Extremely Low Vapor-Pressure Data as Access to PC-SAFT Parameter Estimation for Ionic Liquids and Modeling of Precursor Solubility in Ionic Liquids

Precursor solubility is a crucial factor in industrial applications, dominating the outcome of reactions and purification steps. The outcome and success of thermodynamic modelling of this industrially important property with equations of states, such as Perturbed-Chain Statistical Associating Fluid Theory (PC-SAFT), vastly depends on the quality of the pure-component parameters. The pure-component parameters for low-volatile compounds such as ionic liquids (ILs) have been commonly estimated using mixture properties, e. g. the osmotic pressure of aqueous solutions. This leads to parameters that depend on the solvent, and transferability to other mixtures often causes poor modeling results. Mixture-independent experimental properties would be a more suitable basis for the parameter estimation offering a way to universal parameter sets. Model parameters for ILs are available in the literature [10.1016/j.fluid.2012.05.029], but they were estimated using pure-IL density data. The present work focuses on a step towards a more universal estimation strategy that includes new experimental vapor-pressure data of the pure IL. ILs exhibit an almost negligible vapor pressure in magnitude of usually 10⁻⁵ Pa even at elevated temperatures. In this work, such vapor-pressure data of a series of 1-ethyl-3-methyl-imidazolium-based [C₂mim]-ILs with various IL-anions (e. g. tetrafluoroborate [BF₄]⁻, hexafluorophosphate [PF₆]⁻, bis(trifluoromethylsulfonyl)imide [NTf₂]⁻) were experimentally determined and subsequently used for PC-SAFT parameter estimation. The so-determined parameters were used to predict experimental molecular precursor solubility in ILs and infinitely diluted activity coefficients of various solvents in ILs. The parameters were further compared to modeling results using classical parametrization methods (use of liquid-density data only for the molecular PC-SAFT and the ion-based electrolyte PC-SAFT). As a result, the modeled precursor solubilities using the new approach are much more precise than using the classical parametrization methods, and required binary parameters were found to be much smaller (if needed). In sum, including the pure-component vapor-pressure data of ILs opens the door towards parameter estimation that is not biased by mixture data. This procedure might be suitable also for polymers and for all kind of ionic species but needs extension to ion-specific parametrization in the long term.     

Nanostructuration Effect on the Thermal Behavior of Ionic Liquids

This work shows how the nanostructuration of ionic liquids (ILs) governs the glass and melting transitions of the bistriflimide imidazolium‐based [C_nC₁im][NTf₂] and [C_nC_nim][NTf₂] series, which highlights the trend shift that occurs at the critical alkyl size (CAS) of n=6. An initial increase in the glass temperature (T_g) with an increase in the alkyl side chain was observed due to the intensification of the dispersive interactions (van der Waals). Above the CAS, the ?CH₂? increment has the same effect in both glass and liquid states, which leads to a plateau in the glass transition after nanostructuration. The melting temperature (T_m) of the [C_nC₁im][NTf₂] and [C_nC_nim][NTf₂] series presents a V‐shaped profile. For the short‐alkyl ILs, the ?CH₂? increment affects the electrostatic ion pair interactions, which leads to an increase in the conformational entropy. The ?CH₂? increment disturbs the packing ability of the ILs and leads to a higher entropy value ( ) and consequently a decrease in T_m. Above the CAS, the ?CH₂? contribution to the melting temperature becomes more regular, as a consequence of the nanostructuration of the IL into polar and nonpolar domains. The dependence of the alkyl chain on the temperature, enthalpy, and entropy of melting in the ILs above the CAS is very similar to the one observed for the alkane series, which highlights the importance of the nonpolar alkyl domains on the ILs thermal behavior.     

Chiral Pyrrolidinium Ionic Liquids with (−)-Borneol Fragment in the Cation – Synthesis,Physicochemical Properties and Application in Diels-Alder Reaction

A series of chiral pyrrolidinium salts containing (1 S)-endo-(−)-born-2-yloxymethyl substituent in the structure of the cation and six different anions: chloride, tetrafluoroborate [BF₄]⁻, hexafluorophosphate [PF₆]⁻, trifluoromethanesulfonate [OTf]⁻, bis(trifluoromethylsulfonyl)imide [NTf₂]⁻, bis(pentafluoroethylsulfonyl)imide [NPf₂]⁻ and perfluorobutanesulfonate [C₄FS]⁻ were efficiently prepared and extensively characterized. The enantiomeric purity of them was confirmed by NMR analysis with a chemical shift reagent. All salts were characterized with the specific rotation, the solubility in commonly used solvents, thermal properties, including phase transition temperatures and thermal stability. Salts with [PF₆]⁻, [C₄FS]⁻, [NTf₂]⁻ and [NPf₂]⁻ anions were classified as chiral ionic liquids (CILs). Moreover, salts with [NTf₂]⁻ and [NPf₂]⁻ anions were in the liquid state at room temperature and below. Therefore, density and dynamic viscosity, the surface tension and the contact angle on three different surfaces were also measured for them. Additionally, these chiral ionic liquids were tested as solvents in Diels-Alder reaction.     

PVT properties of imidazolium-, phosphonium-, pyridinium- and pyrrolidinium-based ionic liquids using critical point constants

Song and Mason equation of state (EOS) with a simple modification has been extended to modelling PVT properties of ionic liquids (ILs). The considered ILs are [C₁mim][MeSO4], [C₁mim][CH₃OC₂H₅SO₄], [C₁mim][(CH₃)₂PO₄], [C₂mim][MeSO4], [C₂mim][BF₄], [C₂mim][SCN], [C₂eim][NTf₂], [C₄mim][C(CN)₃], [C₄mim][CF₃SO₃], [C₄mim][SCN], [C₅mim][NTf₂], [C₈mim][NTf₂], [(C₆H₁₃)₃P(C₁₄H₂₉)][Cl], [(C₆H₁₃)₃P(C₁₄H₂₉)][NTf₂], [(C₆H₁₃)₃P(C₁₄H₂₉)][Ac], [C₃mpyr][NTf₂], [C₄mpyr][NTf₂] and [Py][C₂H₅OC₂H₄SO₄]. Three temperature-dependent parameters in the proposed EOS have been scaled as functions of reduced temperature with the use of the law of corresponding states. It is shown that the knowledge of just critical temperature and critical density is sufficient to predict the PVT properties of these ILs. The overall average absolute deviation of calculated densities from literature values for 1347 data points of 18 ILs was found to be 0.58%. The predicted density of ILs from proposed EOS has been compared with those obtained by other literature work. Moreover, we indicate that the Zeno line regularity can well be predicted by proposed model for ILs.     

Synthesis of crosslinked PEG/IL blend membrane via one-pot thiol–ene/epoxy chemistry

Poly(ethylene glycol) (PEG)-based membranes have obtained considerable attentions for CO₂ separation for their promising CO₂ separation performance and excellent thermal/chemical resistance. In this work, a one-pot thiol–ene/epoxy reaction was used to prepare crosslinked PEG-based and PEG/ionic liquids (ILs) blend membranes. Four ILs of the same cation [Bmim]⁺ with different anions ([BF₄]⁻, [PF₆]⁻, [NTf₂]⁻, and [TCM]⁻) were chosen as the additives. The chemical structure, thermal properties, hydrophilicity, and permeation performance of the resultant membranes were investigated to study the ILs' effects. An increment in CO₂ permeability (~34%) was obtained by optimizing monomer ratios and thus crosslinking network structures. Adding ILs into optimized PEG matrix shows distinct influences in CO₂ separation performance depending on the anions' types, due to the different CO₂ affinities and compatibilities with PEG matrix. Among these ILs, [Bmim][NTf₂] was found the most effective in enhancing CO₂ transport by simultaneously increasing the solubility and diffusivity of CO₂. © 2020 The Authors. Journal of Polymer Science published by Wiley Periodicals LLC. J. Polym. Sci. 2020 , 58, 2575-2585     

In the footsteps of August Michaelis: Syntheses and Thermodynamics of Extremely Low-Volatile Ionic Liquids

A series of nine different known ionic liquids or low melting salts was synthesised and purified. They are composed of the [NTf₂]^– (bis(trifluoromethane)sulfonimide), [OTf]^– (trifluoro-methane-sulfonate), or [B(CN)₄]^– (tetracyanidoborate) anion and [Ph₄P]⁺ (tetraphenylphosphonium), [Ph₃BzP]⁺ (triphenylbenzyl phosphonium), [ⁿBu₄P]⁺ (tetra-ⁿbutylphosphonium), [ⁿBuPh₃P]⁺ (tri-phenyl-ⁿbutylphosphonium), [ⁿBu₄N]⁺ (tetra-ⁿbutylammonium), or the [PPN]⁺ (bis(triphenylphosphine)iminium) cation. Precise vapour pressure data and enthalpies of vaporisation were measured using the Quartz Crystal Microbalance (QCM) method and evaluated. Structure-property relations are established using the obtained data as well as literature known data of ILs with alkyl-substituted imidazolium cations. It turns out that ILs with the tetracyanidoborate anion have even higher values of the enthalpy of vaporisation than those with the common [NTf₂]⁻ or [OTf]⁻ anion and therefore are even less volatile.     

Abrasive Stripping Voltammetric Studies of Lignin and Lignin Model Compounds

Lignin is potentially a major renewable, nonfossil source of aromatic and cyclohexyl compounds. In this study, we have investigated the abrasive stripping voltammetry of lignin and four lignin model compounds in the room temperature ionic liquids (RTILs) [C₄mim][NTf₂], [N_6,2,2,2][NTf₂] and [C₄mim][OTf] (where [C₄mim]⁺=1‐butyl‐3‐methylimidazolium, [N_6,2,2,2]⁺=n‐hexyltriethylammonium, [NTf₂]^?=bis(trifluoromethanesulfonyl)imide and [OTf]^? =trifluoromethanesulfonate) on a gold macrodisk and in 0.1 M H₂SO₄ and 0.1 M NaOH on a boron‐doped diamond (BDD) macroelectrode, with the hope of using the voltammetry to fingerprint the functional groups within the lignin molecule. The use of RTILs on metal electrodes, or either acidic or basic media in combination with BDD electrodes allows solvent systems with wide electrochemical potential windows, useful for studying voltammetry which may be difficult to observe in systems where early breakdown of the solvent occurs.     

Calorimetric Study on the Ion Pairing and Aggregation of 1-Ethyl-3-Methylimidazolium bis(trifluoromethylsulfonyl)amide ([C2mim][NTf2]) and Related Ionic Liquids in the Low-Dielectric Constant Solvent Chloroform

A calorimetric study of dissolution of the ionic liquids (ILs) 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide ([C₂mim][NTf₂]), 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide ([C₆mim][NTf₂]), and 1-hexyl-3-methylimidazolium tris(trifluoromethylsulfonyl)methide ([C₆mim][CTf₃]) into chloroform (CHCl₃) is presented with particular focus on [C₂mim][NTf₂]. The interpretation of the calorimetric data for [C₂mim][NTf₂] was aided by additional NMR self-diffusion measurements and viscosity measurements that through the Stokes–Einstein equation provided information about the average size of the species present. It is evident that the main equilibrium species are ion pairs and aggregates. An estimate for the enthalpy contribution from aggregate formation for [C₂mim][NTf₂] was found to be ?2.09 kJ per mol of added IL at 288.2 K and slightly decreasing in magnitude to ?1.11 kJ·mol^?1 at 318.2 K. While all three ILs release heat upon dissolution into CHCl₃, different temperature trends are observed demonstrating the fine balance of competing contributions from breaking IL interactions, cavity formation for the solutes to reside in, and the establishment of new solute–solvent interactions.     

γ辐照引发[Cnmim][NTf2]离子液体变色研究

1-烷基-3-甲基咪唑双三氟甲基磺酰胺型离子液体(C_nmim][NTf₂])被认为是最有希望用于核燃料循环中的分离试剂之一, 虽然其化学结构在辐照过程中变化不大, 但在受到γ辐照后会发生明显的变色, 因此有必要研究该类离子液体的变色原因. 本文以⁶⁰Co为辐照源, 系统研究了辐照后不同C(1)－烷基链长和咪唑环上C(2)位上的H被甲基取代后离子液体的紫外-可见(UV-Vis)吸收光谱行为, 并结合辐照后离子液体荧光光谱和质谱的变化, 分析了导致该类离子液体辐照后颜色加深的原因. 结果表明, 随着咪唑环上C(1)―烷基链长度和剂量增大, 离子液体颜色加深; 而C(2)位上的H被甲基取代后颜色明显变浅. 辐照后咪唑型离子液体的变色主要来自于辐照后产生的烷基侧链含双键的咪唑阳离子, 咪唑阳离子二聚体和含氟咪唑化合物. 此外, γ辐照引起咪唑阳离子易发生π-π堆积, 而聚集态含量增加也会引起颜色加深.     

Ionic Liquids and Water: Hydrophobicity vs. Hydrophilicity

Many chemical processes rely extensively on organic solvents posing safety and environmental concerns. For a successful transfer of some of those chemical processes and reactions to aqueous media, agents acting as solubilizers, or phase-modifiers, are of central importance. In the present work, the structure of aqueous solutions of several ionic liquid systems capable of forming multiple solubilizing environments were modeled by molecular dynamics simulations. The effect of small aliphatic chains on solutions of hydrophobic 1-alkyl-3-methylimidazolium bis(trifluoromethyl)sulfonylimide ionic liquids (with alkyl = propyl [C₃C₁im][NTf₂], butyl [C₄C₁im][NTf₂] and isobutyl [iC₄C₁im][NTf₂]) are covered first. Next, we focus on the interactions of sulphonate- and carboxylate-based anions with different hydrogenated and perfluorinated alkyl side chains in solutions of [C₂C₁im][C_nF_2n+1SO₃], [C₂C₁im][C_nH_2n+1SO₃], [C₂C₁im][CF₃CO₂] and [C₂C₁im][CH₃CO₂] (n = 1, 4, 8). The last system considered is an ionic liquid completely miscible with water that combines the cation N-methyl-N,N,N-tris(2-hydroxyethyl)ammonium [N_{1 2OH 2OH 2OH}]⁺, with high hydrogen-bonding capability, and the hydrophobic anion [NTf₂]^–. The interplay between short- and long-range interactions, clustering of alkyl and perfluoroalkyl tails, and hydrogen bonding enables a wealth of possibilities in tailoring an ionic liquid solution according to the needs.     

Tetrahalidometallate(II) Ionic Liquids with More than One Metal: The Effect of Bromide versus Chloride

Fifteen N-butylpyridinium salts – five monometallic [C₄Py]₂[MBr₄] and ten bimetallic [C₄Py]₂[M_0.5^aM_0.5^bBr₄] (M=Co, Cu, Mn, Ni, Zn) – were synthesized, and their structures and thermal and electrochemical properties were studied. All the compounds are ionic liquids (ILs) with melting points between 64 and 101 °C. Powder and single-crystal X-ray diffraction show that all ILs are isostructural. The electrochemical stability windows of the ILs are between 2 and 3 V. The conductivities at room temperature are between 10⁻⁵ and 10⁻⁶ S cm⁻¹. At elevated temperatures, the conductivities reach up to 10⁻⁴ S cm⁻¹ at 70 °C. The structures and properties of the current bromide-based ILs were also compared with those of previous examples using chloride ligands, which illustrated differences and similarities between the two groups of ILs.     

Speciation of Aluminium in Mixtures of the Ionic Liquids [C3mpip][NTf2] and [C4mpyr][NTf2] with AlCl3: An Electrochemical and NMR Spectroscopy Study

This paper reports on the electrodeposition of aluminium on several substrates from the air‐ and water‐stable ionic liquids 1‐propyl‐1‐methylpiperidinium bis(trifluoromethylsulfonyl)amide ([C₃mpip][NTf₂]) and 1‐butyl‐1‐methylpyrrolidinium bis(trifluoromethylsulfonyl)amide ([C₄mpyr][NTf₂]), which contain anhydrous AlCl₃. At an AlCl₃ concentration of 0.75 molal, no evidence for aluminium electrodeposition was observed in either system at room temperature. However, aluminium electrodeposition becomes feasible upon heating the samples to 80 °C. Aluminium electrodeposition from bis(trifluoromethylsulfonyl)amide‐based ionic liquids that contain AlCl₃ has previously been shown to be very dependent upon the AlCl₃ concentration and has not been demonstrated at AlCl₃ concentrations below 1.13 molal. The dissolution of AlCl₃ in [C₃mpip][NTf₂] and [C₄mpyr][NTf₂] was studied by variable‐temperature ²⁷Al NMR spectroscopy to gain insights on the electroactive species responsible for aluminium electrodeposition. A similar change in the aluminium speciation with temperature was observed in both ionic liquids, thereby indicating that the chemistry was similar in both. The electrodeposition of aluminium was shown to coincide with the formation of an asymmetric four‐coordinate aluminium‐containing species with an ²⁷Al chemical shift of δ=94 and 92 ppm in the [C₃mpip][NTf₂]–AlCl₃ and [C₄mpyr][NTf₂]–AlCl₃ systems, respectively. It was concluded that the aluminium‐containing species that give rise to these resonances corresponds to the electroactive species and was assigned to [AlCl₃(NTf₂)]^?.     

Ionic Fluids Containing Both Strongly and Weakly Interacting Ions of the Same Charge Have Unique Ionic and Chemical Environments as a Function of Ion Concentration

Liquid multi‐ion systems made by combining two or more salts can exhibit charge ordering and interactions not found in the parent salts, leading to new sets of properties. This is investigated herein by examining a liquid comprised of a single cation, 1‐ethyl‐3‐methylimidazolium ([C₂mim]⁺), and two anions with different properties, acetate ([OAc]^?) and bis(trifluoromethylsulfonyl)imide ([NTf₂]^?). NMR and IR spectroscopy indicate that the electrostatic interactions are quite different from those in either [C₂mim][OAc] or [C₂mim][NTf₂]. This is attributed to the ability of [OAc]^? to form complexes with the [C₂mim]⁺ ions at greater than 1:1 stoichiometries by drawing [C₂mim]⁺ ions away from the less basic [NTf₂]^? ions. Solubility studies with molecular solvents (ethyl acetate, water) and pharmaceuticals (ibuprofen, diphenhydramine) show nonlinear trends as a function of ion content, which suggests that solubility can be tuned through changes in the ionic compositions.     

Influence of 1-alkyl-3-methylimidazolium tetrafluoroborate on the lamellar liquid crystal formed by tetraethylene glycol lauryl ether and water

Lyotropic liquid crystals (LLCs) formed in tetraethylene glycol lauryl ether–water system by the addition of 1-alkyl-3-methylimidazolium tetrafluoroborate ([C _n Mim][BF₄], n?=?2, 4, 6, 8, 10) are characterised by polarised optical microscopy and small-angle X-ray scattering techniques. A small number of [C _n Mim][BF₄] molecules can be solubilised in the liquid crystal without changing the lamellar type. These imidazolium salts are considered as an ideal kind of modifiers for the ordered structure. With different lengths of alkyl chains, [C _n Mim][BF₄] molecules appear in various domains of ordered assemblies: in the water layer for [C₂Mim][BF₄], in the water layer as well as in the polar domain for [C₄Mim][BF₄] and in the apolar domain for the other imidazolium salts with long alkyl chains. Diverse distributions of [C _n Mim][BF₄] molecules in the inner structure bring about their specific influence on the lamellar phase. These results enlighten the use of diverse alkyl-substituted imidazolium salts in modulating LLC and other assemblies and also enrich the aggregation behaviour of these assemblies.     

Ionic Liquids with More than One Metal: Optical and Electrochemical Properties versus d-Block Metal Combinations

Thirteen N-butylpyridinium salts, including three monometallic [C₄Py]₂[MCl₄], nine bimetallic [C₄Py]₂[M_1−x^aM_x^bCl₄] and one trimetallic compound [C₄Py]₂[M_1−y-z^aM_y^bM_z^cCl₄] (M=Co, Cu, Mn; x=0.25, 0.50 or 0.75 and y=z=0.33), were synthesized and their structure and thermal and electrochemical properties were studied. All compounds are ionic liquids (ILs) with melting points between 69 and 93 °C. X-ray diffraction proves that all ILs are isostructural. The conductivity at room temperature is between 10⁻⁴ and 10⁻⁸ S cm⁻¹. Some Cu-based ILs reach conductivities of 10⁻² S cm⁻¹, which is, however, probably due to IL dec. This correlates with the optical bandgap measurements indicating the formation of large bandgap semiconductors. At elevated temperatures approaching the melting points, the conductivities reach up to 1.47×10⁻¹ S cm⁻¹ at 70 °C. The electrochemical stability windows of the ILs are between 2.5 and 3.0 V.     

Pseudohalogen Chemistry in Ionic Liquids with Non-innocent Cations and Anions

Within the second funding period of the SPP 1708 “Material Synthesis near Room Temperature”,which started in 2017, we were able to synthesize novel anionic species utilizing Ionic Liquids (ILs) both, as reaction media and reactant. ILs, bearing the decomposable and non-innocent methyl carbonate anion [CO₃Me]⁻, served as starting material and enabled facile access to pseudohalide salts by reaction with Me₃Si−X (X=CN, N₃, OCN, SCN). Starting with the synthesized Room temperature Ionic Liquid (RT-IL) [nBu₃MeN][B(OMe)₃(CN)], we were able to crystallize the double salt [nBu₃MeN]₂[B(OMe)₃(CN)](CN). Furthermore, we studied the reaction of [WCC]SCN and [WCC]CN (WCC=weakly coordinating cation) with their corresponding protic acids HX (X=SCN, CN), which resulted in formation of [H(NCS)₂]⁻ and the temperature labile solvate anions [CN(HCN)_n]⁻ (n=2, 3). In addition, the highly labile anionic HCN solvates were obtained from [PPN]X ([PPN]=μ-nitridobis(triphenylphosphonium), X=N₃, OCN, SCN and OCP) and HCN. Crystals of [PPN][X(HCN)₃] (X=N₃, OCN) and [PPN][SCN(HCN)₂] were obtained when the crystallization was carried out at low temperatures. Interestingly, reaction of [PPN]OCP with HCN was noticed, which led to the formation of [P(CN)₂]⁻, crystallizing as HCN disolvate [PPN][P(CN⋅HCN)₂]. Furthermore, we were able to isolate the novel cyanido(halido) silicate dianions of the type [SiCl_0.78(CN)_5.22]²⁻ and [SiF(CN)₅]²⁻ and the hexa-substituted [Si(CN)₆]²⁻ by temperature controlled halide/cyanide exchange reactions. By facile neutralization reactions with the non-innocent cation of [Et₃HN]₂[Si(CN)₆] with MOH (M=Li, K), Li₂[Si(CN)₆] ⋅ 2 H₂O and K₂[Si(CN)₆] were obtained, which form three dimensional coordination polymers. From salt metathesis processes of M₂[Si(CN)₆] with different imidazolium bromides, we were able to isolate new imidazolium salts and the ionic liquid [BMIm]₂[Si(CN)₆]. When reacting [Mes(nBu)Im]₂[Si(CN)₆] with an excess of the strong Lewis acid B(C₆F₅)₃, the voluminous adduct anion {Si[CN⋅B(C₆F₅)₃]₆}²⁻ was obtained.     

CMPO/[Cnmim][NTf2]体系对Eu3+和UO22+的萃取行为

讨论了辛基(苯基)-N,N-二异丁基胺甲酰基甲基氧化膦(CMPO)/1-烷基-3-甲基咪唑双(三氟甲烷磺酰)亚胺盐([C_nmim][NTf_2],n=2,8,12)萃取体系分别对硝酸溶液中的铕离子(Eu~(3+))和铀酰根离子(UO_2~(2+))的萃取行为。主要研究了硝酸浓度、接触时间、温度、CMPO浓度对CMPO/[C_nmim][NTf_2]体系萃取性能的影响,并选取CMPO/[C_2mim][NTf_2]体系对模拟高放废液中的镧锕元素进行了萃取分离。结果表明:随着离子液体侧链长度增长,萃取平衡时间逐渐延长;CMPO/[C3+2mim][NTf_2]体系对Eu的萃取是放热反应,萃取率随酸度增加而逐渐降低,对UO_2~(2+)则是吸热反应,萃取率随酸度增加而逐渐升高;通过机理研究,推测出对Eu~(3+)的萃取反应是离子交换,而对UO_2~(2+)的萃取反应则是中性配位;CMPO/[C_2mim][NTf_2]体系能有效的萃取模拟高放废液中的镧系、锕系元素,且在高酸下有一定的镧锕分离效果。     

High temperature and highly selective stationary phases of ionic liquid bonded polysiloxanes for gas chromatography

Due to the special performance of “dual nature” and synthetic flexibility, ionic liquids (ILs) have been an attractive research subject of stationary phases for gas chromatography (GC). In this work, a novel ionic liquid (IL) bonded polysiloxane ([PSOMIM][NTf₂]) with anion of bis-trifluoromethanesulfonylimide (NTf₂⁻) was synthesized, and another one with chloride anion ([PSOMIM][Cl]) was also prepared for the purpose of comparison. The thermo-stability of the product was evaluated by thermogravimetric (TG) test and the result indicated that [PSOMIM][NTf₂] did not decompose slightly until 380 °C. Then the solvation behaviors of the ILs were characterized using solvation parameter model. Subsequently, [PSOMIM][NTf₂] and [PSOMIM][Cl] were used as stationary phases to prepare capillary columns for GC, respectively. The column efficiency of [PSOMIM][NTf₂] column was 4776 plates/m (k = 3.64 ± 0.08, naphthalene), and that of the other one was 3170 plates/m (k = 2.84 ± 0.11, naphthalene). The selectivity of the novel stationary phases for analytes, including Grob reagent, aromatic positional isomers was further evaluated. Furthermore, the chromatograms of n-alkanes and polycyclic aromatic hydrocarbons (PAHs) on [PSOMIM][NTf₂] column were compared with that on [PSOMIM][Cl] column. [PSOMIM][NTf₂] stationary phase also exerted good selectivity for fatty acid methyl esters (FAMEs), polychlorinated biphenyls (PCBs) and aromatic amines.     

Thermodynamic properties and polymorphism of 1-alkyl-3-methylimidazolium bis(triflamides)

Heat capacities in a range of temperatures of (5 to 370) K, enthalpies and temperatures of phase transitions for 1-ethyl-3-methylimidazolium bis(triflamide) ([C₂mim][NTf₂]) and 1-octyl-3-methylimidazolium bis(triflamide) ([C₈mim][NTf₂]) have been determined by adiabatic calorimetry. [C₂mim][NTf₂] has been found to form four crystalline phases with different fusion temperatures. Formation of the phases can be controlled by the temperature of annealing during crystallization. [C₈mim][NTf₂] forms three sequences of crystalline modifications, each including two polymorphs. Based on results of the measurements, thermodynamic functions for the compounds under study have been calculated.A heat-capacity anomaly near T = 230 K reported earlier for [C₄mim][NTf₂] and [C₆mim][NTf₂] have been found in some crystalline modifications of both the studied compounds. The position of the anomaly depends on the temperature of annealing of the crystals.     

Low Temperature Activation of Tellurium and Resource-Efficient Synthesis of AuTe2 and Ag2Te in Ionic Liquids

The low temperature syntheses of AuTe₂ and Ag₂Te starting from the elements were investigated in the ionic liquids (ILs) [BMIm]X and [P₆₆₆₁₄]Z ([BMIm]⁺=1-butyl-3-methylimidazolium; X = Cl, [HSO₄]⁻, [P₆₆₆₁₄]⁺ = trihexyltetradecylphosphonium; Z = Cl⁻, Br⁻, dicyanamide [DCA]⁻, bis(trifluoromethylsulfonyl)imide [NTf₂]⁻, decanoate [dec]⁻, acetate [OAc]⁻, bis(2,4,4-trimethylpentyl)phosphinate [BTMP]⁻). Powder X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy revealed that [P₆₆₆₁₄]Cl is the most promising candidate for the single phase synthesis of AuTe₂ at 200 °C. Ag₂Te was obtained using the same ILs by reducing the temperature in the flask to 60 °C. Even at room temperature, quantitative yield was achieved by using either 2 mol % of [P₆₆₆₁₄]Cl in dichloromethane or a planetary ball mill. Diffusion experiments, ³¹P and ¹²⁵Te-NMR, and mass spectroscopy revealed one of the reaction mechanisms at 60 °C. Catalytic amounts of alkylphosphanes in commercial [P₆₆₆₁₄]Cl activate tellurium and form soluble phosphane tellurides, which react on the metal surface to solid telluride and the initial phosphane. In addition, a convenient method for the purification of [P₆₆₆₁₄]Cl was developed.