泡沫Al阻尼性能研究

通过测定不同频率、温度和应变振幅下的内耗，研究了泡沫Al的阻尼性能.泡沫Al组织中孔洞对阻尼的贡献是使背景内耗特别是高温背景内耗增加.泡沫Al阻尼的另一个特点是较为显著的振幅效应，这一效应随孔径减小而变得更加突出，由于泡沫Al所特有的非均质性孔洞组态和高密度缺陷，应力应变分布极不均匀，加上外部应力的干扰，造成缺陷密度增加，因此缺陷阻尼是主要的阻尼机制. 关键词：     

水下爆炸冲击波在含吸收层结构中的传播规律的数值模拟

 利用ANSYS/LS-DYNA软件,对水下爆炸冲击波在含有吸收层的多层结构中的传播规律进行了数值模拟。结果表明：冲击波在吸收层中的衰减是由泡沫材料自身的本构引起的;在含泡沫材料吸收层的结构中峰值压力仅为不含吸收层的14%,冲击波传播波形发生改变;在含有泡沫混凝土的多层结构中应力波峰值的下降幅度比含泡沫铝的大,但冲击波传播波形的变化不是很明显;泡沫混凝土中的总能量大于泡沫铝中的总能量,因此泡沫混凝土作为防护吸收层要优于泡沫铝。     

泡沫Al压缩形变及能量吸收特征

通过考察两种基体泡沫Al(分别为脆性和塑性)单向压缩应力-应变曲线，探讨了其形变和能量吸收特征及机理，得到了一些与以往不同的研究结果.研究发现，与其他多孔固体材料一样，泡沫Al的压缩形变过程也经历三个区域，即线性弹性区、平台区和致密化区；泡沫Al的吸能本领随屈服强度的提高而增强；在屈服强度相近的情况下，脆性泡沫Al的吸能本领高于塑性泡沫Al；泡沫Al吸能效率峰值对应于较低的应变值(约为0.15—0.25)；吸能效率峰值对基体成分和状态不敏感，随密度增加，吸能效率峰值呈下降趋势. 关键词：     

Effects of ultrasound on polymeric foam porosity

A variety of materials require functionally graded cellular microstructures whose porosity is engineered to meet specific applications (e.g. mimic bone structure for orthopaedic applications; fulfil mechanical, thermal or acoustic constraints in structural foamed components, etc.). Although a huge variety of foams can be manufactured with homogenous porosity, there are no generic processes for controlling the distribution of porosity within the resulting matrix. Motivated by the desire to create a flexible process for engineering heterogeneous foams, the authors have investigated how ultrasound, applied during the formation of a polyurethane foam, affects its cellular structure. The experimental results demonstrated how the parameters of ultrasound exposure (i.e. frequency and applied power) influenced the volume and distribution of pores within the final polyurethane matrix: the data demonstrates that porosity (i.e. volume fraction) varies in direct proportion to both the acoustic pressure and frequency of the ultrasound signal. The effects of ultrasound on porosity demonstrated by this work offer the prospect of a manufacturing process that can adjust the cellular geometry of foam and hence ensure that the resulting characteristics match the functional requirements.     

多层介质对应力波传播特性影响分析

 通过在气炮上进行多层介质的低速冲击实验及相应的数值计算，分析了不同组成的多层介质对应力波传播特性的影响。结果表明：多层介质中的泡沫材料不仅能够改变应力波的幅值与作用时间，而且具有显著的吸能效果，引起应力波在传播过程中在各层介质中能量与动量分配的改变。通过对泡沫铝和泡沫混凝土两种软材料在多层介质中作用的比较表明，在低速冲击的实验条件下，含泡沫混凝土的多层介质具有较好的削波作用，含泡沫铝的多层介质具有较好的吸能性能。     

Optimization of locally resonant acoustic metamaterials on underwater sound absorption characteristics

The study of acoustic metamaterials, also known as locally resonant sonic materials, has recently focused on the topic of underwater sound absorption. The high absorption occurs only within a narrow frequency band around the locally resonant frequency. Nevertheless, this problem can be addressed through a combination of several acoustic metamaterial layers that have different resonant frequencies. In this paper, an optimization scheme, a genetic and a general nonlinear constrained algorithm, is utilized to enhance the low-frequency underwater sound absorption of an acoustic metamaterial slab with several layers. Both the physical and structural parameters of the acoustic metamaterial slab are optimized to enlarge the absorption band. In addition, the sound absorption mechanism of the acoustic metamaterial slab is also analyzed. The result shows that each layer is found to oscillate as a nearly independent unit at its corresponding resonant frequency. The theoretical and experimental results both demonstrate that the optimized metamaterial slab can achieve a broadband (800–2500 Hz) absorption of underwater sound, which is a helpful guidance on the design of anechoic coatings.     

泡沫铝的低频内耗特征研究

采用粉末冶金发泡法制备的泡沫铝试样，研究了室温下低频范围（0.04—4Hz）泡沫铝的内耗与孔结构（孔隙率和孔径）、频率、振幅之间的关系．结果表明泡沫铝的内耗具有以下特征：孔径一定时，内耗随孔隙率的增加而增大；孔隙率一定时，内耗随孔径的减小而增大；在测量频率范围内，内耗与频率近似无关；小应变振幅时内耗随振幅的增大而增大，具有正常振幅效应．提出了泡沫铝的内耗产生机制，根据等效夹杂方法和钉扎位错内耗特点进行了理论分析，较理想地解释了实验结果 关键词：     

Characterization of acoustic streaming in water and aluminum melt during ultrasonic irradiation

It is well known that ultrasonic cavitation causes a steady flow termed acoustic streaming. In the present study, the velocity of acoustic streaming in water and molten aluminum is measured. The method is based on the measurement of oscillation frequency of Karman vortices around a cylinder immersed into liquid. For the case of acoustic streaming in molten metal, such measurements were performed for the first time. Four types of experiments were conducted in the present study: (1) Particle Image Velocimetry (PIV) measurement in a water bath to measure the acoustic streaming velocity visually, (2) frequency measurement of Karman vortices generated around a cylinder in water, and (3) in aluminum melt, and (4) cavitation intensity measurements in molten aluminum. Based on the measurement results (1) and (2), the Strouhal number for acoustic streaming was determined. Then, using the same Strouhal number and measuring oscillation frequency of Karman vortices in aluminum melt, the acoustic streaming velocity was measured. The velocity of acoustic streaming was found to be independent of amplitude of sonotrode tip oscillation both in water and aluminum melt. This can be explained by the effect of acoustic shielding and liquid density.     

The acoustic emission of a distributed mode loudspeaker near a porous layer

Experimental and theoretical modeling of the vibro-acoustic performance of a distributed mode loudspeaker (DML) suggest that their acoustic emission can be significantly affected by the presence of a porous layer. The amplitude of the surface velocity of the panel and the acoustic pressure on the porous surface are reduced largely in the vicinity of structural resonances due to the additional radiation damping and visco-thermal absorption phenomenon in the porous layer. The experimental results suggest that a porous layer between a rigid base and a DML panel can considerably alter its acoustic emission in the near field and in the far field. This is illustrated by a reduction in the level of fluctuations in the emitted acoustic pressure spectra. These fluctuations are normally associated with the interference between the sound emitted by the front surface of the speaker and that emitted from the back. Another contribution comes from the pronounced structural resonances in the surface velocity spectrum. The results of this work suggest that the acoustic boundary conditions near a DML can be modified by the porous layer so that a desired acoustic output can be attained.     

Characterization of laser-induced ultrasound signal by reduced graphene oxide thickness and laser intensity

A nanosecond pulse laser generates acoustic waves on a water-material interface. The absorbed beam energy heats and thermoelastically expands the material. The thermoelastic stress of a material is dependent on its absorbance and expansion coefficient. In this work, we used a composite of reduced graphene oxide (RGO) and aluminum thin film to increase the efficiency of conversion from beamed energy to thermoelastic stress. A laser shadowgraph showed enhanced acoustic waves propagating at ~1,500 m/s under water. The effect of RGO on ultrasound generation is examined for different thicknesses of RGO at several laser fluences. The pressure of laser-induced ultrasound on the RGO–aluminum composite was measured to be up to 59 times greater than that produced with an aluminum film alone, and the frequency of laser-induced ultrasound was determined by the thermoelastic response. The strong intensity and broad bandwidth of the laser-induced acoustic wave suggested enhanced repetition time and resolution required for biomedical imaging.     

基于声学超材料的低频可调吸收器

在当今社会,噪声污染已经成为人类健康的一大威胁,如何有效地控制和消除噪声污染一直是科研领域的一个重要话题.本文以开口环嵌套结构为模型,设计并制备了一种声学超材料.通过理论分析、数值模拟和实验测试,发现由于模型内部空腔的强烈耦合共振效应,该超材料可以在低频区域实现接近完美的吸声效应.此外,通过简单地绕轴旋转其内腔开口方向,即可改变该超材料的相对阻抗值,进而在较宽的频带范围内实现对吸收峰位置的可调控制.由于该超材料具有深亚波长的尺寸,因此非常有利于低频吸声器件的小型化和集成化,同时该模型也为宽带吸收器的设计奠定了基础.     

含三聚氰胺多孔材料分层复合介质吸声特性*

三聚氰胺泡沫材料是一种具有高开孔率的多孔材料,具备优良的吸音、防火隔热及环保性能,可以作为吸声材料与弹性板、空腔介质形成复合结构,在建筑、航空、交通工具等工程领域有广泛的应用。该文基于Biot理论和分层介质在交界面处的不同边界条件,建立非均匀复合介质背衬刚性壁面结构的理论声学模型,详细分析了多孔材料布局对复合结构吸声特性的影响。该文理论模型计算的结果与阻抗实验得到的垂直入射吸声系数基本一致,验证了理论模型的正确性。结果表明:在多孔材料前面增加空气层可以改善高频吸声特性;在多孔材料后面增加空气层可以改善复合结构低频吸声特性。通过合理配置多孔材料,可以在应用需求频段上达到满意的吸声效果。     

Current-voltage characteristics of a foamed Bi1.8Pb0.3Sr2Ca2Cu3O x high-temperature superconductor with fractal cluster structure

The influence of the structure of foamed polycrystalline bismuth-based superconductors on their critical currents and current-voltage characteristics is studied. It is found that superconducting foams have a fractal structure, and the fractal dimension of the boundary between the normal and superconducting phases is estimated. The magnetic and transport properties of superconducting foams are investigated, and the current-voltage characteristics are obtained in a wide range of currents. The effect of percolation phenomena on vortex pinning in a foamed superconductor is considered. The current-voltage characteristics of the superconducting foams at the beginning of the resistive transition are found to be in good agreement with a model in which a magnetic flux is assumed to be trapped in the fractal clusters of a normal phase.     

铝与钢摩擦时声发射参数与正压强之间的关系

材料不同,声发射信号的特点不同。为了提高声发射技术在监测摩擦过程中的应用水平,研究不同材料的声发射信号的特点是必要的。本文研究了铝与45钢摩擦时产生的声发射信号的特点,实验研究结果表明:在铝与45钢的摩擦过程中,相对运动速度对于正压力与声发射信号之间的关系有较大的影响;低速下,正压力与声发射信号之间无规律可言;高速下,随着正压力的增加,声发射信号各参数是增加的。     

内置谐振器的轻薄宽频吸声器结构设计与分析*

微穿孔板吸声器的吸声频带相较于亥姆霍兹谐振器更宽,但其低频吸声的实现需要较大的空气背腔,这对结构尺寸有限制的场合存在一定局限性。本文设计了一种轻薄吸声降噪结构(内置亥姆霍兹谐振器的微穿孔板吸声器,简称MPPHR),将微穿孔板吸声器与亥姆霍兹谐振器进行了结合,提升吸声器的低频吸声性能的同时兼具了微穿孔板宽带吸声的优点。首先基于微穿孔板和亥姆霍兹谐振器理论建立了等效电路模型并计算了结构的声阻抗。然后通过有限元对MPPHR的吸声特性进行了参数研究。最后验证了MPPHR的声阻抗模型和有限元仿真的准确性。研究结果表明：MPPHR结构拥有更宽吸声频带,厚度仅为30mm的MPPHR的半吸收频带可达1294Hz,相较于同等厚度下的微穿孔板吸声器宽近500Hz。此外,MPPHR拥有更好的低频吸声效率。     

Generation and detection of acoustic solitons in crystalline slabs by laser ultrasonics

Acoustic solitons have been recently observed in different systems (Si, Sapphire, MgO, alpha-quartz). Such acoustic waves could lead to sub-picosecond acoustic pulses. In this paper, we report on the formation of acoustic solitons in a GaAs crystalline slab. A short picosecond acoustic pulse is generated by absorption of a femtosecond laser pulse in an aluminum thin film deposited on one side of the slab. This strain pulse travels through the sample up to the opposite side where it is detected by a time delayed laser pulse reflected by an aluminum transducer. We use interferometric detection to measure independently the real and imaginary parts of the relative change in optical reflectivity induced by the acoustic pulse. We find that, at low temperature and with a laser pump pulse energy of 10 nJ, an acoustic soliton clearly separates from the acoustic pulse in GaAs slab. The soliton shape is compared with numerical simulations for different excitation conditions. From the very unique properties of solitons, we infer a soliton pulse duration of about 2.3 ps which corresponds to a spatial extent of only 12 nm.     

Acoustic properties of cenosphere reinforced cement and asphalt concrete

A detailed experimental study has been conducted to determine the effect of adding hollow ceramic-micro balloons, also known as cenospheres, on the acoustic properties of cement matrix and asphalt concrete. The motivation for this study was to explore the feasibility of using cenospheres in developing lightweight sound absorbing structural materials. Cement and asphalt concrete specimens with different volume fractions of cenospheres and varying diameter and thickness were tested to determine their acoustic characteristics over the range of frequencies (0-4000 Hz). Experimental results showed that a 40% volume fraction addition of cenospheres to cement matrix increased the Noise Reduction Coefficient by 100%. In contrast to cenosphere rich cement, the sound absorption coefficient of asphalt concrete decreased with an increase of cenosphere, volume fraction.     

吸声材料对水下小平台上矢量传感器声学特性的影响研究

本文围绕粘贴黏弹性吸声材料方法对水下小平台上安装矢量传感器的指向性和测向的影响展开理论分析和实验研究.首先建立了吸声材料和平台结构组成的复合层结构的数学模型,对声波经过复合层结构的声学特性进行了分析,在此基础上利用有限元耦合边界元法对粘贴吸声材料前后的水下小平台上的矢量传感器的声学特性进行研究.通过理论计算和数值分析研究了吸声材料对矢量传感器的各通道的指向性的影响,并计算了覆盖吸声材料前后矢量传感器的测向精度.水池实验验证了分析结果的正确性.     

流体加载下加肋板结构的声辐射特性研究

本文采用有限元和边界元方法对加肋板结构的声辐射进行了计算分析,研究分析了加肋板结构的板厚、板面积、板边长比、肋骨惯性矩和间距、边界条件以及板材和流体介质等对结构辐射声功率的影响,得到了一些有意义的结论,从而为揭示加板结构声辐射规律,降低结构的声辐射提供了一定的依据。