醛酮类化合物的分子力场参数推导及热力学性质计算

针对醛酮类分子, 基于第一原理的量子化学计算结果开发了准确、可迁移的全原子力场. 利用所得到的力场, 采用分子动力学和蒙特卡罗方法对醛酮类分子的气相分子结构、振动频率、构象能和凝聚相液体性质(密度和蒸发焓), 以及流体的多种热力学性质包括气液相平衡和临界性质, 与涨落相关的等压热容, 传递性质如剪切粘度等进行了计算和预测. 计算结果表明, 该力场可准确地反映气相分子的结构、振动频率、构象能和凝聚相液体密度和蒸发焓等性质, 并准确地预测一系列醛酮类分子的多种热力学性质. 所开发的醛酮类分子力场函数形式简单, 并具有良好的可迁移性和准确性, 在应用范围和计算精度上都有明显的改善和提高.     

利用浮动电荷力场对N-甲基乙酰胺水溶液的分子动力学模拟

利用原子键电负性均衡结合分子力场方法(ABEEM/MM)对N-甲基乙酰胺(NMA)分子的水溶液体系进行了分子动力学模拟. 与经典的力场模型相比, 该方法中的静电势包含了分子内和分子间的静电极化作用, 以及分子内电荷转移影响, 同时加入了化学键等非原子中心电荷位点, 合理体现了分子中的电荷分布. 相对其它极化力场模型, 该模型具有计算量较小的特点. 在该模型下对NMA纯溶液和其水溶液体系进行了分子动力学模拟, 得到的径向分布函数、汽化热和偶极矩等物理量与实验值和其它极化力场方法符合很好, 合理描述了溶质与溶剂之间的静电极化和分子内的电荷转移.     

硝胺及其甲基衍生物的从头计算研究 3: 甲硝胺及其同位素衍生物的谐性力场和振动光谱

用TEXAS从头计算程序,取STO-4-21G基组,计算了甲硝胺的谐性力场和振动光谱.直接理论计算的谐性力场经由其他分子转移来的经验校正因子校正后,提供了甲硝胺振动基频的预测.预测值和甲硝胺分子在气相中的振动光谱实验值之间的平均偏差为31cm^-1.为了获得更合适的气相甲硝胺振动力场和预测它的同位素衍生物的振动光谱,我们优化了一组新的校正因子,使理论值和实验值的平均偏差减为8.9cm^-1.用这组校正因子得到的力场预测了三个同位素衍生物的振动光谱,其同位素位移的理论预测值和实验值符合良好.     

硝胺及其甲基衍生物的从头计算研究 3: 甲硝胺及其同位素衍生物的谐性力场和振动光谱

用TEXAS从头计算程序,取STO-4-21G基组,计算了甲硝胺的谐性力场和振动光谱.直接理论计算的谐性力场经由其他分子转移来的经验校正因子校正后,提供了甲硝胺振动基频的预测.预测值和甲硝胺分子在气相中的振动光谱实验值之间的平均偏差为31cm^-1.为了获得更合适的气相甲硝胺振动力场和预测它的同位素衍生物的振动光谱,我们优化了一组新的校正因子,使理论值和实验值的平均偏差减为8.9cm^-1.用这组校正因子得到的力场预测了三个同位素衍生物的振动光谱,其同位素位移的理论预测值和实验值符合良好.     

丙酮酸分子结构与振动光谱的密度泛函理论研究

用密度泛函方法BLYP、B3LYP和从头算Hartree-Fock(HF)方法在6-31G*基组水平上对丙酮酸分子的几何结构（甲基的重叠式和交错式两种构象）和振动光谱分别进行了优化和计算,并给出了各种频率所对应的红外强度及拉曼活性,对光谱进行了指认。结果表明：在丙酮酸分子的两种构象中,重叠式比较稳定*B3LYP计算得到的构型参数与实验结果比较一致;在振动频率的计算中,BLYP未标度力场所计算的非CH3伸缩振动基频预测值和实验值的平均绝对偏差为10.4cm-1;而HF标度力场的平均绝对偏差为17.9cm-1。说明两者的结果与实验观测频率比较吻合,但B3LYP的频率计算值偏差（38.3cm-1）较大。根据振动频率的势能分布和红外光谱强度对此分子的振动基频进行了理论归属。     

适用于TATB,RDX,HMX含能材料的全原子力场的建立与验证

报道一个适用于三种常见的含能材料分子三硝基三氨基苯(TATB),环三亚甲基三硝胺(RDX),环四亚甲基四硝胺(HMX)的全原子力场.力场采用广泛使用的力场函数形式,其中键参数通过拟合量子化学密度泛函计算的数据获得,电荷参数和范德华参数通过拟合相应的分子晶体的物理性质(密度和升华焓)优化得到.通过计算分子和分子晶体的性质显示该力场可以用来准确地预测分子结构、分子振动频率和分子晶体的晶胞参数、密度和升华焓.进一步的验证显示该力场可用来较为准确地预测分子晶体的状态方程和机械模量.     

硝胺及其甲基衍生物的从头计算研究 Ⅲ.甲硝胺及其同位素衍生物的谐性力场和振动光谱

用TEXAS从头计算程序,取STO-4-21G基组,计算了甲硝胺的谐性力场和振动光谱.直接理论计算的谐性力场经由其他分子转移来的经验校正因子校正后,提供了甲硝胺振动基频的预测.预测值和甲硝胺分子在气相中的振动光谱实验值之间的平均偏差为31cm~(-1).为了获得更合适的气相甲硝胺振动力场和预测它的同位素衍生物的振动光谱,我们优化了一组新的校正因子,使理论值和实验值的平均偏差减为8.9cm~(-1).用这组校正因子得到的力场预测了三个同位素衍生物的振动光谱,其同位素位移的理论预测值和实验值符合良好.     

丙氨酸二肽分子二级结构与振动光谱特性

利用从头算方法探索蛋白质模型分子——丙氨酸二肽的二级结构布居特性以及体系势能变化. 引入对分子结构敏感的振动探针(酰胺振动吸收带), 借助其光谱表象, 寻求振动光谱参数与分子结构之间的联系. 研究结果表明: 丙氨酸二肽分子处于C_7eq构型(Φ/Ψ=-80°/80°)时具有最低能量值, 且分子易形成β折叠、PP_II、C₅及C₇等能量较低的稳定构型. 通过简正模式分析, 得到分子3N-6 个振动模式的吸收光谱, 并通过势能分布分析方法对分子骨架上酰胺振动吸收带的特征振动模式进行了指认. 重点考察分子骨架上酰胺-I带振动光谱参数与分子构型变化之间的相关性, 建立振动光谱参数与蛋白质二级结构之间的联系, 为在化学键水平上研究蛋白质的结构及其发挥作用的机制提供科学依据.     

苯并咪唑类缓蚀剂缓蚀性能的理论评价

采用量子化学计算和分子动力学模拟相结合的方法, 对2-巯基苯并咪唑(A)、2-氨基苯并咪唑(B)、2-甲基苯并咪唑(C)和苯并咪唑(D)等四种缓蚀剂抑制HCl对碳钢腐蚀的性能进行理论评价, 并对其缓蚀机理进行分析. 全局活性指数的计算表明, 四种分子中, 2-巯基苯并咪唑分子具有最强的反应活性; 对于其他三种分子, Fukui指数和全电子密度分布指出, 2-氨基苯并咪唑具有两个亲电攻击中心, 可在金属表面形成双中心吸附, 其缓蚀性能应优于2-甲基苯并咪唑和苯并咪唑; 缓蚀剂分子与三层铁原子表面相互作用的分子动力学模拟进一步确认2-甲基苯并咪唑比苯并咪唑在金属表面吸附更稳定. 综合量子化学计算和分子动力学模拟的计算结果, 四种缓蚀剂分子缓蚀效率的顺序应为A>B>C>D, 缓蚀性能的理论评价结论与实验结果相吻合.     

氟磺酸氟振动光谱的从头算

采用从头算HF／SCF方法以6-31G基组研究了FOSO2F分子的几何结构、振动谐性力场和红外光谱强度．理论力场由Pulay的标度量子力学方法进行标度,计算得到的振动频率与实验值比较平均偏差为6．3cm-1．根据振动频率的势能分布和从头算红外光谱强度值对此分子的振动基频进行了理论归属．     

Fluctuating charge normal modes: An algorithm for implementing molecular dynamics simulations with polarizable potentials

A new method for performing molecular dynamics simulations with fluctuating charge polarizable potentials is introduced. In fluctuating charge models, polarizability is treated by allowing the partial charges to be variables, with values that are coupled to charges on the same molecule as well as those on other molecules. The charges can be efficiently propagated in a molecular dynamics simulation using extended Lagrangian dynamics. By making a coordinate change from the charge variables to a set of normal mode charge coordinates for each molecule, a new method is constructed in which the normal mode charge variables uncouple from those on the same molecule. The method is applied to the TIP4P-FQ model of water and compared to other methods for implementing the dynamics. The methods are compared using different molecular dynamics time steps.     

Evaluations of AMBER force field parameters by MINA approach for copper-based nucleases

We describe the development of the AMBER force field parameters for 46 nucleases involving most kinds of copper nucleases with high DNA affinities and specificities by MINA approach that could evaluate accurate force constants for batch bonds/angles on the basis of energies of three adjacent lengths/angles geometries. The molecular mechanics (MM) and molecular dynamic simulations on adducts of the 21 representative copper-based nucleases with DNA are in excellent agreement with those of experimental results. Furthermore, to validate the evaluated parameters, the studied structures performed frequency analysis together with normal mode calculations in quantum mechanics and MM calculations. The force field parameters evaluated in this work provide an extension of AMBER force field, and the results of molecular dynamics simulations of adduct of copper nuclease and duplex DNA illustrate the potential utility of these parameters.     

Extracting effective normal modes from equilibrium dynamics at finite temperature

A general method for obtaining effective normal modes of a molecular system from molecular dynamics simulations is presented. The method is based on a localization criterion for the Fourier transformed velocity time-correlation functions of the effective modes. For a given choice of the localization function used, the method becomes equivalent to the principal mode analysis (PMA) based on covariance matrix diagonalization. On the other hand, a proper choice of the localization function leads to a novel method with a strong analogy with the usual normal mode analysis of equilibrium structures, where the Hessian system at the minimum energy structure is replaced by the thermal averaged Hessian, although the Hessian itself is never actually calculated. This method does not introduce any extra numerical cost during the simulation and bears the same simplicity as PMA itself. It can thus be readily applied to ab initio molecular dynamics simulations. Three such examples are provided here. First we recover effective normal modes of an isolated formaldehyde molecule computed at 20 K in very good agreement with the results of a normal mode analysis performed at its equilibrium structure. We then illustrate the applicability of the method for liquid phase studies. The effective normal modes of a water molecule in liquid water and of a uracil molecule in aqueous solution can be extracted from ab initio molecular dynamics simulations of these two systems at 300 K.     

Vibrational analysis of x-ray absorption fine structure thermal factors by ab initio molecular dynamics: the Zn(II) ion in aqueous solution as a case study

In this work, we consider a new combination of vibrational analysis and normal-like mode decomposition of Debye-Waller factors of solvated ions entirely based on molecular dynamics data. Such a novel time-dependent analysis procedure provides a direct link between x-ray absorption fine structure parameters and normal mode contributions for an ion-solvent system. The potentialities of such a methodology rely on two fundamental aspects which distinguish it from already available tools. First, a general vibrational analysis that does not require any Gaussian or harmonic model for describing atomic fluctuations in liquids. Second, a very accurate sampling of the short range motions around the structural probe via the recently developed atom centered density matrix propagation/general liquid optimized boundary method. This novel molecular dynamics methodology is based on an integrated ab initio/classical potential using localized basis functions and nonperiodic boundary conditions. As a case study we have chosen the Zn(II) ion in aqueous solution. The consistency of our results and the observed good agreement with experiments show how the key support to advanced structural techniques from molecular dynamics can be further expanded and investigated.     

Solution Structure of Mannobioses Unravelled by Means of Raman Optical Activity

Structural analysis of carbohydrates is a complicated endeavour, due to the complexity and diversity of the samples at hand. Herein, we apply a combined computational and experimental approach, employing molecular dynamics (MD) and density functional theory (DFT) calculations together with NMR and Raman optical activity (ROA) measurements, in the structural study of three mannobiose disaccharides, consisting of two mannoses with varying glycosidic linkages. The disaccharide structures make up the scaffold of high mannose glycans and are therefore important targets for structural analysis. Based on the MD population analysis and NMR, the major conformers of each mannobiose were identified and used as input for DFT analysis. By systematically varying the solvent models used to describe water interacting with the molecules and applying overlap integral analysis to the resulting calculational ROA spectra, we found that a full quantum mechanical/molecular mechanical approach is required for an optimal calculation of the ROA parameters. Subsequent normal mode analysis of the predicted vibrational modes was attempted in order to identify possible marker bands for glycosidic linkages. However, the normal mode vibrations of the mannobioses are completely delocalised, presumably due to conformational flexibility in these compounds, rendering the identification of isolated marker bands unfeasible.     

Time series analysis of collective motions in proteins

The dynamics of alpha-amylase inhibitor tendamistat around its native state is investigated using time series analysis of the principal components of the C(alpha) atomic displacements obtained from molecular dynamics trajectories. Collective motion along a principal component is modeled as a homogeneous nonstationary process, which is the result of the damped oscillations in local minima superimposed on a random walk. The motion in local minima is described by a stationary autoregressive moving average model, consisting of the frequency, damping factor, moving average parameters and random shock terms. Frequencies for the first 50 principal components are found to be in the 3-25 cm(-1) range, which are well correlated with the principal component indices and also with atomistic normal mode analysis results. Damping factors, though their correlation is less pronounced, decrease as principal component indices increase, indicating that low frequency motions are less affected by friction. The existence of a positive moving average parameter indicates that the stochastic force term is likely to disturb the mode in opposite directions for two successive sampling times, showing the modes tendency to stay close to minimum. All these four parameters affect the mean square fluctuations of a principal mode within a single minimum. The inter-minima transitions are described by a random walk model, which is driven by a random shock term considerably smaller than that for the intra-minimum motion. The principal modes are classified into three subspaces based on their dynamics: essential, semiconstrained, and constrained, at least in partial consistency with previous studies. The Gaussian-type distributions of the intermediate modes, called "semiconstrained" modes, are explained by asserting that this random walk behavior is not completely free but between energy barriers.     

甘氨酸二肽分子酰胺-Ⅰ带光谱与结构相关性

系统探索了蛋白质二肽模型分子——甘氨酸二肽(GLYD)在气相与水溶液中的结构与光谱特性。从分子动力学轨迹中提取具有代表性结构的GLYD-D₂O聚集体的瞬态结构开展简正模式分析,获取了对蛋白质二级结构敏感的酰胺-Ⅰ带的振动光谱参数,建立起振动光谱与特征基团结构间的相关性。将溶剂作用以静电势场的形式投影至二肽分子骨架中,与酰胺-Ⅰ带在气/液相中的频率差相关联,并引入酰胺-Ⅰ带简正模式随二级结构变化的规律,将各个构象态可能存在的振动耦合包含在内,构建具有二级结构敏感性的静电频率转换图,实现溶液相中多肽骨架酰胺-Ⅰ带的快速准确预测。     

Density functional theory and empirical derived force fields for the delocalized polaron form of polyaniline. Application to properties determination of an isolated oligomer using molecular dynamics simulations

Normal mode analyses obtained from quantum chemical calculations at the DFT level of theory have been performed for the repetitive unit of the delocalized bipolaron form of polyaniline (PANI). Empirical molecular mechanics force field parameters were consecutively refined using the SPASIBA software and applied to the molecular dynamics properties of an isolated dodeca oligomer model of the leucoemeraldine form of PANI. It is shown that effects of protonation of the emeraldine base spread over the four rings constituting the repeating unit. Molecular dynamics simulations reveal alternative bendings of the whole chain with a time period of 18-20 ps for the model of PANI under study.     

Nuclear quantum effects on an enzyme-catalyzed reaction with reaction path potential: proton transfer in triosephosphate isomerase

Nuclear quantum mechanical effects have been examined for the proton transfer reaction catalyzed by triosephosphate isomerase, with the normal mode centroid path integral molecular dynamics based on the potential energy surface from the recently developed reaction path potential method. In the simulation, the primary and secondary hydrogens and the C and O atoms involving bond forming and bond breaking were treated quantum mechanically, while all other atoms were dealt classical mechanically. The quantum mechanical activation free energy and the primary kinetic isotope effects were examined. Because of the quantum mechanical effects in the proton transfer, the activation free energy was reduced by 2.3 kcal/mol in comparison with the classical one, which accelerates the rate of proton transfer by a factor of 47.5. The primary kinetic isotope effects of kH/kD and kH/kT were estimated to be 4.65 and 9.97, respectively, which are in agreement with the experimental value of 4+/-0.3 and 9. The corresponding Swain-Schadd exponent was predicted to be 3.01, less than the semiclassical limit value of 3.34, indicating that the quantum mechanical effects mainly arise from quantum vibrational motion rather than tunneling. The reaction path potential, in conjunction with the normal mode centroid molecular dynamics, is shown to be an efficient computational tool for investigating the quantum effects on enzymatic reactions involving proton transfer.     

Harmonic analysis of large systems. III. Comparison with molecular dynamics

Atomic motions in bovine pancreatic trypsin inhibitor (BPTI), derived from molecular dynamics, harmonic analysis, and quasiharmonic analysis, are compared when a single protein model, energy parameters, and environment are employed. Molecular dynamics (MD) was carried out for 2 nanoseconds. An average structure was determined from the last nanosecond of the MD simulation, when no major structural changes were observed. This structure was used for several harmonic analysis calculations as well as for a reference structure for the quasiharmonic analysis, for both full basis and reduced basis sets. In contrast to the harmonic analysis results, the quasiharmonic reduced basis calculation using a spherical harmonics reduced basis provided good agreement with the full basis calculation, suggesting that when anharmonic effects are considered, BPTI can behave as a homogeneous object. An extensive analysis of the normal modes from a diverse set of 201 minimized MD simulation frames was performed. On only the sub-picosecond time scale were energy minima revisited after a transition to another state. This analysis shows that the dynamics average structure is not representative of the simulation frames in terms of energy and vibrational frequencies. For this model of BPTI, 42% of the motion (mean-squared fluctuation) can be attributed to harmonic limit behavior. A spectral analysis of the correlation function of deformation for a particular normal mode or quasiharmonic mode can be used to determine the time scales of motions which correspond to harmonic vibration, large-scale drift, or sharp transitions between local substrates. © 1995 John Wiley & Sons, Inc.