三种测量橡胶交联密度的核磁共振方法比较

核磁共振（NMR）技术已经成为测量橡胶交联密度的一种常用技术手段．该文探讨了用于测量橡胶交联密度的三种NMR方法：¹H双量子（DQ）NMR、¹H Hahn回波和¹H CPMG回波,讨论了这些方法测量值差异的来源．在此基础上进一步研究了¹H CPMG回波方法中回波时间对测量值的影响,探讨了改善¹H CPMG回波方法的方案．     

3,3'-对亚苯基-双(7-异丙氧基香豆素)的1H NMR研究

3,3'-对亚苯基-双(7-异丙氧基香豆素)是一种首次合成的化合物,可用作荧光增白剂.本文通过测定该化合物在CDCl₃、DMSO-d₆溶剂中的¹H NMR,研究溶剂对其¹H NMR的影响.     

α,α'-二氧代烯酮环二硫代缩酮的NMR研究

报道标题化合物的NMR谱,利用¹H,¹³C NMR和DEPT等技术确定新化合物的化学结构,并归属了所有质子和碳的化学位移.     

4,5-二氮杂芴-9-酮2-萘甲酰腙(HL)及其配合物PbL2的NMR研究

本文报道了4,5-二氮杂芴-9-酮2-萘甲酰腙(HL)及其配合物PbL₂的合成及其¹H和¹H-¹H COSYNMR表征.在PbL₂中配体以烯醇式配位;由于受到亚胺氮孤对电子的屏蔽,二氮杂芴环上的质子具有不等价性。     

WATR法测量稀水溶液的1H-NMR谱

本文讨论了用WATR法消除稀水溶液中的水共振峰,进行¹H-NMR谱测定的原理、影响T₂的因素及应用实例。WATR法是在水溶液中加入氯化胺、盐酸羟胺和盐酸胍等水质子交换试剂以降低水质子的T₂,然后用CPMG脉冲系列来测定¹H-NMB谱。本法最适用于稀水溶液中处于水共振峰内或附近的样品的共振峰的测定,还可测定稀水溶液中¹⁵N-¹H的化学位移及耦合常数,到目前为止尚未见有这方面的报导。     

水/甲醇混合溶剂中PNIPAAM相变行为的NMR研究

通过液体核磁共振（NMR）谱以及动力学参数测量研究了聚N-异丙基丙烯酰胺（PNIPAAM）在水和甲醇的混合溶液中的相变行为. 通过PNIPAAM在水和甲醇混合溶剂中¹H核磁共振谱、纵向弛豫时间T₁、横向弛豫时间T₂和自扩散系数D随甲醇含量的变化发现,大分子在发生相变时,在¹H核磁共振谱中伴随有宽峰的出现和消失,同时弛豫时间和自扩散系数均有显著变化. 实验结果表明,¹H NMR谱图以及弛豫时间和自扩散系数等多种核磁共振参数可以用来灵敏表征PNIPAAM在水和甲醇混合溶液中的相变行为     

天然结晶辣椒碱的NMR谱研究

用一维¹H NMR谱、¹H-¹H COSY谱和一维¹³C NMR谱、DEPT谱研究辣椒碱分子和二氢辣椒碱分子及其混合物,得到¹H和¹³C的化学位移,采用¹H NMR谱测定天然辣椒碱中辣椒碱和二氢辣椒碱的相对含量.     

通过HSQC和1H,13C-COSY叠合增强二维谱分辨率的方法

通常二维谱F₁维分辨率较差,F₂维分辨率较好. 即HSQC实验¹³C维度分辨率较差,¹H维度分辨率较好. 而¹H, ¹³C-COSY实验¹³C维度分辨率较好,¹H维度分辨率较差. 提出一种通过HSQC和¹H, ¹³C-COSY叠合,取较弱的值储存并显示的方法增强分辨率,采用Bruker Topspin软件AU程序实现. 该方法在不明显增加采样时间的情况下,可显著增强分辨率,信噪比也没有降低. 同时抑制了F₁噪声. 处理后,谱图美观清晰.     

表面活性剂CTAB水溶液中的T2弛豫分散研究

用CPMG脉冲序列测定了表面活性剂十六烷基三甲基溴化铵（CTAB）分子中的氮甲基(N-CH₃)质子的横向弛豫时间（T₂表观）,并发现测得的T₂表观\}与序列中的重聚脉冲间隔时间的一半τ _cp有关,说明存在横向弛豫分散现象. 当在τ_cp≤1 ms时,T₂表观与τ²_cp}呈线性关系;而当τ_cp≥4.6 ms时,T₂表观变得与τ_cp无关. 利用Luz-Meiboom两体化学交换模型计算了不同浓度的CTAB溶液中的N-CH₃质子的本征横向弛豫时间（T₂本征）和化学交换速率k_ex,发现k_ex与T₂本征和自扩散系数D一样,在临界胶束浓度（CMC）附近发生突变. 这个突变反映了CTAB分子在从单体到胶束的转变过程中其动力学特性发生了改变.      

猕猴桃的磁共振成象及核磁共振定域波谱研究

以猕猴桃鲜果为样品,在4.7T核磁共振成象仪上测量了质子密度象、扩散系数D的分布象、纵向弛豫时间T₁分布象和横向弛豫时间TT₂分布象,得到了鲜果不同部位的TT₁、TT₂和D的值,此外还进行了抑制水峰的定域波谱测量.所测得的定域波谱与猕猴桃果汁的¹H高分辨核磁共振(NMR)谱进行了比较和归属.无损地获得了有关猕猴桃的形态结构和物质组成的一些信息.     

180° Pulse Imperfection Effects on Fitting of Relaxation Curves Obtained by Low Field NMR Spectroscopy

Low field NMR spectroscopy is well adapted to the study of heterogeneous media, such as those found in the food industry or in life sciences, because it does not require preparation of samples.

CPMG relaxation curves obtained with different pulse spacing times, on samples without exchange phenomenon, are not superimposable. We show that this phenomenon, due to pulse imperfections at 180°, is not a single drift; pulses reach a stationary regime towards the 80^th pulse; values of T₂ of the order of milliseconds, are then a bit perturbed. For the same reason, with a liquid sample, the total signal of a CPMG curve does not exactly correspond to the total signal obtained with a FID curve. With some fitting programs, by iterating on the value of the offset in order to minimise the standard deviation of the relaxation curve fitting, it is no longer necessary to know the value of the baseline of the CPMG relaxation curves; it enables one to better sample the first part of the curve.     

基于FPGA的核磁共振测井仪控制逻辑设计

核磁共振（NMR）测井仪以CPMG脉冲序列为测量基础,按照CPMG脉冲序列的时序要求完成大功率射频脉冲的发射和微弱回波信号的接收, 在脉冲发射完成后快速泄放天线中储存的能量. 该文介绍一种基于现场可编程门阵列(FPGA)的NMR测井仪控制逻辑和典型脉冲序列,详细说明在CPMG脉冲序列下FPGA的工作时序和流程;讨论NMR测井仪发射电路、Q-转换电路和隔离电路的控制原理和时序要求,给出各电路的控制逻辑仿真结果;最后,利用所设计的控制逻辑和自制NMR测井仪探头,在实验室条件下对水溶液进行了测量,得到满意的结果.     

Influence of Crosslink Density on Mechanical Properties of Natural Rubber Vulcanizates

Crosslink density is an important structural parameter for cured rubber. Natural rubber (NR) vulcanizates with different crosslink densities were obtained through using different sulfur and accelerator amounts and different accelerator types. The crosslink density was characterized by an ¹ H-NMR technique and its influence on mechanical properties, such as Shore A hardness, 300% modulus, tensile strength, and elongation at break, of NR vulcanizates was investigated. The results showed that both the sulfur amount and the accelerator type and amount had an influence on the crosslink density of the NR networks. The relationship between total crosslink density and mechanical properties was also studied. The results, by changing either the sulfur or the accelerator amount, showed that tensile strength of NR vulcanizates reached maximum value when the total crosslink density was around 13.5 × 10^?5 mol/cm³, equivalently the average molecular weight of the intercrosslink chains (Mc) was around 7000 g/mol. The maximum value of tensile strength came from the balance between contributions of crosslink joints and stretch-induced orientation and/or crystallization of intercrosslink chains. The study on influence of total crosslink density on Shore A hardness and 300% modulus of NR vulcanizates showed that they both increased linearly with the crosslink density, the slopes were 2.7 ～ 3.0 cm³/10^?5 mol and 0.27 ～ 0.31 MPa cm³/10^?5 mol for Shore A hardness and 300% modulus, respectively, whether the crosslink density was varied by sulfur or accelerator.     

The interpretation of multi-exponential water proton transverse relaxation in the human and porcine eye lens

We report results of 1H NMR transverse relaxation experiments on human and porcine eye lenses. Several authors have reported that transverse relaxation is not mono-exponential when observed by the Carr-Purcell-Meiboom-Gill (CPMG) sequence and have interpreted the results by postulating the presence of "pools" of water molecules in different binding environments that do not exchange rapidly on the NMR timescale. We have compared CPMG data for intact lenses with results for lens homogenates and have combined a CPMG spectroscopic pulse train with NMR micro-imaging to study the nature of the transverse relaxation process in human and porcine lenses. Fast exchange of water protons with the lens proteins (crystallins) leads to an enhanced transverse relaxation rate that varies linearly with protein concentration. At the resolution of NMR micro-imaging the transverse relaxation process is mono-exponential. The results show that the multi-exponential CPMG data observed spectroscopically for whole lenses reflect spatial variations in crystallin content through the lens rather than the presence of distinct "bound" and "free" water pools.     

Characterisation of crosslinked elastomeric materials by 1H NMR relaxation time distributions.

One of the most critical structural parameters in elastomeric materials is the density of cross-linking between the polymeric chains. This chemical feature greatly affects chain motions and is determinant in controlling mechanical properties of the final product. NMR techniques are widely and efficiently applied to investigation of such materials. In this study we have measured both transverse and longitudinal 1H relaxation times of a series of polybutadiene rubber samples with increasing crosslink density induced by chemical treatment. This approach allowed the observation of T(1) and T(2) decrease with the increase of crosslink density in the samples examined. The data obtained have been analyzed and compared to theoretical models.     

一种改进的核磁共振测井测量脉冲序列

提出了一种可以提高核磁共振测井测量速度的新型测量脉冲序列,它基于对原有CPMG测量脉冲序列的改进.在原有的测量序列中,在一个CPMG脉冲序列结束之后,直接进行等待(T₁延时),以使磁化强度矢量能够完全恢复到平衡位置,然后再进行下一个CPMG脉冲序列的测量.由于测井仪器的连续运动,在测量含有长T₁成分的地层时,等待时间需要取得较长,使得测井速度很低.但在实际地层中,恰恰又是油气的T₁较长,这无疑给核磁共振测井带来了麻烦.作者发现,如果在一个CPMG脉冲序列结束之后在-x方向先施加一个90°脉冲(或在x方向施加一个270°脉冲),再进行等待,就能更好地使长T₁成分得到极化,从而缩短等待时间、提高测量速度.文中对这种改进后的脉冲序列进行了计算和分析,证明它确实具有一定的优越性.     

Self-diffusion measurements by a constant-relaxation method in strongly inhomogeneous magnetic fields

The simple pulse sequence thetax-tau1-2thetay-tau1+tau2-2thetay-tau2-Hahn echo used to measure the self-diffusion coefficient D under constant-relaxation condition, i.e., for tau1+tau2=const. was investigated in the presence of strongly inhomogeneous static as well as radiofrequency magnetic fields. The encoding of the Hahn-echo amplitude by the pulse flip angle and diffusion was evaluated by taking into account the spatial distribution of the off-resonance field, the strength and orientation of the local field gradients, and the pulse flip angles by a computer simulation program. As input files, this program uses maps of static and radiofrequency fields, and the D coefficient can be evaluated from the time dependence of the Hahn-echo amplitude. The method was applied to a mobile one-sided NMR sensor, NMR-MOUSE with a bar magnet by measuring D for a series of liquids with different viscosities. The method was shown to be particularly useful for measuring D of solvents in elastomers without the need for measurements of the transverse relaxation rates. The self-diffusion coefficient of toluene in a series of crosslinked natural rubber samples was measured and correlated with the crosslink density. Finally, the method was applied to measure the diffusion anisotropy of free water in bovine Achilles tendon.     

The NMR-MOUSE: quality control of elastomers.

New applications of the NMR-MOUSE (mobile universal surface explorer) to non-destructive quality control of elastomers are reported. One example concern the thermal aging of fast clutches which was probed by measurements of 1H transverse relaxation time. Novel methodological developments show that 1H double-quantum filtered NMR signals can be generated in the inhomogeneous fields of the NMR-MOUSE for characterization of residual dipolar couplings. This technique was applied to characterize reference natural rubber samples with different crosslink density and carbon black and silica fillers.     

Influence of Carbon Black on Crosslink Density of Natural Rubber

Vulcanization and reinforcement are two important factors contributing to the properties of vulcanized rubber. In order to investigate the influence of carbon black (CB) on chemical crosslinking, three groups of samples with different crosslink densities were prepared. In each group with the same crosslink density, different amounts of CB were introduced. Data fitting showed that delta torque (ΔM = M _H–M _L, the difference between the highest and lowest torques during curing) in the cure curves of each group had a good linear relationship with CB load and extrapolation of the fitting lines almost intercepted the x coordinate at the same value, which indicated that CB had no influence on the chemical crosslinking of the rubber. To verify the above result, a series of nonfilled natural rubber (NR) vulcanizates with different crosslink densities were studied using equilibrium swelling and the swelling ratios were compared with those of corresponding CB filled rubbers with the same sulfur and accelerator amount. The results of both the equilibrium swelling and NMR relaxation parameter measurements showed that CB filled vulcanizates had higher apparent crosslink densities than those of unfilled ones due to the strong interaction between rubber molecules and the surface of the CB particles. The swelling ratios of filled rubbers had a parallel relationship with those of the unfilled ones which indicated that CB had little influence on chemical crosslink density introduced by chemical vulcanization.