含孪尾型丙烯酰胺的HAPAM在新胶束聚合体系中的制备及其疏水缔合性

以表面活性单体2-丙烯酰胺基十二烷磺酸钠(NaAMC12S)为表面活性剂构建了新的胶束共聚合体系,实施了丙烯酰胺(AM)与N,N-二正十二烷基丙烯酰胺(DiC12AM)的胶束共聚合,制备了含孪尾型丙烯酰胺的疏水缔合聚丙烯酰胺(HAPAM),该聚合物为三元共聚物DiC12AM/NaAMC12S/AM.通过控制共聚合条件,制得了微结构系列变化的共聚物;采用红外光谱法表征了三元共聚物的化学结构,用荧光探针法与表观粘度法重点研究了共聚物DiC12AM/NaAMC12S/AM的大分子链微结构与其疏水缔合性的关系.结果表明:新胶束共聚合体系大大简化了胶束的共聚合操作,而且由于表面活性单体进入共聚物主链,使三元共聚物DiC12AM/NaAMC12S/AM具有更强的疏水缔合性.与由单尾型丙烯酰胺N-正十二烷基丙烯酰胺(C12AM)为疏水单体制备的HAPAM相比,由DiC12AM制得的HAPAM疏水缔合性更为显著.     

新一族疏水缔合聚丙烯酰胺NaAMC14S/AM与Gemini表面活性剂之间的相互作用

在水溶液中进行了表面活性单体丙烯酰胺基十四烷基磺酸钠(NaAMC14S)与丙烯酰胺(AM)的均相共聚合, 制备了具有微嵌段结构的疏水缔合聚丙烯酰胺NaAMC14S/AM, 合成了阳离子型Gemini表面活性剂二溴化-N,N′-二(二甲基十二烷基)己二铵(C12C6C12Br2), 采用表观粘度法和荧光探针法研究了共聚物NaAMC14S/AM与Gemini表面活性剂C12C6C12Br2的相互作用. 研究结果表明, 疏水缔合聚丙烯酰胺NaAMC14S/AM与Gemini表面活性剂C12C6C12Br2之间存在着很强的相互作用, 既存在静电相互作用, 又存在强烈的疏水相互作用, 表现在以下几方面: C12C6C12Br2的加入, 使共聚物NaAMC14S/AM在浓度小于其临界缔合浓度(cac)时即发生分子间的缔合; C12C6C12Br2在低于其临界胶束浓度时, 就与共聚物NaAMC14S/AM形成混合胶束; 当共聚物的浓度为0.30%(w)时, 随着C12C6C12Br2加入量的增多, 共聚物水溶液的粘度会发生大幅度的增加, 在最大值处粘度竟提高了3个数量级. 研究还发现, 共聚物NaAMC14S/AM与C12C6C12Br2之间的相互作用还与共聚物分子链中的疏水微嵌段含量有关, 疏水微嵌段含量越多, NaAMC14S/AM与C12C6C12Br2之间的相互作用越强, 溶液粘度增加的程度越大.     

表面活性单体NaAMC_(14)S/丙烯酰胺共聚物的分子链微结构与疏水缔合性

在实施丙烯酰胺型阴离子表面活性单体2-丙烯酰胺基十四烷磺酸钠(NaAMC14S)与丙烯酰胺(AM)水溶液均相共聚合过程中,分别通过改变AM与NaAMC14S的投料比、改变外加电解质NaCl的加入量以及引发剂的用量,制备了分子链微结构系列变化的具有微嵌段结构的共聚物NaAMC14S/AM;采用荧光探针法与表观粘度法研究了共聚物分子链微结构与其疏水缔合性能之间关系,探索了共聚物分子链中疏水微嵌段含量、疏水微嵌段长度及共聚物分子量诸微结构因数对共聚物疏水缔合性的影响.结果表明,共聚物NaAMC14S/AM的疏水缔合性随着疏水微嵌段含量的增加而增强,随着疏水微嵌段长度的增长而增强,当疏水微嵌段含量和嵌段长度一定时,共聚物的疏水缔合性随分子量的增大而增强.     

表面活性单体NaAMC14S的胶束化行为对共聚合过程的影响

测定了表面活性单体2-丙烯酰胺基十四烷磺酸钠(NaAMC14S)的Krafft点与不同温度下的临界胶束浓度(cmc), 使NaAMC14S的浓度分别处于cmc上下, 实施了NaAMC14S与丙烯酰胺(AM)的水溶液共聚合. 用复合电导滴定法测定了共聚物的组成, 用差示扫描量热法(DSC)测定了共聚物的热行为, 采用荧光探针芘测定了共聚物水溶液的疏水缔合性, 重点探索了在临界胶束浓度上下NaAMC14S与AM的共聚合机理. 实验结果表明, NaAMC14S的胶束化行为对共聚合过程有很大的影响, 当NaAMC14S在临界胶束浓度以上与AM共聚合时, 遵循的是一种微嵌段共聚合的模式, 聚合过程中共聚物的组成随转化率大幅度地变化；当NaAMC14S在临界胶束浓度以下与AM共聚合时, 进行的是无规共聚合, 聚合过程中聚合物的组成随时间变化比较缓慢; DSC的测试与荧光探针法的测定结果证实了上述机理     

丙烯酰胺型阴离子表面活性单体与丙烯酰胺共聚物水溶液的流变特性

以丙烯酰胺型阴离子表面活性单体2-丙烯酰胺基十四烷基磺酸钠(NaAMC14S)为共单体,与丙烯酰胺(AM)的水溶液均相共聚合,使NaAMC14S的浓度分别处于临界胶束浓度上下,分别制备了具有无规结构与微嵌段结构的两类共聚物;用红外光谱法对共聚物的结构进行了表征,使用乌氏粘度法测定了特性粘数,相对表示出了共聚物的分子量;采用荧光探针法与表观粘度法重点研究了两类共聚物的疏水缔合性与水溶液的流变特性.研究结果表明,具有微嵌段结构的共聚物具有很强的疏水缔合性,当其水溶液的浓度达0.2wt%后,表观粘度迅速提高;其水溶液的切力变稀行为具有明显的可逆性,表现出强的抗剪切性能.本研究中特别发现,具有微嵌段结构的共聚物其盐水溶液的表观粘度远高于纯水溶液的表观粘度,当共聚物浓度为0.3wt%、CaCl2浓度为2wt%时,溶液的表观粘度竟然提高了3个数量级,表现出独特的正性盐敏性(即遇盐变稠).     

荧光探针法研究疏水改性聚丙烯酰胺溶液的疏水缔合行为

采用胶束共聚 共水解方法合成疏水改性水溶性聚合物聚(丙烯酰胺/丙烯酸钠/N 辛基丙烯酰胺)[P(AM/NaAA/C8AM)],并以芘为荧光探针,应用稳态荧光光谱法研究了它的疏水缔合行为。结果表明,随聚合物浓度、疏水单体摩尔分数、疏水侧链长和温度的增加,疏水缔合作用增强;不同疏水单体含量的P(AM/NaAA/C8AM)的临界缔合浓度为1.5~3.0 g/L;表面活性剂十二烷基硫酸钠(SDS)与P(AM/NaAA/C8AM)发生了强烈的疏水相互作用,形成混合胶束,得到SDS的临界胶束浓度(CMC)为8×10-3 mol/L;由于聚合物链上羧基的存在,使其具有良好的 pH敏感性,随 pH值的增大,P(AM/NaAA/C8AM)的疏水缔合作用呈现先减弱后恒定再增强的变化。     

含氟疏水缔合聚丙烯酰胺的制备及溶液性质研究

以异佛尔酮二异氰酸酯(IPDI)、四氟丙醇(FOH)和烯丙基聚乙二醇(APEG1200)为原料合成了含氟表面活性单体(FSM),并以FSM为疏水单体,在它的胶束溶液中实现了其与丙烯酰胺(AM)和2-丙烯酰胺基-2-甲基丙磺酸(AMPS)的水溶液共聚合,制备出含氟疏水缔合聚丙烯酰胺(FAPAM)。采用流变仪研究了FAPAM水溶液的疏水缔合性能,并考察了盐、剪切率和温度对FAPAM缔合性能的影响。结果表明,FAPAM水溶液的疏水缔合性能受FSM含量的影响,具有一定的耐盐性。FAPAM属于假塑性体系,表现出较强的抗剪切性能。适当升高温度对FAPAM水溶液的疏水缔合有一定的促进作用。     

离子液体中AM/AMPS/N8AM三元共聚物的合成及溶液性能

以丙烯酰胺(AM)和2-丙烯酰胺基-2-甲基丙磺酸(AMPS)为亲水单体, 以N-辛基丙烯酰胺(N8AM)为疏水单体, 在离子液体[bmim]BF4中实现了疏水缔合丙烯酰胺三元共聚物的合成.     

表活性单体NaAMCnS及其聚合物的合成及性能研究

针对疏水缔合聚合物水溶性不足的问题，本文合成了三种含烷基磺酸根的阴离子型表面活性单体2-丙烯酰胺基辛烷基磺酸钠（NaAMC₈S）、2-丙烯酰胺基十二烷基磺酸钠(NaAMC₁₂S)和2-丙烯酰胺基十八烷基磺酸钠(NaAMC₁₈S),通过氢谱、碳谱、高分辨质谱对其结构进行了表征。通过表面张力法和电导率法测定了NaAMC₈S和NaAMC₁₂S的临界胶束浓度；用荧光探针技术研究了其增溶作用；以偶氮二异丁脒盐酸盐（AIBA）为引发剂，在水溶液中研究了丙烯酰胺（AM）分别与NaAMC₈S、NaAMC₁₂S的二元共聚反应，通过控制AM与NaAMC₈S、NaAMC₁₂S的投料比制备得到两个系列聚合物P（AM/NaAMC₈S）、P(AM/NaAMC₁₂S),研究了表面活性单体含量对聚合物疏水缔合作用及耐温抗盐性能的影响。实验结果表明，NaAMC₈     

AM/DMC/C11AM疏水缔合聚两性电解质的合成、表征与溶液性质

通过Ritter反应合成弱阴离子型疏水单体丙烯酰胺基十一烷基酸(C11AM). 以丙烯酰胺(AM)、甲基丙烯酰氧乙基三甲基氯化铵(DMC)和丙烯酰胺基十一烷基酸(C11AM)为原料, 在水介质中合成新型疏水缔合聚两性电解质AM/DMC/C11AM. 利用1H NMR确证了疏水单体和共聚产物的分子结构. 流变性和芘荧光探针的研究结果表明, AM/DMC/C11AM系列疏水缔合聚两性电解质由于兼具疏水缔合性质和反聚电解质效应, 使其具有较好的耐盐性能.     

Novel hydrophobically associative polyacrylamide with tunable viscosity

Hydrophobically associative polyacrylamide(HAPAM) were prepared in aqueous solution by radical copolymerization of novel cationic surface-active monomer,dimethylhexadecyl(3-acrylamidopropyl)ammonium bromide(DMHAB),with acrylamide(AM) in the presence of DMHAB/CTAB mixed micelles.The length of hydrophobic microblock(N_H) in HAPAM is controlled by the molar fraction of DMHAB in mixed micelles,which can be mediated by the ratio of CTAB to DMHAB.The results of steady-state fluorescence probe and viscometry ex...     

Fluorocarbon-containing Hydrophobically Associating Polymers: II Synthesis and Characterization of Terpolymer of Acrylamide,Acryloyloxyethyl Trimethyl Ammonium Chloride and (N-ethyl perfluorooctane sulfoamido) Ethyl Acrylate

Flurocarbon-modified hydrophobically associating terpolymers have been prepared via copolymerization of acrylamide (AM), acryloyloxyethyl trimethyl ammonium chloride (DMAEA-Q) and a small amount of flurocarbon-containing acrylate (RFA) as a hydrophobic third monomer. Three series of terpolymers (AM/DMAEA/Q molar ratio 70/30, 50/50 and 30/70 with various amounts of RFA) were synthesized and the rheological properties of terpolymer solutions were studied. A pronounced hydrophobic association between the fluorocarbon groups in the terpolymer's solutions was observed. The solutions showed pseudoplastic behavior. Evidence for hydrophobic aggregation between the fluorocarbon groups was observed from the viscosity versus concentration profile, effects of shear rate and the addition of NaCl and surfactants on the viscosity of terpolymer solutions. © 1997 John Wiley & Sons, Ltd.     

Microstructure and association property of hydrophobically modified polyacrylamide of a new family

A new family of hydrophobically modified polyacrylamides was synthesized via copolymerization of acrylamide (AM) and anionic surface-active monomer of acrylamide-type, sodium 2-acrylamido-tetradecane sulfonate (NaAMC₁₄S), in aqueous solution. In the copolymerization, by varying various factors, such as the feed ratio of NaAMC₁₄S to AM and the amount of added electrolyte NaCl and initiator, we prepared copolymers NaAMC₁₄S/AM with different block structures. The relationship between structures and hydrophobic association properties of copolymer chains was studied by using fluorescence probe and viscosimetry. Effects of the content and length of the hydrophobic blocks and the total molecular weight on hydrophobic association of the copolymers in pure water and in brine solution were examined, respectively. The results show that in pure water, hydrophobic association of the copolymers was enhanced as the content and length of the hydrophobic block increase. On the other hands, for a given content and length of the hydrophobic block, the hydrophobic association of the copolymers was enhanced as the total molecular weight increases. For all the copolymers studied, the apparent viscosity of their solutions in pure water has a limited value, but the apparent viscosities of the copolymer brine solutions are much higher than that of their corresponding water solutions, and show strong positive salinity sensitivity. Similarly, the hydrophobic association of the copolymer in brine solutions was enhanced as the content and length of the hydrophobic block increase.     

An Alternative Way towards Preparation of Hydrophobically Associating Polyacrylamide:Chemical Post-Modification

Hydrophobically associating polyacrylamides (HAPAMs) are derivatives from polyacrylamides by incorporating a small amount of hydrophobic moieties along the water-soluble mainchain. They are now becoming a class of promising candidates as thickeners or rheology modifiers in the formulations where rheology is necessary to be regulated, such as tertiary oil recovery, drilling fluids, hydraulic fracturing and coatings. Due to association of hydrophobes in nano-domains, their aqueous solutions exhibit very interesting rheological properties and better stability against salts than the unmodified precursor, polyacrylamide.Generally, there are two synthetic routes to introduce hydrophobic portion onto water-soluble polymer chains; i.e., direct copolymerization of hydrophobic and hydrophilic monomers, and post-polymerization functionalization[1]. In the case of HAPAM polymers, a commonly accepted method is micellar copolymerization in which an appropriate surfactant is employed to solubilize both monomers. However, it is widely reported[2] that the obtained polymers via micellar polymerization are characterized by: (i) blocky distribution of the hydrophobes; (ii) compositional inhomogeneity and (iii) strong dependence of solution properties on the block length.In this work, the alternative process, i.e., chemical post-modification, is employed to synthesize HAPAM polymers by direct N-alkylation of parent polyacrylamide (Figure 1) in dimethyl sulfoxide[3,4].PAM HAPAMFig. 1 Schematic route to prepare HAPAM by direct N-alkylation of PAMIt is found that the final incorporation of hydrophobic groups is in good agreement with the feed ratio[4], in contrast with that from micellar copolymerization which always brings about composition drift. Furthermore, unique rheological responses to shear rate, salt, temperature are also evidenced[5].     

表面活性含氟单体-丙烯酰胺共聚物溶液性质研究

以异佛尔酮二异氰酸酯(IPDI)、十二氟庚醇(FOH)、烯丙基聚乙二醇(APEG)合成的表面活性含氟单体(FSM)与丙烯酰胺通过水溶液聚合,制备出含氟疏水缔合聚丙烯酰胺(FPAM).用表面张力法研究了FSM的胶束化,用流变仪、动态激光光散射(DLS)和原子力显微镜(AFM)表征了FPAM溶液的流变性能、缔合结构尺寸和形态.结果表明,FSM在25℃下CMC为1.28 g.L-1,表面张力为26.77 mN.m-1.FPAM溶液属于假塑性体系,临界缔合浓度为0.660%,具有一定的耐盐性.DLS和AFM表明,在低于临界缔合浓度时FPAM溶液仍能产生大量的缔合结构,FPAM分子具有很强的疏水缔合性.     

含树枝体疏水缔合聚合物——聚醚树枝体改性聚丙烯酰胺的合成和性质

疏水缔合聚合物是一类含有少量疏水基团的水溶性功能高分子.在水溶液中,这类聚合物在疏水作用驱动下容易发生缔合,并伴随产生独特的缔合行为和溶液性质,因此研究这类聚合物具有重要的理论和应用意义.     

新型疏水缔合丙烯酰胺/2-苯氧乙基丙烯酸酯共聚物的合成与性质

采用胶束共聚方法合成了一种新型的疏水缔合共聚物 ,它由丙烯酰胺 (AM)和少量的 2 苯氧乙基丙烯酸酯 (POEA) (<1 0mol% )组成 ,具有良好的水溶性 .当溶液浓度超过一定值c 后 ,由于分子间的疏水缔合 ,产生很大的增粘作用 .研究了不同聚合条件下包括单体浓度、投料比和SMR值对聚合物的结构和性能的影响 .实验结果表明 ,聚合物的粘度性质和缔合行为取决于其分子量的大小、疏水单体含量及其嵌段的长度和分布 .