ZIF-8基复合材料高效、稳定电催化还原CO2

电催化CO₂还原反应(eCO₂RR)受到催化剂本征活性以及传质的限制,导致材料的催化活性低、反应起始电位高等问题。我们以类沸石锌盐咪唑骨架(ZIF-8)材料为研究对象,探究了不同粒径ZIF-8材料的eCO₂RR性能。优选粒径为50 nm的ZIF-8材料,进一步引入碳纳米管(CNT)作为其导电基底材料,通过原位生长,构建了复合材料ZIF-8-50@CNT的多级孔结构和疏水界面。eCO₂RR实验结果表明,CNT的引入提高了催化剂的导电性,优化后的复合材料有效地降低了反应的起始电位。在-1.1 V(相对可逆氢电极(RHE))电位下,CO部分电流密度为15.6 mA·cm^-2,ZIF-8-50@CNT催化剂的比表面活性提升了3.5倍(相比ZIF-8-50),塔菲尔斜率降低到136 mV·dec^-1。并且产物CO的选择性和稳定性得到了提高,在宽电势窗口-0.9～-1.2 V(vs RHE)内,CO的法拉第效率(FE)保持在80%以上。在10 h稳定性测试中,催化剂活...     

ZIF-8基复合材料高效、稳定电催化还原CO2

电催化CO₂还原反应(eCO₂RR)受到催化剂本征活性以及传质的限制，导致材料的催化活性低、反应起始电位高等问题。我们以类沸石锌盐咪唑骨架(ZIF-8)材料为研究对象，探究了不同粒径ZIF-8材料的eCO₂RR性能。优选粒径为50 nm的ZIF-8材料，进一步引入碳纳米管(CNT)作为其导电基底材料，通过原位生长，构建了复合材料ZIF-8-50@CNT的多级孔结构和疏水界面。eCO₂RR实验结果表明，CNT的引入提高了催化剂的导电性，优化后的复合材料有效地降低了反应的起始电位。在-1.1 V (相对可逆氢电极(RHE))电位下，CO部分电流密度为15.6 mA·cm^-2，ZIF-8-50@CNT催化剂的比表面活性提升了3.5倍(相比ZIF-8-50)，塔菲尔斜率降低到136 mV·dec^-1。并且产物CO的选择性和稳定性得到了提高，在宽电势窗口-0.9~-1.2 V (vs RHE)内，CO的法拉第效率(FE)保持在80%以上。在10 h稳定性测试中，催化剂活性保持稳定，整体增强了复合材料eCO₂RR的性能。     

Electrochemical Conversion of CO2 to Syngas with Controllable CO/H2 Ratios over Co and Ni Single-Atom Catalysts

The electrochemical CO₂ reduction reaction (CO₂RR) to yield synthesis gas (syngas, CO and H₂) has been considered as a promising method to realize the net reduction in CO₂ emission. However, it is challenging to balance the CO₂RR activity and the CO/H₂ ratio. To address this issue, nitrogen-doped carbon supported single-atom catalysts are designed as electrocatalysts to produce syngas from CO₂RR. While Co and Ni single-atom catalysts are selective in producing H₂ and CO, respectively, electrocatalysts containing both Co and Ni show a high syngas evolution (total current >74 mA cm⁻²) with CO/H₂ ratios (0.23–2.26) that are suitable for typical downstream thermochemical reactions. Density functional theory calculations provide insights into the key intermediates on Co and Ni single-atom configurations for the H₂ and CO evolution. The results present a useful case on how non-precious transition metal species can maintain high CO₂RR activity with tunable CO/H₂ ratios.     

Electrochemical Conversion of CO2 to Syngas with Controllable CO/H2 Ratios over Co and Ni Single‐Atom Catalysts

The electrochemical CO₂ reduction reaction (CO₂RR) to yield synthesis gas (syngas, CO and H₂) has been considered as a promising method to realize the net reduction in CO₂ emission. However, it is challenging to balance the CO₂RR activity and the CO/H₂ ratio. To address this issue, nitrogen‐doped carbon supported single‐atom catalysts are designed as electrocatalysts to produce syngas from CO₂RR. While Co and Ni single‐atom catalysts are selective in producing H₂ and CO, respectively, electrocatalysts containing both Co and Ni show a high syngas evolution (total current >74 mA cm^?2) with CO/H₂ ratios (0.23–2.26) that are suitable for typical downstream thermochemical reactions. Density functional theory calculations provide insights into the key intermediates on Co and Ni single‐atom configurations for the H₂ and CO evolution. The results present a useful case on how non‐precious transition metal species can maintain high CO₂RR activity with tunable CO/H₂ ratios.     

Is Cu instability during the CO2 reduction reaction governed by the applied potential or the local CO concentration?

Cu-based catalysts have shown structural instability during the electrochemical CO₂ reduction reaction (CO₂RR). However, studies on monometallic Cu catalysts do not allow a nuanced differentiation between the contribution of the applied potential and the local concentration of CO as the reaction intermediate since both are inevitably linked. We first use bimetallic Ag-core/porous Cu-shell nanoparticles, which utilise nanoconfinement to generate high local CO concentrations at the Ag core at potentials at which the Cu shell is still inactive for the CO₂RR. Using operando liquid cell TEM in combination with ex situ TEM, we can unequivocally confirm that the local CO concentration is the main source for the Cu instability. The local CO concentration is then modulated by replacing the Ag-core with a Pd-core which further confirms the role of high local CO concentrations. Product quantification during CO₂RR reveals an inherent trade-off between stability, selectivity and activity in both systems.

The stability of bimetallic AgCu and PdCu catalysts for electrochemical CO₂RR is investigated using the combination of operando and ex situ TEM. The local CO concentration is identified as the main link between activity, stability and selectivity.     

Experimental and molecular simulation studies of CO2 adsorption on zeolitic imidazolate frameworks: ZIF-8 and amine-modified ZIF-8

ZIF-8 has been rapidly developed as a potential candidate for CO₂ capture due to its low density, high surface area, and robust structure. Considering the electron-donating effect of amino functional groups, amino-modification is expected to be an efficient way to improve CO₂ adsorption of ZIF-8. In this work, grand canonical Monte Carlo (GCMC) simulation was performed to study the CO₂ adsorption isotherm based on ZIF-8, ZIF-8-NH₂, and ZIF-8-(NH₂)₂. ZIF-8 was synthesized and CO₂ adsorption isotherms based on ZIF-8 was measured. The experimental surface area, pore volume, and CO₂ adsorption isotherm were used to validate the force field. Adsorptive capacity of ZIF-8-NH₂, and ZIF-8-(NH₂)₂ were first estimated. The GCMC simulation results indicated that the order of increasing CO₂ capacity of the ZIF-8 in the lower pressure regime is: ZIF-8 < ZIF-8-NH₂ < ZIF-8-(NH₂)₂, and in the high pressure is: ZIF-8 < ZIF-8-(NH₂)₂ < ZIF-8-NH₂. New adsorption sites can be generated with the existence of-NH₂ groups. In addition, for non-modified and amino-modified ZIF-8, it was the first time to use density functional theory (DFT) calculations to investigate their CO₂ adsorption sites and CO₂ binding energies. The present work indicates that appropriate amine-functionalized can directly enhanced CO₂ capacity of ZIF-8.     

Tailoring Copper Nanocrystals towards C2 Products in Electrochemical CO2 Reduction

Favoring the CO₂ reduction reaction (CO2RR) over the hydrogen evolution reaction and controlling the selectivity towards multicarbon products are currently major scientific challenges in sustainable energy research. It is known that the morphology of the catalyst can modulate catalytic activity and selectivity, yet this remains a relatively underexplored area in electrochemical CO₂ reduction. Here, we exploit the material tunability afforded by colloidal chemistry to establish unambiguous structure/property relations between Cu nanocrystals and their behavior as electrocatalysts for CO₂ reduction. Our study reveals a non‐monotonic size‐dependence of the selectivity in cube‐shaped copper nanocrystals. Among 24 nm, 44 nm and 63 nm cubes tested, the cubes with 44 nm edge length exhibited the highest selectivity towards CO2RR (80 %) and faradaic efficiency for ethylene (41 %). Statistical analysis of the surface atom density suggests the key role played by edge sites in CO2RR.     

Ultrathin two-dimensional triptycence-based metal-organic framework for highly selective CO2 electroreduction to CO

Efficient CO₂ reduction reaction (CO₂RR) is one of the important topics in energy and environment field, but improving the electrochemical selectivity of specific product is a great challenge. Herein, we reported a unprecedented two-dimensional (2D) metal?organic framework with CuO₄ unit (denoted as Cu-HHTT, HHTT = 9,10-dihydro-9,10-[1,2]benzenoanthracene-2,3,6,7,14,15-hexaol) as the electrocatalyst for CO₂RR. Cu-HHTT exhibits high performance for CO₂RR to produce CO, namely Faradaic efficiency of 96.6% toward CO with a current density of 18 mA/cm² at the potential of ?0.6 V vs. RHE. Density function theory reveals that the desorption of CO species exhibits a lower energy barrier than that of hydrogenation of *CO intermediate, resulting in CO as the main product instead of alcohols or hydrocarbons.     

Key factors for designing single-atom metal-nitrogen-carbon catalysts for electrochemical CO2 reduction

The electrochemical CO₂ reduction (CO₂RR) is a sustainable approach to mitigate the increased CO₂ emissions and simultaneously produce value-added chemicals and fuels. Metal-nitrogen-carbon (M-N-C) based single-atom catalysts (SACs) have emerged as promising electrocatalysts for CO₂RR with high activity, selectivity, and stability. To design efficient SACs for CO₂RR, the key influence factors need to be understood. Here, we summarize recent achievements on M-N-C SACs for CO₂RR and highlight the significance of the key constituting factors, metal sites, the coordination environment, and the substrates, for achieving high CO₂RR performance. The perspective views and guidelines are provided for the future direction of developing M-N-C SACs as CO₂RR catalysts.     

Etched ZIF-8 as a Filler in Mixed-Matrix Membranes for Enhanced CO2/N2 Separation

Zeolite ZIF-8 has been etched with acid to form microporous ZIF-8-E crystals. These were then introduced into a polyethersulfone (PES) membrane matrix to enhance its CO₂/N₂ separation performance. Open through pores of size about 100 nm formed in the ZIF-8 crystals allow the ingrowth of polyethersulfone chains, ensuring a reduction in the number of nonselective voids, thereby achieving better interaction between ZIF-8-E and PES. As a result, the CO₂/N₂ separation performance of the ZIF-8-E/PES membrane increased significantly, showing a CO₂ permeability of 15.7 Barrer and a CO₂/N₂ ideal selectivity of 6.5.     

In Situ Bismuth Nanosheet Assembly for Highly Selective Electrocatalytic CO2 Reduction to Formate

The reduction of carbon dioxide (CO₂) into value-added fuels using an electrochemical method has been regarded as a compelling sustainable energy conversion technology. However, high-performance electrocatalysts for CO₂ reduction reaction (CO₂RR) with high formate selectivity and good stability need to be improved. Earth-abundant Bi has been demonstrated to be active for CO₂RR to formate. Herein, we fabricated an extremely active and selective bismuth nanosheet (Bi-NSs) assembly via an in situ electrochemical transformation of (BiO)₂CO₃ nanostructures. The as-prepared material exhibits high activity and selectivity for CO₂RR to formate, with nearly 94% faradaic efficiency at −1.03 V (versus reversible hydrogen electrode (vs. RHE)) and stable selectivity (>90%) in a large potential window ranging from −0.83 to −1.18 V (vs. RHE) and excellent durability during 12 h continuous electrolysis. In addition, the Bi-NSs based CO₂RR/methanol oxidation reaction (CO₂RR/MOR) electrolytic system for overall CO₂ splitting was constructed, evidencing the feasibility of its practical implementation.     

Molecular Evidence for Metallic Cobalt Boosting CO2 Electroreduction on Pyridinic Nitrogen

Nitrogen‐doped carbon materials (N‐C_mat) are emerging as low‐cost metal‐free electrocatalysts for the electrochemical CO₂ reduction reaction (CO₂RR), although the activities are still unsatisfactory and the genuine active site is still under debate. We demonstrate that the CO₂RR to CO preferentially takes place on pyridinic N rather than pyrrolic N using phthalocyanine (Pc) and porphyrin with well‐defined N‐C_mat configurations as molecular model catalysts. Systematic experiments and theoretic calculations further reveal that the CO₂RR performance on pyridinic N can be significantly boosted by electronic modulation from in‐situ‐generated metallic Co nanoparticles. By introducing Co nanoparticles, Co@Pc/C can achieve a Faradaic efficiency of 84 % and CO current density of 28 mA cm^?2 at ?0.9 V, which are 18 and 47 times higher than Pc/C without Co, respectively. These findings provide new insights into the CO₂RR on N‐C_mat, which may guide the exploration of cost‐effective electrocatalysts for efficient CO₂ reduction.     

Highly Efficient Porous Carbon Electrocatalyst with Controllable N-Species Content for Selective CO2 Reduction

We report a straightforward strategy to design efficient N doped porous carbon (NPC) electrocatalyst that has a high concentration of easily accessible active sites for the CO₂ reduction reaction (CO₂RR). The NPC with large amounts of active N (pyridinic and graphitic N) and highly porous structure is prepared by using an oxygen-rich metal–organic framework (Zn-MOF-74) precursor. The amount of active N species can be tuned by optimizing the calcination temperature and time. Owing to the large pore sizes, the active sites are well exposed to electrolyte for CO₂RR. The NPC exhibits superior CO₂RR activity with a small onset potential of −0.35 V and a high faradaic efficiency (FE) of 98.4 % towards CO at −0.55 V vs. RHE, one of the highest values among NPC-based CO₂RR electrocatalysts. This work advances an effective and facile way towards highly active and cost-effective alternatives to noble-metal CO₂RR electrocatalysts for practical applications.     

Designs of Tandem Catalysts and Cascade Catalytic Systems for CO2 Upgrading

Upgrading CO₂ into multi-carbon (C2+) compounds through the CO₂ reduction reaction (CO₂RR) offers a practical approach to mitigate atmospheric CO₂ while simultaneously producing high value chemicals. The reaction pathways for C2+ production involve multi-step proton-coupled electron transfer (PCET) and C−C coupling processes. By increasing the surface coverage of adsorbed protons (*H_ad) and *CO intermediates, the reaction kinetics of PCET and C−C coupling can be accelerated, thereby promoting C2+ production. However, *H_ad and *CO are competitively adsorbed intermediates on monocomponent catalysts, making it difficult to break the linear scaling relationship between the adsorption energies of the *H_ad/*CO intermediate. Recently, tandem catalysts consisting of multicomponents have been developed to improve the surface coverage of *H_ad or *CO by enhancing water dissociation or CO₂-to-CO production on auxiliary sites. In this context, we provide a comprehensive overview of the design principles of tandem catalysts based on reaction pathways for C2+ products. Moreover, the development of cascade CO₂RR catalytic systems that integrate CO₂RR with downstream catalysis has expanded the range of potential CO₂ upgrading products. Therefore, we also discuss recent advancements in cascade CO₂RR catalytic systems, highlighting the challenges and perspectives in these systems.     

Fabricating pyridinic N-B sites in porous carbon as efficient metal-free electrocatalyst in conversion CO2 into CH4

Electrochemical reduction of CO₂ (CO₂RR) to value-added chemicals is an attractive strategy for greenhouse gas mitigation and carbon recycle. Carbon material is one of most promising electrocatalysts but its product selectivity is limited by few modulating approaches for active sites. Herein, the predominant pyridinic N-B sites (accounting for 80% to all N species) are fabricated in hierarchically porous structure of graphene nanoribbons/amorphous carbon. The graphene nanoribbons and porous structure can accelerate electron and ion/gas transport during CO₂RR, respectively. This carbon electrocatalyst exhibits excellent selectivity toward CO₂ reduction to CH₄ with the faradaic efficiency of 68% at −0.50 V vs. RHE. As demonstrated by density functional theory, a proper adsorbed energy of *CO and *CH₂O are generated on the pyridinic N-B site resulting into high CH₄ selectivity. Therefore, this study provides a novel method to modulate active sites of carbon-based electrocatalyst to obtain high CH₄ selectivity.     

Cu cluster embedded porous nanofibers for high-performance CO2 electroreduction

Metal-doped carbon materials, as one of the most important electrocatalytic catalysts for CO₂ reduction reaction (CO₂RR), have attracted increasing attention. Herein, a series of Cu cluster embedded highly porous nanofibers have been prepared through the carbonization of electro-spun MOF/PAN nanofibers. The obtained Cu cluster doped porous nanofibers possessed fibrous morphology, high porosity, conductivity, and uniformly dispersed Cu clusters, which could be applied as promising CO₂RR catalysts. Specifically, best of them, MCP-500 exhibited high catalytic performance for CO₂RR, in which the Faradaic efficiency of CO (FE_CO) was as high as 98% at ?0.8 V and maintained above 95% after 10 h continuous electrocatalysis. The high performance might be attributed to the synergistic effect of tremendously layered graphene skeleton and uniformly dispersed Cu clusters that could largely promote the electron conductivity, mass transfer and catalytic activity during the electrocatalytic CO₂RR process. This attempt will provide a new idea to design highly active CO₂RR electrocatalyst.     

Positive Valent Metal Sites in Electrochemical CO2 Reduction Reaction

The discovery of high-performance catalysts for the electrochemical CO₂ reduction reaction ( CO₂RR) has faced an enormous challenge for years. The lack of cognition about the surface active structures or centers of catalysts in complex conditions limits the development of advanced catalysts for CO₂RR. Recently, the positive valent metal sites (PVMS) are demonstrated as a kind of potential active sites, which can facilitate carbon dioxide (CO₂) activation and conversation but are always unstable under reduction potentials. Many advanced technologies in theory and experiment have been utilized to understand and develop excellent catalysts with PVMS for CO₂RR. Here, we present an introduction of some typical catalysts with PVMS in CO₂RR and give some understanding of the activity and stability for these related catalysts.     

Constructing low-valent Ni nanoparticles for highly selective CO2 reduction

The electroreduction of CO₂（CO₂RR） into value-added chemicals is a sustainable strategy for mitigating global warming and managing the global carbon balance. However, developing an efficient and selective catalyst is still the central challenge. Here, we developed a simple two-step pyrolysis method to confine low-valent Ni-based nanoparticles within nitrogen-doped carbon（Ni-NC）. As a result, such Ni-based nanoparticles can effectively reduce CO₂ to CO, with a max...     

Enhancing Activity and Reducing Cost for Electrochemical Reduction of CO2 by Supporting Palladium on Metal Carbides

Electrochemical CO₂ reduction reaction (CO₂RR) with renewable electricity is a potentially sustainable method to reduce CO₂ emissions. Palladium supported on cost‐effective transition‐metal carbides (TMCs) are studied to reduce the Pd usage and tune the activity and selectivity of the CO₂RR to produce synthesis gas, using a combined approach of studying thin films and practical powder catalysts, in situ characterization, and density functional theory (DFT) calculations. Notably, Pd/TaC exhibits higher CO₂RR activity, stability and CO Faradaic efficiency than those of commercial Pd/C while significantly reducing the Pd loading. In situ measurements confirm the transformation of Pd into hydride (PdH) under the CO₂RR environment. DFT calculations reveal that the TMC substrates modify the binding energies of key intermediates on supported PdH. This work suggests the prospect of using TMCs as low‐cost and stable substrates to support and modify Pd for enhanced CO₂RR activity.     

Highly Efficient Porous Carbon Electrocatalyst with Controllable N‐Species Content for Selective CO2 Reduction

We report a straightforward strategy to design efficient N doped porous carbon (NPC) electrocatalyst that has a high concentration of easily accessible active sites for the CO₂ reduction reaction (CO₂RR). The NPC with large amounts of active N (pyridinic and graphitic N) and highly porous structure is prepared by using an oxygen‐rich metal–organic framework (Zn‐MOF‐74) precursor. The amount of active N species can be tuned by optimizing the calcination temperature and time. Owing to the large pore sizes, the active sites are well exposed to electrolyte for CO₂RR. The NPC exhibits superior CO₂RR activity with a small onset potential of ?0.35 V and a high faradaic efficiency (FE) of 98.4 % towards CO at ?0.55 V vs. RHE, one of the highest values among NPC‐based CO₂RR electrocatalysts. This work advances an effective and facile way towards highly active and cost‐effective alternatives to noble‐metal CO₂RR electrocatalysts for practical applications.