Synthesis and luminescent properties of PEO/lanthanide oxide nanoparticle hybrid films

In this study, we investigate the optical properties of lanthanide oxide nanoparticles dispersed in poly(ethylene oxide) (PEO) network as thermally stable polymeric films. The aim of this work is both to keep a good optical transparency in the visible domain and to obtain luminescent materials after incorporation of nanoparticles. For this purpose, we develop luminescent nanocrystals of oxides containing terbium ion as a doping element in Gd₂O₃. These sub-5-nm lanthanide oxides nanoparticles have been prepared by direct oxide precipitation in high-boiling polyalcohol solutions and characterized by luminescence spectroscopy. PEO/lanthanide oxide nanohybrid films are prepared by radical polymerization of poly(ethylene glycol) methacrylate after introduction of lanthanide oxide particles.As a first result; the obtained films present interesting luminescence properties with a very low lanthanide oxide content (up to 0.29 wt%). Furthermore, these films are still transparent and keep their original mechanical properties.Prior to describe the specific applications to optical use, we report here the dynamic mechanical analysis (DMA), X-ray diffraction (XRD) analysis, transmission electron microscopy (TEM), and luminescent properties of. nanohybrid films.     

Optical properties of poly(methyl methacrylate)–titania nanostructure thin films containing ellipsoid-shaped titania nanoparticles from ex-situ sol-gel method at low growth temperature

This paper reports on the linear and nonlinear optical responses of the PMMA-TiO₂ nanohybrid thin films which are synthesized by a flexible ex-situ sol-gel/polymerization process, assisted by spin coating and multi-step baking. Triethanolamine (TEOA) as surfactant and shape controller is used to modify the interface between PMMA and TiO₂, allowing a highly homogeneous dispersion of the ellipsoid-shaped TiO₂ nanoparticles. The resulting nanohybrid thin films have highly optical transparency as proved by the linear absorption photon-energy spectra and indicate an enhanced nonlinear optical (NLO) response as confirmed by the Z-scan technique using 800-nm, 120-femtosecond (fs) laser pulses, highlighting the potential of the nanocomposites for efficient optical devices.     

Optimal design for extending the lifetime of thin film luminescent solar concentrators

This study is concerned with the enhancement of the molecular, weathering stability of two models of thin film luminescent solar concentrators (LSCs). Two model systems of thin film LSCs had been proposed; the first model consists of a transparent PMMA/SiO₂ nanohybrid layer coated on a coumarin doped PMMA substrate. The second model designed as the ordinary configuration in which coumarin dye is dissolved in PMMA/SiO₂ nanohybrid layer then coated on a transparent PMMA substrate. The effect of nanosilica concentration on the prepared models was studied by TEM, SEM, DSC, FT-IR, UV–vis absorption and indoor photodegradation test. The obtained results suggested the first model for a durable design of thin film LSC applications specially in hot regions.     

HLDPE/organic functionalized SiO2 nanocomposites with improved thermal stability and mechanical properties

High-pressure low-density polyethylene (HLDPE)/organic functionalized SiO₂ nanocomposites were synthesized using melt-blending technique in a sigma internal mixer. The properties of the nanocomposites were studied using two different organic functional modifiers: diglycidyl ether of bisphenol-A (DGEBA) and triacetoxyvinylsilane. Reinforcing, thermal stability and toughening effects of organic functionalized nanosilica on the polymer matrix were found at loading of 2.5% nanosilica functionalized with 2.8% of DGEBA and silane coupling agent respectively. Organic functionalization on the nanosilica particle surface led to different microstructures when compared with that of the pure polymer. Organic functionalization on the nanosilica particle surface produced good interfacial adhesion and homogeneous dispersion in the polymer matrix, while the use of nanosilica resulted in aggregated silica particles in the polymer matrix. There was no significant improvement in thermal stability and mechanical properties when only nanosilica was added to the pure polymer. On the contrary, the addition of pretreated nanosilica with organic functional modifiers led to an increase of thermal stability from 313–363°C, elastic modulus and toughness from 0.12–0.18 GPa and 3.23–9.81 MJ/m³ respectively.     

甲基蓝-钛酸盐纳米聚合物薄膜的光谱和光学非线性研究

 为了满足光学非线性器件设备对工作材料的要求,探究具有高阶非线性效应的固态薄膜材料的制备方法,并对其光学特性进行表征,采用化学插入法,将甲基蓝染料分子插入到具有纳米量级的层状钛酸盐片间,制备了甲基蓝-钛酸盐纳米聚合物薄膜,通过吸收光谱和荧光光谱的测定,发现薄膜的吸收峰相对于染料溶液发生了明显的蓝移,表明染料分子在纳米片间是H-聚集排列。进一步应用单光束连续He-Ne激光Z-扫描技术研究了样品的非线性光学特性,结果显示：插入染料分子的钛酸盐纳米MB/HTO聚合物薄膜具有“负”的非线性折射率,在低功率连续激光作用下聚合物薄膜的非线性折射率系数n2的量级为10-10 m2/W。     

Inhomogeneous SiO<Subscript>x</Subscript>〈Fe〉 metal-dielectric films as a material for infrared thermal radiation detectors

A vacuum deposition method for producing SiO_x〈Fe〉 composite metal-dielectric films in which the metal concentration in the SiO_x dielectric matrix varies across thickness is described. The reflection and transmission of the films in the 2–12 μm IR spectral range are studied and their optical properties are simulated. In the temperature range 283–390 K, the temperature-sensitive properties of the SiO_x〈Fe〉 films with a phase volume ratio of 23% (Fe): 77% (SiO) is investigated. For these films, the temperature coefficient of resistance is found. The feasibility of these films as a sensitive layer in microbolometers is demonstrated.     

纳米ZnO和ZnO-SiO2复合薄膜的光学性质研究

通过溶胶凝胶(sol-gel)法分别在玻璃衬底上制备了ZnO纳米薄膜和ZnO-SiO₂纳米复合薄膜,并利用紫外-可见光分光光度计对薄膜的光学性能进行了分析.可见光-紫外透射谱显示,随着ZnO溶胶浓度从0.7mol/L降低到0.006mol/L,制备的ZnO薄膜从只出现一个380nm(对应的光学禁带宽度为3.27eV)左右的吸收边到在380和320nm(对应的光学禁带宽度为3.76eV)左右各出现一个吸收边,并且随着ZnO溶胶浓度的降低,在380—320nm波段内的透过率明显提高.而Z 关键词： 纳米ZnO 2复合薄膜')" href="#">ZnO-SiO₂复合薄膜 溶胶凝胶法 透射率     

Preparation and the optical nonlinearity of surface chemistry improved titania nanoparticles in poly(methyl methacrylate)-titania hybrid thin films

With 800-nm, 120-fs laser pulses, optical nonlinearity has been studied in a series of thin films containing poly(methyl methacrylate) (PMMA), filled with surfactant acetylacetone (Acac) capped TiO₂ nanoparticles, which were synthesized by a simple in situ sol-gel/polymerization process, assisted by spin coating and multi-step baking. The resulting nanohybrid thin films have highly optical transparency and demonstrate a unique nonlinear optical (NLO) response. The highest nonlinear refractive index (n₂) is observed up to 6.55 × 10⁻² cm² GW⁻¹ in the nanohybrid thin film of 60 wt% Ti(OBu)₄ in PMMA, with a negligible two-photon absorption (TPA), as confirmed by the Z-scan technique. The titanium precursor loading combined with the nature of the capping molecules are used to influence the ability of nanoparticles to nonlinear optical response. Indeed, the ligands at the nanoparticles’ surface can not only control the extent of the interaction between the organic molecules and the embedded nanoparticles but also influence the optical nonlinearities of nanoparticles.     

Photopatternable and refractive-index-tunable sol–gel-derived silica–titania nanohybrid materials

Silica–titania nanohybrid materials were synthesized using functionalized organosilanes and organically chelated titanium alkoxide in a simple sol–gel process. The synthesized silica–titania nanohybrid materials exhibited good solution processability and homogeneous dispersion without any phase separation regardless of the ratio of the mixture of the two components. The silica–titania nanohybrid materials exhibited good photoinitiator solubility and effective photocurability with a high degree of degree under ultraviolet (UV) exposure. Because of their high photocurability and solution processability, the silica–titania nanohybrid materials were readily converted into silica–titania nanohybrid films and were used for direct photopatterning without requiring the developing process used in the photomask method. In particular, the refractive indices of the silica–titania nanohybrid materials could be decreased by decreasing the content of chelated titanium alkoxide in the materials. Moreover, the silica–titania nanohybrid films exhibited high transmittance in the visible wavelength range, and their surface roughnesses were very smooth, exhibiting values <1 nm. On the basis of these observations, the fabricated silica–titania nanohybrid materials can be used in solution-processable materials for producing optical and electro-optical elements.     

Magnetooptical properties of Co-SiO<Subscript>2</Subscript> granular films

The structural, optical, and magnetooptical properties of Co-SiO₂ granular films are studied. It is found that the magnetooptical response is considerably enhanced in samples with a metal component concentration close to the percolation threshold. The Co nanogranules formed in the SiO₂ matrix exhibit ferromagnetic properties and are ordered into the fcc structure, which is confirmed by magnetooptical investigations. The magnetooptical properties of nanocomposites are simulated in the effective-medium approximation. It is shown that the singularities found in the magnetooptical spectra are related to the excitation of plasmon resonances in granular films.     

An ellipsometric investigation of Ag/SiO$\mathsf{_2}$ nanocomposite thin films

Dielectric properties of silver/SiO₂ nanocomposite thin films grown by high-pressure d.c. sputtering technique were studied by spectroscopic ellipsometry (300-800 nm). The dielectric behavior of the nanocomposite thin films largely depended on the particle size, its number density and the surrounding environments. The films showed semiconductor-like behavior up to a critical particle size and concentration, beyond which the films exhibited the typical surface plasmon resonance characteristics in their optical properties. The refractive index was also found to have a strong dependence on the particle size and its dispersion in the matrix. The results were found to be consistent with those obtained from UV-VIS optical absorbance data. Bruggeman effective medium theory was used to explain the experimental results.Received: 3 April 2002, Published online: 23 July 2003PACS:   78.67.-n Optical properties of nanoscale materials and structures - 78.67.Bf Nanocrystals and nanoparticles     

Nonisothermal Crystallization Kinetics of Poly(lactic acid)/Nanosilica Composites

Poly(lactic acid) (PLA)/nanosilica composites were prepared by blending the PLA and nanosilica in chloroform and then evaporating the solvent to form the composite films in a dish. The Ozawa and Mo equations were used to characterize the nonisothermal cold crystallization kinetics of the PLA/nanosilica composites. The results indicated that the Ozawa equation was not successful while the Mo equation was successful to describe the nonisothermal crystallization kinetics of PLA/nanosilica composites. The values of crystallization activation energy (E _c) of the samples were calculated by the Kissinger method. Although the sample crystallization rates were enhanced with the increase of nanosilica content, the samples exhibited increased E _c in the presence of nanosilica. The results showed that nanosilica had an effect on both the nucleation and the crystal growth of PLA, promoting the nucleation but interfering with the molecular motion of PLA in the crystallization process.     

Optical, structural and adsorption properties of zinc peroxide/hydrogel nanohybrid films

Hybrid nanofilms from zinc-peroxide/poly(acrylamide) (ZnO₂/PAAm) and zinc-peroxide/poly(N-isopropyl-acrylamide) (ZnO₂/PNIPAAm) were prepared using the photopolymerization procedure. The thin layers were prepared by the combination of the Layer-by-Layer (LbL) self-assembly method and photopolymerization using UV light in every step of the procedure. The hybrid multilayer films consisting of layers of zinc peroxide nanoparticles and hydrogel alternating in a sandwich-like fashion with thicknesses of 65-246 nm. The chemical structures of the hybrid films were investigated by FTIR spectroscopy, their morphology was studied by atomic force microscopy (AFM). The build up of the films was studied by measuring the optical reflection spectrum, and we have calculated the refractive index and layer thickness of the hybrid layers using simulating software. The adsorption properties of the ZnO₂/hydrogel nanohybrid composite networks were investigated by measuring water and ethanol vapour adsorption by a quartz crystal microbalance (QCM). It was established that on partially hydrophobic ZnO₂/PNIPAAm hybrids the adsorbed amounts were lower, against the hydrophilic ZnO₂/PAAm film the vapour amount was higher. These results correspond to those of the bulk gel swelling results.     

Influence of Hf doping concentration on microstructure and optical properties of HfxZn1−xO thin films

Hf_xZn_1−xO thin films (x=3, 7, 10 and 15 mol%) were deposited on Si (1 0 0) using pulsed laser deposition. The influence of the Hf concentration on the microstructure and optical properties of the films was studied. It is found that Hf ions can be effectively doped into ZnO and all films crystallize in the hexagonal wurtzite structure with a preferred c-axis orientation. The lattice constants of Hf_xZn_1−xO films increase with the Hf contents. Two ultraviolet peaks centered at about 364 and 380 nm coexist in the fluorescent spectra. With increasing the Hf contents, the intensity of fluorescent peaks enhances remarkably. At the same time the energy gaps gradually increase, while the positions of ultraviolet peaks remain unchanged. The mechanism of luminescent emission for Hf_xZn_1−xO films was discussed.     

Optical properties of zinc peroxide and zinc oxide multilayer nanohybrid films

Zinc peroxide and zinc oxide nanoparticles were prepared and self-assembled hybrid nanolayers were built up using layer-by-layer (LbL) technique on the surface of glass substrate using the layer silicate hectorite and an anionic polyelectrolyte, sodium polystyrene sulfonate (PSS). Light absorption, interference and morphological properties of the hybrid films were studied to determine their thickness and refractive index. The influence of layer silicates and polymers on the self-organizing properties of ZnO₂ and ZnO nanoparticles was examined. X-ray diffraction revealed that ZnO₂ powders decomposed to ZnO (zincite phase) at relatively low temperatures (less than 200 °C). The optical thickness of the films ranged from 190 to 750 nm and increased linearly with the number of layers. Band gap energies of the ZnO₂/hectorite films were independent from the layer thickness and were larger than that of pure ZnO₂ nanodispersion. Decomposition of ZnO₂ to ZnO and O₂ at 400 °C resulted in the decrease of the band gap energy from 3.75 to 3.3 eV. Concomitantly, the refractive index increased in correlation with the formation of the zincite ZnO phase. In contrast, the band gap energies of the ZnO₂/PSS hybrid films decreased with the thickness of the nanohybrid layers. We ascribe this phenomenon to the steric stabilization of primary ZnO₂ particles present in the confined space between adjacent layers of hectorite sheets.     

Synthesis and characterisations of Au-nanoparticle-doped TiO2 and CdO thin films

In the present study, pure and gold nanoparticle (Au NP)-doped titanium dioxide (TiO₂) and cadmium oxide (CdO) thin film were prepared by the sol–gel method, and the effect of Au NP doping on the optical, structural and morphological properties of these thin films was investigated. The prepared thin films were characterised by X-ray diffraction (XRD), scanning electron microscopy (SEM) and ultraviolet–visible–near infrared (UV–Vis–NIR) spectra. While the optical band increases from 3.62 to 3.73 for TiO₂ thin films, it decreases from 2.20 to 1.55 for CdO thin films with increasing Au doping concentration. Analysis of XRD indicates that the intensities of peaks of the crystalline phase have increased with the increasing Au NP concentrations in all thin films. SEM images demonstrate that the surface morphologies of the samples were affected by the incorporation of Au NPs. Consequently, the most significant results of the present study are that the Au NPs can be used to modify the optical, structural and morphological properties of TiO₂ and CdO thin films.     

脉冲激光沉积Ag:BaTiO3纳米复合薄膜及其光学特性

在MgO(100)基片上利用脉冲激光沉积技术制备了掺有Ag纳米颗粒的BaTiO₃复合薄膜.通过X射线衍射对薄膜的结构进行了表征,利用透射电子显微镜对Ag纳米颗粒的尺寸、形态进行了观测,X射线光电子能谱结果表明Ag呈金属态.在410—500nm范围内观测到了Ag纳米颗粒引起的等离子振荡峰,随着后处理温度和Ag颗粒浓度的增加,吸收峰发生红移,并出现了双峰现象. 关键词： 金属纳米复合薄膜 激光沉积 光吸收     

Influence of porous morphology on optical dispersion properties of template free mesoporous titanium dioxide (TiO2) films

This paper focuses the influence of porous morphology on the microstructure and optical properties of TiO₂ films prepared by different sol concentration and calcination temperatures. Mesoporous TiO₂ thin films were prepared on the glass substrates by sol-gel dip coating technique using titanium (IV) isopropoxide. Porous morphology of the films can be regulated by chemical kinetics and is studied by scanning electron microscopy. The optical dispersion parameters such as refractive index (n), oscillator energy (E_d), and particle co-ordination number (N_c) of the mesoporous TiO₂ films were studied using Swanepoel and Wemple-DiDomenico single oscillator models. The higher precursor concentration (0.06 M), films exhibit high porosity and refractive index, which are modified under calcination treatment. Calcinated films of low metal precursor concentration (0.03 M) possess higher particle co-ordination number (N_c = 5.05) than that of 0.06 M films (N_c = 4.90) due to calcination at 400 °C. The lattice dielectric constant (E_∞) of mesoporous TiO₂ films was determined by using Spintzer model. Urbach energy of the mesoporous films has been estimated for both concentration and the analysis revealed the strong dependence of Urbach energy on porous morphology. The influence of porous morphology on the optical dispersion properties also has been explained briefly in this paper.     

Sonochemical Synthesis of Optically Tuneable Conjugated Polymer Nanoparticles

The development of novel and simple methodologies for the obtaining of semiconductive polymer nanoparticles with fine‐tuned optical properties represents nowadays a challenging research area as it involves a simultaneous chemical modification and nanostructuration of the polymer. Here, starting from poly[2‐methoxy‐5‐(2‐ethylhexyloxy)‐1,4‐phenylenevinylene], this objective is achieved with the one‐pot synthesis of oligomers with tunable conjugation length and their nanostructuration, employing a miniemulsion method. Ultrasound irradiation of heterogeneous mixtures leads to the formation of hypochlorous acid that disrupts the electronic conjugation through polymer chain cleavage. Moreover, control over the degree of the electronic conjugation of the oligomers, and therefore of the optical properties, is achieved simply by varying the polymer concentration of the initial solution. Finally, the presence of surfactants during the sonication allows for the formation of nanoparticles with progressive spectral shift of the main absorption (from λ_max = 476 to 306 nm) and emission bands (from λ_max = 597 to 481 nm). The integration of conducting polymer nanoparticles into polymeric matrices yields self‐standing and flexible fluorescent films.     

Effects of Cr doping on physical properties of amorphous In-Ga-Zn-O films

Amorphous thin films of InGaZnO₄ (a-IGZO) doped with Cr have been fabricated by using pulsed-laser deposition (PLD). The electrical, optical and magnetic properties of Cr-doped a-IGZO films grown at 25 °C and 150 °C were investigated. The conductivity, optical transmission and band gap of films are remarkably enhanced by increasing the growth temperature. Conductivity, carrier concentration and mobility decrease with increasing the Cr content. However, the optical transmission and band gap are not significantly affected by Cr doping. Moreover, all Cr-doped films exhibit room-temperature ferromagnetism.