展

有机电致发光器件具有驱动电压低、高亮度、高效率等优点,引起了研究人员的广泛关注,在固态照明和平板显示领域具有广阔应用前景。 在绿、蓝、红三基色器件中,绿光器件和蓝光器件的性能普遍优于红光器件,基本满足了产业化的需要;目前红色有机电致发光材料及器件的研究进展相对缓慢。 因为红光材料的能隙较窄,致使主客体材料之间能级匹配困难,导致红光器件普遍效率低、色纯度差,但是,红光材料是获得白光器件必不可少的材料。 因此,如何获得高性能红光材料对于有机电致发光器件的发展至关重要。 本文综述了近年来红色铱配合物磷光材料及器件的研究进展,对提升效率和色纯度的方法进行重点阐述;并结合现有工作,对红色有机电致磷光材料与器件的前景进行展望。     

以铱为内核的有机电致磷光材料

有机电致磷光材料可以同时利用单线态和三线态激子发光,具有发光效率高等优点,成为近年来研究的热点。本文综述了以铱为内核的有机电致磷光材料的研究进展、存在问题和研究趋势,并简要介绍了用于制作有机磷光器件的主体材料。     

以铱为内核的有机电致磷光材料

有机电致磷光材料可以同时利用单线态和三线态激子发光,具有发光效率高等优点,成为近年来研究的热点。本文综述了以铱为内核的有机电致磷光材料的研究进展、存在问题和研究趋势,并简要介绍了用于制作有机磷光器件的主体材料。     

以铱为内核的有机电致磷光材料

有机电致磷光材料可以同时利用单线态和三线态激子发光,具有发光效率高等优点,成为近年来研究的热点.本文综述了以铱为内核的有机电致磷光材料的研究进展、存在问题和研究趋势,并简要介绍了用于制作有机磷光器件的主体材料.     

小分子蓝色磷光主体材料

有机电致发光器件是有机光电子领域的研究热点,在平板显示和固体照明领域有着广阔的应用前景.目前,由于器件效率和稳定性的问题,蓝色磷光器件是有机电致发光器件的瓶颈,而蓝色磷光主体材料的选择是影响蓝色磷光器件性能的关键因素.综述了小分子蓝色磷光主体材料的最新研究进展,重点介绍了各类小分子蓝色磷光主体材料的设计思想、器件性能.包括空穴传输性主体材料、含硅主体材料、电子传输性主体材料、双极主体材料和可湿法加工的蓝色磷光小分子主体材料的结构、特点及相应器件性能.最后对小分子蓝色磷光主体材料的发展方向进行了展望.     

金属有机电致磷光材料研究进展

综述了近几年来用于有机发光二极管中的金属有机电致磷光材料的研究进展, 重点评述了重金属铱配合物、稀土元素配合物和含金属配合物的聚合物磷光材料近年来的研究进展, 展望了金属有机配合物电致磷光材料的发展前景.     

基于磷光材料的电致发光二极管研究进展

电致发光二极管(LEDs)具有能耗低、寿命长、绿色环保等优点,在固态照明、全色显示等领域具有广阔的应用前景。 与传统的荧光电致LEDs相比,磷光电致LEDs能够同时利用单重态和三重态激子,理论上可以使器件的内量子效率达到100%,突破5%的外量子效率极限。 因此,发展高效的磷光材料以及实现其在电致LEDs中的应用是非常有意义的。 本文综述了目前主要的磷光材料,包括有机金属配合物、纯有机分子、聚合物、金属有机框架材料和碳量子点等,并总结了稀有金属配合物和纯有机分子在电致磷光 LEDs中的研究进展,同时对电致磷光LEDs的发展前景进行展望。     

基于咔唑-三唑的新型主体材料及天蓝光有机电致磷光器件

本研究针对蓝光主体材料相对缺乏的现状,利用有机电致磷光器件高效率的优势,选择1,2,4-三唑为电子传输功能基团、咔唑为空穴传输功能基团,设计、制备了新型主体材料oCzTz。通过邻位取代方式实现了分子立体构型高度扭曲,从而使分子的三重态能量达到3.01eV;oCzTz具有较高的热分解温度(353℃)和玻璃化转变温度(110℃);量化计算显示,分子的前线轨道在咔唑和三唑基团之间高度分离。以oCzTz为主体、以FIrpic为发光客体的天蓝光电致磷光器件启亮电压为3.4V,电流效率和功率效率分别高达37.2cd·A-1和29.2lm·W-1,是以TPBI为电子传输层的同类器件的最高效率之一。     

高效溶液法小分子磷光电致发光器件研究

以小分子化合物CDBP[4,4′-bis(carbazol-9-yl)-9,9-dimethyl-fluorene]为主体材料,Ir(pppy)3[tris(5-phenyl-10,10-dimethyl-4-aza-tricycloundeca-2,4,6-triene)Iridium(III)]为磷光客体材料,采用溶液法和真空蒸镀法相结合的制备工艺,制作了小分子磷光电致发光器件.研究表明,通过器件结构的优化,Ir(pppy)3(重量百分比为2)掺杂的多层绿光电致发光器件效率达22.0 cd/A,最大亮度达到26600 cd/m²,这一结果可与当今基于真空蒸镀的小分子或基于溶液法的高分子磷光电致发光器件性能相媲美.本工作为降低有机电致发光器件的成本,扩展溶液法有机电致发光器件制备工艺中材料的选择范围提供了实验依据.     

基于磷光发射的有机电致白光器件的研究进展

由于旋轨偶合作用,磷光材料可以同时利用单线态和三线态激子,将其应用于电致白光器件的制作,能够显著提高器件的效率。本文根据磷光电致白光器件结构的不同,综述了国内外在磷光白光电致发光器件领域研究的主要进展。     

有机分子电致发光材料进展*

由于有机电致发光器件在彩色平板显示等领域具有极大的应用前景,已引起广泛的关注。与无机物相比,有机发光材料具有高荧光效率、颜色的广泛选择性及易成膜性。本文主要介绍近年来有机分子电致发光材料最新的发展,并特别讨论了齐聚物和含载流子传输单元的发光体。     

Bipolar Host Materials for Organic Light‐Emitting Diodes

It is important to balance holes and electrons in the emitting layer of organic light‐emitting diodes to maximize recombination efficiency and the accompanying external quantum efficiency. Therefore, the host materials of the emitting layer should transport both holes and electrons for the charge balance. From this perspective, bipolar hosts have been popular as the host materials of thermally activated delayed fluorescent devices and phosphorescent organic light‐emitting diodes. In this review, we have summarized recent developments of bipolar hosts and suggested perspectives of host materials for organic light‐emitting diodes.     

Smart Organic Two‐Dimensional Materials Based on a Rational Combination of Non‐covalent Interactions

Rational design of organic 2D (O2D) materials has made some progress, but it is still in its infancy. A class of self‐assembling small molecules is presented that form nano/microscale supramolecular 2D materials in aqueous media. A judicial combination of four different intermolecular interactions forms the basis for the robust formation of these ultrathin assemblies. These assemblies can be programmed to disassemble in response to a specific protein and release its non‐covalently bound guest molecules.     

Novel fluorene/carbazole hybrids with steric bulk as host materials for blue organic electrophosphorescent devices

The problem of self-quenching in organic electrophosphorescence devices has been extensively studied and partially solved by using sterically hindered spacers in phosphorescent dopants. This paper attempts to address this problem by using sterically hindered host materials. Novel fluorene/carbazole hybrids with tert-butyl substitutions, namely 9,9-bis[4-(3,6-di-tert-butylcarbazol-9-yl)phenyl]fluorene (TBCPF) and 9,9-bis[4-(carbazol-9-yl)phenyl]-2,7-di-tert-butylfluorene (CPTBF), have been synthesized and characterized. The compounds exhibit not only high triplet energy (>2.8 eV), but also high glass transition temperature (>160 °C) and thermal stability. The substitution of inert tert-butyl groups to the carbazole/fluorene rings of these host molecules has a remarkable effect on the corresponding properties of the host materials, i.e. enhancing the thermal and electrochemical stability, weakening the intermolecular packing, and tuning the solid-state emission. Blue electrophosphorescent devices with enhanced performance were prepared by utilizing the sterically hindered host materials. The devices based on the four tert-butyl substituted material TBCPF exhibit unusual tolerance of high dopant concentration up to 20% and marked reduction of efficiency roll-off at higher current, indicating significant suppression of self-quenching effect in organic electrophosphorescent devices by the substitution of steric bulks.     

Supramolecular Assemblies for Electronic Materials

This work presents a synergy between organic electronics and supramolecular chemistry, in which a host–guest complex is designed to function as an efficacious electronic material. Specifically, the noncovalent recognition of a fullerene, phenyl-C₆₁-butyric acid methyl ester ( PC₆₁BM ), by an alternating perylene diimide ( P )-bithiophene ( B ) conjugated macrocycle ( PBPB ) results in a greater than five-fold enhancement in electron mobility, relative to the macrocycle alone. Characterization and quantification of the binding of fullerenes by host PBPB is provided alongside evidence for intermolecular electronic communication within the host–guest complexes.     

二维材料范德华间隙的利用

Since their discovery, two-dimensional (2D) materials have attracted significant research attention owing to their excellent and controllable physical and chemical properties. These materials have emerged rapidly as important material system owing to their unique properties such as electricity, optics, quantum properties, and catalytic properties. 2D materials are mostly bonded by strong ionic or covalent bonds within the layers, and the layers are stacked together by van der Waals forces, thereby making it possible to peel off 2D materials with few or single layers. The weak interaction between the layers of 2D materials also enables the use of van der Waals gaps for regulating the electronic structure of the system and further optimizing the material properties. The introduction of guest atoms can significantly change the interlayer spacing of the original material and coupling strength between the layers. Also, interaction between the guest and host atom also has the potential to change the electronic structure of the original material, thereby affecting the material properties. For example, the electron structure of a host can be modified by interlayer guest atoms, and characteristics such as carrier concentration, optical transmittance, conductivity, and band gap can be tuned. Organic cations intercalated between the layers of 2D materials can produce stable superlattices, which have great potential for developing new electronic and optoelectronic devices. This method enables the modulation of the electrical, magnetic, and optical properties of the original materials, thereby establishing a family of 2D materials with widely adjustable electrical and optical properties. It is also possible to introduce some new properties to the 2D materials, such as magnetic properties and catalytic properties, by the intercalation of guest atoms. Interlayer storage, represented by lithium-ion batteries, is also an important application of 2D van der Waals gap utilization in energy storage, which has also attracted significant research attention. Herein, we review the studies conducted in recent years from the following aspects: (1) changing the layer spacing to change the interlayer coupling; (2) introducing the interaction between guest and host atoms to change the physico-chemical properties of raw materials; (3) introducing the guest substances to obtain new properties; and (4) interlayer energy storage. We systematically describe various interlayer optimization methods of 2D van der Waals gaps and their effects on the physical and chemical properties of synthetic materials, and suggest the direction of further development and utilization of 2D van der Waals gaps.