高效可回收聚(4-乙烯基吡啶)高氯酸催化剂用于合成双香豆素和双吲哚(英文)

Poly(4-vinylpyridinium) perchlorate has been used as an efficient solid acid catalyst for the synthesis of 3,3'-(arylmethylene)bis(4-hydroxycoumarins) and bis(indolyl)methanes, with the products being formed in excellent yields over very short reaction times under mild and environmentally friendly conditions. This catalyst can be reused several times without any appreciable loss in its activity.     

Tetramethylguanidino‐tris(2‐aminoethyl)amine: A novel ligand for copper‐based atom transfer radical polymerization

With CuBr/tetramethylguanidino‐tris(2‐aminoethyl)amine (TMG₃‐TREN) as the catalyst, the atom transfer radical polymerization (ATRP) of methyl methacrylate, n‐butyl acrylate, styrene, and acrylonitrile was conducted. The catalyst concentration of 0.5 equiv with respect to the initiator was enough to prepare well‐defined poly(methyl methacrylate) in bulk from methyl methacrylate monomer. For ATRP of n‐butyl acrylate, the catalyst behaved in a manner similar to that reported for CuBr/tris[2‐(dimethylamino)ethyl]amine. A minimum of 0.05 equiv of the catalyst with respect to the initiator was required to synthesize the homopolymer of the desired molecular weight and low polydispersity at the ambient temperature. In the case of styrene, ATRP with this catalyst occurred only when a 1:1 catalyst/initiator ratio was used in the presence of Cu(0) in ethylene carbonate. The polymerization of acrylonitrile with CuBr/TMG₃‐TREN was conducted successfully with a catalyst concentration of 50% with respect to the initiator in ethylene carbonate. End‐group analysis for the determination of the high degree of functionality of the homopolymers synthesized by the new catalyst was determined by NMR spectroscopy. The isotactic parameter calculated for each system indicated that the homopolymers were predominantly syndiotactic, signifying that the tacticity remained the same, as already reported for ATRP. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5906–5922, 2005     

Vanadium alkoxide catalyzed polymerization of vinyl chloride

The polymerization of vinyl chloride (VC) with vanadium complex/alkylaluminum catalyst was investigated. In the case of polymerization with vanadium oxytriethoxide (VO(OEt)₃), poly(vinyl chloride) was obtained in a good yield. The effect of cocatalyst, solvent, and cocatalyst/precatalyst ratio was observed. The structure of the polymer obtained with VO(OEt)₃/i‐Bu₃Al catalyst consisted of regular head‐to‐tail sequence and isobutyl chain‐end structure. VO(OEt)₃/alkylaluminum catalyst was able to copolymerize VC with styrene, 1‐butene, methyl methacrylate, and methyl acrylate. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

甲烷氧化偶联Na2WO4-Mn/SiO2催化剂热效应的研究

采用固定床微型反应装置,研究了甲烷氧化偶联反应过程中Na2WO4-Mn/S iO2催化剂床层的热效应和催化性能的关系,考察了反应炉温、CH4/O2比和反应气体空速对催化剂床层热点分布的影响.研究结果表明,甲烷氧化偶联催化剂床层的热效应强烈依赖于反应条件.反应炉温越高,CH4/O2比越低,反应气体空速越大,催化剂床层的热点温度越高.结合催化性能和热效应关系的研究,为优化甲烷氧化偶联的反应操作提供了实验依据.     

Pd/Mg(Al)O催化剂上NOx的储存 还原

采用共沉淀-浸渍法制备了催化剂Pd/Mg(Al)O，并用XRD、TPD等手段进行了表征。考察了催化剂的NOx储存 还原性能。结果表明，NO在Pd/Mg(Al)O上的主要储存途径是Pd促进NO氧化生成NO2，NO2与Mg(Al)O作用成盐，放出NO；Pd对NO2吸附成盐影响不大。NO在Pd/Mg(Al)O上吸附储存的适宜温度为350℃。350℃下Pd/Mg(Al)O催化剂经15次储存 还原（以H2为还原剂），NOx储存量变化不超过8％，维持在300μmol·g－1以上，N2选择性维持在94％以上。     

Facile Synthesis of Tris(alkoxydimethylsilyl)methane Derivatives via Alcoholysis Under Open-Flask and Mild Conditions

The reactions between a variety of functionalized alcohols and tris(dimethylsilyl)methane, (HMe₂Si)₃CH, are described. Alcohols such as ethylene glycol monobutyl ether, ethylene glycol monoethyl ether, triethylene glycol monomethyl ether, 2-chloroethanol, 1-octanol, benzyl alcohol, glycidol, and allyl alcohol were converted in the presence of Karstedt's catalyst into the corresponding tris(alkoxydimethylsilyl)methanes, (ROMe₂Si)₃CH, in a convenient one-pot operation under aerobic conditions. The appearance of the products coincides with the generation of colloidal Pt(0) species. Moreover, poly(4-chloromethyl)styrene containing tris(dimethylsilyl)methyl groups reacts with benzyl alcohol or 2-chloroethanol in the presence of Karstedt's catalyst to give new macromolecules bearing tris(alkoxydimethylsilyl)methyl groups. The reaction rate is greatly influenced by the concentration of catalyst.     

Polymer-Supported 4-Aminoformoyldiphenylammonium Triflate (PS-AFDPAT): An Effective and Recyclable Catalyst for the Biginelli Reaction

Polymer-supported 4-aminoformoyldiphenylammonium triflate (PS-AFDPAT) was used as an effective catalyst for the synthesis of 3,4-dihydropyrimidin-2(1H)-ones (DHPMs) via the Biginelli reaction. This immobilized catalyst could be easily recovered by simple filtration and recycled for 10 runs without significant decrease of the catalytic activity.     

A highly regioselective bisselenation of allenes with diphenyl diselenide catalyzed by tetrakis(triphenylphosphine)palladium(0)

Tetrakis(triphenylphosphine)palladium(0) acts as an effective catalyst for highly regioselective bisselenation of allenes with diphenyl diselenide.     

脂肪醇聚氧乙烯醚羟值的检测方法的改进

以4-二甲氨基吡啶为催化剂,过量乙酸酐为乙酰化试剂,吡啶为溶剂,用电位滴定法快速测定脂肪醇聚氧乙烯醚(AEO)的羟值,并对催化剂、反应条件、系统的适应性进行了探讨。用该方法对5种不同羟值的AEO样品进行了测定,测定结果的相对标准偏差0.5%(n=6),且测定结果与国标法测定结果的相对误差在±1%之内。     

Hafnium(Ⅳ) bis(perfluorooctanesulfonyl)imide complex catalyzed direct amidomethylation for the synthesis of 1-(arylamido)-methyl-2-naphthols in fluorous medium

Hafnium(Ⅳ) bis(perfluorooctanesulfonyl)imide complex is found to be an efficient catalyst for the multicomponent condensation ofβ-naphthol,aromatic aldehydes and urea or amides in perfluorodecalin to afford the corresponding substituted amidomethyl naphthols in good yields.The remarkable features of this new procedure are high yields,shorter reaction times, reusability of catalyst and simple work-up procedures.     

Oxygenation of sulfides catalysed by SBA‐15‐immobilized molybdenum(VI) complex of a bis(phenol) diamine ligand using aqueous hydrogen peroxide as a green oxidant

A highly efficient and reusable molybdenum‐based catalyst has been synthesized by covalent grafting of a bis(phenol) diamine ligand, namely 2‐(((2‐bromoethyl)(2‐((3,5‐di‐tert‐butyl‐2‐hydroxybenzyl)amino)ethyl)amino)methyl)‐4,6‐di‐tert‐butylphenol, onto functionalized ordered mesoporous silica (SBA‐15) followed by complexation with MoO₂(acac)₂. The resulting organic–inorganic hybrid material was found to be a highly effective catalyst for oxygenation of various sulfides to their corresponding sulfoxides or sulfones. The catalyst was characterized using transmission and scanning electron microscopies, X‐ray photoelectron, Fourier transform infrared and atomic absorption spectroscopies, Brunauer–Emmett–Teller surface area analysis and thermogravimetric analysis. Mild reaction conditions, high selectivity and easy recovery and reusability of the catalyst render the presented protocol very useful for addressing industrial needs and environmental concerns.     

Mg(ClO4)2催化2-取代-4-甲酰基-1,2,3-三唑与β-环己二酮的缩合反应

在Mg(ClO4):催化下,2-取代-4-甲酰基-1,2,3-三唑代替传统的芳香醛与β-环己二酮在乙腈介质中进行缩合反应生成氧杂葸,反应时间为5～6 h,产率75%～86%.该方法具有操作简便、反应时间短及产率高等优点,为此类化合物的合成提供了一种有效的新方法.在没有催化剂的体系中,反应生成的是氧杂蒽开环产物.     

胺基功能化ZPS-PVPA固载手性MnⅢ(salen)的合成及不对称催化烯烃环氧化

以聚(苯乙烯-苯乙烯基膦酸)-磷酸氢锆(ZPS-PVPA)为催化剂载体, 通过3-氨丙基三甲氧基硅烷对其中无机磷酸氢锆的羟基进行修饰, 再与均相手性Mn^Ⅲ(salen)催化剂进行轴向配位固载, 实现了手性均相催化剂的非均相化. 催化剂的表征结果证实制得了非均相催化剂. 随后, 考察了该非均相催化剂对α-甲基苯乙烯、 苯乙烯以及茚不对称环氧化反应的催化性能. 结果表明, 以间氯过氧苯甲酸(m-CPBA)为氧化剂, 在 0 ℃反应 3 h, 催化剂用量为 0.03 mmol, 在轴向配体 N-甲基吗啉氮氧化物(NMO)的参与下, 催化剂能高效催化α-甲基苯乙烯的不对称环氧化, 反应的对映选择性(e. e.值)可达 91.5%, 转化率为 99%. 此外, 以茚为底物考察了催化剂的循环使用性能, 结果表明, 催化剂重复使用10次后, 反应的e. e.值(>90%)远高于在相同条件下均相Mn^Ⅲ(salen)催化剂催化茚反应的e. e.值(65%).     

Ruthenium(III) catalyzed oxidation of hexacyanoferrate(II) by periodate in aqueous alkaline medium

Ruthenium(III) catalyzed oxidation of hexacyanoferrate(II) by periodate in alkaline medium is assumed to occurvia substrate-catalyst complex formation followed by the interaction of oxidant and complex in the rate-limiting stage and yield the products with regeneration of catalyst in the subsequent fast step. The reaction exhibits fractional order in hexacyanoferrate(II) and first-order unity each in oxidant and catalyst. The reaction constants involved in the mechanism are derived.     

Bromamine-T mediated aziridination of olefins with a new polymer supported Manganese(II) complex as catalyst

Chloromethylated styrene-divinyl benzene of 8% cross-link was functionalized using o-phenylene diamine and finally it was treated with Mn(II) for the formation of metal complex on the surface. The metal content was estimated using atomic absorption spectroscopy. The thermal stability of the catalyst was seen by the use of DTA-TG analyses and the catalyst was found to be stable up to ˜125°C. The modern spectroscopic methods such as FT-IR, ESR were used in order to confirm the probable structure of the catalyst. The catalytic activity of this supported Mn(II)-complex was investigated for aziridination of olefins with bromamine-T as the source of nitrogen. The catalyst was found to be effective in this reaction and could be reused with no substantial loss of activity for up to three cycles.     

异丙醇羧酸铝催化合成呋喃酚反应研究

选择了异丙醇羧酸铝催化2-(2-甲基烯丙氧基)苯酚合成呋喃酚；探讨异丙醇羧酸铝用量对合成呋喃酚反应的影响.实验结果表明,异丙醇羧酸铝可高效催化2-(2-甲基烯丙氧基)苯酚合成呋喃酚.当催化剂为异丙醇二乙酸铝,用量为2-(2-甲基烯丙氧基)苯酚的2.50％(物质的量比),呋喃酚的收率达到80.8％,高于目前工业上以异丙醇铝为催化剂的78.3％,具有应用价值.     

SUPPORTED ZIEGLER-NATTA CATALYSTS FOR ETHYLENE SLURRY POLYMERIZATION AND CONTROL OF MOLECULAR WEIGHT DISTRIBUTION OF POLYETHYLENE

The effect of chemical composition of highly active supported Ziegler-Natta catalysts with controlled morphology on the MWD of PE has been studied.It was shown the variation of transition metal compound in the MgCl_2-supported catalyst affect of MWD of PE produced in broad range:Vanadium-magnesium catalyst(VMC)produce PE with broad and bimodal MWD(M_w/M_n=14-21).MWD of PE,produced over titanium-magnesium catalyst(TMC)is narrow or medium depending on Ti content in the catalyst(M_w/M_n=3.1-4.8).The oxidati...     

固体酸催化二氟二苯甲酮和苯胺缩合合成N-(双(4-氟苯基)亚甲基)苯胺

以固体酸为催化剂,4,4’-二氟二苯甲酮与苯胺脱水缩合,合成了N-(双(4-氟苯基)亚甲基)苯胺.比较了不同固体酸催化剂H型ZSM-5、Na型ZSM-5、介孔分子筛MCM-41(Al)及强酸型离子交换树脂Amberlyst 15的催化效果.使用比表面、NH3-TPD对催化剂进行了表征,并与催化效果关联.考察了催化剂用量、原料摩尔比、浓度及溶剂等反应条件对产物收率的影响.产物通过熔点、核磁共振谱进行了表征.结果表明,HZSM-5固体酸催化剂具有优异的催化作用.在优化条件下,以对二甲苯为反应溶剂和脱水剂,4,4’-二氟二苯甲酮0.1 mol,苯胺0.2 mol,催化剂用量2.0 g,反应24 h,产物收率达91%.此外,催化剂易于分离,能够重复使用多次.     

Role of polycation promoters in the cobalt(II) phthalocyaninetetracarboxylic and -octacarboxylic acid-catalyzed autoxidation of mercaptoethanol

The promoting effects of 2,4-ionene on the cobalt(II) phthalocyaninetetracarboxylic acid-[CoPc(COOH)₄] and cobalt(II) phthalocyanineoctacarboxylic acid-[CoPc(COOH)₈] cata-lyzed autoxidation of 2-mercaptoethanol were studied. Dimerization of the CoPc(COOH)₄ catalyst, combined with the disappearance of the catalytically inactive μ-peroxo complex and the appearance of substrate enrichment in the presence of 2,4-ionene, results in a 40-fold enhancement of the oxidation rate as compared with the polymer-free system. UV-VIS spectroscopy indicates that CoPc(COOH)₈ is incapable of forming μ-peroxo complexes or 2,4-ionene-induced dimeric catalyst species under normal reaction conditions. Thus, it was possible to study exclusively the ionene-induced effect of substrate enrichment. Addition of 2,4-ionene to an aqueous CoPc(COOH)₈ solution results in an activity enhancement by a factor of 2-3, which can be ascribed to substrate enrichment. Additionally, using mono-disperse ionene oligomers showed a molecular weight dependence of 2,4-ionene on the catalytic activity of CoPc(COOH)₈, as was observed for the conventional 2,4-ionene/cobalt phthalocyaninetetrasodiumsulfonate system. The optimal polycation/catalyst ratios of both systems decrease with increasing chain length of 2,4-ionene, until a constant value is reached. This leads to the conclusion that the optimal polymer/catalyst ratios are predominantly determined by substrate enrichment. © 1995 John Wiley & Sons, Inc.     

Sustainable synthesis of quinolines (pyridines) catalyzed by a cheap metal Mn(I)-NN complex catalyst

This study represents the first example of a bidentate phosphine-free manganese(I)-NN complex catalyst for the synthesis of quinolines (pyridines) through acceptorless dehydrogenative condensation of various secondary alcohols with amino alcohols. The coupling reactions occurred at 3 mol% catalyst loading and 110°C, and tolerated diverse functional groups. Moderate to excellent yields ranging from 45% to 89% were achieved after 12 hr of reaction. The present protocol provides a concise and environmentally friendly method for the construction of heterocyclic compounds.