Alkyl carbon-nitrogen reductive elimination from platinum(IV)-sulfonamide complexes

Platinum(IV) complexes containing monodentate sulfonamide ligands, fac-(dppbz)PtMe(3)(NHSO(2)R) (dppbz = o-bis(diphenylphosphino)benzene; R = p-C(6)H(4)(CH2)(3)CH(3) (1a), p-C(6)H(4)CH(3) (1b), CH(3) (1c)), have been synthesized and characterized, and their thermal reactivity has been explored. Compounds 1a-c undergo competitive C-N and C-C reductive elimination upon thermolysis to form N-methylsulfonamides and ethane, respectively. Selectivity for either C-N or C-C bond formation can be achieved by altering the reaction conditions. Good yields of the C-N-coupled products were observed when the thermolyses of 1a-c were conducted in benzene-d(6). In contrast, exclusive C-C reductive elimination occurred upon themolysis of 1a,b in nitrobenzene-d(5). When the thermolyses of 1a were performed in the presence of sulfonamide anion NHSO2R- in benzene-d(6), ethane elimination was completely inhibited and C-N reductive elimination products were formed in high yield. Mechanistic studies support a two-step reaction pathway involving initial dissociation of NHSO(2)R(-) from the platinum center, followed by nucleophilic attack of this anion on a methyl group of the resulting five-coordinate platinum(IV) cation to form MeNHSO(2)R and (dppbz)PtMe(2). C-C reductive elimination to form ethane occurs directly from the five-coordinate Pt(IV) cation.     

Investigation of the mechanism of alkane reductive elimination and skeletal isomerization in Tp'Rh(CNneopentyl)(R)H complexes: the role of alkane complexes

Experiments are described that provide indirect evidence for the involvement of alkane sigma-complexes in oxidative addition/reductive elimination reactions of Tp'Rh(L)(R)H complexes (Tp' = tris-3,5-dimethylpyrazolylborate, L = CNCH(2)CMe(3)). Reductive elimination rates in benzene-d(6) were determined for loss of alkane from Tp'Rh(L)(R)H, where R = methyl, ethyl, propyl, butyl, pentyl, and hexyl, to generate RH and Tp'Rh(L)(C(6)D(5))D. The isopropyl hydride complex Tp'Rh(L)(CHMe(2))H was found to rearrange to the n-propyl hydride complex Tp'Rh(L)(CH(2)CH(2)CH(3))H in an intramolecular reaction. The sec-butyl complex behaves similarly. These same reactions were studied by preparing the corresponding metal deuteride complexes, Tp'Rh(L)(R)D, and the scrambling of the deuterium label into the alpha- and omega-positions of the alkyl group monitored by (2)H NMR spectroscopy. Inverse isotope effects observed in reductive elimination are shown to be the result of an inverse equilibrium isotope effect between the alkyl hydride(deuteride) complex and the sigma-alkane complex. A kinetic model has been proposed using alkane complexes as intermediates and the selectivities available to these alkane complexes have been determined by kinetic modeling of the deuterium scrambling reactions.     

Carbon-carbon bond formation by radical addition-fragmentation reactions of O-alkylated enols

Alpha-tert-butoxystyrene [H2C=C(OBut)Ph] reacts with alpha-bromocarbonyl or alpha-bromosulfonyl compounds [R1R2C(Br)EWG; EWG =-C(O)X or -S(O2)X] to bring about replacement of the bromine atom by the phenacyl group and give R1R2C(EWG)CH2C(O)Ph. These reactions take place in refluxing benzene or cyclohexane with dilauroyl peroxide or azobis(isobutyronitrile) as initiator and proceed by a radical-chain mechanism that involves addition of the relatively electrophilic radical R1R2(EWG)C* to the styrene. This is followed by beta-scission of the derived alpha-tert-butoxybenzylic adduct radical to give But*, which then abstracts bromine from the organic halide to complete the chain. Alpha-1-adamantoxystyrene reacts similarly with R1R2C(Br)EWG, at higher temperature in refluxing octane using di-tert-amyl peroxide as initiator, and gives phenacylation products in generally higher yields than are obtained using alpha-tert-butoxystyrene. Simple iodoalkanes, which afford relatively nucleophilic alkyl radicals, can also be successfully phenacylated using alpha-1-adamantoxystyrene. O-Alkyl O-(tert-butyldimethylsilyl) ketene acetals H2C=C(OR)OTBS, in which R is a secondary or tertiary alkyl group, react in an analogous fashion with organic halides of the type R1R2C(Br)EWG to give the carboxymethylation products R1R2C(EWG)CH2CO2Me, after conversion of the first-formed silyl ester to the corresponding methyl ester. The silyl ketene acetals also undergo radical-chain reactions with electron-poor alkenes to bring about alkylation-carboxymethylation of the latter. For example, phenyl vinyl sulfone reacts with H2C=C(OBut)OTBS to afford ButCH2CH(SO2Ph)CH2CO2Me via an initial silyl ester. In a more complex chain reaction, involving rapid ring opening of the cyclopropyldimethylcarbinyl radical, the ketene acetal H2C=C(OCMe2C3H5-cyclo)OTBS reacts with two molecules of N-methyl- or N-phenyl-maleimide to bring about [3 + 2] annulation of one molecule of the maleimide, and then to link the bicyclic moiety thus formed to the second molecule of the maleimide via an alkylation-carboxymethylation reaction.     

Effect of substituents on the stabilities of multiply-substituted carbon-centered radicals

The bond dissociation energies (BDEs) and radical stabilization energies (RSEs) which result from 166 reactions that lead to carbon-centered radicals of the type ˙CH(2)X, ˙CHXY and ˙CXYZ, where X, Y and Z are any of the fourteen substituents H, F, Cl, NH(2), OH, SH, CH[double bond, length as m-dash]CH(2), C[triple bond, length as m-dash]CH, BH(2), CHO, COOH, CN, CH(3), and CF(3), were calculated using spin-restricted and -unrestricted variants of the double-hybrid B2-PLYP method with the 6-311+G(3df,2p) basis set. The interactions of substituents X, Y, and Z in both the radicals (˙CXYZ) and in the precursor closed-shell molecules (CHXYZ), as well as the extent of additivity of such interactions, were investigated by calculating radical interaction energies (RIEs), molecule interaction energies (MIEs), and deviations from additivity of RSEs (DARSEs) for a set of 152 reactions that lead to di- (˙CHXY) and tri- (˙CXYZ) substituted carbon-centered radicals. The pairwise quantities describing the effects of pairs of substituents in trisubstituted systems, namely pairwise MIEs (PMIEs), pairwise RIEs (PRIEs) and deviations from pairwise additivity of RSEs (DPARSEs), were also calculated for the set of 61 reactions that lead to trisubstituted radicals (˙CXYZ). Both ROB2-PLYP and UB2-PLYP were found to perform quite well in predicting the quantities related to the stabilities of carbon-centered radicals when compared with available experimental data and with the results obtained from the high-level composite method G3X(MP2)-RAD. Particular selections of substituents or combinations of substituents from the current test set were found to lead to specially stable radicals, increasing the RSEs to a maximum of +68.2 kJ mol(-1) for monosubstituted radicals ˙CH(2)X (X = CH[double bond, length as m-dash]CH(2)), +131.7 kJ mol(-1) for disubstituted radicals ˙CHXY (X = NH(2), Y = CHO), and +177.1 kJ mol(-1) for trisubstituted radicals ˙CXYZ (X = NH2, Y = Z = CHO).     

Syntheses of 1-alkyl-1,2,4-triazoles and the formation of quaternary 1-alkyl-4-polyfluoroalkyl-1,2,4-triazolium salts leading to ionic liquids

1,2,4-triazole was alkylated (alkyl = methyl, butyl, heptyl, decyl) at N-1 in >90% isolated yields. The resulting 1-alkyl triazoles were quaternized at N-4 in >98% isolated yields using fluorinated alkyl halides with >98% isolated yields, under neat reaction conditions at 100-120 degrees C to form N1-CH(3)-N4-(CH(2))(2)C(m)F(2)(m)(+ 1)-triazolium (Taz) iodide (m = 1, 6), N1-C(4)H(9)-N4-(CH(2))(2)C(m)F(2)(m)(+ 1)-Taz iodide (m = 1, 4, 6), N1-C(7)H(15)-N4-(CH(2))(2)C(m)F(2)(m)(+ 1)-Taz iodide (m = 1, 4, 6), N1-C(10)H(21)-N4-(CH(2))(2)C(m)F(2)(m)(+1)-Taz iodide (m = 1, 4), and N1-C(n)H(2)(n )(+ 1)-N4-(CH(2))(2)F-Taz bromide (n = 4, 7, 10). Single-crystal X-ray analyses confirmed the structure of [1-CH(3)-4-CH(2)CH(2)CF(3)-Taz](+)I(-). It crystallized in the orthorhombic space group Pccn, and the unit cell dimensions were a = 13.8289(9) A, b = 17.3603(11) A, c = 9.0587(6) A (alpha = beta = gamma = 90 degrees ). Metathesis of these polyfluoroalkyl-substituted triazolium halides with other salts led to the formation of quaternary compounds, some of which comprise ionic liquids, namely, [R(R(f))-Taz](+)Y(-) (Y = NTf(2), BF(4), PF(6), and OTf), in good isolated yields without the need for further purification: N1-CH(3)-N4-(CH(2))(2)C(m)F(2)(m)( +) (1)-Taz Y (m = 1, 6; Y = NTf(2)), N1-C(4)H(9)-N4-(CH(2))(2)C(m)F(2)(m)(+ 1)-Taz Y (m = 1, 4, 6; Y = NTf(2)), N1- C(7)H(15)-N4-(CH(2))(2)C(m)F(2)(m)(+ 1)-Taz Y (m = 1, 4, 6; Y = NTf(2)), N1-C(10)H(21)-N4-(CH(2))(2)C(m)F(2)(m)(+1)-Taz Y (n = 1, 4; Y = NTf(2)), N1-C(n)H(2)(n )(+ 1)-N4-(CH(2))(2)F-Taz Y (n = 7, 10; Y = NTf(2)), N1-C(10)H(21)-N4-(CH(2))(2)F-TazY (Y = OTf), N1-C(7)H(15)-N4-(CH(2))(2)F-TazY (Y = BF(4)), N1-C(4)H(9)-N4-(CH(2))(2)C(m)F(2)(m) (+ 1)-Taz Y (m = 4, 6; Y = PF(6)), N1-C(7)H(15)-N4-(CH(2))(2)C(4)F(9)-Taz Y (Y = PF(6)), N1-C(4)H(9)-N4-(CH(2))(2)C(m)F(2)(m)(+ 1)-Taz Y (m = 4, 6; Y = OTf). All new compounds were characterized by (1)H, (19)F, and (13)C NMR and MS spectra and elemental analyses. T(g)s and T(m)s of ionic liquids were determined by DSC.     

Water-catalyzed O-H insertion/HI elimination reactions of isodihalomethanes (CH2X-I, where X = Cl, Br, I) with water and the dehalogenation of dihalomethanes in water-solvated environments

A combined experimental and theoretical investigation of the ultraviolet photolysis of CH2XI (where X = Cl, Br, I) dihalomethanes in water is presented. Ultraviolet photolysis of low concentrations of CH2XI (where X = Cl, Br, I) in water appears to lead to almost complete conversion into CH2(OH)2 and HX and HI products. Picosecond time-resolved resonance Raman (ps-TR3) spectroscopy experiments revealed that noticeable amounts of CH2X-I isodihalomethane intermediates were formed within several picoseconds after photolysis of the CH2XI parent compound in mixed aqueous solutions. The ps-TR3 experiments in mixed aqueous solutions revealed that the decay of the CH2X-I isodihalomethane intermediates become significantly shorter as the water concentration increases, indicating that the CH2X-I intermediates may be reacting with water. Ab initio calculations found that the CH2X-I intermediates are able to react relatively easily with water via a water-catalyzed O-H insertion/HI elimination reaction to produce CH2X(OH) and HI products, with the barrier for these reactions increasing as X changes from Cl to Br to I. The ab initio calculations also found that the CH2X(OH) product can undergo a water-catalyzed HX elimination reaction to make H2C=O and HX products, with the barrier to reaction decreasing as X changes from Cl to Br to I. The preceding two water-catalyzed reactions produce the HI and HX leaving groups observed experimentally, and the H2C=O product further reacts with water to make the other CH2(OH)2 product observed in the photochemistry experiments. This suggests that that the CH2X-I intermediates react with water to form the CH2(OH)2 and HI and HX products observed in the photochemistry experiments. Ultraviolet photolysis of CH2XI (where X = Cl, Br, I) at low concentrations in water-solvated environments appears to lead to efficient dehalogenation and release of two strong acid leaving groups. We very briefly discuss the potential influence of this photochemistry in water on the decomposition of polyhalomethanes and halomethanols in aqueous environments.     

Base-induced decomposition of alkyl hydroperoxides in the gas phase. Part 3. Kinetics and dynamics in HO- + CH3OOH, C2H5OOH, and tert-C4H9OOH reactions

The E(CO)2 elimination reactions of alkyl hydroperoxides proceed via abstraction of an alpha-hydrogen by a base: X(-) + R(1)R(2)HCOOH --> HX + R(1)R(2)C=O + HO(-). Efficiencies and product distributions for the reactions of the hydroxide anion with methyl, ethyl, and tert-butyl hydroperoxides are studied in the gas phase. On the basis of experiments using three isotopic analogues, HO(-) + CH3OOH, HO(-) + CD3OOH, and H(18)O(-) + CH3OOH, the overall intrinsic reaction efficiency is determined to be 80% or greater. The E(CO)2 decomposition is facile for these methylperoxide reactions, and predominates over competing proton transfer at the hydroperoxide moiety. The CH3CH2OOH reaction displays a similar E(CO)2 reactivity, whereas proton transfer and the formation of HOO(-) are the exclusive pathways observed for (CH3)3COOH, which has no alpha-hydrogen. All results are consistent with the E(CO)2 mechanism, transition state structure, and reaction energy diagrams calculated using the hybrid density functional B3LYP approach. Isotope labeling for HO(-) + CH3OOH also reveals some interaction between H2O and HO(-) within the E(CO)2 product complex [H2O...CH2=O...HO(-)]. There is little evidence, however, for the formation of the most exothermic products H2O + CH2(OH)O(-), which would arise from nucleophilic condensation of CH2=O and HO(-). The results suggest that the product dynamics are not totally statistical but are rather direct after the E(CO)2 transition state. The larger HO(-) + CH3CH2OOH system displays more statistical behavior during complex dissociation.     

Diketo compounds with (trifluoromethyl)trimethylsilane: double nucleophilic trifluoromethylation reactions

Reactions of various diketo compounds with (trifluoromethyl)trimethylsilane (Me3SiCF3) in the presence of catalytic amounts of cesium fluoride have been studied. gamma-Ketoesters, CH3COCH2CH2CO2R (R = Et, Bu), were reacted with 2 equiv of Me3SiCF3 at room temperature to give CH3C(OH)(CF3)CH2CH2COCF3 in good yield after hydrolysis. alpha-Diketones, R1COCOR2 (R1 = R2 = Ph; R1 = Ph, R2 = Me; R1 = R2 = Me; R1 = Me, R2 = Et), when reacted with Me3SiCF3, formed 1:1 or 1:2 addition products depending on the reaction conditions and stoichiometry used. Reactions of diones CH3COXCOCH3 (X = -CH2CH2-, -C6H4C6H4-, -CH2-) with Me3SiCF3 also led to the formation of the mono- or diaddition products depending on reaction conditions. With various kinds of substituted arylglyoxals, 2 equiv of Me3SiCF3 produced monoaddition products in 70-75% yield and diaddition products in 5-10% yield. One of the monoalcohols and two of the diols have been characterized by single-crystal X-ray analysis, and the presence of inter- and intramolecular hydrogen bonding has been confirmed.     

Elimination of HX (X = Cl,Br) from haloalkenes on the Ru2Q2 (Q = S,Se) core complex

Treatment of [[Ru(P(OCH3)3)2(CH3CN)3]2(mu-Q2)](CF3SO3)4 (1, Q = S; 2, Q = Se) with haloalkenes resulted in the formation of complexes carrying unsaturated C3Q2 five-membered or C4Q2 six-membered rings via elimination of HX (X = Cl, Br). The reactions of 1 and 2 with allyl bromide gave the corresponding addition products, [[Ru(P(OCH3)3)2(CH3CN)3]2(mu-QCH=CHCH2Q)](CF3SO3)4 (3, Q = S; 4, Q = Se), via elimination of HBr. The elimination process seems to be thermodynamically controlled and takes place at the final stage of the reaction. The steric effect of the halogen atoms seems more operative than the electronic one.     

过渡金属氢化物和聚集双键化合物反应的研究——Ⅴ.Cp_2MH_2(M=Zr,Hf)与RNCS(R=n-Bu,c-C_6H_(11),C_6H_5,2-C_(10)H_7)、CS_2的反应

本文研究了Cp_2ZrH_2与CS_2、RNCS(R=n-Bu,c-C_6H_11,C_6H_5,2-C_(10)H_7)和Cp_2HfH_2与c-C_6H_(11)NCS的反应,探讨了在这类新型脱硫反应中锆氢与铪氢配合物化学反应性能上的差异.从以上反应中分别得到两个硫桥同核双金属配合物(Cp_2MS)_2(1,M=Zr;2,M=Hf)和有机铪配合物Cp_2Hf[SC(H)NR]_2(3,R=c-C_6H_(11)).产物结构由元素分析、IR、~1H和~(13)C NMR及MS谱分析鉴定,产物1的晶体结构由X光四圆衍射方法测定,有机产物X=CH_2和CH_3X(H)(X=S,NR)由GC-MS谱分析测定.     

低价钛还原环化δ-酮腈成环戊酮

四氯化钛-锌粉还原环化δ-酮腈是合成环戊酮的一种简便方法。在同样条件下, 由4-甲基-4-乙酰基庚二腈得到1,5-二甲基双环-[3.3.0]-2,8-辛二酮。     

由有机钟盐简便合成不饱和醛、酮、酰胺以及有关天然产物(英文)

本文报道有机鉮盐和各种不同的醛在固-液相转移条件下,以碳酸钾为碱,简便合成共轭不饱和醛、共轭不饱和酮以及共轭不饱和酰胺。其反应通式如下:(?)n=O,1;m=0,1 and(?)X=CHO,COCH_3,CONR~1R_2当m=0时,产物几乎全部是2E 或2E,4E 产物,当m=1时,2E,4E 或2E,4E,6E 产物为主,Z 构型产物在催化量碘作用下易异构化成 E 构型产物。以此合成方法,还合成了一些具有生物活性的天然产物。该合成方法操作简便,反应条件温和,产物高度立体选择性,产率优良,这为多烯醛,多烯酮,多烯酰胺以及有关天然产物的合成提供了实用途径。     

Carbon-silicon and carbon-carbon bond formation by elimination reactions at metal N-heterocyclic carbene complexes

Two functional groups can be delivered at once to organo-rare earth complexes, (L)MR(2) and (L)(2)MR (M = Sc, Y; L = ({1-C(NDippCH(2)CH(2)N)}CH(2)CMe(2)O), Dipp = 2,6-(i)Pr(2)-C(6)H(3); R = CH(2)SiMe(3), CH(2)CMe(3)), via the addition of E-X across the metal-carbene bond to form a zwitterionic imidazolinium-metal complex, (L(E))MR(2)X, where L(E) = {1-EC(NDippCH(2)CH(2)N)}CH(2)CMe(2)O, E is a p-block functional group such as SiR(3), PR(2), or SnR(3), and X is a halide. The "ate" complex (L(Li))ScR(3) is readily accessible and is best described as a Li carbene adduct, ({1-Li(THF)C(NDippCH(2)CH(2)N)}CH(2)CMe(2)O)Sc(CH(2)SiMe(3))(3), since structural characterization shows the alkoxide ligand bridging the two metals and the carbene Li-bound with the shortest yet recorded Li-C bond distance. This can be converted via lithium halide-eliminating salt metathesis reactions to alkylated or silylated imidazolinium derivatives, (L(E))ScR(3) (E = SiMe(3) or CPh(3)). All the E-functionalized imidazolinium complexes spontaneously eliminate functionalized hydrocarbyl compounds upon warming to room temperature or slightly above, forming new organic products ER, i.e., forming C-Si, C-P, and C-Sn bonds, and re-forming the inorganic metal carbene (L)MR(X) or (L)(2)MX complex, respectively. Warming the tris(alkyl) complexes (L(E))MR(3) forms organic products arising from C-C or C-Si bond formation, which appears to proceed via the same elimination route. Treatment of (L)(2)Sc(CH(2)SiMe(3)) with iodopentafluorobenzene results in the "reverse sense" addition, which upon thermolysis forms the metal aryl complex (L)(2)Sc(C(6)F(5)) and releases the iodoalkane Me(3)SiCH(2)I, again facilitated by the reversible functionalization of the N-heterocyclic carbene group in these tethered systems.     

Facile allylic C-H bond activation on the bridging disulfide ligand in the Ru(III) dinuclear complex having a conjugated RuSSRu core

Treatment of [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)(mu-S(2))](CF(3)SO(3))(4) (1), which is prepared by the reaction of [[RuCl(P(OCH(3))(3))(2)](2)(mu-S(2))(mu-Cl)(2)] (2) with 4 equiv of AgCF(3)SO(3), with terminal alkenes such as 1-pentene, allyl ethyl ether, allyl phenyl ether, 1,4-hexadiene, and 3-methyl-1-butene, resulted in the formation of complexes carrying a C(3)S(2) five-membered ring, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCH(2)CH(2)CR(1)R(2)S]](CF(3)SO(3))(4) (3, R(1) = CH(2)CH(3), R(2) = H, 40%; 4, R(1) = OCH(2)CH(3), R(2) = H, 60%; 5, R(1) = OC(6)H(5), R(2) = H, 73%; 6, R(1) = CH=CHCH(3), R(2) = H, 48%; 7, R(1) = R(2) = CH(3), 40%). Reaction of 1 with methylenecycloalkanes was found to give several different types of products, depending on the ring size of the substrates. A trace of [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCH(CH(2)CH(2))CH(CH(3))S]](CF(3)SO(3))(4) (9) having a C(2)S(2) four-membered ring to bridge the two Ru atoms was obtained by the reaction of 1 with methylenecyclobutane, whereas the reaction with methylenecyclohexane gave [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-S(CH(2)(C=CHCH(2)CH(2)CH(2)CH(2))S)](CF(3)SO(3))(3) (10) in 69% yield via C-S bond formation and elimination of a proton. Throughout these reactions with alkenes giving a variety of products, the activation of the allylic C-H bond is always the essential and initial key step.     

A crossed molecular beam study on the formation of hexenediynyl radicals (H(2)CCCCCCH; C(6)H(3) (X(2)A')) via reactions of tricarbon molecules, C(3)(X(1)Sigma(g)(+)), with allene (H(2)CCCH(2); X(1)A(1)) and methylacetylene (CH(3)CCH; X(1)A(1))

Crossed molecular beams experiments have been utilized to investigate the reaction dynamics between two closed shell species, i.e. the reactions of tricarbon molecules, C(3)(X(1)Sigma(g)(+)), with allene (H(2)CCCH(2); X(1)A(1)), and with methylacetylene (CH(3)CCH; X(1)A(1)). Our investigations indicated that both these reactions featured characteristic threshold energies of 40-50 kJ mol(-1). The reaction dynamics are indirect and suggested the reactions proceeded via an initial addition of the tricarbon molecule to the unsaturated hydrocarbon molecules forming initially cyclic reaction intermediates of the generic formula C(6)H(4). The cyclic intermediates isomerize to yield eventually the acyclic isomers CH(3)CCCCCH (methylacetylene reaction) and H(2)CCCCCCH(2) (allene reaction). Both structures decompose via atomic hydrogen elimination to form the 1-hexene-3,4-diynyl-2 radical (C(6)H(3); H(2)CCCCCCH). Future flame studies utilizing the Advanced Light Source should therefore investigate the existence of 1-hexene-3,4-diynyl-2 radicals in high temperature methylacetylene and allene flames. Since the corresponding C(3)H(3), C(4)H(3), and C(5)H(3) radicals have been identified via their ionization potentials in combustion flames, the existence of the C(6)H(3) isomer 1-hexene-3,4-diynyl-2 can be predicted as well.     

Aromatic nucleophilic substitution (S<Subscript>N</Subscript>Ar) Reactions of 1,2- and 1,4-halonitrobenzenes and 1,4-dinitrobenzene with carbanions in the gas phase

In the gas-phase reactions of halonitro- and dinitrophenide anions with X (X = F, Cl, Br, NO(2)) and NO(2) groups in ortho or para position to each other with selected C-H acids: CH(3)CN, CH(3)COCH(3), and CH(3)NO(2), products of the S(N)Ar-type reaction are formed. Nitrophenide anions are generated by decarboxylation of the respective nitrobenzenecarboxylate anions in ESI ion source and the S(N)Ar reaction takes place either in the medium-pressure zone of the ion source or in the collision chamber of the triple quadrupole mass spectrometer. In the case of F, Cl, and NO(2) derivatives, the main ionic product is the respective [NO(2)-Ph-CHR](-) anion (R = CN, COCH(3), NO(2)). In the case of Br derivatives, the main ionic product is Br(-) ion because it has lower proton affinity than the [NO(2)-Ph-CHR](-) anion (for R = CN, COCH(3)). For some halonitrophenide anion C-H acid pairs of reactants, the S(N)Ar reaction is competed by the formation of halophenolate anions. This reaction can be rationalized by the single electron-transfer mechanism or by homolytic C-H bond cleavage in the proton-bound complex, both resulting in the formation of the halonitrobenzene radical anion, which in turn undergoes -NO(2) to -ONO rearrangement followed by the NO(.) elimination.     

C-H cleavage and double alkyl additions to the disulfido ligand in dicyanido-bridged Ru2S2 complexes

Novel dicyanido-bridged dicationic RuIIISSRuIII complexes [{Ru(P(OCH3)3)2}2(mu-S2)(mu-X)2{mu-m-C6H4(CH2CN)2}](CF3SO3)2 (4, X=Cl, Br) were synthesized by the abstraction of the two terminal halide ions of [{RuX(P(OCH3)3)2}2(mu-S2)(mu-X)2] (1, X=Cl, Br) followed by treatment with m-xylylenedicyanide. 4 reacted with 2,3-dimethylbutadiene to give the C4S2 ring-bridged complex [{Ru(P(OCH3)3)2}2{mu-SCH2C(CH3)=C(CH3)CH2S}(mu-X)2{mu-m-C6H4(CH2CN)2}](CF3SO3)2 (6, X=Cl, Br). In addition, 4 reacted with 1-alkenes in CH3OH to give alkenyl disulfide complexes [{Ru(P(OCH3)3)2}2{mu-SS(CH2C=CHR)}(mu-Cl)2{mu-m-C6H4(CH2CN)2}](CF3SO3) (7: R=CH2CH3, 9: R=CH2CH2CH3) and alkenyl methyl disulfide complexes [{Ru(P(OCH3)3)2}2{mu-S(CH3)S(CH2C=HR)}(mu-Cl)2{mu-m-C6H4(CH2CN)2}](CF3SO3)2 (8: R=CH2CH3, 10: R=CH2CH2CH3) via the activation of an allylic C-H bond followed by the elimination of H+ or condensation with CH3OH. Additionally, the reaction of 4 with 3-penten-1-ol gave [{Ru(P(OCH3)3)2}2{mu-SS(CH2C=CHCH2OH)}(mu-Cl)2{mu-m-C6H4(CH2CN)2}](CF3SO3) (11) via the elimination of H+ and [{Ru(P(OCH3)3)2}2(mu-SCH2CH=CHCH2S)(mu-Cl)2{mu-m-C6H4(CH2CN)2}](CF3SO3)2 (12) via the intramolecular elimination of a H2O molecule. 12 was exclusively obtained from the reaction of 4 with 4-bromo-1-butene.     

5-Organyl-5-phosphaspiro[4.4]nonanes: a contribution to the structural chemistry of spirocyclic tetraalkylphosphonium salts and pentaalkylphosphoranes

Spirocyclic phosphonium salts of the type [(CH(2))(4)P(CH(2))(4)](+) X(-) with X = I(3) (1a), I (1b), picrate (1c), benzoate (1d), and Cl (1e) were prepared from 1,4-diiodobutane and elemental phosphorus followed by metathesis reactions. The crystal structures of 1b and 1c and of 1d(H(2)O) have been determined by X-ray diffraction methods. In the cations of these salts the phosphorus atoms are shared by two five-membered rings in envelop conformations. In the picrate 1c the cations show an unsymmetrical ring folding pattern (point group C(1)), while the geometry of the cations of the iodide 1b and the benzoate hydrate [1d(H(2)O)] approaches the symmetry of point group C(2). These structures can be taken as models for the as yet unknown molecular geometries of the corresponding hydrocarbon (CH(2))(4)C(CH(2))(4) and silane (CH(2))(4)Si(CH(2))(4). Treatment of 1e with organolithium reagents RLi affords spirocyclic pentaorganophosphoranes RP[(CH(2))(4)](2) with R = Me, Et, n-Bu, Vi, and Ph (2a-e) in good (R = Me, Et, n-Bu) to low yields (R = Vi, Ph). The products are isolated as colorless liquids, of which only 2a, 2b, and 2d can be distilled without decomposition. Single crystals of 2a were obtained by low-temperature in situ crystal growth. The molecule has a trigonal bipyramidal configuration with the methyl group in an equatorial position and the two five-membered rings spanning axial/equatorial positions of the polyhedron. Deviations from the standard trigonal bipyramidal geometry are small. The compounds 2a-e are fluctional in solution as demonstrated by NMR spectroscopy.     

分子内氮原子上亲核取代反应的理论研究

Using the -CHR-(CH2)3-NFCH3(R=H, CH3, CH2CF3, CHO, COCH3) as the computational model, the two possible intramolecular reactions, nucleophilic substitution on nitrogen and elimination reaction, were studied at the theoretical level of MP2(full)/6-31+G(d,p). The results indicate that the elimination mechanism, when the -CHR radical is more basic (R=H, CH3, CH2CF3) leading to linear products R-CH2-(CH2)3N=CH2 is preferred. In contrast, electro-withdrawing groups CHO and COCH3 on the attacking site will favor the intramolecular nucleophilic substitution of nitrogen and form 5-membered heterocyclic compounds. These theoretical predictions agree with the available experiments.