The synthesis of biodegradable polymers with functional side chains

Trifunctional hydroxy-terminated oligomeric polyesters, M_n 500, 1000, and 2000, were prepared by initiating ring-opening copolymerization of δ-valerolactone and ε-caprolactone with glycerol. The prepolymers were converted to crosslinked polyester-urethanes by their reaction with hexane-1,6-diisocyanate in proportions corresponding to 70, 80, 90, and 100% of the hydroxyl content. The moduli of the resulting elastomers varied between 0.12 MPa and 3.83 MPa, and the elongation at break between 60 and 2000%. The residual hydroxyl groups were derivatized by heterogeneous reaction with chloroacetic anhydride or excess hexane-1,6-diisocyanate, and these and further transformations of the functional groups were verified by infrared spectroscopy and electron probe x-ray microanalysis. A second series of hydroxy-substituted elastomers was synthesized by copolymerization of δ-valerolactone, ε-caprolactone, and 4-(t-butyldimethylsilyloxy)-ε-caprolactone, using different amounts of 2,2-bis(caprolacton-4-yl)propane as the crosslinking agent; removal of the t-butyldimethylsilyl group to liberate pendant hydroxyl groups was achieved with acetic acid but not fluoride ion. The hydroxylated polyester (but not the polyesterurethanes) was shown to undergo enzymatic surface erosion in rabbit. The biodegradation data were compared with results previously obtained with low-modulus elastomeric polyesters.     

Ring-opening metathesis polymerization of new α-norbornenyl poly(ε-caprolactone) macromonomers

Poly(ε-caprolactone) (PCL) macromonomers capped by a polymerizable norbornene end-group have been synthesized and (co)polymerized by ring-opening metathesis with formation of graft copolymers and polymacromonomers. α-Norbornenyl PCL macromonomers have been synthesized by ring opening polymerization (ROP) of ε-caprolactone (εCL) initiated by 2-diethylaluminoxymethyl-5-norbornene. Copolymerization of these PCL macromonomers with norbornene and polymerizable derivatives has been catalyzed by the [RuCl₂(p-cymene)]₂ PCy₃/(trimethylsilyl)diazomethane complex yielding a series of poly(norbornene)-graft-poly(ε-caprolactone) copolymers. These new graft copolymers have been characterized by a set of analytical methods, i.e., SEC, ¹H-NMR, FTIR, DSC, and TGA. Furthermore, PCL macromonomers have been polymerized into high molecular weight comb chains of narrow molecular weight distribution (M_w/M_n = 1.10) within high yields (90%). © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2447–2455, 1999     

Synthesis of stereoregular poly[(2S,3S)-benzyl β-3-methylmalate]

The asymmetric lactone (3 S, 4 R)-3-methyl-4-benzyloxycarbonyl-2-oxetanone ( 6 ) was anionically polymerized to give an insoluble, crystalline, highly isotactic polymer with (2 S, 3 S)-benzyl β-3-methylmalate repeating units. Solubility was achieved by copolymerization of 6 with the recemic (R, S)-butyl malolactonate ( 7 ). The semicrystalline copolymer was characterized (M̄_n = 107 000, T_g = 29,6°C, T_m = 161°C, [α] = 1,5 deg · dm⁻¹ · g⁻¹ · cm³) and its stereosequence investigated by ¹³C NMR.     

三氟化硼-乙醚络合物催化γ-戊内酯与ε-己内酯开环共聚的研究

以三氟化硼乙醚络合物为催化剂,进行了γ-戊内酯(γ-VL)与ε-己内酯(ε-CL)的本体开环共聚的研究.采用1H -NMR、13C- NMR证实了所得共聚物的结构,并对共聚物的分子量、组成、熔点等进行了表征.结果表明,在一定的条件下,难以均聚的γ-VL可与ε-CL发生共聚反应,从而在共聚物链结构中引入少量的γVL单元.γVL单元的引入使得共聚物的分子量和熔点下降.由K- T法估算出两种单体共聚的竞聚率分别为r(ε-CL)=17.6,r(γ-VL)=0.0078.     

Anionically prepared poly(ε-caprolactam-co-ε-caprolactone) and poly(ε-caprolactam-co-δ-valerolactone) copolymers: Thermal and mechanical properties

Thermal and representative physico-mechanical properties of newly prepared poly[(ε-caprolactam)-co-(ε-caprolactone)] and poly[(ε-caprolactam)-co-(δ-valerolactone)] copolymers were studied. The copolymers were synthesized by anionic polymerization of ε-caprolactam activated by isocyanate end-capped oligomeric aliphatic polyesters designated as the macroactivators (MAs). Type, concentration and molecular weight of the MAs were varied, which resulted in copolymers with different structure and properties. The impact of the new MAs used in this study on the glass transition temperature and the melting temperature of poly-ε-caprolactam was investigated by DSC. DMTA was used to analyze the effect of copolymerization on the storage modulus (E^′) and tan δ of poly-ε-caprolactam. Conventional and high-resolution TGA data revealed that all the synthesized polyesteramides possess good thermal stability. Mechanical properties were studied by notched impact and tensile testing. According to the experimental data the impact toughness increase with the MA content, being six time higher compared to the poly(ε-caprolactam) in the best situation. Water absorption was also considered in relation to the composition of the copolymers.     

Fully aromatic thermotropic liquid crystalline homopolyesters of 3,4′-benzophenone dicarboxylic acid

A series of fully aromatic, thermotropic homopolyesters, derived from 3,4′-benzophenone dicarboxylic acid and various aromatic diols, was prepared by the melt polycondensation method and examined for thermotropic behavior by a variety of experimental techniques. The aromatic diols used in the study were hydroquinone, 2,6-, 1,4-, 1,5-, 2,3-, and 2,7-naphthalenediol isomers. All of the homopolyesters of 3,4′-benzophenone dicarboxylic acid with aromatic diols (except that with 2,7-naphthalenediol) formed a nematic LC phase in the melt. They had the glass transition temperatures (T_g) in the range of 133–164°C, the melting transitions (T_m) in the range 305–360°C and the high thermal stabilities (T_d) in the range of 410–483°C. The 2,6-naphthalenediol based homopolymer had the highest T_m (360°C) and the 2,3-naphthalenediol based homopolymer had the lowest T_m (305°C) among all of the homopolymers of naphthalenediol isomers. © 1994 John Wiley & Sons, Inc.     

Lipase-catalyzed ring-opening polymerization of α-methyl-δ-valerolactone and α-methyl-ε-caprolactone

Lipase-catalyzed ring-opening polymerization of α-methyl-substituted medium-size lactones, α-methyl-δ-valerolactone and α-methyl-ε-caprolactone, were carried in bulk. Immobilized lipase derived from Candida antarctica is active in the polymerization of both monomers. The polymerization proceeds under mild reaction conditions to give the corresponding aliphatic polyester having a hydroxy group at one end and a carboxylic acid group at the other.     

Lactone polymers. I. Glass transition temperature of poly-ε-caprolactone by means on compatible polymer mixtures

Dynamic mechanical properties determined with a torsion pendulum were used to ascertain the glass transition temperature T_g of poly-ε-caprolactone. By measurements on compatible blends of poly-ε-caprolactone and poly(vinyl chloride), the T_g of amorphous poly-ε-caprolactone was shown to be 202°K at about 1 cps. This is 16°K lower than the T_g of annealed, crystalline polymer. The blend transition data were well fitted by both the Fox and the Gordon-Taylor expressions. The Fox expression was also used to describe the decrease from 233°K of the secondary low-temperature relaxation due to poly(vinyl chloride) by assuming the low temperature relaxation of poly-ε-caprolactone, 138°K, was responsible for the decrease in the blends. The 138°K relaxation due to poly-ε-caprolactone was decreased when more than 50% poly(vinyl chloride) was present.     

Synthesis and Thermal Behavior of Poly(2-hydroxyethoxybenzoate) and Its Copolyesters with ε-caprolactone

Poly(2-hydroxyethoxybenzoate), poly(ε-caprolactone), and random poly(2-hydroxyethoxybenzoate/e-caprolactone) copolymers were synthesized and characterized in terms of chemical structure and molecular mass. The thermal behavior was examined by DSC. All the samples appear as semicrystalline materials; the main effect of copolymerization was lowering in the amount of crystallinity and a decrease of melting temperature with respect to homopolymers. Flory's equation described well the T _m-composition data. Amorphous samples (in the 20–100%2-hydroxyethoxybenzoate unit concentration range) obtained by quenching showed amonotonic decrease of the glass transition temperature T _g as the content of caprolactone units is increased. The Wood's equation described the T _g-composition data well. This revised version was published online in July 2006 with corrections to the Cover Date.     

Development of poly(ε-caprolactone-co-l-lactide) and poly(ε-caprolactone-co-δ-valerolactone) as new degradable binder used for antifouling paint

Copolyesters containing ε-caprolactone and l-lactide or ε-caprolactone and δ-valerolactone at different compositions were synthesized by using tetrabutoxytitane Ti(OBu)₄ at high temperature in bulk. A series of copolyesters were prepared by varying the compositions of both comonomers. These copolymers were characterized by using ¹H NMR, ¹³C NMR, gel permeation chromatography (GPC), differential scanning calorimetry (DSC) and MALDI-TOF mass spectrometry. ¹³C NMR analysis gave an insight on their microstructure. Structural parameters of the copolymers were obtained by calculating the triad sequence fractions. Poly(ε-caprolactone-co-l-lactide) has a more alternate structure than poly(ε-caprolactone-co-δ-valerolactone). The potential use of these copolyesters in antifouling coatings was examined because of their solubility in aromatic solvent and their hydration and hydrolytic degradation. Paints based on these new degradable binders had a good antifouling activity in Atlantic Ocean (France).     

Ring-opening polymerization of degradable polyesters

Medium to high molecular weight random copolymers of 1,5-dioxepan-2-one (DXO) and L-lactide (L-LA) or ε-caprolactone (ε-CL) of different compositions have been investigated. Polymerization was conducted in bulk at 110°C using stannous 2-ethylhexanoate as catalyst. Poly(DXO-co-L-LA) is a hydrolysable material with a glass transition temperature (T_g) ranging from −36 up to 58°C depending on the molar composition. The material exhibited crystallinity as long as the amount of DXO did not exceed 50 weight%. Reactivity ratios were determined to r_L-LA=10 and r_DXO=0.1, giving a more blocky structure than expected in a random copolymer. The copolymer between ε-CL and DXO was shown to be a truly random copolymer by ¹³C NMR, as expected from the reactivity ratios, r_DXO=1.6 and r_ε-CL=0.6. T_g of the material was ranging from −64 up to −39°C. The ability of the poly(DXO-co-ε-CL) to crystallize was retained up to a DXO content of 40 weight%. The melting temperature and crystallinity of both copolymers decrease with increasing amount of DXO. Incorporation of semicrystalline comonomers, L-LA or ε-CL, into the amorphous poly(DXO) creates materials with adjustable properties depending on the molar composition.     

(2‐Hydroxy isobutyric) acid containing poly(glycolic acid): Structure–properties relationship

Poly(glycolic acid) (PGA) and a series of novel random copolymers of PGA containing 2‐hydroxyisobutyrric acid (PGAPHIB) (HIB unit content from 1.5 to 7.4 mol %) were synthesized and characterized in terms of chemical structure and molecular weight. Afterward, the polyesters were examined by thermogravimetric analysis, differential scanning calorimetry, and X‐ray diffraction techniques. The copolymers, which displayed a better thermal stability than PGA, at room temperature appeared as semicrystalline materials: the main effect of copolymerization was a lowering in the amount of crystallinity and a decrease of the melting temperature with respect to homopolymer PGA. Baur's equation described well the T_m‐composition data. X‐ray diffraction measurements allowed the identification of the PGA crystalline structure in all cases. After melt quenching, semicrystalline samples were obtained with the exception of PGAPHIB7.4 copolymer. The introduction of HIB units decreased the crystallization rate compared with pure PGA. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1901–1910, 2010     

Ring-Opening polymerization of ε-caprolactone by rare earth coordination catalysts. I. Characteristics,kinetics, and mechanism of ε-caprolactone polymerization with nd(acac)3.3H2O-ALET3 system

Ring-opening polymerization of ε-caprolactone has been carried out by using rare earth coordination catalysts for the first time. The rare earth compounds, RE(acac)₃.3H₂O, Nd(P₂₀₄)₃, Nd(P₅₀₇)₃, Nd(naph)₃, Nd(BA)₃.2H₂O, etc. (where RE = La, Pr, Nd, Sm, Eu, Gd, Dy, Ho, Er, Lu, Y; acac = acetylacetone; BA = benzoylacetone), combined with trialkyl aluminum, greatly increased the degree of conversion and the molecular weight of poly(ε-caprolactone) (PCL). The influence of reaction conditions on the polymerization of ε-caprolactone catalyzed by the Nd (acac)₃.3H₂O-AlEt₃ system has been examined in detail. The kinetics indicates that the polymerization rate has the first-order in monomer and a half-order in catalyst. The overall activation energy of the ring-opening polymerization amounts to 59.4 kJ/mol. By IR and UV-Vis spectra, ¹H- and ¹³C-NMR data, it is assumed that the ring-opening polymerization of ε-caprolactone catalyzed by the Nd(acac)₃.3H₂O-AlEt₃ system proceeds via complexation of monomer to catalyst, acyl-oxygen cleavage insertion propagation mechanism. © 1994 John Wiley & Sons, Inc.     

Copolymer Networks From Oligo(ε‐caprolactone) and n‐Butyl Acrylate Enable a Reversible Bidirectional Shape‐Memory Effect at Human Body Temperature

Exploiting the tremendous potential of the recently discovered reversible bidirectional shape‐memory effect (rbSME) for biomedical applications requires switching temperatures in the physiological range. The recent strategy is based on the reduction of the melting temperature range (ΔT _m) of the actuating oligo(ε‐caprolactone) (OCL) domains in copolymer networks from OCL and n‐butyl acrylate (BA), where the reversible effect can be adjusted to the human body temperature. In addition, it is investigated whether an rbSME in the temperature range close or even above T_m,offset (end of the melting transition) can be obtained. Two series of networks having mixtures of OCLs reveal broad ΔT_ms from 2 °C to 50 °C and from −10 °C to 37 °C, respectively. In cyclic, thermomechanical experiments the rbSME can be tailored to display pronounced actuation in a temperature interval between 20 °C and 37 °C. In this way, the application spectrum of the rbSME can be extended to biomedical applications.

     

Synthesis and Thermal Properties of Biodegradable Poly(ester‐urethane)s Based on Chemo‐Synthetic Poly[(R,S)‐3‐hydroxybutyrate]

A series of telechelic oligo[(R,S)‐3‐hydroxybutyrate]‐diols (PHB‐diols) was synthesized from ethyl (R,S)‐3‐hydroxybutyrate (ethyl (HB)) and four different aliphatic diols, namely, 1,4‐butanediol, 1,6‐hexanediol, 1,8‐octanediol and 1,10‐decanediol by transesterification and condensation in bulk. The structures of the synthesized oligomers were confirmed by ¹H NMR spectroscopy and MALDI‐TOF mass spectroscopy. The use of 1,4‐butanediol results in an oligoester with hydroxyl functionality of approximately 2. In the case of the higher aliphatic diols, the number average functionalities were found to be lower than 2. These differences were ascribed to side reactions which occur during polymerization, yielding unreactive end groups. Other novel families of biodegradable poly(ester‐urethane)s were synthesized either from PHB‐diol alone, or PHB‐diol mixed with poly(ε‐caprolactone)‐diol (PCL‐diol), poly(butylene adipate)‐diol (PBA‐diol) or poly(diethylene glycol adipate)‐diol (PDEGA‐diol). In each case, 1,6‐hexamethylene diisocyanate was used as a nontoxic connecting agent. The homopolymers prepared from PCL‐diol, PBA‐diol and PDEGA‐diol were also synthesized for the sake of comparison. All the prepared copolymers possess high molecular weight with glass transition temperature (T_g) values varying from –54 to –23°C. Some of the prepared copoly(ester‐urethane)s are partially crystalline with melting temperatures (T_m's) varying from 37 to 56°C.     

Anionic polymerization of lactones initiated by alkali graphitides. IV. Copolymerization of ε-caprolactone initiated by KC24

The copolymerization of ε-caprolactone (ε-CL) with octamethylcyclotetrasiloxane (D₄) and styrene (St) under the action of the second-stage potassium graphitide KC₂₄ was investigated. The copolymerizations were carried out in bulk or in xylene at 20°C. The content of the block copolymer ε-CL/D₄ in the polymerization mixture was 60–95%, the molecular weight ranging between 150,000 and 300,000. The data for the copolymers' composition obtained by ¹H-NMR and GPC showed 14–20% of D₄-units in the copolymer. The amount of the block copolymer ε-CL/St in the polymerization products was 0–87%, and the molecular weights in the case of copolymer formation were between 100,000 and 500,000. The content of St-units in the copolymers was from 10 to 75% as shown by GPC and ¹H-NMR. The mechanism of action of the initiator is discussed.     

Polyamides from α,ω-oxaalkanedioic acids having long methylene chain units

Three series of polyamides were prepared from diamines (hexamethylenediamine, bis-5-aminoamyl ether, p-xylylenediamine) and α,ω-oxaalkanedioic acids of formula HOOC(CH₂)_mO(CH₂)_nCOOH, where m = n = 3–10, in symmetric structures, but m = 3 or 4 in unsymmetric structures. The melting points of these polymers were plotted against the number of carbon atoms of the oxaalkylene groups. The melting points of polymers from each diamine fell on three different curves according to the structures of the dicarboxylic acids: symmetric ? (CH₂)_nO(CH₂)_n? ; unsymmetric ? (CH₂)₃O(CH₂)_n? , and unsymmetric ? (CH₂)₄O(CH₂)_n? . A minimum melting point is observed at about the same point of the acid structure in every curve of the unsymmetric dicarboxylic acids. The marked depression in the polymer melting points around the minimum point is attributed to the increase of the entropy of fusion.     

Copolymer of lactide and ε-caprolactone catalyzed by bimetallic Schiff base aluminum complexes

A series of copolymers of lactide(LA) and e-caprolactone(ε-CL) with different monomer feed ratios were achieved using three kinds of bimetallic Schiff aluminum complexes as catalysts. The ratios of LA and ε-CL units in different copolymers and the average segments length were determined by NMR analysis. The comparative kinetic study of L-LA/ε-CL and rac-LA/ε-CL copolymerization systems showed that the polymerization rate of LA was faster than ε-CL, and L-LA showed polymerization rate slightly faster than rac-LA. It was inferred that the copolymers achieved by these complexes were gradient copolymers with gradual change in distribution of LA and e-CL units. The thermal properties of these copolymers were characterized by DSC analysis, which showed that the glass transition temperature(Tg) of these copolymers changed regularly according to the pro-portion change of two structural units.     

Functional syndiotactic poly(β‐hydroxyalkanoate)s via stereoselective ring‐opening copolymerization of rac‐β‐butyrolactone and rac‐allyl‐β‐butyrolactone

The copolymerization of racemic β‐butyrolactone (rac‐BL^Me) with racemic “allyl‐β‐butyrolactone” (rac‐BL^allyl) in toluene, catalyzed by the discrete amino‐alkoxy‐bis(phenolate) yttrium‐amido complex 1 , gave new poly(β‐hydroxyalkanoate)s with unsaturated side chains. The poly(BL^Me‐co‐BL^allyl) copolymers produced have a highly syndiotactic backbone structure (P_r = 0.80–0.84) with a random enchainment of monomer units, as evidenced by ¹³C NMR, and high molecular weight (M_n up to 58,000 g mol^?1) with a narrow polydispersity (M_w/M_n = 1.07–1.37), as determined by GPC. The comonomer incorporation (5–50 mol % rac‐BL^allyl) was a linear function of the feed ratio. The pendant vinyl bond of the side‐chains in those poly(BL^Me‐co‐BL^allyl) copolymers allowed the effective introduction of hydroxy or epoxy groups via dihydroxylation, hydroboration‐oxidation or epoxidation reactions. NMR studies indicated that all of these transformations proceed in an essentially quantitative conversion and do not affect the macromolecular architecture. Some thermal properties (T_m, ΔH_m, T_g) of the prepared polymers have been also evaluated. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3177–3189, 2009     

Effect of polymerization catalysts on the microstructure of P(LLA-co-εCL)

The copolymerization of L ,L -lactide and ε-caprolactone was carried out using antimony trioxide and stannous octoate as catalysts. The effect of polymerization catalysts on the physical and the chemical microstructures of this copolymer was investigated by ¹³C NMR and DSC analysis. Antimony trioxide causes more random sequence distribution within the copolymer chain due to its higher transesterification characteristic than stannous octoate. The copolymer samples made with the antimony trioxide catalyst seem to have more amorphous phase structure, than those prepared using stannous octoate which are semicrystalline for the entire compositional range due to blocky copolymer sequences. © 1994 John Wiley & Sons, Inc.