ZnS:Mn2+/聚苯乙烯核壳及ZnS:Mn2+中空球的制备和光谱性质

ZnS:Mn2+ polystyrene (PS) core-shell structures and ZnS:Mn2+ hollow spheres were prepared by a sonoehemical deposition approach. Transmission electron micrograph (TEM) studies show that the PS surface is covered by a thin shell consisted of ZnS: Mn2+ nanoparticles with an average size of 9 nm. ZnS: Mn2+ hollow spheres were obtained by heating the core-shell particles in air at 500 ℃ to drive off PS. The photoluminescence spectrum for the emission band of Mn2+ peaked at 540 nm, and a 45 nm blue shift compared to that of corresponding bulk sample, was discussed based on the Mn-O octahedral distortion induced by shell structure.     

ZnS nanosheets: Egg albumin and microwave-assisted synthesis and optical properties

ZnS nanosheets were prepared via egg albumin and microwave-assisted method. The phases, crystalline lattice structures, morphologies, chemical and optical properties were characterized by X-ray diffraction (XRD), high resolution transmission electron microscopy (HRTEM), field-emission scanning electron microscope(FE-SEM), selected area electron diffraction (SAED), Fourier transform infrared (FTIR) spectroscopy, ultraviolet–visible (UV–Vis) spectroscopy and fluorescence(FL) spectrometer and growth mechanism of ZnS nanosheets was investigated. The results showed that all samples were pure cubic zinc blende with polycrystalline structure. The width of ZnS nanosheets with a rectangular nanostructure was in the range of 450–750 nm. The chemical interaction existed between egg albumin molecules and ZnS nanoparticles via the amide/carboxylate group. The band gap value calculated was 3.72 eV. The band at around 440 nm was attributed to the sulfur vacancies of the ZnS nanosheets. With increasing volumes of egg albumin, the photoluminescence (PL) intensity of ZnS samples firstly increased and then decreased, attributed to concentration quenching.     

亲油性ZnS纳米微粒的合成

纳米微粒具有小尺寸效应、表面效应、量子效应和宏观量子隧道效应等一系列普通材料所不具备的特性 ,因而引起科技工作者的广泛重视 ,成为材料科学研究的热点 .制备纳米微粒的方法很多 [1～ 7] ,但由于纳米微粒的小尺寸效应及表面效应 ,通常制备的无机纳米微粒极易团聚 ,而且无机纳米微粒的非油溶性使其在摩擦学领域的应用受到很大限制 .本文采用表面修饰 [8～ 11] 方法 ,通过共沉淀的竞争反应 ,制备了表面为有机修饰剂双十六烷基二硫代磷酸 (DDP)修饰的无机 Zn S纳米微粒 ,并用红外光谱、 X射线光电子能谱和透射电子显微镜等分析手段对表…     

Formation of zinc sulfide and hydroxylapatite nanoparticles in polyelectrolyte-modified microemulsions

The paper is focused on the formation of nanoparticles, i.e., zinc sulfide (ZnS) and hydroxylapatite, in a microemulsion template phase consisting of heptanol, water, and a surfactant with a sulfobetaine head group in the absence and presence of an added polyelectrolyte. In the absence of a polyelectrolyte, beside larger particles, spherical ZnS nanoparticles with a diameter below 10 nm can be redispersed after solvent evaporation. In the presence of the synthetic cationic polyelectrolyte poly(diallyldimethylammonium chloride), a reloading of the particle surface is observed, and cationic charged ZnS nanoparticles, of about 5 nm in size, can be redispersed as a main fraction. When hydroxylapatite is formed in the presence of the more stiff biopolymer chitosan hydroxylapatite, hybrid structures were formed. Transmission electron micrographs show fiber-like aggregate structures, consisting of individual small nanoparticles ordered along the polymer chain.     

Synthesis and characterizations of ultra-small ZnS and Zn(1-x)Fe(x)S quantum dots in aqueous media and spectroscopic study of their interactions with bovine serum albumin

This work reports a new experimental methodology for the synthesis of ultra small zinc sulfide and iron doped zinc sulfide quantum dots in aqueous media. The nanoparticles were obtained using a simple procedure based on the precipitation of ZnS in aqueous solution in the presence of 2-mercaptoethanol as a capping agent, at room temperature. The effect of Fe(3+) ion concentration as dopant on the optical properties of ZnS was studied. The size of quantum dots was determined to be about 1nm, using scanning tunneling microscopy. The synthesized nanoparticles were characterized by X-ray diffraction, UV-Vis absorption and photoluminescence emission spectroscopies. The presence and amount of iron impurity in the structure of Zn((1-x))Fe(x)S nanocrystals were confirmed by atomic absorption spectrometry. A blue shift in band-gap of ZnS was observed upon increasing incorporation of Fe(3+) ion in the iron doped zinc sulfide quantum dots. The photoluminescence investigations showed that, in the case of iron doped ZnS nanoparticles, the emission band of pure ZnS nanoparticles at 427nm shifts to 442nm with appearance of a new sharp emission band around 532nm. The X-ray diffraction analysis indicated that the iron doped nanoparticles are crystalline, with cubic zinc blend structure, having particle diameters of 1.7±022nm. Finally, the interaction of the synthesized nanoparticles with bovine serum albumin was investigated at pH 7.2. The UV-Vis absorption and fluorescence spectroscopic methods were applied to compare the optical properties of pure and iron doped ZnS quantum dots upon interaction with BSA. It was proved that, in both cases, the fluorescence quenching of BSA by the quantum dots is mainly a result of the formation of QDs-BSA complex in solution. In the steady-state fluorescence studies, the interaction parameters including binding constants (K(a)), number of binding sites (n), quenching constants ( [Formula: see text] ), and bimolecular quenching rate constants (k(q)) were determined at three different temperatures and the results were then used to evaluate the corresponding thermodynamic parameters ΔH, ΔS and ΔG.     

Influence of cobalt concentration on structural and optical properties of ZnS quantum dots

ZnS and Co-doped ZnS nanoparticles have been prepared by simple chemical precipitation method. Zinc acetate, sodium sulfide, and cobalt nitrate have been used as precursors for the preparation of Co-doped ZnS quantum dots. The X-ray diffraction results revealed that the undoped and Co-doped ZnS quantum dots exhibit hexagonal structure. The average grain size of quantum dot was found to lie in the range of 2.6–3.8 nm. The surface morphology has been studied using scanning electron microscope. The compositional analysis results confirm the presence of Co, Zn and S in the sample. The optical properties of undoped and Co-doped ZnS quantum dots have been studied using absorption spectra. TEM results show that undoped and Co-doped ZnS nanoparticles exhibit a uniform size distribution with average size of 2.5–3.4 nm.     

One-pot synthesis of ZnS/polymer composites in supercritical CO2-ethanol solution and their applications in degradation of dyes

A facile method to decorate the polymeric hollow spheres with ZnS nanoparticles has been presented. In this method, the precursors, Zn(Ac)(2)H(2)O and CH(3)CSNH(2), were first adsorbed by the polymer substrate in supercritical CO(2)-ethanol solution at 35 degrees C. Followed by heating the mixture at 100 degrees C for 2 h, ZnS/polymer composites were obtained. The as-produced ZnS/polymer composites were characterized by means of IR spectra, X-ray diffraction, transmission electron microscopy, high-resolution transmission electron microscopy. It was demonstrated that crystalline ZnS nanoparticles with size of 3-5 nm were uniformly decorated on the polymer spheres under suitable conditions. The resultant ZnS/polymer composites exhibited high efficiency for degrading eosin B, methyl orange and methylene blue under UV light irradiation.     

Preparation of cellulose-based fluorescent materials using Zinc sulphide quantum dot-decorated graphene by a one-step hydrothermal method

Cellulose-based fluorescent materials using Zinc sulphide (ZnS) quantum dot-decorated graphene were prepared by a one-step hydrothermal method. X-ray photoelectron spectroscopy analysis identified the chemical states of Zn, S, C, O, and N in the composite paper. Transmission electron microscopy showed that the graphite oxide was reduced to graphene sheets, and ZnS nanoparticles (<10 nm) were deposited on the surface of these sheets. Scanning electron microscopy indicated that graphene sheets were attached to the surface of paper fibers, and the paper structure and morphology of the fibers were not observably damaged during the hydrothermal reaction. The cellulose-based composite had strong ultraviolet absorption in the range of 200–340 nm, and its main absorption peak was at approximately 296 nm. The band edge emission of photoluminescence spectrum of the composite occurred at 466 nm with an excitation wavelength of 320 nm. The laser scanning confocal microscope image of the composite exhibited an intense blue fluorescence under UV light at 405 nm.     

Dithiol-mediated immobilization of CdS nanoparticles from reverse micellar system onto Zn-doped silica particles and their high photocatalytic activity

Cds nanoparticles, prepared in a reverse micellar system, were immobilized directly onto alkanedithiol-modified Zn-doped silica particles, which were themselves prepared via hydrolysis of tetraethylorthosilicate in the presence of Zn(NO(3))(2) followed by contact with dithiol molecules. The resulting CdS-Zn-SiO(2) composite was then used as a photocatalyst for the generation of H(2) from 2-propanol aqueous solution. Under UV irradiation (lambda>300 nm), a high photocatalytic activity was observed for the CdS-Zn-SiO(2) composite material. This is effected by electron transfer from the photoexcited ZnS (dithiol-bonded Zn on SiO(2)) to CdS nanoparticles. The photocatalytic activity is increased with a decrease in the number of methylene groups in the dithiol molecules, according to the rank order 1,10-decanedithiol <1,6-hexanedithiol <1,2-ethanedithiol.     

Zinc oxide prepared by homogeneous hydrolysis with thioacetamide, its destruction of warfare agents, and photocatalytic activity

Zinc sulfide (ZnS) nanoparticles were prepared by homogeneous hydrolysis of zinc sulfate and thioacetamide (TAA) at 80 degrees C. After annealing at a temperature above 400 degrees C in oxygen atmosphere, zinc oxide (ZnO) nanoparticles were obtained. The ZnS and ZnO nanoparticles were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), and Brunauer-Emmett-Teller (BET)/Barrett-Joyner-Halenda (BJH) methods were used for surface area and porosity determination. The photocatalytic activity of as-prepared zinc oxide samples was determined by decomposition of Orange II dye in aqueous solution under UV irradiation of 365 nm wavelength. Synthesized ZnO were evaluated for their non-photochemical degradation ability of chemical warfare agents to nontoxic products.     

Synthesis and characterization of ultrahigh crystalline TiO2 nanotubes

Ultrahigh crystalline TiO2 nanotubes were synthesized by hydrogen peroxide treatment of very low crystalline titania nanotubes (TiNT-as prepared), which were prepared with synthesized TiO2 nanoparticles by hydrothermal methods in an aqueous NaOH solution. Thus, prepared ultrahigh crystalline TiO2 nanotubes (TiNT-H2O2) showed comparable crystallinity with high crystalline TiO2 nanoparticles. The details of nanotubular structures were elucidated by high resolution-transmission electron microscopy (HR-TEM), field emission-scanning electron microscopy (FE-SEM), energy-dispersive X-ray analysis in transmission electron microscopy (TEM-EDX), X-ray diffraction (XRD), photoluminescence (PL), and BET surface area. TiNT-H2O2 was found to be a multiwalled anatase phase only with an average outer diameter of approximately 8 nm and an inner diameter of approximately 5 nm and grown along the [001] direction to 500-700 nm long with an interlayer fringe distance of ca. 0.78 nm. The photocatalytic activity of TiNT-H2O2 was about 2-fold higher than those of TiNT-as prepared, synthesized TiO2 nanoparticles, and TiO2-P25 (Degussa) in the photocatalytic oxidation of trimethylamine gas under UV irradiation.     

Molten-salt Synthesis and Properties of ZnS with Hexagonal Prism Morphology

ZnS with hexagonal prism morphology has been synthesized successfully by molten-salt method with ZnS nanoparticles as precursors, and the ZnS nanoparticles were prepared by one-step solid-state reaction of Zn（CH3COO）2·2H2O with Na2S·9H2O at ambient temperature. Crystal structure and morphology of the product were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and HRTEM. Ultraviolet-visible optical absorption spectrum of the ZnS hexagonal prism shows a distinct red shift from that of bulk ZnS crystals and photoluminescence spectrum exhibits strong emissions at 380 and 500 nm, respectively. Further experiments were designed and the formation mechanism of the ZnS hexagonal prism has been also discussed in brief.     

Dithiol-mediated incorporation of CdS nanoparticles from reverse micellar system into Zn-doped SBA-15 mesoporous silica and their photocatalytic properties

CdS nanoparticles, as prepared in reverse micellar systems, were incorporated into alkanedithiol-modified Zn-doped SBA-15 mesoporous silica (dtz.sbnd;ZnSBA-15; pore diameter, ca. 4 nm), which were themselves prepared via hydrolysis of tetraethylorthosilicate (TEOS) in the presence of Zn(NO(3))(2) and triblock copolymer, as a nonsurfactant template and pore-forming agent, followed by contact with dithiol molecules. A particle-sieving effect for the dtz.sbnd;ZnSBA-15 was observed, in that the incorporation of the nanoparticles was remarkably decreased with increasing the nanoparticle size. The resulting CdSz.sbnd;ZnSBA-15 composite was then used as photocatalysts for the generation of H(2) from 2-propanol aqueous solution. Under UV irradiation (lambda>300 nm), a high photocatalytic activity was observed for this composite material. This is effected by electron transfer from the photoexcited ZnS (dithiol-bonded Zn on SBA-15) to CdS nanoparticles. The photocatalytic activity is increased with a decrease in the number of methylene groups in the dithiol molecules, according to the rank order 1,10-decanedithiol < 1,6-hexanedithiol < 1,2-ethanedithiol.     

Architecture of linear arrays of fluorinated co-oligomeric nanocomposite-encapsulated gold nanoparticles: a new approach to the development of gold nanoparticles possessing an extremely red-shifted absorption characteristic

Fluoroalkyl end-capped co-oligomeric nanoparticles, which were prepared by the reaction of fluoroalkanoyl peroxide with 2-acrylamido-2-methylpropanesulfonic acid (AMPS) and 1-hydroxy-5-adamantylacrylate (Ad-HAc), were applied to the preparation of novel fluorinated co-oligomeric nanocomposite-encapsulated gold nanoparticles. These fluorinated gold nanocomposites were easily prepared by the reductions of gold ions with poly(methylhydrosiloxane) (PMHS) in the presence of the corresponding fluorinated nanoparticles and tri -n-octylamine (TOA) in 1,2-dichloroethane (DE) at room temperature. These fluorinated gold nanoparticles were isolated as wine-red powders and were found to exhibit good dispersibility in a variety of traditional organic solvents such as DE, methanol, and t-butyl alcohol to afford transparent wine-red solutions. The morphology and stability of these fluorinated co-oligomeic nanocomposite-encapsulated gold nanoparticles were characterized using transmission electron microscopy (TEM), dynamic light scattering measurements (DLS), and UV-vis spectroscopy. DLS measurements and UV-vis spectroscopy showed that these particles are nanometer-size-controlled very fine nanoparticles (185-218 nm) that exhibit a plasmon absorption band at around 530 nm. TEM images also showed that gold nanoparticles are tightly encapsulated into fluorinated co-oligomeric nanoparticle cores. Interestingly, these fluorinated co-oligomeric nanocomposites-encapsulated gold nanoparticles were found to afford linear arrays of these fluorinated nanoparticles with increases in the feed amounts of TOA. More interestingly, these fluorinated gold nanoparticles were able to afford the extremely red-shifted plasmon absorption band at around 960 nm.     

核壳结构CdS/ZnS纳米微粒的制备与光学特性

CdS and CdS/ZnS core-shell structure nano particles were synthesized in micro emulsion, and characterized by X-ray diffraction(XRD), transmission electron microscopy (TEM), UV absorption spectra and PL. The average diameter of CdS was about 3.3 nm, and CdS/ZnS core-shell structure was confirmed by XRD and UV. Considering the optical properties of CdS/ZnS core-shell structure nanoparticles which have different ZnS shell thickness, the UV absorption edge of CdS/ZnS becomes as lightred-shift with the thickness of ZnS layer increasing, and the absorption of shortwave band is strongly enhanced at the same time. The PL spectra indicate that ZnS shell layer can greatly eliminate surface defects of CdS nanoparticles and make its band-edge directed recombination increased, and the luminous efficiency of CdS is improved greatly when it has appropriate shell thickness.     

ESR and photoluminescence properties of Cu doped ZnS nanoparticles

Nanoparticles of Zn1-xCuxS with Cu concentrations of x=0.0, 0.1, 0.2, 0.3 and 0.4 were prepared by a co-precipitation reaction method from homogeneous solutions of zinc and copper salts. Both the ZnS and ZnS:Cu nanoparticles excited at about 370 nm exhibits a broad green emission band peaking around 491 nm, which confirms the characteristic feature of Zn2+ as well as Cu2+ ions as luminescent centers in the lattice. The TEM micrographs showed spherical morphology for ZnS nanocrystals and the average size of the particles was estimated to be around 8.5 nm. At liquid nitrogen temperature, ESR signal characteristic of Cu2+ ions was observed in samples of all concentrations. ESR spectra analysis also indicated that Cu2+ ions enter the host lattice by replacing Zn2+ ions with distorted tetrahedral site symmetry.     

硫化锌纳米空心球：合成及光学性质研究

Cubic ZnS hollow nanospheres have been prepared by a simple and template-free solvothermal method. The reaction was accomplished between Zn powder and the in-situ prepared S8. The results of X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) show that the ZnS hollow spheres are composed of ultrafine nanoparticles. The average diameters of the hollow nanospheres are about 100 nm. Their photoluminescence (PL) spectra indicate that they have excellent optical properties.     

A new solid-phase nanoparticle FRET assays based on GO/CS/ZnS nanocomposite film and developed in sensing for bromonium ion

Composite thin films consisting of nano-sized ZnS particles dispersed in chitosan/GO films have been prepared by in-situ method. The films obtained were characterized by FTIR and UV–Vis spectroscopy. The ZnS nanoparticles with 90 nm in diameter were dispersed uniformly in the film matrix. Optical absorption peak due to the size of ZnS particles was observed around 350 nm. The fluorescence emission at 430 nm of the GO/CS/ZnS nanocomposite films is very sensitive to the presence of bromonium ion from aqueous solutions. New solid-phase nanoparticles FRET assays are firstly immobilized on the substrate and then interacted with functionalized acceptor molecules in the solution to trigger the FRET effect to detect Br^–.     

Ru(bpy)_3 掺杂的核壳型 Ag@SiO_2 荧光纳米粒子的制备及表征

利用反相微乳液法制备了一种三联吡啶钌掺杂的核壳型Ag@SiO2纳米粒子。利用透射电子显微镜、荧光光谱和紫外-可见光谱等对其进行表征,并对其光稳定性和表面氨基进行了测定,结果表明该纳米粒子单分散性良好,呈规则球状、粒径为(60±5)nm,由于银的金属增强荧光效应,相对没有银核的Ru(bpy)3掺杂的SiO2纳米粒子,其荧光强度增强了2倍,光稳定性也有所提高。     

Templating CdSe tetrapods at the air/water interface with POPC lipids

ZnS nanoparticles were precipitated in aqueous dispersions of cationic surfactant cetyltrimethylammonium bromide (CTAB). The sphere radii of ZnS nanoparticles calculated by using band-gap energies steeply decreased from 4.5 nm to 2.2 nm within CTAB concentrations of 0.4-1.5 mmol L(-1). Above the concentration of 1.5 mmol L(-1), the radii were stabilized at R=2.0 nm and increased up to R=2.5 nm after 24 h. The hydrodynamic diameters of CTAB-ZnS structures observed by the dynamic light scattering (DLS) method ranged from 130 nm to 23 nm depending on CTAB concentrations of 0.5-1.5 mmol L(-1). The complex structures were observed by transmission electron microscopy (TEM). At the higher CTAB concentrations, ZnS nanoparticles were surrounded by CTA(+) bilayers forming positively charged micelles with the diameter of 10nm. The positive zeta-potentials of the micelles and their agglomerates were from 16 mV to 33 mV. Wurtzite and sphalerite nanoparticles with R=2.0 nm and 2.5 nm covered by CTA(+) were modeled with and without water. Calculated sublimation energies confirmed that a bilayer arrangement of CTA(+) on the ZnS nanoparticles was preferred to a monolayer.