A New Fluorescent Chemosensor for Metal Ions Based upon 1,8‐Naphthalimide and 8‐Hydroxyquinoline

A new fluorescent chemosensor based upon 1,8‐naphthalimide and 8‐hydroxyquinoline was synthesized, and its fluorescent properties in the presence of different metal cations (Hg²⁺, Ag⁺, Zn²⁺, Fe²⁺, Cd²⁺, Pb²⁺, Ca²⁺, Cu²⁺, Mg²⁺, and Ba²⁺) were investigated. It displayed fluorescence quenching with some heavy and transition metal (HTM) ions, and the quenching strongly depended on the nature of HTM ions.     

Photoactive chemosensors 4: a Cu protein cavity mimicking fluorescent chemosensor for selective Cu recognition

Fluorescent chemosensor 3 can sense Cu²⁺ ions (1-8 μM) even in the presence of elevated levels of Ni²⁺, Cd²⁺, Zn²⁺, Hg²⁺, Ag⁺ and Pb²⁺ (5000 μM). 3 can also analyze for Ag⁺ ions (50-500 μM) in the presence of Ni²⁺, Cd²⁺, Zn²⁺, Hg²⁺ and Pb²⁺ (5000 μM) but Cu²⁺ strongly interferes.     

Effect of Solvent on Competitive Bulk Membrane Transport of Transition and Post Transition Metal Cations Using Decyl-18-crown-6

A series of competitive metal ion transport experiments have been performed. Each involved transport from an aqueous source phase across an organic membrane phase into an aqueous receiving phase. The source phase contained equimolar concentrations of cobalt(II), nickel(II), cupper(II), zinc(II), cadmium(II), silver(I) and lead(II) metal cations. The membrane phase incorporated ionophore, decyl-18-crown-6. The membrane solvents include: chloroform, dichloromethane, 1,2-dichloroethane, nitrobenzene and chloroform–nitrobenzene binary solvents. A good transport efficiency and selectivity of Pb²⁺ transport from aqueous solutions are observed in this investigation. The selectivity order for competitive bulk liquid membrane transport of the studied transition and post transition metal cations through chloroform is: Pb²⁺>Co²⁺>Ni²⁺>Ag⁺>Cd²⁺, but in the case of dichloromethane, 1,2-dichloroethane and nitrobenzene as liquid membranes, the selectivity sequences were found to be: Pb²⁺>Co²⁺>Cd²⁺>Cu²⁺>Ag⁺>Ni²⁺>Zn²⁺, Pb²⁺>Co²⁺>Ag⁺>Ni²⁺>Zn²⁺ and Pb²⁺>Co²⁺>Ni²⁺>Zn²⁺>Cd²⁺>Ag⁺, respectively. The transport rate of the metal cations in chloroform–nitrobenzene binary solvents is sensitive to the solvent composition. The transport processes were studied in absence and presence of the stearic acid and the results show that the sequence of selectivities and ion transport rates change in the presence of stearic acid.     

A new fluorescent sensor bearing three dansyl fluorophores for highly sensitive and selective detection of mercury(II) ions

A novel fluorometric sensor bearing three dansyl moieties based on tris[2-(2-aminoethylthio)ethyl]amine was prepared by a simple approach using a conventional two-step synthesis. The sensor exhibits highly Hg²⁺-selective ON-OFF fluorescence quenching behavior in aqueous acetonitrile solutions and is shown to discriminate various competing metal ions, particularly Cu²⁺, Ag⁺, and Pb²⁺ as well as Ca²⁺, Cd²⁺, Co²⁺, Fe³⁺, Mn²⁺, Na⁺, Ni²⁺, and Zn²⁺, with a detection limit of 1.15 × 10⁻⁷ M or 23 ppb.     

Study on the synthesis of novel fluorescent macrocyclic sensors and their sensitive properties for Cu2+ and Fe3+ in aqueous solution

In this work, we synthesised and characterised three novel fluorescence macrocyclic sensors containing optically active dansyl groups. The studies for the interaction of the synthesised compounds with various mental ions (Li⁺, Na⁺, K⁺, Ag⁺, Mg²⁺, Ca²⁺, Ba²⁺, Pb²⁺, Zn²⁺, Co²⁺, Cd²⁺, Hg²⁺, Ni²⁺, Cu²⁺, Mn²⁺, Cr³⁺, Al³⁺, Fe³⁺) were performed by fluorescence titration, Job’s plot, ESI-MS and DFT calculations. The results showed that the sensors 1a–1c displayed selective recognition for Cu²⁺ and Fe³⁺ ions and formed stoichiometry 1:1 complex through PET mechanism in DMSO/H₂O solution (1:1, v/v, pH 7.4 of HEPES). The binding constant (K) and detection limit were calculated.     

Exploiting the deprotonation mechanism for the design of ratiometric and colorimetric Zn fluorescent chemosensor with a large red-shift in emission

The design, synthesis, and photophysical evaluation of a new naphthalimide-based fluorescent chemosensor, N-butyl-4-[di-(2-picolyl)amino]-5-(2-picolyl)amino-1,8-naphthalimide (1), were described for the detection of Zn²⁺ in aqueous acetonitrile solution at pH 7.0. Probe 1 showed absorption at 451 nm and a strong fluorescence emission at 537 nm (Φ_F=0.33). The capture of Zn²⁺ by the receptor resulted in the deprotonation of the secondary amine conjugated to 1,8-naphthalimide so that the electron-donating ability of the N atom would be greatly enhanced; thus probe 1 showed a 56 nm red-shift in absorption (507 nm) and fluorescence spectra (593 nm, Φ_F=0.14), respectively, from which one could sense Zn²⁺ ratiometrically and colorimetrically. The deprotonated complex, [(1-H)/Zn]⁺, was calculated at m/z 619.1800 and measured at m/z 618.9890. In contrast to these results, the emission of 1 was thoroughly quenched by Cu²⁺, Co²⁺, and Ni²⁺. The addition of other metal ions such as Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, Fe³⁺, Mn²⁺, Al³⁺, Cd²⁺, Hg²⁺, Ag⁺, and Pb²⁺ produced a nominal change in the optical properties of 1 due to their low affinity to probe 1. This means that probe 1 has a very high fluorescent imaging selectivity to Zn²⁺ among metal ions.     

Study of Bulk Membrane Transport of Some Heavy Metal Cations Using Three Macrocyclic Ligands Containing Oxygen and Nitrogen Heteroatoms

The transport experiments of Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Ag⁺ and Pb²⁺ metal cations were carried out by dibenzo-18-crown-6 (DB18C6), dibenzyl-diaza-18-crown-6 (Dibenzyl-diaza-18C6) and di-tert-butyl-dibenzo-18-crown-6 (Di-tert-butyl-DB18C6) using chloroform (CHCl₃), 1,2-dichloroethane (1,2-DCE) and nitrobenzene (NB) organic solvents as liquid membranes. The source phase contained equimolar concentration of these metal cations and the source and receiving phases being buffered at pH=5 and pH=3, respectively. The obtained results show that the selectivity and the efficiency of transport for these heavy metal cations change with the nature of the ligand and also the organic solvents, which were used as liquid membranes in these experiments. A good selectivity was observed for silver (I) ion by dibenzyl-diaza-18C6 in all membrane systems. Dibenzo-18C6 and di-tert-butyl-DB18C6 showed the highest transport efficiency for cobalt (II) ion. The effect of stearic acid on transport efficiency was also investigated and the results show that the efficiency of transport of the heavy metal cations increases in the presence of this organic acid.     

Simple imine linked colorimetric and fluorescent receptor for sensing Zn ions in aqueous medium based on inhibition of ESIPT mechanism

Herein, we report the highly selective binding of Zn²⁺ ion by the salicylaldimine based Schiff base chromogenic receptor 1 [(N,N′-bis (salicylidine)-o-phenylenediamine]. Receptor 1 senses Zn²⁺ ion in aqueous medium by colorimetric and fluorescent response in the presence of other metal ions like Pb²⁺, Hg²⁺, Sn²⁺, Cd²⁺. Receptor 1 on binding with Zn²⁺ ion exhibits fluorescence enhancement which is due to the inhibition of the (ESIPT) mechanism.     

Complexes of Di‐ and Triazacrown Ethers with Heavy Metal Ions in Water Solution

This research concerns the analysis of the metal ion binding of benzo‐ and pyridine‐azacrown ether compounds of different structures and sizes by potentiometric method. The ligands are able to form 1 : 1 complexes with heavy metal ions (Cu⁺², Pb⁺², Cd⁺², Ag⁺, Ni⁺², Zn⁺²) in water of middle or high stability. To understand the selectivity in cation binding, different factors were considered.     

Synthesis, complex-formation, and extracting ability of new derivatives of dithia-13(16)-crown-4(5) ethers

Various methods of synthesizing functional derivatives of dithia-13(16)-crown-4(5) ethers are proposed. Complex-formation of the obtained compounds with Ag⁺ and Pb²⁺ ions has been studied using ¹H NMR. A radiometric method was used to investigate the extracting ability of substituted dithia-13(16)-crown-4(5) ethers in relation to Ag⁺ and Cd²⁺ ions from aqueous solution in the presence of anions of various degree of hardness, with determination of the metal content. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 2, pp. 233–243, February, 2006.     

Electrically induced fluorescence Fe sensing behavior of nanostructured Tiron doped polypyrrole

Nanostructured polypyrrole (PPy) film doped with Tiron was electrodeposited from aqueous solution on the surface of transparent electrode and used for sensitive, selective and rapid electrically controlled fluorescence detection of Fe³⁺ in aqueous media. The fluorescence intensity of PPy-Tiron film decreases linearly in the presence of Fe³⁺ by applying negative potential over a concentration range from 5.0 × 10⁻⁸ to 1.0 × 10⁻⁶ mol L⁻¹, with a relatively fast response time of less than 30 s at pH 7.4. The detection is not affected by the coexistence of other competitive metal ions such as Al³⁺, Ce³⁺, Tl³⁺, La³⁺, Bi³⁺, Cr²⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Pb²⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺. The proposed electro-fluorescence sensor has a potential application to the determination of Fe³⁺ in environmental and biological systems. The fluorescent thin film sensor was also used as a novel probe for Fe³⁺/Fe²⁺ speciation in aqueous solution.     

铜转运蛋白C端金属结合域与Ag+及Hg2+的相互作用

铜转运蛋白(CTR1)不仅参与铜的细胞摄取,而且在其它重金属离子的摄取过程中也发挥重要作用. 本文采用紫外-可见(UV-Vis)光谱,核磁共振(NMR)和质谱(MS)的方法,研究了人源CTR1 (hCTR1)的C端金属结合域(C8)与Ag⁺和Hg²⁺的相互作用. 研究表明,Ag⁺和Hg²⁺都能与C8结合,但二者与C8的结合机制明显不同. 每个C8分子可以结合两个Ag⁺离子,但一个Hg²⁺却可以与两个C8形成桥联. 此外,Ag⁺离子与C8的配位是一个中等速度的交换过程,而Hg²⁺离子则为快速交换过程. C8的半胱氨酸残基是两种离子的重要结合位点,同时组氨酸残基也参与两种金属离子的配位,其中Ag⁺优先结合组氨酸,而Hg²⁺则对半胱氨酸的结合具有显著的优势. 虽然HCH基序对C8 与金属配位至关重要,一些远端的其它氨基酸也可以参与C8 与银离子的配位,这可能与CTR1 在摄取Ag⁺过程中的金属转移机制相关. 这些结果为理解hCTR1 蛋白摄取重金属离子的作用机制提供了必要的信息.     

基于苯并噻唑Zn2+荧光探针及其细胞造影应用

设计合成基于苯并噻唑Zn²⁺荧光增强型探针BHP,在HEPES缓冲液中测其对Zn²⁺识别性能。实验结果表明,BHP对Zn²⁺有较高的选择性,对其他金属离子如Cd²⁺,Fe²⁺,Ni²⁺,Pb²⁺,Hg²⁺,Al³⁺,Mn²⁺,Ag⁺,Cu²⁺,Co²⁺,Na⁺,K⁺,Mg²⁺和Ca²⁺无明显荧光增强响应。BHP与Zn²⁺按1：1计量比配位,在生理条件下荧光强度不受pH值影响。在HeLa细胞中对Zn²⁺的造影表明BHP可用于生物体Zn²⁺检测。     

An acyclic,dansyl based colorimetric and fluorescent chemosensor for Hg(II) via twisted intramolecular charge transfer (TICT)

An efficient fluorescent chemosensor for Hg²⁺ ion, based on 5-(dimethylamino)-N-(2-mercaptophenyl)naphthalene-1-sulfonamide, has been developed. It exhibits Hg²⁺-selective on–off fluorescence quenching behavior via twisted intramolecular charge transfer (TICT) mechanism, which is rationalized by time dependent density functional theory (TD-DFT) calculations. The system exhibits visible color change from colorless to gray upon Hg²⁺ binding with very high selectivity and sensitivity (as low as 5.0 × 10⁻¹⁰ mol L⁻¹) over other metal ions such as K⁺, Na⁺, Ag⁺, Mn²⁺, Ca²⁺, Ba²⁺, Fe²⁺, Zn²⁺, Pb²⁺, Cu²⁺, Sn²⁺, Cd²⁺, Ni²⁺ and Co²⁺. The present sensing system is also successfully applied for the detection of Hg²⁺ ion in real samples.     

A highly selective fluorescent chemosensor for Fe (III) based on rhodamine 6G dyes derivative

A new fluorescent probe L based on the rhodamine 6G platforms for Fe³⁺ has been designed and synthesised. L showed excellent selectivity and high sensitivity for Fe³⁺ against other metal ions such as K⁺, Na⁺, Ag⁺, Cu²⁺, Co²⁺, Mg²⁺, Cd²⁺, Ni²⁺, Zn²⁺, Fe²⁺, Hg²⁺, Ce³⁺ and Y³⁺ in HEPES buffer (10 mM, pH 7.4)/CH₃CN (40:60, V/V). The distinct color change and the rapid emergence of fluorescence emission provided naked-eyes detection for Fe³⁺. The recognition mechanism of the probe toward Fe³⁺ was evaluated by Job’s plots, IR and ESI-MS. In order to further study their fluorescent properties, L + Fe³⁺ fluorescence lifetime was also measured. Moreover, the test strip results showed that these probes could act as a convenient and efficient Fe³⁺ test kit.     

Fluorescent oligomer as a chemosensor for the label-free detection of Fe and dopamine with selectivity and sensitivity

In this article, a sensitive and selective turn-off fluorescence chemosensor, Tyloxapol (one kind of water soluble oligomer), was developed for the label-free detection of Fe³⁺ ions in aqueous solution. Fluorescence (FL) experiments demonstrated that Tyloxapol was a sensitive and selective fluorescence sensor for the detection of Fe³⁺ directly in water over a wide range of metal cations including Na⁺, K⁺, Ag⁺, Hg²⁺, Cd²⁺, Co²⁺, Cu²⁺, Cr³⁺, Mn²⁺, Ba²⁺, Zn²⁺, Ni²⁺, Mg²⁺, Ca²⁺, and Pb²⁺. Moreover, the fluorescence intensity of Tyloxapol has shown a linear response to Fe³⁺ in the concentration range of 0–100 μmol L⁻¹ with a detection limit of 2.2 μmol L⁻¹ in aqueous solution. Next, based on a competition mechanism, another turn-on sensing application of the Tyloxapol/Fe³⁺ platform to probe dopamine (DA) against various other biological molecules such as other neurotransmitters or amino acids (norepinephrine bitartrate, acetylcholine chloride, alanine, valine, phenylalanine, tyrosine, leucine, glycine, histidine) were also investigated. It is expected that our strategy may offer a new approach for developing simple, cost-effective, rapid and sensitive sensors in biological and environmental applications.     

1,8-萘酰亚胺为发色团的Zn2+荧光探针的合成及性能研究

合成了以1,8-萘酰亚胺为发色团,以联吡啶为离子受体的Zn²⁺荧光探针,并进行了表征及离子识别性能的研究。研究表明该化合物对Zn²⁺具有良好的识别性能,同时相对于Ca²⁺, Cd²⁺, Co²⁺, Cu²⁺, Hg²⁺, Fe³⁺, Mn²⁺, Ni²⁺, Pb²⁺等金属离子具有良好的选择性。     

Spectrophotometric study of complexation of dibenzopyridino-18-crown-6 with some transition and post-transition metal ions in DMSO solution using murexide as a metallochromic ligand

The complexation reaction of dibenzopyridino-18-crown-6 (DBPY 18C6) with Co²⁺, Cu²⁺, Zn²⁺, Pb²⁺, Cd²⁺, Hg²⁺, and Ag⁺ have been studied in DMSO at 25°C by the spectrophotometric method. Murexide was used as a competitive colored ligand. The stoichiometry of metal ion-murexide and metal ions with DBPY18C6 complexes were estimated by mole ratio and continuous variation methods and emphasized by the KINFIT program. The stoichiometry of all the complexes was found to be 1: 1 (metal ion/ligand). The order of stability constants for the obtained metal ion-murexide complexes (1: 1) varies in the order Cu²⁺ > Cd²⁺ > Co²⁺ ∼ Pb²⁺ > Zn²⁺ > Ag⁺ > Hg²⁺. This trend shows that the transition metal ions clearly obey the Irving-Williams role. For the post-transition metal ions, the ionic radius and soft-hard behavior was the major affects in varying of this order. The dibenzopyridino-18-crown-6 complexes with the used metal ions vary as Ag⁺ > Pb²⁺ > Cu²⁺ > Cd²⁺ > Hg²⁺ > Zn²⁺ > Co²⁺. The article is published in the original.     

Synthesis and applications of (5-substituted benzimidazolo)-benzo-15-crown-5 and 4,4′-bis-benzimidazolo-dibenzo-15-crown-5 for the colorimetric detection of Au3+

In the present work, we have reported the synthesis of benzimidazoles functionalized crown ether derivatives of 4-formyl benzo-15-crown-5/4,4′-diformyl dibenzo-15-crown-5 and substituted diamine pyridine using sulfamic acid as a catalyst in DMSO. These molecules are used for the colorimetric determination of Au³⁺ selectively among other metal cations such as Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Pb²⁺, Hg²⁺, Au³⁺ and Ag⁺ ions_.