Novel method to prepare morphologically rich polymeric surfaces for biomedical applications via phase separation and arrest of microgel particles

We outline here a simple method to prepare polymeric surfaces of controlled surface topography on the micrometer scale, via assembly and arrest of microgel particles, for use in a range of biological applications to modify cell adhesion and spreading. In previous work by other groups, it has transpired that topography on the nanoscale is unlikely to be useful for this purpose, as roughness on this scale is often covered or coated by serum derived proteins during the early stages of cell adhesion and cells can easily bridge nanoscale roughness. Therefore, in our work, we have focused on roughness or topographic variations on the micrometer length scale. The basic idea is to modify the interactions between particles, thereby causing the microgel particles to phase separate into particle-dense and particle-dilute domains and to arrest these domains on the surface. The result is the creation of surfaces with controlled topography. By changing the particle size, it is possible to alter the size of the pores formed and their distribution in the film. Preliminary results show that the system can readily be arrested into a homologous series of such structures (formed from microgel particles of the same size and same chemical structure) with biological implications. At the extremes of this series, large phenotypic differences are observed between cells, ranging (at one end) from localization of the cells in the pores to (at the other end) cells that avoid such localization, and remain extended, growing along the ridges between the pores. This constitutes a sort of cell localization transition on a surface with identical chemical components, where only the morphology has been adjusted.     

N‐vinylcaprolactam‐based microgels for biomedical applications

Three types of poly(N‐vinylcaprolactam)‐based temperature‐sensitive microgel particles were synthesized by emulsion polymerization. The uptake of a model drug (calcein) into the particles was analyzed in terms of the amount of calcein absorbed and equilibrium–swelling degree. By incubating the microgels with primary neuronal cell cultures of embrionary rats, cell viability and biocompatibility tests were carried out. The results show that the driving force for the model drug to penetrate into the microgel particles is H‐bonding associations. On the other hand, cell death was microgel concentration and incubation period dependent. Microgels can be stored in a dried state and resuspended in water when necessary without changing their swelling–deswelling ability. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1173–1181, 2010     

Poly(vinylpyridine) core/poly(N-isopropylacrylamide) shell microgel particles: their characterization and the uptake and release of an anionic surfactant

The use of microgel particles for controlled uptake and release of active species has great potential. The compatibility of microgel particles with their environment and the functionality of the particles can be achieved by modification of the core microgel through the addition of a shell. In this work, core-shell microgel particles, with a pH-responsive core (polyvinylpyridine) and a temperature-responsive shell (poly-N-isopropylacrylamide), have been prepared and characterized. The uptake and release of an anionic surfactant from the microgels has been investigated as a function of solution pH and temperature. The results indicate that electrostatic attraction between the anionic surfactant and the cationically charged core of the microgel particles is the dominant mechanism for absorption of the surfactant into the core-shell microgel particles.     

Responsive hydrogel colloids: Structure,interactions, phase behavior,and equilibrium and nonequilibrium transitions of microgel dispersions

Soft and responsive colloids based on polymer hydrogels have moved into the focus of the colloid community. This review gives a brief overview of the recent literature on the structure and phase behavior of neutral and ionic poly(N-isopropylacrylamide) microgel dispersions from dilute to over-packed conditions, focusing in particular on the ability of these particles to adapt their size and shape in response to external stimuli. The review is hierarchical; it first covers the aspects of an individual microgel particle viz., the internal structure of inhomogeneous and homogeneously cross-linked particles, followed by studies of ensembles of particles covering in particular structural ordering, phase behavior, and liquid–solid and solid–solid transitions. Insights on the ability of the microgel particles to deform, compress, and interpenetrate beyond the close-packed volume fractions are discussed. Building complex architectures using microgel particles for fundamental studies as well as future applications is reviewed towards the end of the article.     

Poly(N-vinylcaprolactam-co-glycidyl methacrylate) aqueous microgels labeled with fluorescent LaF3:Eu nanoparticles

We describe the synthesis and properties of functional microgel particles based on poly(N-vinylcaprolactam-co-glycidyl methacrylate) (PVCL/PGMA) copolymer. A series of colloidally stable microgel particles with a range of glycidyl methacrylate content were prepared by surfactant-free heterophase polymerization in water. The microgel particles obtained had hydrodynamic radii between 250 and 350 nm and were fairly monodisperse in size; however, a broadening of the particle size distribution was observed for samples with a low GMA content. The PVCL/PGMA microgel particles exhibit thermally responsive reversible changes in diameter in water, and the swelling degree increased with the PVCL fraction in the copolymer structure. These microgels were then modified with photoluminescent europium-doped lanthanum fluoride nanoparticles (LaF3:Eu-AEP) through reaction of the 2-aminoethyl phosphate surface ligands with epoxy groups present in the microgel. These hybrid microgels were colloidally stable and thermally responsive in aqueous solution.     

微凝胶胶体晶体研究进展

Poly(N-isopropylacrylamide)(PNIPAM)微凝胶粒子是一种软的胶体粒子.和单分散的SiO_2、PS、PMMA等硬的胶体粒子一样,单分散的PNIPAM微凝胶粒子也可以自组装成为高度有序的胶体晶体.微凝胶粒子软物质的特性及其对外部刺激的响应性赋予其不同于硬球的组装行为.微凝胶胶体晶体的高度有序结构及其刺激响应性使其在诸多领域有重要用途.本文分别介绍了三维及二维微凝胶胶体晶体组装的研究进展,并对已开发的基于微凝胶胶体晶体的应用进行了总结.     

Particulate and continuum mechanics of microgel pastes: effect and non-effect of compositional heterogeneity

Microgels are deformable colloids that can be packed by external compression; such packing transforms a suspension of loose microgels into a viscoelastic paste with mechanical properties controlled by the elasticity of the constituent particles. We aim to understand how the presence of microgel particles with different individual elastic moduli affects this interplay in heterogeneous microgel packings. We do this by preparing microgel pastes that contain both soft, loosely cross-linked and stiff, densely cross-linked microgel particles and probe their shear elasticity. We consider particle packing fractions that cover the range from particles at the onset of contact to particles that are strongly packed, deformed, and deswollen to investigate the transition from a particulate suspension to a macrogel-type system. These studies reveal that the elasticity of heterogeneous microgel suspensions at low packing is due to the response of the soft, easily deformable microgel particles alone, whereas at high packing both soft and stiff microgels linearly add to the paste elasticity. This fundamental difference is due to the fundamentally different origin of elasticity at different microgel packing; whereas the soft particle interaction potential dominates the suspension mechanics at low microgel packing, rubber-like elasticity that equally reflects both soft and stiff contributions governs the mechanics of the same samples at high microgel packing.     

Dynamic control of volume phase transitions of poly(N‐isopropylacrylamide) based microgels in water using hydrazide‐aldehyde chemistry

We demonstrate that the volume phase transition temperature (VPTT) of copolymer microgel particles made from N‐isopropylacrylamide (NIPAm) and methacryloyl hydrazide (MH) can be tailored in a reversible manner upon the reaction of the hydrazide functional groups with aldehydes. The microgels were synthesized by precipitation polymerization in water. Due to the water‐soluble nature of the MH monomer, the VPTT at which the microgel particles contract shifts to higher values by increasing the incorporated amounts of methacryloyl hydrazide from 0 to 5.0 mol %. The VPTT of the copolymer microgel dispersions in water can be fine‐tuned upon addition of hydrophobic/hydrophilic aldehydes, which react with the hydrazide moiety to produce the hydrazone analogue. This hydrazone formation is reversible, which allows for flexible, dynamic control of the thermo‐responsive behavior of the microgels. The ability to “switch” the VPTT was demonstrated by exposing hydrophilic streptomycin sulfate salt incubated microgel particles to an excess of a hydrophobic aldehyde, that is benzaldehyde. The temperature at which these microgels contracted in size upon heating was markedly lowered in these aldehyde exchange experiments. Transformation into benzaldehyde hydrazone derivatives led to assembly of the microgel particles into small colloidal clusters at elevated temperatures. This control of supracolloidal cluster formation was also demonstrated with polystyrene particles which had a hydrazide functionalised microgel shell. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1745–1754     

以微凝胶模板合成P(AM-co-DMC)/SiO_2杂化粒子

以聚(丙烯酰胺-co-甲基丙烯酰氧乙基三甲基氯化铵)[P(AM-co-DMC)]微凝胶为模板,TMOS为硅前驱体,中性水环境下合成了一系列P(AM-co-DMC)/SiO2有机-无机杂化粒子.对杂化粒子的大小、形态及表面形貌等进行研究,发现微凝胶对杂化粒子的形态和大小起主导作用,SiO2在模板上沉积,即使经过灼烧依然保持模板的形态;TMOS的用量对杂化粒子的性质也有重要影响——用量少时,得到的杂化粒子表面粗糙,增加用量会使表面变得光滑.杂化粒子经过灼烧后,表面会变得更加粗糙.     

聚(N-异丙基丙烯酰胺)水凝胶微球体积相变的研究

窄分散的聚（Ｎ 异丙基丙烯酰胺）水凝胶微球用乳液聚合方法制备，并用动态和静态光散射对其体积相变进行了研究．与水中聚（Ｎ 异丙基丙烯酰胺）线性单链比较，水中凝胶微球的体积相变温度较高，对温度的响应比较平缓．相变是连续的，有别于大块凝胶非连续的体积变化．在体积相变过程中，凝胶微球始终是密度均一的热力学稳定球体．从相变过程网络密度的变化可以确定，绝大部分的水在收缩过程被排了出来，但在紧缩的凝胶微球中仍含有约７０％的水．     

Review on the dynamics and micro-structure of pH-responsive nano-colloidal systems

This review presents an overview on the research on pH-responsive microgel particles in the last 10 years. Microgels are cross-linked latex particles that are swollen in a good solvent. Significant quantitative studies have been conducted to investigate the swelling behavior (microscopic) and rheological (macroscopic) properties of the pH-responsive microgel particles as a function of neutralization degree, ionic strength, and cross-linked density. Mono-dispersed, alkali-swellable microgels containing carboxylic acid lattices, whose properties display extreme pH sensitivity in water is considered in detail in terms of swelling behavior and rheological properties. Their stability in solution and ability to undergo reversible volume phase transitions in response to pH makes them ideal model systems for the development of a semi-empirical as well as theoretical approach for predicting the viscosity of dilute and concentrated hard and soft sphere systems. The review concludes with a discussion of some recent applications of pH-responsive microgel particles.     

On the structure of poly(N-isopropylacrylamide) microgel particles

This investigation presents a study of the internal structure of poly(NIPAM/xBA) microgel particles (NIPAM and BA are N-isopropylacrylamide and N,N'-methylene bisacrylamide, respectively). In this study, x is the wt % of BA used during microgel synthesis. Two values of x were used to prepare the microgels, 1 and 10. The microgel dispersions were investigated using photon correlation spectroscopy (PCS) and small-angle neutron scattering (SANS). These measurements were made as a function of temperature in the range 30-50 degrees C. Scattering maxima were observed for the microgels when the dispersion temperatures were less than their volume phase transition temperatures. The SANS data were fitted using a model which consisted of Porod and Ornstein-Zernike form factors. The analysis showed that the macroscopic hydrodynamic diameter of the microgel particles and the submicroscopic mesh size of the network are linearly related. This is the first study to demonstrate affine swelling for poly(NIPAM/xBA) microgels. Furthermore, the mesh size does not appear to be strongly affected by x. The data suggest that the swollen particles have a mostly homogeneous structure, although evidence for a thin, low segment density shell is presented. The study confirms that poly(NIPAM/xBA) microgel particles have a core-shell structure. The shell has an average thickness of approximately 20 nm for poly(NIPAM/1BA) particles which appears to be independent of temperature over the range studied. The analysis suggests that the particles contained approximately 50 vol % water at 50 degrees C. The molar mass of the poly(NIPAM/1BA) microgel particles was estimated as 6 x 10(9) g mol(-1).     

Distribution of CdSe quantum dots within swollen polystyrene microgel particles using confocal microscopy

CdSe quantum dots (QDs) are semiconducting nanoparticles that fluoresce when stimulated by visible light. This property has been exploited in their use as tracer particles in biomedical applications. In this study, confocal microscopy has been used to determine the distribution of QDs within polystyrene microgel particles, dispersed in an organic solvent. It was found that the extent of microgel swelling affected the penetration of the QDs into the particles. Only when the microgel particles were swollen to their maximum extent were the QDs able to penetrate into the central core region of the particles.     

Functionalization of cotton with poly-NiPAAm/chitosan microgel: Part II. Stimuli-responsive liquid management properties

An innovative strategy for functional finishing of cotton involves application of stimuli-responsive surface modifying system based on temperature- and pH-responsive poly-NiPAAm/chitosan microgel. The stimuli-responsiveness implied to cotton is the consequence of swelling/collapse of the microgel particles incorporated to the fibre surface, which produces an active liquid management system. The performance of functionalized cotton fabric in terms of liquid management properties was assessed by choosing appropriate techniques (water uptake; thin-layer wicking; water retention capacity; and drying capability) and discussion of the results was based on the types of water that are expected to be present in hydrated cotton and stimuli-responsive microgel.     

Absorption of cetylpyridinium chloride into poly(N-isopropylacrylamide)-based microgel particles, in dispersion and as surface-deposited monolayers

The addition of cetylpyridinium chloride (CPC) to aqueous dispersions of poly(N-isopropylacrylamide) [poly(NIPAM)] and poly(N-isopropylacrylamide-co-acrylic acid) [poly(NIPAM-co-AAc)] microgel particles leads to absorption of the CPC into the particles and to corresponding changes in their hydrodynamic diameter. With the latter set of particles there is a strong pH dependence. The dependence of both hydrodynamic diameter and electrophoretic mobility of the microgel particles on the added CPC concentration show a strong correlation with CPC uptake, as obtained from direct CPC absorption measurements. Various mechanisms for CPC absorption into the microgel particles are postulated, including electrostatic, polar, and hydrophobic interactions. A comparison has also been made between the effect of added CPC on the hydrodynamic diameter of free microgel particles in dispersion, determined by dynamic light scattering, and the thickness of adsorbed monolayers of the same microgel particles deposited on cationically modified, oxidized silicon surfaces, as determined from ellipsometry measurements. The trends observed in both cases are broadly similar. This work opens the way for development of microgel layers for controlled uptake and release applications.     

Temperature-responsive semipermeable capsules composed of colloidal microgel spheres

We present semipermeable, hollow capsules (colloidosomes) that expand and contract upon heating and cooling. The capsules are composed of micrometer-sized poly(N-isopropylacrylamide)-co-acrylic acid microgel particles, which exhibit a reversible size transition near 34 degrees C. The microgel particles assemble on the surfaces of water droplets in oil. Addition of the diblock copolymer poly(butadiene-b-N-methyl 4-vinyl pyridinium iodide) to the oil results in soft, elastic membranes of microgel particles that remain intact after the droplet interfaces are dissolved. Under heating, the capsules contract reversibly by 13% or irreversibly by 40% in radius. These stimulus-responsive colloidosomes might be useful for controlled release or as microscopic actuators.     

Microgel Capsules Tailored by Droplet‐Based Microfluidics

Microgel capsules are micrometer‐sized particles that consist of a cross‐linked, solvent‐swollen polymer network complexed with additives. These particles have various applications, such as drug delivery, catalysis, and analytics. To optimize the performance of microgel capsules, it is crucial to control their size, shape, and content of encapsulated additives with high precision. There are two classes of microgel‐capsule structures. One class comprises bulk microcapsules that consist of a polymer network spanning the entire particle and entrapping the additive within its meshes. The other class comprises core–shell structures; in this case, the microgel polymer network just forms the shell of the particles, whereas their interior is hollow and hosts the encapsulated payload. Both types of structures can be produced with exquisite control by droplet‐based microfluidic templating followed by subsequent droplet gelation. This article highlights some early and recent achievements in the use of this technique to tailor soft microgel capsules; it also discusses applications of these particles. A special focus is on the encapsulation of living cells, which are very sensitive and complex but also very useful additives for immobilization within microgel particles.     

Swelling behavior of poly- N-isopropylacrylamide microgel particles in alcoholic solutions

 It has been shown that the swelling of poly-N-isopropyl-acrylamide (poly-NIPAM) microgel particles can be controlled by the addition of alcohols, in addition to the previously observed effect of temperature. The degree of swelling is also controlled by the amount of cross-linker within the microgel particles. At 25 ^°C, poly-NIPAM microgel particles collapse upon the addition of MeOH, EtOH and 2-PrOH to a minimum size and then, reswell again as the alcohol-rich region is approached. This trend was also observed for poly-NIPAM microgel particles dispersed in 2-PrOH/water mixtures upon heating to 50 ^°C. The particles, dispersed in either water or alcohol/water mixtures were found to be stable to flocculation between 25 ^°C and 50 ^°C. Received: 27 February 1997 Accepted: 5 August 1997     

Aqueous dispersions of cubic lipid–water phases

Inverse lipid–water phases such as cubic phases can form kinetically stable dispersions by fragmentation in water. Cubic lipid phases can be dispersed by polar lipids favoring lamellar phases or by block copolymers, which can close the bilayer at the surface so that the hydrocarbon chain core is not exposed to water. Monodisperse particles based on glycerol monooleate, with their bilayer curved as the P-, D- or G-minimal surface, have been prepared in this way. Their inner bilayer conformation and outer shape have been examined, mainly by X-ray diffraction and cryo transmission electron microscopy. There is also a different type of cubic lipid bilayer particles with a periodicity in the micrometer range, which have been identified in phospholipid–water dispersions and in cell membrane assemblies. The mechanism behind formation in vivo of such cubic membranes, which also follow the P-, D- and G-surfaces, is discussed. Other lipid–water dispersions with lower symmetry are finally considered; dispersions formed by the inverse hexagonal phase and the dispersed state of a tetragonal bilayer structure formed by lung surfactants.     

Polyurethane acrylate microgel synthesized by emulsion polymerization using unsaturated self-emulsified polymer

Polyurethane (PU) acrylate microgels were obtained by emulsion polymerization of self-emulsified PU acrylate terminated by 2-hydroxyethyl methacrylate without any extra emulsifier and crosslinker. Moreover, the PU acrylate was also used as stabilizer and crosslinker to synthesize poly(methyl methacrylate) (PMMA)–PU composite microgels via emulsion polymerization, which provided a new method to synthesize PU microgels and their composite microgels. The kinetics of microgel synthesis was studied by gel permeation chromatography. The dynamic rheological behaviors indicated that a crosslinked structure was formed. The frequency dependency of the loss tangent and complex viscosities showed strong relationships with the microgel structure. Those microgels with rigid PMMA core showed higher ability to slide than the soft PU acrylate microgel, which had influence on the changing of loss tangent with frequency. All the microgels swollen in tetrahydrofuran exhibited high viscosities and strong shear-thinning behaviors. As a sort of flexible microgel, the PU microgel was able to form a coherent film at room temperature, which was distinct from hard microgels.