苯乙烯-2-乙烯基吡啶两嵌段共聚物的合成与表征

采用阴离子聚合技术合成了一系列苯乙烯 ２ 乙烯基吡啶的两嵌段共聚物（ＰＳ ｂ Ｐ２ＶＰ），并采用ＧＰＣ、ＦＴＩＲ、ＮＭＲ（１Ｈ ＮＭＲ和１３Ｃ ＮＭＲ）、ＤＭＡ等手段进行了表征．结果表明，产物为高分子量、窄分布的两嵌段共聚物，具有微相分离的两相结构     

单茂钛催化剂用于苯乙烯-乙烯嵌段共聚物的合成与表征

乙烯（Ｅ）与苯乙烯（Ｓ）的嵌段共聚合用自制的两种催化剂———茂基三呋喃甲氧基钛［ＣｐＴｉ（ＯＣＨ２Ｏ）３］和茂基三苄氧基钛［ＣｐＴｉ（ＯＣＨ２Ｐｈ）３］进行了研究．考察了促进剂三甲基铝（ＴＭＡ）及乙烯的预聚合时间对聚合结果的影响，发现不同的催化体系有不同的［ＴＭＡ］最佳值以及随着乙烯预聚合时间的延长总的催化效率降低．对嵌段共聚合产物用丁酮、四氢呋喃和氯仿连续萃取分离，得到四氢呋喃中的可溶级分即嵌段共聚物ＰＥ ｂ ｓＰＳ，它占总嵌段共聚合产物的４０ｗｔ％～６０ｗｔ％．对嵌段共聚物用ＤＳＣ、ＷＡＸＤ、ＦＴＩＲ和１３Ｃ ＮＭＲ等方法进行了表征．     

聚乙二醇-聚二氧六环酮嵌段共聚物的合成及表征

用辛酸亚锡［Ｓｎ（Ｏｃｔ）２］作催化剂，进行了端羟基聚乙二醇（ＰＥＧ）和１，４ 二氧六环酮（ＤＯＮ）的共聚反应，得到嵌段共聚物ＰＤＯＮ ｂ ＰＥＧ ｂ ＰＤＯＮ．根据１Ｈ ＮＭＲ谱图计算结果表明共聚物组成随两组分投料比而改变．共聚物的ＤＳＣ结果表明嵌段共聚物中ＰＤＯＮ的熔点和结晶度的变化相对较小，而ＰＥＧ的熔点及结晶度均有较大降低．将ＰＥＧ引入可大大提高材料的吸水率．     

含手性膦配体2-MBPA铂(Ⅱ)配合物的2DNMR

利用一维和二维ＮＭＲ技术,对含有手性膦配体的铂配合物ｃｉｓ－〔Ｐｔ（２－ＭＢＰＡＨ）２Ｃｌ２〕（１）,ｔｒａｎｓ－〔Ｐｔ（２－ＭＢＰＡＨ）２Ｃｌ２〕（２）,ｃｉｓ－〔Ｐｔ（２－ＭＢＰＡ）２〕（３）和ｃｉｓ－〔Ｐｔ（２－ＭＢＰＡ）（２－ＭＢＰＡＨ）Ｃｌ〕（４）进行１Ｈ和１３ＣＮＭＲ谱分析,区分了化合物（３）和（４）,归属了糖苷部分的１Ｈ和１３ＣＮＭＲ谱线,并根据磷和铂及磷与磷的偶合常数确定化合物（３）和（４）是顺式构型     

稀土配位催化环硫氯丙烷与环氧丙烷开环共聚合研究

报道了稀土配位催化剂对环硫氯丙烷（ＣＭＴ）与环氧丙烷（ＰＯ）的共聚合，许多稀土化合物与三异丁基铝组成的催化体系都能使两者共聚；尤为突出的是Ｙ（Ｐ２０４）３－Ａｌ（ｉ－Ｂｕ）３－Ｈ２Ｏ催化体系对此共聚反应具有优良的优良的催化活性，最大催化效率达６０００ｇ／ｍｏｌＹ，分子量较（η达１．０ｄｌ／ｇ）产率在５０％以上，应用ＩＲ、ＮＭＲ、ＧＰＣ等手段对共聚物进行一表征，测理ＣＭＴ（１）与ＰＯ（２）的共聚率分     

马来酸酐─环氧丙烷共聚物的合成及结构表征

本文将稀土络合物Ｎｄ（Ｐ２０４）３、Ｎｄ（Ｐ５０７）３、Ｎｄ（ｎａＰｈ）３、Ｎｄ（ａｃａｃ）３．３Ｈ２Ｏ与烷基铝组成的二元体系催化剂用于共聚马来酸酐（ＭＡｎ）与环氧丙烷（ＰＯ）获得成功．并采用１Ｈ—ＮＭＲ研究了共聚物三元组序列分布．结果表明，稀土络合催化剂为ＭＡｎ与ＰＯ共聚的优良催化刑，可得到高转化率、高交替度共聚物．共聚物数均分子量Ｍｎ和分子量分布分别为２０００—３０００、１．３—１．７，共聚物中ＭＡｎ的摩尔含量４０％以上．共聚物组成及序列分布与投料比、催化剂种类、溶剂性质等有关．理论计算表明，序列分布符合三级马尔可夫（Ｍａｒｋｏｆｆｉａｎ）过程．     

MoO_2Br_2体系催化丁二烯聚合中烯丙基卤素的作用

ＭｏＯ２Ｂｒ２－Ａｌ（ｉ－Ｂｕ）２ＯＰｈＣＨ３（－ｍ）体系催化丁二烯１，２－聚合过程中添加Ｃ３Ｈ５Ｘ（Ｘ＝Ｃｌ、Ｂｒ和Ｉ）对聚合物分子量有较好的调节作用，其中以Ｃ３Ｈ５Ｂｒ的调节作用最强，Ｍｎ从１７．５×１０５降至３．５×１０５，但对催化活性有一定的影响．在测定催化体系的ＵＶ光谱、（１３）Ｃ－ＮＭＲ谱、聚合活性和聚合动力学参数的基础上，讨论了Ｃ３Ｈ５Ｘ在催化体系中的行为．     

含手性膦配体的钯（Ⅱ）配合物的二维核磁共振研究

利用一维和二维ＮＭＲ技术，对含有手性膦配体甲基－３脱氧－３（二苯膦基）－４，６－氧－苄叉基－α－Ｄ一吡喃阿卓糖苷（３－ＭＢＰＡ）和甲基－２－脱氧－２－（二苯膦基）－４，６－氧－苄叉基－α－Ｄ－吡喃阿卓糖苷（２－ＭＢＰＡ）的钯配合物ｔｒａｎｓ—［Ｐｄ（３－ＭＢＰＡＨ）２ＣＩ２」（１），ｔｒａｎｓ－［Ｐｄ（２－ＭＢＰＡＨ）２ＣＩ２］（２）和ｃｉｓ－［Ｐｄ（３－ＭＢＰＡ）２］（３），ｃｉｓ－［Ｐｄ（２－ＭＢＰＡ）２］（４）进行~１Ｈ和~（１３）Ｃ ＮＭＲ谱分析，归属了全部的~１Ｈ和~（１３）Ｃ ＮＭＲ谱线，并根据磷的化学位移及Ｒａｍａｎ谱确定化合物（３）和（４）是顺式构型，对实验中的一些现象也做了简单讨论。     

马来酸酐─环氧丙烷共聚物的合成及结构表征

本文将稀土络合物Ｎｄ（Ｐ２０４）３，Ｎｄ（Ｐ５０７），Ｎｄ（ｎａｐｈ）３，Ｎｄ（ａｃａｃ）３．３Ｈ２Ｏ与烷基铝组成的二元体系催化剂用于共聚马来酸酐（ＭＡｎ）与环氧丙烷（ＰＯ）获得成功，并采用１Ｈ－ＮＭＲ研究了共聚的优良催化剂，可得到高转化率，高交替度共聚物，共聚物数均分子量Ｍｎ和分子量分布分别为２０００－３０００，１．３－１．７，共聚物中ＭＡｎ的摩尔含量４０％以上。共聚物组成及序列分布与投料比，催     

SYNTHESIS AND CRYSTAL STRUCTURE OF THE CLUSTER COMPOUND MoS_4Cu_2Ag（Ph_3P）_3Br．H_2O

ＳＹＮＴＨＥＳＩＳ ＡＮＤ ＣＲＹＳＴＡＬ ＳＴＲＵＣＴＵＲＥ ＯＦ ＴＨＥ ＣＬＵＳＴＥＲ ＣＯＭＰＯＵＮＤ ＭｏＳ_４Ｃｕ_２Ａｇ（Ｐｈ_３Ｐ）_３Ｂｒ．Ｈ_２Ｏ￥ＤｅＬｉａｎｇＬＯＮＧ；ＸｉｎＱｕａｎＸＩＮ（ＳｔａｌｅＫｅｙＬａｂｏｒａｔｏｒｙｏｆ?..     

Anionic graft polymerization of lithiated poly(2,6-dimethyl-1,4-phenylene ether)

Lithiated poly(2,6-dimethyl-1,4-phenylene ether) has been used as an initiator for the graft polymerization of isoprene, methyl methacrylate, hexamethylcyclotrisiloxane, and phenyl isocyanate with the use of toluene and tetrahydrofuran as solvents. The products were examined by gel-permeation chromatography for evidence of homopolymerization and graft polymerization. The composition of the graft copolymers was determined by NMR, and for isoprene and hexamethylcyclotrisiloxane, termination by trialkylchlorosilanes enabled chain lengths to be determined by NMR. The use of toluene gave rise to some homopolymerization, but with tetrahydrofuran, only hexamethylcyclotrisiloxane gave homopolymer. In all cases, graft copolymers were formed. With isoprene and methyl methacrylate, soluble graft copolymers were formed in good yield. In the former case approximately 60% 3,4 and 40% 1,4 addition was found. In the latter case 1,1-diphenylethylene was used to reduce crosslinking, in its absence, methyl methacrylate gave only crosslinked gels in tetrahydrofuran. Hexamethylcyclotrisiloxane added only one molecule per lithium on the polymer, the remainder giving homopolymer. Phenyl isocyanate gave some soluble graft copolymer in toluene, but only crosslinked products were obtained when tetrahydrofuran was used as reaction solvent.     

Atom transfer radical polymerization and copolymerization of isoprene catalyzed by copper bromide/2,2'-bipyridine

ATRP, as one of the most successful controlled/‘‘living' radical polymerization techniques, has been applied to a large variety of monomers including styrenes,(meth)acrylates,(meth)acrylamides,acrylonitrile, and vinyl acetate. However, ATRP of isoprene still remains a challenge due to poor solubility of copper catalysts in isoprene and low chain propagation rate constant of the monomer. In this work,Cu Br/2,2'-bipyridine was found to effectively mediate ATRP of isoprene at 100 °C, 130 °C, and 150 °C with ethyl 2-bromopropionate as an initiator. The polymerizations proceeded smoothly and reached 48.1%,53.3%, and 71.0% conversions, respectively, in 72 h, producing polyisoprenes with molecular weights close to theoretical values and relatively narrow distributions. A block copolymer of polystyrene-bpolyisoprene was prepared using Cu Br/2,2'-bipyridine as a catalyst and polystyrene as a macroinitiator.The ~1H NMR and ~(13)C NMR analysis of polyisoprene indicated that the polymer had 88.8% 1,4-addition structure and 63.9% of the polymer backbone units were in trans-configuration.     

阴离子聚合法合成PMMA-b-PMTFPS嵌段共聚物

以含缩醛官能团的有机锂为引发剂, 将甲基丙烯酸甲酯(MMA)与含氟硅氧烷单体1,3,5-三甲基-1,3,5-三(3',3',3'-三氟丙基)环三硅氧烷(F3)阴离子嵌段共聚, 获得了窄分子量分布的聚甲基丙烯酸甲酯-b-聚[甲基(3,3,3-三氟丙基)硅氧烷](PMMA-b-PMTFPS)嵌段共聚物, 并用GPC, 1H NMR, FTIR和DSC对嵌段共聚物进行了表征. 研究结果表明, 在THF中利用PMMA-OLi对F3进行阴离子开环聚合时, 单体F3浓度的选择对提高嵌段共聚物产率至关重要.     

异戊二烯稀土催化聚合过程中配合物结构及其转化的~(13)C-NMR研究

本文用~(13)C-NMR研究了异戊二烯(IP)在均相催化剂(CF_3CO_2)_2LnCl·EtOH—(i-Bu)AlH—o-C_6D_4Cl_2作用下的聚合过程。单体首先被活化同稀土配位生成η~4-IP稀土配合物(反式和顺式),然后η~4-IP的C-3和C-4插入Ln-H键生成η~3-烯丙基稀土配合物——η~3-(2-甲基)丁烯基稀土配合物(同式和对式)。二维~(13)C-NMR交换谱表明η~4-IP和0η~3-烯丙基的每对异构体在常温下分别进行慢交换反应(互变异构),这一过程使插入反应在常温下得以进行。     

Tem- and neutron reflection studies on surfaces and interfaces with block copolymers

The behavior of block copolymers at various interfaces is studied by transmission electron microscopy and neutron reflection. A thin film of a symmetric diblock copolymer of styrene and methyl methacrylate forms layer structures when in contact with air and a random copolymer of styrene and acrylonitrile containing 35 wt% acrylonitrile. When the random copolymer has an acrylonitrile content of 25 wt%, a competition between layer formation and diffusion of disordered micelles takes place. Driving force for these processes are different interfacial tensions and a changing miscibility behavior as a function of acrylonitrile contents of the random copolymers. The ordering behavior of a symmetric diblock copolymer of deuterated styrene and isoprene in contact with poly(3,5-dimethyl phenylene ether) is studied by neutron reflection. Polystyrene-block-poly(ethene-co-but-1-ene)-block-polystyrene with cylindrical PS microdomains shows an interfacial phase transition to lamellae near to the interface with different polymers. The morphological studies are in agreement with adhesion data obtained by peel tests on different bilayer specimens.     

Ambient temperature ATRP of benzyl methacrylate as a tool for the synthesis of block copolymers with styrene

The rapid atom transfer radical polymerization (ATRP) of benzyl methacrylate (BnMA) at ambient temperature was used to synthesize block copolymers with styrene as the second monomer. Various block copolymers such as AB diblock, BAB symmetric and asymmetric triblock, and ABABA pentablock copolymers were synthesized in which the polymerization of one of the blocks namely BnMA was performed at ambient temperature. It is demonstrated that the block copolymerization can be performed in a controlled manner, regardless of the sequence of monomer addition via halogen exchange technique. Using this reaction condition, the composition (ratio) of one block (here BnMA) can be varied from 1 to 100. It is further demonstrated that in the multiblock copolymer syntheses involving styrene and benzyl methacrylate, it is better to start from the PS macroinitiator compared with PBnMA macroinitiator. The polymers synthesized are relatively narrow dispersed (<1.5). It is identified that the ATRP of BnMA is limited to certain molecular weights of the PS macroinitiator. Additionally, a preliminary report about the synthesis of the block copolymer of BnMA‐methyl methacrylate (MMA), both at ambient temperature, is demonstrated. Subsequent deprotection of the benzyl group using Pd/C? H₂ results in methacrylic acid (MAA)–methyl methacrylate (MAA–MMA) amphiphilic block copolymer. GPC, IR, and NMR are used to characterize the synthesized polymers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2848–2861, 2006     

Synthesis and Characterization of a Diblock Copolymer of Methyl Methacrylate and Vinyl Acetate by Successive Photo‐Induced Charge Transfer Polymerization Using Ethanolamine as the Parent Compound

Communication: A diblock copolymer consisting of poly(methyl methacrylate) (PMMA) and poly(vinyl acetate) (PVAc) with hydroxyl group at one end is prepared by successive charge transfer polymerization (CTP) under UV irradiation at room temperature using ethanolamine and benzophenone as a binary initiation system. The diblock copolymer PMMA‐b‐PVAc could be selectively hydrolyzed to the block copolymer of poly(methyl methacrylate) and poly(vinyl alcohol) (PVA) using sodium ethoxide as the catalyst. Both copolymers, PMMA‐b‐PVAc and PMMA‐b‐PVA, are characterized in detail by means of FTIR and ¹H NMR spectroscopy, and GPC. The effect of the solvent on CTP and the kinetics of CTP are discussed.     

π-烯丙基稀土配合物的合成、结构及其催化烯烃聚合反应机理的研究——Ⅱ.LiY(π-C_3H_5)_4·2.5D催化异戊二烯聚合反应机理的研究

<正> 在稀土配位共轭双烯烃聚合反应机理的研究中,一般认为按π-烯丙基机理进行,但迄今为止尚缺乏足够的实验证据。我们曾用~1H-NMR、一维~(13)C-NMR和二维~(13)C-NMR系统地研究了(CF_3COO)_2LnCl·EtoH-(i-Bu)_2AIH-共轭双烯烃(Ln=La、Pr、Nd、Sm、Tb、Ho、Sc和Y)均相聚合体系的聚合机理,提出了η~4-共轭双烯(顺式-反式-)和η~3-烯丙基(同式-对式-)机理。但由于广烯丙基稀土配合物稳定性差,难于合成,加之聚合体系中很难直接分离出π-烯丙基稀土配合物活性体,为此,至今尚未能用模型π-烯丙基稀土配合物对上述机理进行研究。我们已合成一系列π-烯丙基稀土配合物LiLn     

Organized polymerization of functional diblock copolymers possessing central isoprene groups

Functional diblock copolymers possessing central isoprene groups were synthesized by anionic addition in a three-stage process using styrene, isoprene, and 2-vinylpyridine monomers. These diblock copolymers formed microphase-separated structure in the solid state. Where the central isoprene groups are organized regularly at the domain interface of the microphase-separated structure, this is due to the functional groups being located at the block junction position. Addition-condensation of diblock copolymer film with sulfur monochloride formed A_nB_n star block copolymers by organization effects. © 1993 John Wiley & Sons, Inc.     

Synthesis of Poly(Styrene)-block-poly(methacrylate)-block-poly(styrene) via Site Transformation Reaction

Abstract

Triblock copolymers with polystyrene outer blocks and an inner polymethacrylate block were synthesized by a site transformation reaction using anionic and cationic polymerization techniques. In order to obtain such ABA block copolymers, two synthetic routes have been applied. In the first case, different methacrylates (methyl methacrylate, 2-ethylhexyl methacrylate) were polymerized anionically with a bifunctional initiator to get poly(methacrylate) dianions later forming the inner block whereas in the second case poly(styrene)-block-poly(methacrylate) anions were synthesized by monofunctional initiation via sequential monomer addition. In a subsequent step, the living chain ends of the methacrylate dianions on one side, and the diblock copolymer anions on the other side, were functionalized with 1,4-bis(l-bromoethyl)benzene in order to obtain a potential bifunctional or monofunctional macroinitiator for the cationic polymerization of styrene. Then, styrene was polymerized cationically with the macroinitiator in the presence of SnCl₄ as coinitiator and _n Bu₄NBr as a common ion salt in CH₂Cl₂ at -15°C. Block formation was proven by SEC measurements, preparative SEC and NMR characterization.