介观结构SiO2/CdO纳米复合物为前驱体原位水热合成半导体CdSe和CdS纳米晶

以高度有序的介观结构SiO₂/CdO纳米复合物为前驱体,在硒源或硫源存在的还原性条件下,利用原位水热反应,合成了介观结构SiO₂/CdSe及SiO₂/CdS纳米复合物,除去SiO₂后,得到半导体CdSe及CdS纳米晶.通过X射线衍射(XRD),高分辨率透射电镜(HRTEM),X射线能散射谱(EDX)及选区电子衍射(SAED)等手段对产物进行了组成和结构表征.结果表明,介观结构SiO₂主体材料在合成过程中起到了一定的形貌和尺寸限制作用,得到的CdSe和CdS均为直径在8 nm左右的类球形六方相纳米晶.     

Controlled growth and photocatalytic properties of CdS nanocrystals implanted in layered metal hydroxide matrixes

Layered double hydroxide Cd(1)(-)(x)()Al(x)()(OH)(2)(DS)(x)().3.0H(2)O (CdAlDS) and a related hydroxide salt compound Cd(2)(OH)(3)(DS).2.5H(2)O (CdDS), where DS stands for dodecyl sulfate sandwiched between two adjacent inorganic layers, have been synthesized and used as precursors for CdS nanoparticle growth. Through a gas/solid reaction, CdS nanocrystals implanted in the layer matrixes of the layered double hydroxides are grown, and the sizes of the nanocrystals vary in the range of 3-6 nm in diameter. The presence of trivalent Al cations in the layered double hydroxide can be taken advantage of to control the size of the CdS nanocrystals, and it also helps to prevent the formed nanocrystals from extraction from the solid matrixes. The nano-CdS implanted composite exhibits high photocatalytic activity for degradation of the nonbiodegradable rhodamine B under both UV and visible irradiations.     

The synthesis, structure, optical and photocatalytic properties of silica-coated cadmium sulfide nanocomposites of different shapes

The CdS nanostructure undergoes photochemical dissolution, and hence, the photocatalytic activity deteriorates with light irradiation time. A thin layer of silica coating over CdS surface may prevent the photocorrosion and coalescence of quantum size CdS particles. Hence, we synthesized SiO(2)@CdS nanocomposites of different shapes and characterized them by XRD, HRTEM, EDX, SAED, BET surface area measurement and absorption and emission study. The dispersion of spherical CdS (Cd-2.62 at% and S-2.33 at%) nanoparticles of cubic crystal structure into thick amorphous SiO(2) (43.79 at%) matrix is demonstrated here. The fabrication of core (CdS)-shell (SiO(2)) structure (SiO(2)@CdS) consisting of CdS nanorod (Cd-19.79 at% and S-22.90 at%) core (length ~126 nm and width ~6 nm) having characteristic lattice fringes of hexagonal crystals and thin SiO(2) (12.81 at%) shell (thickness=1-1.4 nm) is successfully achieved for the first time. The surface area (21.2m(2)/g) of CdS nanorod (aspect ratio=21) is found to increase (42.3m(2)/g) after SiO(2) coating. The photoluminescence of CdS nanosphere (485 nm) and nanorod (501 nm) is highly quenched after SiO(2) layer formation. The superior photocatalytic activity of SiO(2)@CdS composites for the benzaldehyde oxidation under UV irradiation has been displayed.     

聚乙烯吡咯烷酮修饰的CdS纳米晶：多元醇合成、表征和可见光活性

采用溶剂热法合成了具有不同晶粒尺寸的聚乙烯吡咯烷酮（PVP）修饰的CdS纳米晶,并运用XRD,N₂物理吸附,TEM,IR,UV-Vis等手段进行表征。结果表明,所制得的样品均为聚乙烯吡咯烷酮(PVP)修饰的CdS纳米晶;添加四甲基氢氧化铵(TMAH)有利于获得晶粒尺寸较小的CdS纳米晶;受纳米晶粒尺寸的影响,CdS纳米晶的吸收边发生蓝移且可见光催化活性明显提高。     

聚合物-二氧化硅复合基材中CdS纳米晶的合成

本文报道在Sol-gel基材中制备由聚合物稳定的CdS纳米晶的新方法， 即通过甲基丙烯酸镉与甲基丙烯酸羟乙酯共聚合合成了含有Cd 2+的聚合物微凝胶, 在聚合物微凝胶网络中原位聚合正硅酸乙酯形成聚合物互穿的Sol-gel复合基材. 再向该聚合物/二氧化硅复合基材中通入H2S气体得到CdS纳米晶. 在聚合物网络中原位聚合正硅酸乙酯可以降低纯二氧化硅材料的脆性; 另一方面, 二氧化硅可以作为增强剂增加聚合物材料的强度. 因此, 在我们合成的聚合物/二氧化硅复合基材中制备的CdS纳米晶将具有很好的应用前景.     

Exciton-plasmon interaction in a composite metal-insulator-semiconductor nanowire system

We report about the synthesis and optical properties of a composite metal-insulator-semiconductor nanowire system which consists of a wet-chemically grown silver wire core surrounded by a SiO2 shell of controlled thickness, followed by an outer shell of highly luminescent CdSe nanocrystals. With microphotoluminescence (micro-PL) experiments, we studied the exciton-plasmon interaction in individual nanowires and analyzed the spatially resolved nanocrystal emission for different nanowire length, SiO2-shell thickness, nanocrystal shape, pump power, and emission polarization. For an SiO2 spacer thickness of approximately 15 nm, we observed an efficient excitation of surface plasmons by excitonic emission of CdSe nanocrystals. For nanowire lengths up to approximately 10 microm, the composite metal-insulator-semiconductor nanowires ((Ag)SiO2)CdSe act as a waveguide for 1D-surface plasmons at optical frequencies with efficient photon outcoupling at the nanowire tips, which is promising for efficient exciton-plasmon-photon conversion and surface plasmon guiding on a submicron scale in the visible spectral range.     

Synthesis of nanocrystal-polymer transparent hybrids via polyurethane matrix grafted onto functionalized CdS nanocrystals

We reported the first synthesis of CdS nanocrystal-polymer transparent hybrids by using polyurethane (PU) grafted onto quantum dots (QDs) CdS nanocrystals. In a typical run, the appropriate amounts of cadmium chloride (CdCl2) and sodium sulfide (Na2S) in the presence of 2-mercaptoethanol (ME) as the organic ligand are well dispersed in H2O/DMF solution without any aggregation. From a combination of transmission electron microscopy (TEM) and a computing method of Brus's model according to UV-vis absorption spectra, the particle size of as-prepared hydroxyl-coated CdS nanocrystals is about 5 nm. Then, PU-CdS transparent nanocomposites hybrids were synthesized by a two-step reaction. The effect of the different ratios of ME/Cd2+ and H2O/DMF on the resulting particle size of CdS nanocrystals was investigated by UV-vis absorption measurements. FT-IR and TGA characterizations indicate the formation of robust bonding between CdS nanocrystals and the organic ligand. The fluorescence measurement shows that CdS-PU hybrids exhibit good optical properties.     

Bacterial biosynthesis of cadmium sulfide nanocrystals

Semiconductor nanocrystals, which have unique optical and electronic properties, have potential for applications in the emerging field of nanoelectronics. To produce nanocrystals cheaply and efficiently, biological methods of synthesis are being explored. We found that E. coli, when incubated with cadmium chloride and sodium sulfide, have the capacity to synthesize intracellular cadmium sulfide (CdS) nanocrystals. The nanocrystals are composed of a wurtzite crystal phase with a size distribution of 2-5 nm. Nanocrystal biosynthesis increased about 20-fold in E. coli cells grown to stationary phase compared to late logarithmic phase. Our results highlight how different genetic and physiological parameters can enhance the formation of nanocrystals within bacterial cells.     

Large-scale synthesis of nearly monodisperse CdSe/CdS core/shell nanocrystals using air-stable reagents via successive ion layer adsorption and reaction

Successive ion layer adsorption and reaction (SILAR) originally developed for the deposition of thin films on solid substrates from solution baths is introduced as a technique for the growth of high-quality core/shell nanocrystals of compound semiconductors. The growth of the shell was designed to grow one monolayer at a time by alternating injections of air-stable and inexpensive cationic and anionic precursors into the reaction mixture with core nanocrystals. The principles of SILAR were demonstrated by the CdSe/CdS core/shell model system using its shell-thickness-dependent optical spectra as the probes with CdO and elemental S as the precursors. For this reaction system, a relatively high temperature, about 220-240 degrees C, was found to be essential for SILAR to fully occur. The synthesis can be readily performed on a multigram scale. The size distribution of the core/shell nanocrystals was maintained even after five monolayers of CdS shell (equivalent to about 10 times volume increase for a 3.5 nm CdSe nanocrystal) were grown onto the core nanocrystals. The epitaxial growth of the core/shell structures was verified by optical spectroscopy, TEM, XRD, and XPS. The photoluminescence quantum yield (PL QY) of the as-prepared CdSe/CdS core/shell nanocrystals ranged from 20% to 40%, and the PL full-width at half-maximum (fwhm) was maintained between 23 and 26 nm, even for those nanocrystals for which the UV-vis and PL peaks red-shifted by about 50 nm from that of the core nanocrystals. Several types of brightening phenomena were observed, some of which can further boost the PL QY of the core/shell nanocrystals. The CdSe/CdS core/shell nanocrystals were found to be superior in comparison to the highly luminescent CdSe plain core nanocrystals. The SILAR technique reported here can also be used for the growth of complex colloidal semiconductor nanostructures, such as quantum shells and colloidal quantum wells.     

Synthesis and Characterization of CdSe Nanocrystals Capped by CdS

CdSe semiconductor nanocrystals capped by CdS were synthesized in the aqueous solution with 2-mercaptoethanol as the stabilizer. The CdS capping with a higher band-gap than that of the core crystallite has successfully eliminated the surface traps. Optical absorption and fluorescence emission spectra were used to probe the effect of CdS passivation on the electronic structure of the nanocrystals. The composite CdSe/CdS nanocrystals exhibit strong, narrow(FWHM≤40 nm) and stable band-edge photoluminescence. X-ray powder diffraction, transmission electron microscopy and X-ray photoelectron spectroscopy were used to analyze the composite nanocrystals and determine their average size, size distribution, shape, internal structure and elemental composition.     

CuInS2/CdS基掺杂纳米晶的晶体结构、光谱性质及性能调控研究

多功能纳米晶的制备、性能及其应用是材料、化学、能源、生物医学等领域十分关注的课题之一。基于掺杂调控纳米晶生长和性能的思想,发展了纳米晶修饰和复合的概念和技术,使用绿色安全的化学溶液法结合外延生长技术合成了巯基丙酸(MPA)包覆的掺杂CuInS₂/CdS基纳米晶材料。通过适当调整掺杂异价离子的种类,实现了对CuInS₂/CdS基纳米晶显微结构和性能的调控,获得了具有特定相结构、组分、尺度和光学性能(吸收性质、光学带隙、发光强度)的纳米晶。存在于基质晶体中不同金属掺杂离子,会造成半导体的禁带中间产生掺杂能级,导致二次跃迁,进而产物体现出不同的禁带宽度。掺杂Co ²⁺、Fe ²⁺、Er ³⁺离子的CuInS₂/CdS纳米晶光致发光(PL)峰强度降低明显,这是由于Co ²⁺、Fe ²⁺、Er ³⁺离子掺杂有效地抑制了空穴-电子对的复合,降低了纳米晶的光生电子-空穴复合几率,使得其光催化活性得到增强。这些半导体纳米材料在光催化、能量转换与储存方面具有良好的应用潜力。     

CdS/SiO2纳米棒核/壳结构的制备和发光性能

利用在醇介质中氨水催化水解硅酸乙酯（TEOS）制备SiO2来包覆半导体CdS纳米棒而形成CdS/SiO2核/壳结构.通过X射线衍射（XRD）、透射电子显微镜（TEM）证实SiO2包覆壳层为非晶，且壳层厚度随TEOS浓度的增大而增加，在10～30 nm之间.并研究了其紫外 可见吸收光谱（UV Vis）和荧光发射光谱(PL)的性质.     

Highly luminescent, stable, and water-soluble CdSe/CdS core-shell dendron nanocrystals with carboxylate anchoring groups

A dendron ligand with two carboxylate anchoring groups at its focal point and eight hydroxyl groups as its terminal groups was found to efficiently convert as-synthesized CdSe/CdS core-shell nanocrystals in toluene to water-soluble dendron-ligand stabilized nanocrystals (dendron nanocrystals). The resulting dendron nanocrystals retained 60% of the photoluminescence value of the original CdSe/CdS core-shell nanocrystals in toluene and were significantly brighter than the similar dendron nanocrystals with thiolate (deprotonated thiol group) as the anchoring group which retained just 10% of the photoluminescence value of the original CdSe/CdS core-shell nanocrystals in toluene. The carboxylate-based dendron nanocrystals survived UV irradiation in air for at least 13 days, about 9 times better than the thiolate-based dendron nanocrystals (35 h) and similar to that of the thiolate-based dendron-box stabilized CdSe/CdS core-shell nanocrystals (box nanocrystals). Upon UV irradiation, the dendron nanocrystals became even 2 times brighter than the original CdSe/CdS core-shell nanocrystals in toluene, and the UV-brightened PL can retain the brightness for at least several months. These stable and bright dendron nanocrystals were soluble in various aqueous media, including all common biological buffer solutions tested, for at least 1.5 years. In addition to their superior performance, the synthetic chemistry of carboxylate dendron ligands and the corresponding dendron nanocrystals is relatively simple and with high yield.     

The influence of oxygen on the fluorescence enhancement of fatty-acid-capped CdS nanocrystals

CdS nanocrystals were synthesized in 1-octadecene (ODE) solution with oleic acid (OA) as a capping agent. Freshly prepared CdS nanocrystals showed a weak orangelike fluorescence due to defects on the particle surface. After several weeks' storage, the bulk fluorescence of CdS nanocrystals was dramatically enhanced, which gave the nanocrystals a blue or violet appearance. UV and photoluminescence (PL) measurements were employed to investigate this process. It has been found that the oxygen in the air played the most important role. The oxygen atoms could absorb on the surface of particles and a layer of oxide was gradually formed, which effectively passivated the surface of CdS nanocrystals. Interestingly, this oxidative process had no relation to UV illumination.     

Cauliflower-like CdS microspheres composed of nanocrystals and their physicochemical properties

Cauliflower-like cadmium sulfide (CdS) microspheres composed of nanocrystals have been successfully synthesized by a hydrothermal method using poly(ethylene glycol) (PEG) as the template coordination agent and characterized by a variety of methods. Our experiments confirmed that the size of the CdS microspheres could be easily modified by controlling the chain length of PEG. Powder X-ray diffraction and Raman spectroscopy measurements revealed the cubic structure of the CdS microspheres; morphological studies performed by HR-SEM and HR-TEM methods showed the cauliflower-like structure of the synthesized CdS microspheres. Each microsphere was identified to be created by the self-assembly of CdS nanocrystals and is attributed to the oriented aggregation of the CdS nanocrystals around a polymer-Cd(2+) complex spherical framework structure. X-ray photoelectron spectroscopy (XPS) and energy-dispersive X-ray (EDX) analysis confirmed the stoichiometries of the CdS microspheres. Diffuse reflectance spectrum (DRS) measurements showed that increasing the PEG chain length increased the band gap value of the CdS microspheres slightly, from 1.99 to 2.06 eV. The cauliflower-like CdS microspheres could be applied to photocatalytic degradation studies.     

Polyacrylic acid coating of highly luminescent CdS nanocrystals for biological labeling applications

Surface coating of highly luminescent CdS nanocrystals by polyacrylic acid was demonstrated. The method proceeded in 2 steps, (i) modification of the CdS surface by alkyl molecules and (ii) polyacrylic acid coating of the surface modified CdS. Attachment of alkyl ammonium on the CdS surface induced a phase transfer reaction from an aqueous to a non-polar phase with a yield of approximately 100%. Investigating alkyl molecules with various functional groups revealed that the alkyl molecules, possessing the cation moiety, such as amine or ammonium salt, can electrostatically interact with the CdS surface. The PL of the uncoated nanocrystals was almost entirely quenched in the pH range of approximately 7, while the polyacrylic acid coated nanocrystals exhibited moderate PL intensity. This PL intensity was preserved for at least several days, facilitating biological labeling application under a neutral condition.     

CdS纳米晶与多肽分子相互作用研究

研究了半导体CdS纳米晶的表面功能化及荧光光谱特性, 并利用静电/配位自组装方法实现了多肽和CdS纳米晶的生物无机偶联, 研究了纳米晶多肽偶联体系的荧光光谱以及多肽与CdS纳米晶之间的相互作用. 结果表明: 含巯基多肽对CdS纳米晶表面形成完善包覆, 消除CdS纳米晶表面缺陷, 使CdS纳米晶荧光增强; 含端氨基多肽使CdS纳米晶荧光出现先升后降趋势; 其余不含巯基和氨基的多肽均猝灭CdS纳米晶荧光, 猝灭机制属于形成化合物所引起的静态猝灭, 它们的结合常数约为2×10⁴, 结合位点数约为0.87～1.00.     

Generalized and facile synthesis of semiconducting metal sulfide nanocrystals

We report on the synthesis of semiconductor nanocrystals of PbS, ZnS, CdS, and MnS through a facile and inexpensive synthetic process. Metal-oleylamine complexes, which were obtained from the reaction of metal chloride and oleylamine, were mixed with sulfur. The reaction mixture was heated under appropriate experimental conditions to produce metal sulfide nanocrystals. Uniform cube-shaped PbS nanocrystals with particle sizes of 6, 8, 9, and 13 nm were synthesized. The particle size was controlled by changing the relative amount of PbCl(2) and sulfur. Uniform 11 nm sized spherical ZnS nanocrystals were synthesized from the reaction of zinc chloride and sulfur, followed by one cycle of size-selective precipitation. CdS nanocrystals that consist of rods, bipods, and tripods were synthesized from a reaction mixture containing a 1:6 molar ratio of cadmium to sulfur. Spherical CdS nanocrystals (5.1 nm sized) were obtained from a reaction mixture with a cadmium to sulfur molar ratio of 2:1. MnS nanocrystals with various sizes and shapes were synthesized from the reaction of MnCl(2) and sulfur in oleylamine. Rod-shaped MnS nanocrystals with an average size of 20 nm (thickness) x 37 nm (length) were synthesized from a 1:1 molar ratio of MnCl(2) and sulfur at 240 degrees C. Novel bullet-shaped MnS nanocrystals with an average size of 17 nm (thickness) x 44 nm (length) were synthesized from the reaction of 4 mmol of MnCl(2) and 2 mmol of sulfur at 280 degrees C for 2 h. Shorter bullet-shaped MnS nanocrystals were synthesized from a 3:1 molar ratio of MnCl(2) and sulfur. Hexagon-shaped MnS nanocrystals were also obtained. All of the synthesized nanocrystals were highly crystalline.     

有机硫源溶剂热法合成CdS纳米晶体

以二硫化四甲基秋兰姆((TMTD)作为有机硫源,分别在苯、水-苯溶剂中于不同温度、不同时间溶剂热法合成了CdS纳米晶体。采用FE-SEM、XRD和FTIR对晶体的结构和成形机理进行了研究。结果表明,溶剂热温度比反应时间对晶体形貌的形成影响更大。CdS纳米晶体是立方与六角的混合晶型。此外,溶剂的种类也是影响CdS纳米晶体结构和成形的重要因素,并且对花形CdS纳米晶体进行了阴极发光(CL)光谱的研究。     

水热合成CdS纳米晶体的形貌控制研究

研究了水热合成CdS纳米晶体形貌的化学控制，选择不同的络合试剂为模板,研究其对水热合成CdS纳米晶体形貌的影响.实验发现若以络合试剂乙二胺、甲胺为模板时，产品CdS晶体的形貌分别为（20～30） nm×（200～600） nm和（40～50） nm×（200～600） nm尺寸的纳米棒;而以络合试剂吡啶、 氨为模板时，产品CdS晶体的形貌分别为平均尺寸约30 nm和20 nm的纳米颗粒.用XRD、TEM、XPS、PL和Raman光谱等技术对所得CdS纳米棒进行了表征.同时对水热合成CdS纳米晶体形貌的模板控制机制进行了探讨，提出了一种水热合成CdS纳米棒的络合物结构诱导生长机理.