Ferrocene-based heteroditopic receptors displaying high selectivity toward lead and mercury metal cations through different channels

The synthesis and electrochemical, optical, and ion-sensing properties of ferrocene-imidazophenazine dyads are presented. Dyad 4 behaves as a highly selective chemosensor molecule for Pb(2+) cations in CH(3)-CN/H(2)O (9:1). The emission spectrum (λ(exc) = 317 nm) undergoes an important chelation-enhanced fluorescence effect (CHEF = 47) in the presence of Pb(2+) cations, a new low-energy band appeared at 502 nm, in its UV/vis spectrun, and the oxidation redox peak is anodically shifted (ΔE(1/2) = 230 mV). The presence of Hg(2+) cations also induced a perturbation of the redox potencial although in less extension than those found with Pb(2+) cations. Dyad 7, bearing two fused pyridine rings, has shown its ability for sensing Hg(2+) cations selectively through three channels: electrochemical, optical, and fluorescent; the oxidation redox peak is anodically shifted (ΔE(1/2) = 200 mV), a new low-energy band of the absorption spectrum appeared at 485 nm, and the emission spectrum (λ(exc) = 340 nm) is red-shifted by 32 nm accompanied by a remarkable chelation-enhanced fluorescent effect (CHEF = 165). Linear sweep voltammetry revealed that Cu(2+) cations induced oxidation of the ferrocene unit in both dyads. (1)H NMR studies have been carried out to obtain information about the molecular sites which are involved in the binding process.     

Synthesis, structural charaterization, and electrochemical and optical properties of ferrocene-triazole-pyridine triads

The synthesis and electrochemical, optical, and cation-sensing properties of the ferrocene-triazole-pyridine triads 3 and 5 are presented. Azidoferrocene 1 and 1,1'-diazidoferrocene 4 underwent the "click" reaction with 2-ethynylpyridine to give the triads 3 and 5 in 81% and 68% yield, respectively. Electrochemical studies carried out in CH(3)CN in the presence of increasing amounts of Zn(2+), Ni(2+), Cd(2+), Hg(2+), and Pb(2+) metal cations, showed that the wave corresponding to the ferrocene/ferrocenium redox couple is anodically shifted by 70-130 mV for triad 3 and 167-214 mV for triad 5. The maximum shift of the ferrocene oxidation wave was found for 5 in the presence of Zn(2+). In addition, the low-energy band of the absorption spectra of 3 and 5 are red-shifted (Δλ = 5-10 nm) upon complexation with these metal cations. The crystal structures of compounds 3 and 5 and the complex [3(2)·Zn](2+) have been determined by single-crystal X-ray methods. (1)H NMR studies as well as density functional theory calculations have been carried out to get information about the binding sites that are involved in the complexation process.     

Synthesis, electrochemical, and optical properties of linear homo- and heterometallocene triads

The synthesis, electrochemical, and optical properties of homo- (5, 8, 9, and 12) and heterometallic (6, 7, 10, and 11) ferrocene-ruthenocene triads, are presented. Triferrocenyl derivatives 5 and 9 form the mixed-valence species 5*+ and 92+ by partial oxidation, which show intramolecular electro-transfer phenomena. Interestingly, spectroelectrochemical studies of compound 11, bearing two peripheral ferrocene units and one central ruthenocene moiety, revealed the presence of low-energy bands in the near-infrared (NIR) region, which indicate a rather unusual intramolecular charge-transfer between the ferrocene and ruthenocene units. The value of the electronic coupling parameter V(ab) = 150 cm(-1) calculated by deconvolution of the observed Fe(II)-Fe(III) IVCT transition in the mixed-valence compound 11*+, (d(Fe(II)-Fe(III)) = 18.617 A), indicates the ability of the ruthenocene system to promote a long distance intervalence electron-transfer. Moreover, the reported triads show selective cation sensing properties. Triads 5, 9, and 11 behave as dual redox and optical chemosensors for Zn(2+), Hg(2+), and Pb(2+). Their oxidation redox peaks are anodically shifted (up to 130 mV), and their low-energy (LE) bands of the absorption spectra are red-shifted (up to 115 nm) upon complexation with these metal cations. These changes in the absorption spectra are accompanied by dramatic color changes which allow the potential for "naked eye" detection.     

Aldimines generated from aza-Wittig reaction between bis(iminophosphoranes) derived from 1,1'-diazidoferrocene and aromatic or heteroaromatic aldehydes: electrochemical and optical behaviour towards metal cations

Aldimine 4 bearing a 2-quinolyl group was prepared by aza-Wittig reaction between the triphenyliminophosphorane derived from the 1,1'-diazidoferrocene and 2-formylquinoline. However, aldimine 5, bearing a pyrene ring, was prepared using the most reactive tributyliminophosphorane derivative and the corresponding 1-formylpyrene. On the other hand, formation of aldimine 8 involves a tandem process, Staudinger reaction/intramolecular aza-Wittig reaction, by using directly 1,1'-diazidoferrocene and 2-(diphenylphosphonyl)benzaldehyde. Aldimine 4 behaves as chemosensor molecule for Ni(2+), Zn(2+), Cd(2+), Hg(2+) and Pb(2+) cations through two different channels: electrochemical (ΔE(1/2) = 222-361 mV) and chromogenic (Δλ = 122-153 nm), which can be used for the "naked eye" detection of these metal cations. Aldimine 5 behaves as a highly selective redox (in CH(3)CN) and fluorescent (in CH(3)Cl-DMF) probe for Hg(2+) metal cations even in the presence of a large excess of the other metal cations tested. Aldimine 8 displays electrochemical affinity (ΔE(1/2) = 60-288 mV) to Li(+), Ca(2+), Mg(2+), Zn(2+) and Pb(2+) metal cations, with the phosphorus oxide functionality as a binding site. From the (1)H NMR titration data as well as DFT calculations, different tentative binding modes have been established, for these structurally related ferrocenyl derivatives.     

A bisferrocene-benzobisimidazole triad as a multichannel ditopic receptor for selective sensing of hydrogen sulfate and mercury ions

The bisferrocene-benzobisimidazole triad behaves as a selective redox and fluorescent chemosensor for HSO(4)(-) and Hg(2+) ions, exhibiting an easily detectable signal change in both the redox potential of the ferrocene/ferrocinium redox couple and in the emission band which is red-shifted (Δλ = 10-13 nm) and enhanced in intensity (Chelation Enhanced Fluorescence, CHEF = 486-225) upon complexation with these ions, in EtOH solutions.     

Cation coordination induced modulation of the anion sensing properties of a ferrocene-imidazophenanthroline dyad: multichannel recognition from phosphate-related to chloride anions

A new chemosensor molecule 1 based on a ferrocene-imidazophenanthroline dyad, effectively recognizes aqueous hydrogenpyrophosphate and the organic anions ADP and ATP through three different channels. A cathodic shift of the ferrocene/ferrocenium oxidation wave (Delta E 1/2 ranging from -130 mV for hydrogenpyrophosphate and fluoride to -40 mV for ADP). A progressive red-shift of the absorption bands and/or appearance of a new low energy band at 314-319 nm. These changes in the absorption spectra are accompanied by color changes from pale yellow to orange or pink, which allow the potential for "naked eye" detection. The emission spectrum (lambda exc = 390 nm) undergoes an important chelation-enhanced fluorescence effect (CHEF = 50) in the presence of 2.5 equiv of hydrogenpyrophosphate anion and with a large excess of fluoride anion (CHEF = 114). Interestingly, the emission spectrum obtained at different excitation energy (lambda exc = 340 nm) in the presence of AcOH acid is red-shifted and not only perturbed by the hydrogenpyrophosphate anion (CHEF = 71) but also with the organic anions ATP (CHEF = 25), ADP (CHEF = 15), and the dihydrogenphosphate (CHEF = 25). The stable heterobimetallic ruthenium (II) complex 2 selectively senses the chloride anion over other anions examined through two channels: cathodic redox shift (Delta E 1/2 = -80 mV) of the Fe(II)/Fe(III) redox couple keeping the oxidation wave of the ruthenium (II) center unchanged and a significant red emission enhancement (CHEF = 30). (1)H and (31)P NMR studies as well as DFT calculations have been carried out to get information about which molecular sites are involved in bonding. About the deprotonation/coordination dualism, the combined electrochemical, absorption, emission, and NMR data strongly support that fluoride anion induces only deprotonation, anions dihydrogenphosphate, ATP, and ADP from hydrogen-bonded complexes and formation of hydrogen-bonded complex between receptor 1 and hydrogenpyrophosphate anion and deprotonation proceed simultaneously. In regards to receptor 2, all available data (electrochemical, absorption, emission, and 1H NMR) strongly support the formation of a [2. Cl ( - ) ] hydrogen-bonded complex.     

Electroactive thiazole derivatives capped with ferrocenyl units showing charge-transfer transition and selective ion-sensing properties: a combined experimental and theoretical study

The synthesis, optical and electrochemical properties, and X-ray characterization of two thiazole derivatives capped by ferrocenyl groups (5 and 7) and their model compounds with one ferrocenyl, either at 2 or 5 position of the mono- or bis-thiazolyl rings (3, 9, 11, and 14), are presented. Bisferrocenyl thiazole 5 forms the mixed-valence species 5*+ by partial oxidation which, interestingly, shows an intramolecular electron-transfer phenomenon. Moreover, the reported heteroaromatic compounds show selective ion-sensing properties. Thus, ferrocenylthiazoles linked across the 5 position of the heteroaromatic ring are selective chemosensors for Hg2+ and Pb2+ metal ions; 5-ferrocenylthiazole 3 operates through two channels, optical and redox, for Hg2+ and only optical for Pb2+, whereas 1,1'-bis(thiazolyl)ferrocene 14 is only an optical sensor for both metal ions. Moreover, complex 3 behaves as an electrochemically induced switchable chemosensor because of the low metal-ion affinity of the oxidized 3*+ species. On the other hand, ferrocenylthiazole 9, in which the heterocyclic ring and the ferrocene group are linked across the 2 position, is a selective redox sensor for Hg2+ metal ions, and it responds optically, as does bis(thiazolyl)ferrocene 11, to a narrow range of cations (Zn2+, Cd2+, Hg2+, Ni2+, and Pb2+). Finally, bis(ferrocenyl)thiazole 5 is a dual optical and redox sensor for Zn2+, Cd2+, Hg2+, Ni2+, and Pb2+, whereas bis(ferrocenyl) compound 7, bearing a bis(thiazole) unit as a bridge, is only a chromogenic sensor for Zn2+, Cd2+, Hg2+, Ni2+, and Pb2+. The experimental data and conclusions about both the electronic and ion-sensing properties are supported by DFT calculations which show, in addition, an unprecedented intramolecular electron-transfer reorganization after the first one-electron oxidation of compound 5.     

A simple but effective dual redox and fluorescent ion pair receptor based on a ferrocene-imidazopyrene dyad

The ferrocene-imidazopyrene dyad, bearing the imidazole ring as the only receptor site, acts as a redox and optical molecular sensor for ion pairs, exhibiting an easily detectable signal change in the redox potential of the ferrocene/ferrocinium redox couple and in the emission spectrum. Perturbation of the emission spectrum follows the order Pb(2+) > Hg(2+) > Zn(2+) for cations and H(2)PO(4)(-) > AcO(-) for anions.     

Bis[1,1'-N,N'-(2-picolyl)aminomethyl]ferrocene as a redox sensor for transition metal ions

The compound bis[1,1'-N,N'-(2-picolyl)aminomethyl]ferrocene, L(1), was synthesized. The protonation constants of this ligand and the stability constants of its complexes with Ni(2+), Cu(2+), Zn(2+), Cd(2+) and Pb(2+) were determined in aqueous solution by potentiometric methods at 25 degrees C and at ionic strength 0.10 mol dm(-3) in KNO(3). The compound L(1) forms only 1:1 (M:L) complexes with Pb(2+) and Cd(2+) while with Ni(2+) and Cu(2+) species of 2 [ratio] 1 ratio were also found. The complexing behaviour of L(1) is regulated by the constraint imposed by the ferrocene in its backbone, leading to lower values of stability constants for complexes of the divalent first row transition metals when compared with related ligands. However, the differences in stability are smaller for the larger metal ions. The structure of the copper complex with L(1) was determined by single-crystal X-ray diffraction and shows that a species of 2:2 ratio is formed. The two copper centres display distorted octahedral geometries and are linked through the two L(1) bridges at a long distance of 8.781(10) Angstrom. The electrochemical behaviour of L(1) was studied in the presence of Ni(2+), Cu(2+), Zn(2+), Cd(2+) and Pb(2+), showing that upon complexation the ferrocene-ferrocenium half-wave potential shifts anodically in relation to that of the free ligand. The maximum electrochemical shift ([capital Delta]E(1/2)) of 268 mV was found in the presence of Pb(2+), followed by Cu(2+)(218 mV), Ni(2+)(152 mV), Zn(2+)(111 mV) and Cd(2+)(110 mV). Moreover, L(1) is able to electrochemically and selectively sense Cu(2+) in the presence of a large excess of the other transition metal cations studied.     

Highly selective mercury(II) cations detection in mixed-aqueous media by a ferrocene-based fluorescent receptor

A new chemosensor molecule 3 based on a ferrocene-imidazophenanthrophenazine dyad effectively recognizes Hg(2+) in an aqueous environment through three different channels. Upon recognition, an anodic shift of the ferrocene-ferrocenium oxidation potential (ΔE(1/2) = 240 mV) and a progressive red shift (Δλ = 17 nm) of the low energy band in its absorption spectrum is produced. The emission spectrum of 3 in an aqueous environment, CH(3)CN-EtOH-H(2)O (65:25:10), and conducted at pH = 7.4 (20 × 10(-3) M HEPES) (Φ = 0.003), is perturbed after addition of Hg(2+) cations and an intense and structureless red shift emission band at 494 nm (Δλ = 92 nm) appeared along with an increase of the intensity of the emission band (CHEF = 77), the quantum yield (Φ = 0.054) resulted in a 18-fold increase. The combined (1)H NMR data of the complex and the theoretical calculations suggest the proposed bridging coordination mode.     

Multichannel recognition of hydrogen sulphate anion by a Zn(II)–triazole–pyridine complex bearing a ferrocenyl pendant

Receptors ferrocene–triazole–pyridine triads assembled with Zn(II) or Cd(II) metal cations behave as chemosensor molecules for HSO₄ ^?  anions through electrochemical and optical channels: the redox peak of the ferrocene/ferrocenium redox couple is shifted cathodically by 72–53 mV, and a new absorption band appeared in the UV–vis spectrum upon complexation with the HSO₄ ^?  anion. Association constants, detection limits and stoichiometries of the recognition processes have been determined, whereas ¹H NMR experiments and density functional theory calculations are used to suggest the plausible binding mode taking place in the new supramolecular assembly formed.     

Synthesis and characterization of electroactive ferrocene derivatives: ferrocenylimidazoquinazoline as a multichannel chemosensor selectively for Hg2+ and Pb2+ ions in an aqueous environment

The synthesis and characterization of ferrocene (Fc) derivatives 4-[2,5-diferrocenyl-4-(4-pyridyl)imidazolidin-1-ylmethyl]pyridine (1), ferrocenylmethylenepyridin-3-ylmethylamine (2), N,N'-bis(ferrocenylmethylene)-2,4,6-trimethylbenzene-1,3-diamine (3), and 6-ferrocenyl-5,6-dihydro[4,5]imidazo[1,2-c]quinazoline (4) have been described. Structures of 1, 2, and 4 have been determined by single-crystal X-ray diffraction analyses. At 25 °C, 1-3 are nonfluorescent, while 4 displays moderate fluorescence and chromogenic, fluorogenic, and electrochemical sensing selectively toward Hg(2+) and Pb(2+) ions. Association constants (K(a)) for Hg(2+) and Pb(2+) have been determined by the Benesi-Hildebrand method. Job's plot analysis supported 1:1 and 1:2 stoichiometries for Hg(2+) and Pb(2+) ions. Cyclic voltammograms of 1-4 exhibited reversible waves corresponding to a ferrocene/ferrocenium couple. The wave associated with 4 (+0.0263 V) exhibited positive (ΔE(pa) = 0.136 V) and negative (ΔE(pa) = 0.025 V) shifts in the presence of Hg(2+) and Pb(2+) ions, respectively. The mode of interaction between metal ions and 4 has been supported by (1)H NMR spectroscopy and mass spectrometry studies and verified by theoretical studies. It presents the first report dealing with ferrocene-substituted quinazoline as a multichannel chemosensor for Hg(2+)/Pb(2+) ions.     

Highly sensitive multiresponsive chemosensor for selective detection of Hg2+ in natural water and different monitoring environments

A new chemosensor RF1 that combines a ferrocene unit and a rhodamine block via the linkage of a carbohydrazone binding unit was designed and prepared for the highly selective detection of Hg (2+) in natural water. This chemosensor displays great brightness and fluorescence enhancement following Hg (2+) coordination within the limit of detection for Hg (2+) at 1 parts per billion (ppb). The fluorescence intensities are nearly proportional to the amount of Hg (2+) at the ppb level. It is capable of distinguishing between the safe and the toxic levels of inorganic mercury in drinking water. Hg (2+)-binding also arouses the absorption of the rhodamine moiety in RF1 significantly with the chromogenic detection limit for Hg (2+) at 50 ppb. The conventional UV-vis spectroscopic method thus has the potential to provide the critical information about the mercury hazard assessment for industrial wastewater discharging. The obvious and characteristic color change of the titration solution from colorless to pink upon the addition of Hg (2+) demonstrates that RF1 can be used for "naked-eye" detection of Hg (2+) in water. The Hg (2+) complexation also causes a significant shift of the redox potential about the ferrocene/ferrocenium couple. The electrochemical responses provide the possibility to quantitative analysis of Hg (2+) at the parts per million (ppm) level. Preliminary investigations in natural water samples including seawater and freshwater indicate that RF1 offers a direct and immediate Hg (2+) detection in complex media, pointing out its potential utility in environment monitoring and assessment. The responses of RF1 are Hg (2+) specific, and the chemosensor exhibits high selectivity toward Hg (2+) over other Group 12 metals, alkali, alkaline earth metals, and most of the divalent first-row transition metals. The RF1-Hg (2+) complex is successfully isolated and the Hg (2+)-binding is reversible. The crystal structure and spectral properties of its congener RF2 that contains one ferrocene group and two rhodamine 6G moieties were also investigated for a comparison.     

Dual signaling system with an extended-tetrathiafulvalene-phenanthroline dyad acting as an electrooptical cation chemosensor

An efficient synthesis of unprecedented fused extended-tetrathiafulvalene-dipyridoquinoxaline (exTTF-dpq) dyad is described through the Horner-Wardsworth-Emmons olefination methodology from the dipyrido[3,2-a:2',3'-c]-benzo[3,4]phenazine-11,16-quinone (NqPhen) ligand starting material. This exTTF-dpq dyad is demonstrated to act as a dual redox and colorimetric sensor for cations exploiting the proximity between the redox tetrathiafulvalene and the optical phenanthroline detecting sites. Its ability for sensing cations from the d-group metal transitions (Fe(2+), Ni(2+), and Zn(2+)) and also with varied cations such as Ca(2+) and Pb(2+) is presented.     

Triple channel sensing of Pb(II) ions by a simple multiresponsive ferrocene receptor having a 1-deazapurine backbone

A new redox, chromogenic, and fluorescent chemosensor molecule based on a deazapurine ring selectively senses aqueous Pb2+ in acetonitrile over other metal ions examined: redox shift (DeltaE1/2 = 0.15 V of the Fe(II)/Fe(III) redox couple), the colorless to orange color change, and an emission change of 620-fold, with an unprecedented detection limit of 2.7 microg L-1. The signal transduction occurs via a reversible CHEF with this inherent quenching metal ion.     

A ferrocenyl-guanidine derivative as a highly selective electrochemical and colorimetric chemosensor molecule for acetate anions

A highly preorganized chemosensor molecule 1 based on a ferrocenyl-guanidine decorated with a chromogenic aryl azo moiety recognizes the acetate anion in acetonitrile solution. At first, receptor 1 underwent two-step oxidation events. Initially, oxidation of 1 occurs at the Fe(II) centre (E(p) = 440 mV) to form a ferrocenium species, followed by fast electron transfer from the guanidine moiety of the receptor to the Fe(III) centre with concomitant generation of an Fe(II) species with a radical cation centred at the nitrogen atom. In the second step, the radical cation species formed should undergo electrochemical oxidation at higher potential (E(p) = 830 mV). This assumption is supported by spectroelectrochemical studies. A remarkable cathodic shift (182 mV) of the ferrocene/ferrocenium oxidation peak (E(p) = 440 mV) and a progressive red-shift (Δλ = 30 nm) of the low energy band are observed in its absorption spectrum upon complexation of receptor 1 with the acetate anion. This change in the absorption spectrum is accompanied by a colour change from yellow to orange, which can be used for the "naked-eye" detection of this anion. Its monoprotonated form is able to selectively sense the less basic Cl(-), Br(-), NO(3)(-), and HSO(4)(-) anions: the oxidation redox peak at E(p) = 865 mV is cathodically shifted (107-182 mV).     

Ferrocene based chemosensor for Cu2+--a dual channel signaling system

A new ferrocene based molecule behaves as a dual channel signaling chemosensor for Cu²⁺ over other metal ions. The perturbations in the absorption pattern and electrochemical behavior of the chemosensor are presented. These have been proposed to be caused by the interaction of Cu²⁺ with the d-electrons and the electron rich π-system of the ferrocenyl derivative. The sensing event is manifested by a high energy shift in the ligand centered π-π* absorption and appearance of a new redox wave at more positive potential, in addition to Fe(II)/Fe(III) couple wave (two wave electrochemical behavior).     

A highly selective redox, chromogenic, and fluorescent chemosensor for Hg2+ in aqueous solution based on ferrocene-glycine bioconjugates

The synthesis, electrochemical, optical, and metal-cation-sensing properties of ferrocene-glycine conjugates C(30)H(38)O(8)N(8)Fe (2) and C(20)H(24)O(4)N(4)Fe (3) have been documented. Both compounds 2 and 3 behave as very selective redox (ΔE(1/2) = 217 mV for 2 and ΔE(1/2) = 160 mV for 3), chromogenic, and fluorescent chemosensors for Hg(2+) cations in an aqueous environment. The considerable changes in their absorption spectra are accompanied by the appearance of a new low-energy peak at 630 nm (2, ε = 1600 M(-1) cm(-1); 3, ε = 822 M(-1) cm(-1)). This is also accompanied by a strong color change from yellow to purple, which allows a prospective for the "naked eye" detection of Hg(2+) cations. These chemosensors present immense brightness and fluorescence enhancement (chelation-enhanced fluorescence = 91 for 2 and 42 for 3) following Hg(2+) coordination within the limit of detection for Hg(2+) at 7.5 parts per billion.     

Dual-mode unsymmetrical squaraine-based sensor for selective detection of Hg2+ in aqueous media

A novel chemosensor based on unsymmetrical squaraine dye (USQ-1) for the selective detection of Hg(2+) in aqueous media is described. USQ-1 in combination with metal ions shows dual chromogenic and "turn-on" fluorogenic response selectivity toward Hg(2+) as compared to Li(+), Na(+), K(+), Mg(2+), Ca(2+), Ba(2+), Al(3+), Cu(2+), Cd(2+), Mn(2+), Fe(3+), Ag(+), Pb(2+), Zn(2+), Ni(2+) and Co(2+) due to the Hg(2+)-induced deaggregation of the dye molecule. A recognition mechanism based on the binding mode is proposed based on the absorption and fluorescence changes, (1)H NMR titration experiments, ESI-MS study, and theoretical calculations.     

Ratiometric sensing of Hg2+ based on the calix[4]arene of partial cone conformation possessing a dansyl moiety

A new fluorescent chemosensor based on the calix[4]arene of partial cone conformation possessing a dansyl moiety has been synthesized. The chemosensor demonstrates selective optical recognition of Hg(2+) and Cu(2+) in two contrasting modes. The receptor exhibited ratiometric sensing of Hg(2+) and "ON-OFF" type of fluorescence behavior in the presence of Cu(2+). The compound behaves as a fluorescent molecular switch upon chemical inputs of Hg(2+) and Cu(2+) ions.