Permeability of rat and rabbit erythrocyte membranes for a series of amides

Permeability coefficients of rat and rabbit erythrocyte membranes for a series of amides, as well as for erythrocytes treated with p-chloromercuribenzenesulfonic acid monosodium salt (pCMBS) have been determined at 25 and 37 degrees C. Directly proportional dependence of the pCMBS treated erythrocyte permeability for investigated substances and their partition coefficients between the hydrophobic phase and water as well as the values of activation energy of this process indicate that penetration of small hydrophilic molecules is realized by passive diffusion through the lipid bilayer. The results obtained indicate that penetration of small hydrophilic molecules of formamide through lipids is determined by the existence of a free space between hydrocarbon chains that arises from kink formation. The differences in permeability between rat and rabbit erythrocyte membranes could arise in particular as a result of the differences in lipid composition.     

Water-templated transmembrane nanopores from shape-persistent oligocholate macrocycles

Hydrophobic interactions normally are not considered a major driving force for self-assembling in a hydrophobic environment. When macrocyclic oligocholates were placed within lipid membranes, however, the macrocycles pulled water molecules from the aqueous phase into their hydrophilic internal cavities. These water molecules had strong tendencies to aggregate in a hydrophobic environment and templated the macrocycles to self-assemble into transmembrane nanopores. This counterintuitive hydrophobic effect resulted in some highly unusual transport behavior. Cholesterol normally increases the hydrophobicity of lipid membranes and makes them less permeable to hydrophilic molecules. The permeability of glucose across the oligocholate-containing membranes, however, increased significantly upon the inclusion of cholesterol. Large hydrophilic molecules tend to have difficulty traversing a hydrophobic barrier. The cyclic cholate tetramer, however, was more effective at permeating maltotriose than glucose.     

Nafion膜表面亲水性研究

Ｎａｆｉｏｎ膜在电化学体系中的应用越来越广泛,而其表面亲水性往往直接影响着使用性能．本文介绍一种适宜于表征Ｎａｆｉｏｎ膜表面亲水性的接触角测量方法,即束缚气泡法,并讨论了该膜与水溶液接触角的滞后现象、溶液表面张力的影响,简介了用全氟表面活性剂改善Ｎａｆｉｏｎ膜表面亲水性的尝试．     

Prediction of skin permeability of drugs. I. Comparison with artificial membrane

In order to measure the contribution of lipid and pore (aqueous) pathways to the total skin permeation of drugs, and to establish a predictive method for the steady state permeation rate of drugs, the relationship between permeability through excised hairless rat skin and some physicochemical properties of several drugs were compared with those through polydimethylsiloxane (silicone) and poly(2-hydroxyethyl methacrylate) (pHEMA) membranes, as typical solution-diffusion and porous membranes, respectively. A linear relationship was found between the permeability coefficients of drugs for the silicone membrane and their octanol/water partition coefficients. For the pHEMA membrane, the permeability coefficients were almost constant independent of the partition coefficient. On the other hand, the skin permeation properties could be classified into two types: one involves the case of lipophilic drugs, where the permeability coefficient is correlated to the partition coefficient, similar to the silicone membrane; and the other involves hydrophilic drugs, where the permeability coefficients were almost constant, similar to pHEMA membrane. From the above results, the stratum corneum, the main barrier in skin, could be described as a membrane having two parallel permeation pathways: lipid and pore pathways. An equation for predicting the steady state permeation rate of drugs was derived based on this skin permeation model.     

Thermally cleavable surfactants based on furan-maleimide Diels-Alder adducts

Two new surfactant molecules are reported that contain thermally labile Diels-Alder adducts connecting the hydrophilic and hydrophobic sections of each molecule. The two surfactants possess identical hydrophobic dodecyl tail segments but have phenol and carboxylic acid hydrophilic headgroups, respectively. Deprotonation with potassium hydroxide affords the formation of water-soluble surfactants. Room temperature aqueous solutions of both surfactants exhibit classical surface-active agent behavior similar to common analagous alkylaryl surfactant molecules. Critical micelle concentrations have been determined for each surfactant through dynamic surface tension and dye solubilization techniques. Small-angle neutron scattering measurements of the aqueous surfactant solutions indicate the presence of spherical micelles with radii of 16.5 angstroms for the carboxylate and 18.8 angstroms for the phenolate. When these surfactants are exposed to elevated temperatures (>50 degrees C), the retro Diels-Alder reaction occurs, yielding hydrophilic and hydrophobic fragments. Aqueous solutions of each surfactant subsequently exhibit a loss of all surface-active behavior and the micellar aggregates are no longer detectable.     

Spreading of proteins and its effect on adsorption and desorption kinetics

The kinetics of adsorption of lysozyme and alpha-lactalbumin from aqueous solution on silica and hydrophobized silica has been studied. The initial rate of adsorption of lysozyme at the hydrophilic surface is comparable with the limiting flux. For lysozyme at the hydrophobic surface and alpha-lactalbumin on both surfaces, the rate of adsorption is lower than the limiting flux, but the adsorption proceeds cooperatively, as manifested by an increase in the adsorption rate after the first protein molecules are adsorbed. At the hydrophilic surface, adsorption saturation (reflected in a steady-state value of the adsorbed amount) of both proteins strongly depends on the rate of adsorption, but for the hydrophobic surface no such dependency is observed. It points to structural relaxation ("spreading") of the adsorbed protein molecules, which occurs at the hydrophobic surface faster than at the hydrophilic one. For lysozyme, desorption has been studied as well. It is found that the desorbable fraction decreases after longer residence time of the protein at the interface.     

A core-shell nanoparticle approach to photoreversible fluorescence modulation of a hydrophobic dye in aqueous media

Amphiphilic core-shell nanoparticles containing spiropyran moieties have been prepared in aqueous media. The nanoparticles consist of hydrophilic and biocompatible poly(ethyleneimine) (PEI) chain segments, which serve as the shell, and a hydrophobic copolymer of methyl methacrylate (MMA), a spiropyran-linked methacrylate, and a cross-linker, which forms the core of the nanoparticles. A hydrophobic fluorescent dye based on the nitrobenzoxadiazolyl (NBD) group was introduced into the nanoparticles to form NBD-nanoparticle complexes in water. The nanoparticles not only greatly enhance the fluorescence emission of the hydrophobic dye NBD in aqueous media, probably by accommodating the dye molecules in the interface between the hydrophilic shells and the hydrophobic cores, but also modulate the fluorescence of the dye through intraparticle energy transfer. This biocompatible and photoresponsive nanoparticle complex may find applications in biological areas such as biological diagnosis, imaging, and detection. In addition, this nanoparticle approach will open up possibilities for the fluorescence modulation of other hydrophobic fluorophores in aqueous media.     

Bridging across length scales: multi-scale ordering of supported lipid bilayers via lipoprotein self-assembly and surface patterning

We show that a two-step process, involving spontaneous self-assembly of lipids and apolipoproteins and surface patterning, produces single, supported lipid bilayers over two discrete and independently adjustable length scales. Specifically, an aqueous phase incubation of DMPC vesicles with purified apolipoprotein A-I results in the reconstitution of high density lipoprotein (rHDL), wherein nanoscale clusters of single lipid bilayers are corralled by the protein. Adsorption of these discoidal particles to clean hydrophilic glass (or silicon) followed by direct exposure to a spatial pattern of short-wavelength UV radiation directly produces microscopic patterns of nanostructured bilayers. Alternatively, simple incubation of aqueous phase rHDL with a chemically patterned hydrophilic/hydrophobic surface produces a novel compositional pattern, caused by an increased affinity for adsorption onto hydrophilic regions relative to the surrounding hydrophobic regions. Further, by simple chemical denaturation of the boundary protein, nanoscale compartmentalization can be selectively erased, thus producing patterns of laterally fluid, lipid bilayers structured solely at the mesoscopic length scale. Since these aqueous phase microarrays of nanostructured lipid bilayers allow for membrane proteins to be embedded within single nanoscale bilayer compartments, they present a viable means of generating high-density membrane protein arrays. Such a system would permit in-depth elucidation of membrane protein structure-function relationships and the consequences of membrane compartmentalization on lipid dynamics.     

Novel Xylene‐Linked Maltoside Amphiphiles (XMAs) for Membrane Protein Stabilisation

Membrane proteins are key functional players in biological systems. These biomacromolecules contain both hydrophilic and hydrophobic regions and thus amphipathic molecules are necessary to extract membrane proteins from their native lipid environments and stabilise them in aqueous solutions. Conventional detergents are commonly used for membrane protein manipulation, but membrane proteins surrounded by these agents often undergo denaturation and aggregation. In this study, a novel class of maltoside‐bearing amphiphiles, with a xylene linker in the central region, designated xylene‐linked maltoside amphiphiles (XMAs) was developed. When these novel agents were evaluated with a number of membrane proteins, it was found that XMA‐4 and XMA‐5 have particularly favourable efficacy with respect to membrane protein stabilisation, indicating that these agents hold significant potential for membrane protein structural study.     

Performance of solvent-resistant membranes for non-aqueous systems: solvent permeation results and modeling

Membrane processes like reverse osmosis (RO) and nanofiltration (NF) can be low energy consuming operations as compared to the traditional chemical engineering unit operations and have been widely used for aqueous systems. Since such membrane processes are low energy consuming operations, their use in non-aqueous systems would offer considerable energy savings. Thus, the study is directed towards development and experimental verification of membrane materials and transport models to explain permeation properties of non-aqueous solvent systems. The understanding of polymer–solvent interactions is critical towards the development of suitable materials and also the prediction of the transport mechanisms.Pure solvent permeation studies were conducted to understand the mechanism of solvent transport through polymeric membranes. Different membrane materials (hydrophilic and hydrophobic) as well as different solvents (polar and non-polar) were used for the study. Pure solvent fluxes for hydrophilic membranes used showed that polar solvents (methanol, ethanol, iso-propanol) had a significantly higher flux (8–10 times) than that of the non-polar solvents (pentane, hexane, octane). On the contrary, the non-polar solvent flux was two to four times that of the polar solvents for hydrophobic membranes. For example, hexane flux at ∼13 bar through a hydrophobic silicone based NF membrane was ∼0.6×10⁻⁴ cm³/cm² s. And that through a hydrophilic aromatic polyamide based NF membrane was ∼6×10⁻⁴ cm³/cm² s. A simple model based on a solution-diffusion approach is proposed for predicting the pure solvent permeation through hydrophobic polymeric membranes. The model uses molar volume and viscosity of the solvent as parameters for predicting the pure solvent permeability. The model reasonably predicts the pure solvent permeation (R²=0.89, S.E.∼4%) for hydrophobic membranes. The model has also been experimentally verified using high solution temperatures and also literature experimental data. To extend the predictions to different membranes (hydrophilic and hydrophobic), surface energy and sorption values have been used as a parameter along with the solvent physical properties.     

亲水膜的表面改性及在膜蒸馏中的应用

膜的微孔性和疏水性是水溶液膜蒸馏的两个基本条件,迄今人们均采用疏水性高分子材料制成疏水微孔膜用于膜蒸馏研究。本文采用辐照接枝聚合和等离子体表面聚合的方法,将亲水的醋酸纤维素微孔膜和硝酸纤维素微孔膜表面疏水化改性,成功地用于膜蒸馏研究,大大扩展了疏水微孔膜的材料来源。实验结果表明,亲水膜表面改性得到的疏水膜,其膜蒸馏性能不低于疏水材料制成的膜,尤其是等离子体聚合法可以实现多种特殊单体在多孔的材料表面聚合,成为制备高性能疏水微孔膜的有效手段,为膜蒸馏的深入发展和实用化创造了有利条件。     

Fluorophore and dye-assisted dispersion of carbon nanotubes in aqueous solution

DNA short oligo, surfactant, peptides, and polymer-assisted dispersion of single-walled carbon nanotube (SWCNTs) in aqueous solution have been intensively studied. It has been suggested that van der Waals interaction, π-π stacking, and hydrophobic interaction are major factors that account for the SWCNTs dispersion. Fluorophore and dye molecules such as Rhodamine B and fluorescein have both hydrophilic and hydrophobic moieties. These molecules also contain π-conjugated systems that can potentially interact with SWCNTs to induce its dispersion. Through a systematic study, here we show that SWCNTs can be dispersed in aqueous solution in the presence of various fluorophore or dye molecules. However, the ability of a fluorophore or dye molecule to disperse SWCNTs is not correlated with the stability of the fluorophore/dye-SWCNT complex, suggesting that the on-rate of fluorophore/dye binding to SWCNTs may dominate the efficiency of this process. We also examined the uptake of fluorophore molecules by mammalian cells when these molecules formed complexes with SWCNTs. The results can have potential applications in the delivery of poor cell-penetrating fluorophore molecules.     

Solvent-extraction and Langmuir-adsorption-based transport in chemically functionalized nanopore membranes

We have investigated the transport properties of nanopore alumina membranes that were rendered hydrophobic by functionalization with octadecyltrimethoxysilane (ODS). The pores in these ODS-modified membranes are so hydrophobic that they are not wetted by water. Nevertheless, nonionic molecules can be transported from an aqueous feed solution on one side of the membrane, through the dry nanopores, and into an aqueous receiver solution on the other side. The transport mechanism involves Langmuir-type adsorption of the permeating molecule onto the ODS layers lining the pore walls, followed by solid-state diffusion along these ODS layers; we have measured the diffusion coefficients associated with this transport process. We have also investigated the transport properties of membranes prepared by filling the ODS-modified pores with the water-immiscible (hydrophobic) liquid mineral oil. In this case the transport mechanism involves solvent extraction of the permeating molecule into the mineral oil subphase confined with the pores, followed by solution-based diffusion through this liquid subphase. Because of this different transport mechanism, the supported-liquid membranes show substantially better transport selectivity than the ODS-modified membranes that contain no liquid subphase.     

Multicompartmental Microcapsules with Orthogonal Programmable Two‐Way Sequencing of Hydrophobic and Hydrophilic Cargo Release

Multicompartmental responsive microstructures with the capability for the pre‐programmed sequential release of multiple target molecules of opposite solubility (hydrophobic and hydrophilic) in a controlled manner have been fabricated. Star block copolymers with dual‐responsive blocks (temperature for poly(N‐isopropylacrylamide) chains and pH for poly(acrylic acid) and poly(2‐vinylpyridine) arms) and unimolecular micellar structures serve as nanocarriers for hydrophobic molecules in the microcapsule shell. The interior of the microcapsule can be loaded with water‐soluble hydrophilic macromolecules. For these dual‐loaded microcapsules, a programmable and sequential release of hydrophobic and hydrophilic molecules from the shell and core, respectively, can be triggered independently by temperature and pH variations. These stimuli affect the hydrophobicity and chain conformation of the star block copolymers to initiate out‐of‐shell release (elevated temperature), or change the overall star conformation and interlayer interactions to trigger increased permeability of the shell and out‐of‐core release (pH). Reversing stimulus order completely alters the release process.     

Permeability of ionized salicylate derivatives through guinea pig dorsal skin

pH-dependency of skin permeability to salicylic acid was examined in excised guinea pig dorsal skin. Permeation followed the pH-partition theory at acidic pH. However, above pH 5.0 the observed permeability coefficients were larger than the estimated values obtained from the ratio of the undissociated forms. These findings are quite different from those obtained using the same drug and a silicone rubber membrane, in which permeability coefficients were consistent with the pH-partition theory. The findings suggested that permeation of salicylate as anions occurred at a neutral skin pH. The permeability coefficient of the ionized form was estimated to be about 1.6% of the nonionized form. We also examined the skin permeability of salicylate and its five 5-substituents and two 3-substituents at pH 7.4. We investigated the relationship between their permeability coefficients and the physico-chemical properties of the substituents. Multi regression analysis on the permeability coefficients showed a parabolic relationship between the values of the hydrophobic parameter (pi) and the logarithms of the permeability coefficients. These findings suggested that the ionic permeation pathway of salicylate derivatives is controlled by hydrophobic as well as hydrophilic properties.     

Novel combination of hydrophilic/hydrophobic surface for large wettability difference and its application to liquid manipulation

This paper reports a novel combination of hydrophilic/hydrophobic materials for the evolution of liquid manipulation. Droplet generation based on a hydrophilic/hydrophobic mechanism is a promising method for highly accurate liquid manipulations. Although several droplet manipulation devices utilizing hydrophilic/hydrophobic patterns have been reported, it has been difficult to split fluid into droplets solely through hydrophilic/hydrophobic patterns in a microchannel. In this study, a material combination for fabricating hydrophilic/hydrophobic patterns was investigated and their wettability difference was enhanced for droplet generation. To improve hydrophilicity, we attempted to increase the surface area of silicon oxide through pulsed plasma chemical vapor deposition (PPCVD). To improve hydrophobicity, the damage to the hydrophobic patterns in the fabrication process was reduced. We successfully enhanced the difference in contact angles from 54.3° to 86.6° by combining the developed hydrophilic material and hydrophobic material. The developed material combination could successfully split fluid into a quantitative droplet of 14.1 nL in a microfluidic chip. Because the developed hydrophilic/hydrophobic combination enables the formation of a droplet with desirable shape in microchannels, the developed hydrophilic/hydrophobic combination is a promising component for lab-on-a-chip applications.     

Thermodynamic study of the effect of ethanol on two amphiphilic penicillins

The effect of ethanol on the thermodynamic properties on two anionic amphiphilic penicillins, cloxacillin and dicloxacillin, has been investigated. Cloxacillin and dicloxacillin are two molecules that are similar structurally, differing only by an additional chlorine atom on the phenyl ring of dicloxacillin. The penicillins can be considered as hydrotropes if we considered that the term comprises hydrophilic and hydrophobic moieties that form aggregates by a stacking mechanism as is the case of both penicillins. By means of ultrasound velocities and densities, we have calculated the apparent molar volumes and adiabatic compressibilities. The critical concentrations, cc, and partition coefficients, K, have been determined, the latter using an indirect method based on the pseudophase model with the help of apparent molar data. This method has the advantage of allowing one to calculate the distribution coefficients at concentrations of the solubilizate below the saturation. The standard molar energy of Gibbs change, DeltaG0, on transfer from the aqueous to the micelar phase was calculated from the partition coefficient. The effect of the alcohol involves a slight decrease of the critical concentration because of a headgroup repulsion decrease. The enthalpies of dilution of dicloxacillin in a mixture of water and 15% w/v of ethanol were calculated. The aggregation process is more exothermic in ethanol that in pure water.     

A molecular-dynamics study of lipid bilayers: effects of the hydrocarbon chain length on permeability

In this paper, we investigate the effects of the hydrocarbon chain length of lipid molecules on the permeation process of small molecules through lipid bilayers. We perform molecular-dynamics simulations using three kinds of lipid molecules with different chain length: dilauroylphosphatidylcholine, dimyristoylphosphatidylcholine, and dipalmiltoylphosphatidylcholine. Free-energy profiles of O2, CO, NO, and water molecules are calculated by means of the cavity insertion Widom method and the probability ratio method. We show that the lipid membrane with longer chains has a larger and wider energy barrier. The local diffusion coefficients of water across the bilayers are also calculated by the force autocorrelation function method and the velocity autocorrelation function method. The local diffusion coefficients in the bilayers are not altered significantly by the chain length. We estimate the permeability coefficients of water across the three membranes according to the solubility-diffusion model; we find that the water permeability decreases modestly with increasing chain length of the lipid molecules.     

Synthesis and dilute aqueous solution properties of ester functionalized cationic gemini surfactants having different ethylene oxide units as spacer

New series of ester functionalized quaternary ammonium gemini surfactants having different ethylene oxide units as spacer have been synthesized and investigated for their aggregation behavior and thermodynamic properties of micellization by surface tension, conductivity, and fluorescence methods. The critical micelle concentration (cmc) of these gemini surfactants increases with the increase in the length of polar hydrophilic ethylene oxide spacer. The micellization process has been found to be entropy-driven and dependent on both the tendency of the hydrophobic group of the surfactants to transfer from aqueous environment to interior of micelle as well as the rearrangement of flexible ester-linked ethylene oxide units (hydrophilic spacer) into aqueous phase. The polar ester functional groups and pairs of nonbonding electrons on oxygen atom of ethylene oxide spacer form hydrogen bonding with water molecules enhancing their solubility in aqueous system.