The Surface and Thermodynamic Properties of Ethoxylated Sodium Monoalkyl Sulfosuccinate Surfactants

A series of ethoxylated sodium monooctyl sulfosuccinates [E(n)SMOSS] and ethoxylated sodium monolauryl sulfosuccinates [E(n)SMLSS] have different units of ethylene oxide (n = 9, 14, 23) were synthesized. The surface and thermodynamic properties of these surfactants have been compared with sodium dioctyl sulfosuccinate surfactant (SDOSS) as a commonly used surfactant. The surface tension measurements at 25, 35, 45, and 55°C were used to determine of the critical micelle concentration (CMC) and surface active properties of these surfactants. The effect of the ethylene oxide (EO) unit and the alkyl chain length on the surface properties for the prepared surfactants was studied. The results show that the ethoxylated sodium monoalkyl sulfosuccinates generally have lower values of CMC than that of sodium dioctyl sulfosuccinate. The values of surface active parameters indicate that the ethoxylated sodium monooctyl sulfosuccinates and ethoxylated sodium monolauryl sulfosuccinates surfactants have adsorption properties better than the sodium dioctyl sulfosuccinate surfactant as a resulted presence of ethylene oxide in molecules of the prepared surfactants. The thermodynamic parameters show that the (EO) unites in the chemical structure of ethoxylated sodium monoalkyl sulfosuccinate surfactants improve their micellization and adsorption properties.     

Temperature Effect on the Phase Behavior of the Systems Water/Sucrose Laurate/Ethoxylated‐mono‐di‐glyceride/Oil

The phase behavior of the systems water/sucrose laurate/ethoxylated mono‐di‐glyceride/oil was investigated as function of temperature and the weight ratio of EMDG in the mixed surfactants. The oils were R (+)‐limonene, isopropylmyristate, and caprylic‐capric triglyceride. This study demonstrates that the phase inversion temperature (PIT) decreases and the efficiency of the mixed surfactants (γ¯) increase as the weight ratio of the EMDG in the mixed surfactants increases. R (+)‐limonene gave lower phase inversion temperatures and higher efficiencies compared to isopropylmyristate, and caprylic‐capric triglyceride. The solubilization capacity of the system water/sucrose laurate/oil increased upon the addition of ethoxylated mono‐di‐ glyceride which stabilize the surfactant layer and increase the interfacial area.     

Adsorption of nonionic mixtures at the air-water interface: effects of temperature and electrolyte

Specular neutron reflection has been used to investigate the effects of temperature and added electrolyte on the adsorption of nonionic surfactants and nonionic surfactant mixtures at the air-water interface. For the alkyl poly-oxyethylene oxide nonionic surfactants, C(n)EO(m), the adsorption at the air-water interface is independent of temperature for surfactants with shorter ethylene oxide groups, whereas there is an increasing tendency for increased adsorption with temperature for surfactants with longer ethylene oxide groups. The addition of "salting in" (sodium thiocyanate, NaSCN) and "salting out" (sodium chloride, NaCl, sodium sulphate, Na2SO4) electrolyte results in reduced and enhanced adsorption, respectively, for C12EO8, whereas both types of electrolyte result in enhanced adsorption for C12EO12. The addition of electrolyte does not substantially alter the temperature dependence of the adsorption of the pure monolayers. For the nonionic mixtures of C12EO3/C12EO8 increasing temperature results in a surface richer in the least surface-active component, C12EO8. For the same nonionic mixture, the addition of "salting in" and "salting out" electrolyte results in an reduced and increased adsorption, respectively. The addition of "salting in" electrolyte results in a surface more rich in C12EO3, whereas for the addition of both "salting in" and "salting out" electrolyte the surface composition is essentially unaltered.     

Quantitative effect of nonionic surfactant partitioning on the hydrophile-lipophile balance temperature

Phase behaviors of water/nonionic surfactants/isooctane systems are determined experimentally in temperature-global surfactant concentration diagrams. The surfactants are monodistributed polyoxyethylene glycol n-dodecyl ether. They are used as model mixtures of two, three, or five compounds or as constituents of a commercial surfactant. It is found that the phase diagrams of these systems are bent gradually toward the highest temperatures as the global surfactant concentration decreases. Each phase diagram is well-characterized by the curve of the HLB (hydrophile-lipophile balance) temperature versus the global surfactant concentration. For any fixed global surfactant concentration, this temperature is the middle temperature of the three-phase region; it can be calculated from an additive rule of the HLB temperatures of the surfactants weighted by their mole fractions at the water/oil interface. These mole fractions are determined through the pseudophase model using surfactant partitioning. Calculations require the knowledge of the critical micelle concentration, the partition coefficient between water and oil, and the HLB temperature of each surfactant of the mixture. This treatment can be used to correctly predict the variation of the HLB temperatures of the surfactant mixtures studied versus the global surfactant concentration. Furthermore, these calculations show that the observed curvature of the phase diagrams at the lowest global concentrations is due to the most favorable partitioning toward the oil of the lowest ethoxylated surfactant molecules.     

Propylene Glycol and Ethoxylated Surfactant Effects on the Phase Behavior of Water/Sucrose Stearate/Oil System

In this work, we studied the phase behavior as function of temperature of water/sucrose stearate/propylene glycol/oil and water/sucrose stearate/ethoxylated mono‐di‐glyceride/oil systems. The oils were R (+)‐limonene, isopropylmyristate, and caprylic‐capric triglyceride. It was found that adding propylene glycol and ethoxylated mono‐di‐glyceride to the water/sucrose stearate/R (+)‐limonene and water/sucrose stearate/isopropylmyristate systems decreases the temperature and surfactants concentration needed for the formation of a microemulsion phase region and no three phase region is observed. In the case of water/sucrose stearate/caprylic‐capric triglyceride system a three phase region is observed. In the caprylic‐capric based system, it was found that increasing the propylene glycol and ethoxylated mono‐di‐glyceride contents decrease the phase inversion temperature and increases the efficiency. In the case where the mixed surfactants (sucrose stearate and ethoxylated mono‐di‐glyceride) were present in the system, the efficiencies observed are higher than those observed in the system based on the mixture of sucrose stearate and propylene glycol.     

SOLUBILIZATION IN MIXED REVERSE MICELLAR SYSTEMS OF AOT/NONIONIC SURFACTANTS/n-HEPTANE

Solubilization of water and aqueous NaCl solutions in mixed reverse micellar systems of anionic surfactant AOT and nonionic surfactants in n-heptane was studied. It was found that the maximum solubilization capacity of water was higher in the presence of certain concentrations of NaCl electrolyte, and these concentrations increased with the increase of nonionic surfactant content and their EO chain length. Soluibilization capacity was enhanced by mixing AOT with nonionic surfactants. The observed phenomena were interpreted in terms of the stability of the interfacial film of reverse micellar microdroplet and the packing parameter of the surfactant that formed mixed reverse micelles.     

PHASE BEHAVIOR OF BRANCHED TAIL ETHOXYLATED CARBOXYLATE SURFACTANT/ELECTROLYTE/ALKANE SYSTEMS.

This paper describes the effect of pH on phase behavior of branched tail EO carboxylate surfactants in electrolyte/ alkane microemulsion system3 which are of possible pertinence to enhanced oil recovery. The pH of the aqueous surfactant solutions was found to have a considerable effect on the salinity requirement for middle phase microemulsion formation. At 70 and 60°C alcohol-free optimal three phase microemulsion systems are formed with all alkanes studied over the entire pH range of 6-12. At lower temperatures and. higher pH values, liquid crystals were found to form in systems which contained lower molecular weight alkanes.     

Sub-zero temperature behavior of water in non-ionic microemulsions

Sub-zero temperature DSC measurements were conducted to evaluate the behavior of water in non-ionic microemulsions. Two surfactant systems were studied. The first, based on ethoxylated fatty alcohol, octaethylene glycol monon-dodecylether [hereafter referred to as C₁₂(EO)₈] and also containing water, pentanol and dodecane at a fixed weight ratio of 1:1. The second system, based on oligomeric ethoxylated siloxanes, water and dodecanol as oil phase. In both systems it was found that in up to 30 wt.% of the total water content, all water molecules solubilize in the amphiphilic phase and are bound to the ethylene oxide (hereafter referred to as EO) head-groups. No free water exists in the surfactant aggregates’ core. Up to three molecules of water are bound to each EO group. In the first system, the behavior changes significantly upon adding more water. The added pentanol allows further swelling and the water penetrates into the amphiphile structures and forms a reservoir of free water. Structures are deformed and grow from elongated channels (up to 15–20 wt.% water), via illdefined (one-dimensional growth) local lamellar structures (up to ca. 60 wt.% water) to spherical normal, O/W micelles (at ≥85 wt.% water). In contrast, the oligomeric systems, due to geometrical restrictions of the amphiphiles and the nature of their curvature that prevents inversion, cannot further solubilize water in the surfactant aggregates’ core, causing phase separation to occur. Part of the results presented in this paper were included in S. E.’s doctoral thesis in Applied Chemistry at The Hebrew University of Jerusalem, Israel.     

Water/supercritical CO2 microemulsions with mixed surfactant systems

Phase behavior was investigated for water/supercritical CO 2 (W/scCO2) microemulsions stabilized with sodium bis(1H,1H,2H,2H-heptadecafluorodecyl)-2-sulfosuccinate (8FS(EO) 2) mixed with various guest surfactants. Only for the mixtures with fluorocarbon-hydrocarbon hybrid anionic surfactants (FC6-HC n), the maximum water-to-surfactant molar ratio (W0(c)) was larger than that estimated from linear interpolation of the W0(c) values for pure 8FS(EO) 2 and pure guest surfactant. Fourier transform infrared (FT-IR) measurement for the microemulsion revealed that the mixing of 8FS(EO) 2 with FC6-HC n can prevent a phase transition from the microemulsion to the liquid crystal even in the presence of excess water. It was also found from the measurement of water/scCO 2 interfacial tension that the area occupied per surfactant molecule was markedly increased by the mixing with FC6-HC n. The loose molecular packing, probably due to a microsegregation of 8FS(EO) 2 and FC6-HC n, is consistent with the enhanced stability of the microemulsion upon surfactant mixing.     

蛋白质在表面活性剂与高分子共组双水相体系中 的分配

高分子和正负离子表面活性剂混合物可形成一种新型双水相体系。研究蛋白质在溴化十二烷基三乙铵/十二烷基硫酸钠与聚氧乙烯(EO)-聚氧丙烯(PO)嵌段共聚物(EO~2~0PO~8~0)共组双水相体系中的分配。通过在高分子接上亲和配基,研究蛋白质在带有亲和配基高分子的双水相体系中的分配。将表面活性剂富集相稀释或加热高分子富集相,又可形成新的双水相体系,由此可进行蛋白质的多步分配。在蛋白质的分配完成之后,通过将表面活性剂富集相进一步稀释或将高分子富集相加热至高分子浊点以上可将表面活性剂和高分子与目标蛋白质分离。正负离子表面活性剂和高分子还可以循环使用。     

The importance of lipophobicity in surfactants: methods for measuring lipophobicity and its effect on the properties of two types of nonionic surfactant

In researching the properties of surfactants, lipophobicity is an important consideration. Increasing surfactant lipophobicity corresponds to a decrease in the saturation concentration of a singly dispersed surfactant in oil, i.e., a decrease in the critical micelle concentration in oil (CMC(oil)). This, in turn, is the crucial property in discussing the efficiency of a surfactant. Lipophobicity is influenced by the structure and length of the hydrophilic moiety of the surfactant. Surfactants that consist of OH or CO groups are effective for use in both aliphatic and aromatic hydrocarbon-rich systems because they are highly lipophobic and of a compact size and function independent of temperature. These characteristics are also reflected in their phase behavior. Phase diagrams illustrate the following properties: temperature independence; strong absorption at the water-oil interface and efficient action even with a very small amount of surfactant with a low CMC; high solubilization of water and oil into an aggregated surfactant solution phase. Through phase diagrams, the CMC(oil) of R10EO8 was obtained and the result used to compare the many different characteristics of the more typical oxyethylene nonionic surfactants with the new polyglyceryl nonionic surfactants.     

Colloidal particles derived from a complex of phosphotungstic Acid and ethoxylated surfactants

Stable, colloidal sols of submicron size were prepared by titration of aqueous solutions of alkylene oxide surfactants with phosphotungstic acid, H(3)PW(12)O(40) (PTA), followed by neutralization with ammonium or potassium hydroxide. The stoichiometry of the complex between phosphotungstic acid and the ethoxylated surfactant was determined by (1)H and (31)P NMR and was dependent upon the degree of ethoxylation. For example, in the ethoxylated octylphenol having 9-10 ethylene oxide units, Triton X-100, the mole ratio of surfactant to PTA was 4.5. In the ethoxylated octylphenol having 70 ethylene oxide units, Triton X-705, the mole ratio of surfactant to PTA was 1. Prior to nucleation of particles, phosphotungstic acid forms an apparent yellow charge transfer complex with ethoxylated alkylphenol surfactants, typified by Triton X-405. This complex is characterized by an absorption spectrum that is the sum of the spectra of Triton X-405 and PTA with a very weak shoulder at 400-500 nm. Particles were nearly monodisperse and their size was dependent on the nonionic surfactant employed, the heteropolyacid, and the rate of addition of heteropolyacid solution.     

Adsorption of Pure Nonionic Alkylethoxylated Surfactants down to Low Concentrations at a Silica/Water Interface as Determined Using a HPLC Technique

The adsorption of pure nonionic alkylethoxylated surfactants of the C₁₂E_nseries at silica/water interface has been determined using a very precise HPLC technique. The number of ethoxylated groups was varied from 2 to 9. The adsorption isotherms were constructed with special attention to the very low surface coverage domain. It is shown that at very low concentration, the adsorption amounts are higher as the number of ethoxylated groups increases but the reverse trend is found at higher surfactant concentration and above the critical micelle concentration. It is shown that this behavior is the consequence of the interplay of the primary and secondary adsorption mechanisms depending upon the length of the ethoxylated chain. The maximum adsorption quantities is not a linear function of the number of ethoxylated groups. This and other observations confirm the viewpoint that the behavior of nonionic surfactant aggregates adsorbed at a hydrophilic surface carries many similarities with the properties of this class of nonionic surfactant aggregates in bulk aqueous solutions.     

Equilibrium surface adsorption behavior in complex anionic/nonionic surfactant mixtures

Neutron reflectivity (NR) and small angle neutron scattering (SANS) have been used to investigate the equilibrium surface adsorption behavior and the solution microstructure of mixtures of the anionic surfactant sodium 6-dodecyl benzene-4 sulfonate (SDBS) with the nonionic surfactants monododecyl octaethylene glycol (C12EO8) and monododecyl triiscosaethylene glycol (C12EO23). In the SDBS/C12EO8 and SDBS/C12EO23 solutions, small globular mixed micelles are formed. However, the addition of Ca2+ ions to SDBS/C12EO8 results in a transition to a vesicle phase or a mixed vesicle/micellar phase for SDBS rich compositions. In contrast, this transition hardly exists for the SDBS/C12EO23 mixture, and occurs only in a narrow composition region which is rich in SDBS. The adsorption of the SDBS/C12EO8 mixture at the air-solution interface is in the form of a mixed monolayer, with a composition variation that is not consistent with ideal mixing. In water and in the presence of NaCl, the nonideality can be broadly accounted for by regular solution theory (RST). At solution compositions rich in SDBS, the addition of Ca2+ ions results in the formation of multilayer structures at the interface. The composition range over which multilayer formation exists depends upon the Ca2+ concentration added. In comparison, the addition of a simple monovalent electrolyte, NaCl, at the same ionic strength does not have the same impact upon the adsorption, and the surface structure remains as a monolayer. Correspondingly, in solution, the mixed surfactant aggregates remain as relatively small globular micelles. In the presence of Ca2+ counterions, the variation in surface composition with solution composition is not well described by RST over the entire composition range. Furthermore, the mixing behavior is not strongly correlated with variations in the solution microstructure, as observed in other related systems.     

Synthesis and Evaluation of Ethoxylated Alkyl Sulfosuccinates as Oil Spill Dispersants

The surface properties particularly, Krafft point, foam stability and emulsion stability for the synthesized series of ethoxylated sodium monoalkyl (octyl-, dodecyl-, and cetyl-) sulfosuccinate surfactants were investigated comparing with those of sodium dioctyl sulfosuccinate. The prepared surfactants were evaluated as oil spill dispersants using screen test method. The results show that, the ethylene oxide units in the mixed moiety surfactant system (anionic–nonionic) effect on the depression of the Krafft point. Also, the increasing of ethylene oxide units in the prepared surfactants decreases the foam ability of these surfactants. The results of emulsion stability show that, the increasing in ethylene oxide units owing to the emulsion stability decreases. The prepared surfactants show a dispersion capability at different content of ethylene oxide units (9, 14, 23, and 90) and at different concentrations. The dispersion capability for these surfactants in the sea water is better than in the fresh water. The results show that, the increase of ethylene oxide units increases the dispersion efficiency of the synthesized surfactants.     

Interfacial properties of branch-tailed fluorinated surfactants yielding a water/supercritical CO2 microemulsion

We have examined the interfacial properties of several fluorinated surfactants in a water/CO2 mixture with a pendant drop tensiometer and revealed the relationships between the interfacial properties, the surfactant structure, and the microemulsifying power. We employed the following Aerosol-OT analogue surfactants that have two fluorinated tails: bis(1H,1H,5H-octafluoropentyl)-2-sulfosuccinate (di-HCF4), sodium bis(1H,1H,9H-hexadecafluorononyl)-2-sulfosuccinate (di-HCF8), sodium bis(1H,1H,2H,2H-heptadecafluorodecyl)-2-sulfosuccinate (8FS(EO)2), and sodium bis((1H,1H,2H,2H-heptadecafluorodecyl)-oxyethylene)-2-sulfosuccinate (8FS(EO)4). To discuss the effect of the fluorocarbon/hydrocarbon ratio in single surfactant molecules, water/CO2 interfacial tension (IFT) of a hybrid surfactant with one fluorocarbon and one hydrocarbon tail, that of a surfactant with a single fluorinated tail, and that of a hydrocarbon surfactant, Aerosol-OT (AOT), were examined. The hybrid surfactant employed was sodium 1-oxo-1-[4-(tridecafluorohexyl)phenyl]-2-hexanesulfonate (FC6-HC4), and the single-tailed surfactant was perfluoropolyether ammonium carboxylate (PFPECOONH4, CF3CF2(CF2OCF(CF3))4COONH4). All of the fluorinated AOT analogue surfactants exhibited an excellent level of activity at the water/CO2 interface compared with other fluorinated surfactants and AOT. With a larger hydrocarbon chain number in the CO2-philic tails (i.e., from 0 to 2), the IFT of the AOT analogue surfactants was increased. The area occupied by one surfactant molecule at the water/CO2 interface, A, and the critical microemulsion concentration, cmicroc, were determined and used to examine the water-to-surfactant molar ratio within a reversed micelle, W0c, of the surfactants. The surfactants that form W/scCO2 microemulsions with a large W0c were found to lower the interfacial tension efficiently irrespective of increases in temperature. To achieve the most desirable W0C, the surfactant needs not only a high CO2-philicity of the tails but also a high Krafft point, properties which induce a low hydrophilic/CO2-philic balance.     

Studies of the rate of water evaporation through adsorption layers using drop shape analysis tensiometry

With modified measuring procedure and measuring cell design in the drop profile tensiometer PAT, it became possible to study the rate of water evaporation through adsorbed or spread surface layers. This method was employed to measure the rate of water evaporation from drops covered by adsorbed layers of some proteins and surfactants, in particular n-dodecanol. It was shown that the formation of dense (double or condensed) adsorbed layers of protein and the formation of 2D-condensed n-dodecanol layer decrease the water evaporation rate by 20-25% as compared with pure water. At the same time, the adsorbed layers of ordinary surfactants (sodium dodecyl sulfate and nonionic ethoxylated surfactant C(14)EO(8)) do not affect the water evaporation rate remarkably.     

The phase diagram of the lyotropic nematic mesophase in the TTAB/NaBr/water system

The phase diagram of the nematic mesophase present in the tetradecyltrimethylammonium bromide/sodium bromide/water ternary system was determined. A calamitic nematic mesophase (N_C) was observed which extends to very high concentrations of electrolyte. The order parameters of the surfactant head group in the mesophases were studied by the NMR quadrupolar splitting of the deuterated surfactant. On increasing the temperature of nematic mesophases with low electrolyte concentrations, a phase separation occurs with the formation of a more highly ordered hexagonal phase and an isotropic phase. Diffusion measurements of the isotropic micellar solution by the NMR PFG method were used to estimate hydrodynamic radii at low surfactant concentrations and to study micelle diffusion as the concentration of the surfactant was increased to the liquid crystalline region. At higher surfactant concentrations, the diffusion coefficient reached a limiting value. The calamitic nematic mesophase in this surfactant/electrolyte/water system appears to be formed by long wormlike micelles.     

Adsorption of mixtures of nonionic sugar-based surfactants with other surfactants at solid/liquid interfaces II. Adsorption of n-dodecyl-beta-D-maltoside with a cationic surfactant and a nonionic ethoxylated surfactant on solids

Synergy and antagonism between sugar-based surfactants, a group of environmentally benign surfactants, and cationic surfactants and nonionic ethoxylated surfactants have been investigated in this study with solids which adsorbs only one or other when presented alone. Sugar-based n-dodecyl-beta-D-maltoside (DM) does not adsorb on silica by itself. However, in mixtures with cationic dodecyltrimethylammonium bromide (DTAB) and nonionic nonylphenol ethoxylated decyl ether (NP-10), DM adsorbs on silica through hydrophobic interactions. In contrast, although DM does adsorb on alumina, the presence of NP-10 reduces the adsorption of DM as well as that of the total surfactant adsorption. Such synergistic/antagonistic effects of sugar-based n-dodecyl-beta-D-maltoside (DM) in mixtures with other surfactants at solid/liquid interfaces were systematically investigated and some general rules on synergy/antagonism in mixed surfactant systems are identified. These results have implications for designing surfactant combinations for controlled adsorption or prevention of adsorption.     

Nonionic Microemulsion: Mechanism of Formation and Percolation

A series of microemulsions, both W/O and O/W, based on nonionic surfactants of the form (NP(EO)_n), were prepared using the titration method. Mixing a constant weight of surfactant with a constant volume of the dispersed phase and an initial volume of continuous phase produces an emulsion, which is titrated to clarity with another surfactant (cosurfactant). Plotting (a) the volume of cosurfactant necessary to transform an emulsion into a microemulsion containing a fixed volume of dispersed phase and constant weight of surfactant versus (b) different initial continuous-phase volumes yields a straight line. Extrapolating from experimentally determined values for the cosurfactant volume to the value corresponding to a zero-volume continuous phase allows the determination of the surfactant molar composition and the average number of ethylene oxides (EO) per nonylphenol adsorbed at the interface. Using a surfactant with the same number of ethylene oxides yields a single-surfactant microemulsion. Measurement of surfactants transmittance in the oil and water phases demonstrates that microemulsification occurs when the surfactant interfacial film is equally soluble in the two phases. Surface pressure measurements reveal that oil penetration impedes formation of O/W microemulsions with n-tetradecane or n-hexadecane as dispersed phase. Conductance, particle size, and transmittance measurements show that above a certain dispersed-phase volume percolation of the microemulsion occurs.