An Efficient Method for the Synthesis of N-Acylsulfonamides: One-pot Sulfonylation and Acylation of Primary Arylamines under Solvent-Free Conditions

Summary. The preparation of N-acylsulfonamides is described using primary amines, arylsulfonyl chlorides and acyl chlorides. Reaction of primary aryl amines with arylsulfonyl chlorides in the presence of NaHCO₃ produced N-arylsulfonamides, which reacted in situ with benzoyl chloride furnishing the corresponding N-benzoyl-N-arylsulfonamides in 72–96% yields. Accordingly, 4-nitrobenzoyl chloride and 3,5-dinitrobenzoyl chloride were used as acylating agents. All the reactions were carried out under solvent-free conditions at room temperature and the products were isolated after simple work-up in high yields and purity.     

Alkaloids from Plants of the Nitraria Genus. Structure of Sibiridine

The new alkaloid sibiridine was isolated from the aerial parts of Nitraria sibirica and N. schoberi. Its structure was established using spectral data and chemical transformations. Its synthesis was carried out.     

光动力化合物5-氨基乙酰丙酸的简便全合成

从γ-丁内酯出发, 首先发生醇解、氧化反应, 继而采用无溶剂法与硝基甲烷在KF/Al₂O₃催化下发生Henry反应, 再经湿Al₂O₃负载的CrO₃氧化得到5-硝基-4-羰基戊酸乙酯, 最后在Pd/C催化下还原得到5-氨基乙酰丙酸. 各步所合成化合物的结构经¹H NMR, IR, MS分析确证.     

Zymomonas mobilis as catalyst for the biotechnological production of sorbitol and gluconic acid

The conversion of glucose and fructose into gluconic acid (GA) and sorbitol (SOR) was conducted in a batch reactor with free (CTAB-treated or not) or immobilized cells of Zymomonas mobilis. High yields (more than 90%) of gluconic acid and sorbitol were attained at initial substrate concentration of 600 g/L (glucose plus fructose at 1:1 ratio), using cells with glucose-fructose-oxidoreductase activity of 75 U/L. The concentration of the products varied hyperbolically with time according to the equations (GA)=t(GA)_max/(W_GA +t), (SOR)=t (SOR)_max/(W_Sor+t), v_GA=[W_GA (GA)_max]/(W_GA+t)² and V_SOR=[W_SOR (SOR)_max]/(W_SOR+t)². Taking the test carried out with free CTAB-treated cells as an example, the constant parameters were (GA)_max= 541 g/L, (SOR)_max=552 g/L, W_GA=4.8h, W_SOR=4.9h, υ_GA=112.7 g/L· and υ_SOR=112.7 g/L·.     

Biotransformation of Valdecoxib by Plant Cell Cultures

Valdecoxib is a new anti-inflammatory drug that is highly selective for inhibition of the inducible form of cyclooxygenase (COX-2). In the present study, biotransformation of valdecoxib was investigated in cell cultures of five medicinal plants, viz., Catharanthus roseus, Azadirachta indica, Capsicum annuum, Ervatamia heyneana, and Nicotiana tabacum. Identification of the biotransformed products was carried out by using high-performance liquid chromatography coupled with diode array detection and liquid chromatography–tandem mass spectrometry analysis. All the cultures transformed valdecoxib into more polar compounds, and C. roseus also produced one unknown compound that is less polar than the substrate. The reactions performed by these plant cell cultures include hydroxylation, methylation, and demethylation. Optimization studies were performed to investigate the effect of the day of extraction and substrate concentration on biotransformation.     

Kinetic resolution of heterocyclic amines by reaction with optically active acid chlorides. The effect of reaction conditions on the diastereoselectivity of acylation of (±)-3-methyl-2,3-dihydro-4H-1,4-benzoxazine

The influence of the reaction conditions (solvent, base) on the diastereoselectivity of acylation of (±)-3-methyl-2,3-dihydro-4H-1,4-benzoxazine with (S)-naproxen and N-tosyl-(S)-proline chlorides was studied. The highest diastereoselectivity was observed for the reaction carried out in benzene in the presence of aliphatic tertiary amines.     

Biosurfactant production by Rhodococcus erythropolis grown on glycerol as sole carbon source

The production of biosurfactant by Rhodococcus erythropolis during the growth on glycerol was investigated. The process was carried out at 28°C in a 1.5-L bioreactor using glycerol as carbon source. The bioprocess was monitored through measurements of biosurfactant concentration and glycerol consumption. After 51 h of cultivation, 1.7 g/L of biosurfactant, surface, and interfacial tensions values (with n-hexadecane) of 43 and 15 mN/m, respectively, 67% of Emulsifying Index (E ₂₄), and 94% of oil removal were obtained. The use of glycerol rather than what happens with hydrophobic carbon source allowed the release of the biosurfactant, originally associated to the cell wall.     

Quantitative HPLC Determination and Stability Studies of Pyridostemin in Extracts and Water Dispersible Granule Formulations of Stemona curtisii

A reversed-phase high-performance liquid chromatographic method has been developed and validated for the determination of pyridostemin, the major pesticidal alkaloid found in Stemona curtisii. This methodology was applied to the investigation of plant extracts and water dispersible granule formulations. Stability indicating procedures have also been carried out. The chromatographic separation was on a C₁₈ column with a mixture of acetonitrile–water–triethylamine (30:70:0.12, v/v/v), using UV detection at 300 nm. Validation procedures showed that the method was specific, accurate and precise. The response was linear over a range of 5–25 μg mL⁻¹ with recoveries in the range of 98.28–102.85%. The RSD for intra- and inter-day precision were <0.72 and <1.29%, respectively. Extraction of plant material with dichloromethane gave a significantly higher pyridostemin content in the crude extracts when compared with extractions in methanol. Partial purification of the crude extracts by silica gel column chromatography was used to concentrate the mixture about fourfold. Degradation behavior of pyridostemin in the partially purified extracts followed first-order kinetics. The main pathways for its decomposition were base hydrolysis and oxidation.     

Parallel synthesis of novel benzimidazoles on a soluble polymer support

Liquid phase combinatorial synthesis using a soluble polyethylene glycol (PEG) polymer support and commercially available 3-nitro-4-fluoro benzoic acid is carried out in order to create a molecular library of trisubstituted benzimidazoles. The PEG-ester conjugate of 3-nitro-4-fluoro benzoic acid is subjected to ipso-fluoro displacement by various primary amines. The nitro group is reduced under neutral conditions using excess zinc and ammonium chloride, producing the polymer-boundo-phenylene diamines. Reaction of the diamines with different aldehydes results in cyclisation to benzimidazoles. The polymer support is cleaved releasing the desired products in high yields and purity. All reactions are performed at room temperature.      

Isomerization processes in inclusion compounds: Xylenes in deoxycholic acid

The isomerization processes induced by UV photons in inclusion compounds of the host-guest type are examined, with special attention to the photophysics of the energy transfer process between the host and the guest, as well as to the influence of the host molecular cavity symmetry and the guest molecular symmetry. In particular, the experimental study has been carried out on the isomerization processes ofp-,m-, ando-xylene inside the molecular cavities of deoxycholic acid. The results have been compared with those obtained by irradiating the xylenes in an inert solution of hexane. The main difference is the elimination of by-products when the photochemical process is carried out in the solid state inclusion compound; however, the high purity of the isomerization product corresponds to a decrease in its yield with respect to the reaction in solution, due to the energy transfer process from the host to the guest moiety.     

Synthesis of 7E,9Z-dodecadienyl acetate,the sex pheromone ofLobesia botrana Shiff

Two syntheses of 7E,9Z-dodecadienyl acetate from 1,3-butadiyne were carried out using either 2E,4Z-heptadienyl acetate or 1-bromo-3E,5Z-octadiene as the key intermediates. The latter underwent organocopper cross-coupling with the respective complementary Grignard reagents (prepared from the corresponding 1-tert-butoxy--chlorohydrins) as alkylating agents.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 766–768, April, 1993.     

A new synthesis ofE- andZ(-)(1R,3S)-2,2-dimethyl-3-(3,3,3-trifluoro-2-chloropropen-1-yl)cyclopropanecarboxylic acids from (+)-3-carene

A new synthesis ofE- andZ(-)(1R,3S)-2,2-dimethyl-3-(3,3,3-trifluoro-2-chloropropen1-yl)cyclopropanecarboxylic acids from (+)-3-carene in 21 % total yield was carried out.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 517–518, March, 1995.     

Cyclization of the Reaction Products of p-Phenylenediamine with Maleic Acid

Treatment of p-phenylenediamine with maleic acid and its diethyl ester gave di- and tetracarboxylic amino acids and their esters. A benzene derivative having an -alanine and an aspartic acid residue has been prepared. The cyclization of aminocarboxylic acids to imidazole and pyrimidine derivatives has been carried out.     

Purification and properties of uricase fromCandida sp. and its application in uric acid analysis in serum

The purification of uricase fromCandida sp. was carried out by precipitation with ammonium sulfate then further proceeded with Sephadex G200, and DEAE-cellulose DE52 chromatographies. The specific activity of the enzyme was enhanced from 0.05-12 (U/mg protein). The purity of the enzyme was judged to be homogeneous by SDS-PAGE. Some of the general properties of enzyme were investigated. The optimum reaction pH and temperature were 8.5 and 30‡C, respectively. The enzyme was stable at a pH range from 8.5-9.5 and at temperatures lower than 35‡C. The apparentK _m value of the enzyme was calculated to be about 5.26 x 10^-6 mol/L. The molecular weight was determined to be 70,000-76,000 by the gel filtration and SDS-PAGE techniques. The isoelectric point was determined to be pH 5.6. The effects of some metallic ions on enzyme activity and stability were discussed. The partial purified uricase was used in serum uric acid determination. The within-batch imprecision percentage ranged from 2.16-2.63 and the between-batch imprecision percentage ranged from 2.4-3.6. The recovery ratio were from 96–101%. The correlation among this method and Boehringer, Roche, or Biotrol enzymatic kits were Y = 1.086x - 0.50 (r = 0.981),Ya = 0.959x - 0.29 (r = 0.97), andYb = l.ll0x - 0.45(r = 0.956), respectively. A linear calibration curve was obtained at 2.5-15 mg/dL uric acid. The stability of reagents and the effects of some substances in serum were also surveyed.     

Electrochemical reduction of NO and O2 on La2−x Sr x CuO4-based electrodes

A series of La_2 − x Sr _x CuO₄ (x = 0.0, 0.05, 0.15, 0.25 and 0.35) compounds was investigated for the use of direct electrochemical reduction of NO in an all-solid-state electrochemical cell. The materials were investigated using cyclic voltammetry in 1% NO in Ar and 10% O₂ in Ar. The most selective electrode material was La₂CuO₄, which had an activity of NO reduction that was 6.8 times higher than that of O₂ at 400 °C. With increasing temperature, activity increased while selectivity decreased. Additionally, conductivity measurements were carried out, and the materials show metallic conductivity behavior which follows an adiabatic small polaron hopping mechanism.     

Biosurfactants production by Pseudomonas aeruginosa FR using palm oil

Biosurfactants production by a strain of Pseudomonas aeruginosa using palm oil as a sole carbon source was investigated. The experiments were carried out in 500-mL conical flasks containing 100 mL of mineral media supplemented with palm oil as the sole carbon source. The P. aeruginosa FR strain was able to reduce surface tension of three tested inorganic media. Rotation velocities from 100 to 150 rpm provided free-cell fermented media with the lowest surface tension of approx 33 mN/m. Emulsification index results of even 100% were achieved when diesel was used as oil phase. Eight surface-active compounds produced by the bacterium were identified by mass spectrometry.     

Comparative study of amidase production by free and immobilized Escherichia coli cells

Escherichia coli NCIM 2569 was evaluated for its potential for amidase production under submerged fermentation. Among the various amide compounds screened, maximum substrate specificity and enzyme yield (8.1 U/mL) were obtained by using 1% acetamide. Fermentation was carried out at 30°C in shake-flask culture under optimized process conditions. A maximum of 0.52 U/mL of intracellular amidase activity was also obtained from cells incubated for 24 h. Studies were also performed to elucidate the optimal conditions (gel concentration, initial biomass, curing period of beads, and calcium ion concentration in the production medium) for immobilization of whole cells. By using E. coli cells entrapped in alginate, a maximum of 6.2 U/mL of enzyme activity was obtained after 12 h of incubation under optimized conditions. Using the immobilized cells, three repeated batches were carried out successfully, and 85% of the initial enzyme activity was retained in the second and third batches. The study indicated that the immobilized E. coli cells offered certain advantages such as less time for maximum enzyme production, more stability in the enzyme production rate, and repeated use of the biocatalyst.     

Flow injection-spectrophotometric determination of cresol compounds in water by reaction withp-aminophenol

A spectrophotometric method has been developed for the simultaneous determination ofo-cresol andm-cresol in water by reaction withp-aminophenol (PAP). Three different methodologies have been assayed; (i) batch analysis, after reaction in an alkaline medium in the presence of dissolved molecular oxygen as oxidizing agent, (ii) a stopped-flow procedure, carried out in the presence of KIO₄ and (iii) a flow injection method based on the same approach. The batch procedure requires 22 min for the full development of colour witho-cresol and 12 min form-cresol. In the stopped-flow mode, using KIO₄ and a reaction time of 12 min, better sensitivity can be obtained for both compounds and limits of detection of 10 g 1^–1 foro-cresol and 30 g 1^–1 form-cresol were found. The flow injection method has a lower sensitivity but permits more than 80 injections per hour. Based on the different maximum absorbance wavelengths obtained for the reaction products of PAP witho-cresol (614 nm) andm-cresol (632 nm), both compounds can be simultaneously determined in water samples and recoveries of 90 to 115% were found in spiked water samples of different types.     

Fatty acid composition of two Athamanta turbith subspecies

The fruit oils of Athamanta turbith ssp. hungarica and Athamanta turbith ssp. haynaldii were obtained by Soxhlet extraction using petroleum ether. The fatty acid composition of oils was determined by GC in the methyl ester form. Considering the composition and content of fatty acids, the examined oils were very similar. Petroselinic acid was the principal one (45.6 and 46.2%, respectively), followed by a significant amount of linoleic acid (26.9 and 29.1%, respectively). In both oils, myristic, pentadecanoic, palmitic, palmitoleic, stearic, petroselinic, oleic, linoleic, α-linolenic, arachidic, and behenic acid were identified. Lignoceric acid was detected only in A. turbith ssp. hungarica oil. Published in Khimiya Prirodnykh Soedinenii, No. 4, pp. 319–320, July–August, 2006.     

The influence of products and by-products obtained by drinking water electrolysis on microorganisms

It is the aim of this work to underline the chemical character of disinfection processes and to present the results of treatment experiments for artificially and electrochemically added chemicals focusing on chlorine components and hydrogen peroxide obtained on IrO₂/RuO₂ anodes. A discontinuous cell with rotating anode placed 4 mm above an IrO₂ expanded mesh cathode of same diameter was used for the generation of electrolysis products. The thermostated experiments were carried out at a temperature of 20 °C and in constant current mode. Artificial solutions prepared using sodium salts and deionised water were electrolysed. Samples were analysed using the DPD (N, N-diethyl-p-phenylendiamine) method. Escherichia coli K-12, Bacillus subtilis DSM 2277 and Saccharomyces cerevisiae Kolin were used as test-microorganisms. Morphological changes were studied using transmission electron microscopy. The results show that electrolysed water had a higher lethal efficiency than Ca(OCl)₂ of the same measured active chlorine concentration. During the killing period mainly inner cell parts of the microorganisms react chemically with the disinfectants. In sufficiently high concentrations and reaction times, the cell material continues to react. Cell walls or membranes can break-through as electron microscopy pictures show. Electrolysed water had a higher lethal efficiency on microorganisms. This behaviour demonstrates the existence of additional by-products.