A miniaturized solid-contact potentiometric multisensor platform for determination of ionic profiles in human saliva

This paper describes a miniaturized multisensor platform (MP-ISES) consisting of electrodes: a reference one (RE) and ion-selective electrodes (ISEs) for monitoring Na⁺, K⁺, Ca²⁺, Mg²⁺, Cl⁻, and SCN⁻ ions and pH in human saliva. Gold electrode surface was modified by deposition of two layers: electrosynthesized PEDOT:PSS forming an intermediate layer, and ion-selective membrane. The developed ISEs were characterized by a wide linear range and sensitivity consistent with the Nernst model. The entire MP-ISEs are characterized by satisfactory metrological parameters demonstrating their applicability in biomedical research, in particular in measurements concerning determination of ionic profiles of saliva. Saliva samples of 18 volunteers aged from 20 to 26 participating in a month experiment had been daily collected and investigated using the MP-ISEs assigned individually to each person. Personalized profiles of ions (ionograms) in saliva, such as Na⁺, K⁺, Ca²⁺, Mg²⁺, Cl⁻, SCN⁻, and H⁺, were obtained.

     

ESI‐MS studies of the non‐covalent interactions between biologically important metal ions and N‐sulfonylcytosine derivatives

The aim of this report is to present the electrospray ionization mass spectrometry results of the non‐covalent interaction of two biologically active ligands, N‐1 ‐ (p‐toluenesulfonyl)cytosine, 1‐TsC, 1 and N‐1 ‐ methanesulfonylcytosine, 1‐MsC, 2 and their Cu(II) complexes Cu(1‐TsC‐N3)₂Cl₂, 3 and Cu(1‐MsC‐N3)₂Cl₂ and 4 with biologically important cations: Na⁺, K⁺, Ca²⁺, Mg²⁺ and Zn²⁺. The formation of various complex metal ions was observed. The alkali metals Na⁺ and K⁺ formed clusters because of electrostatic interactions. Ca²⁺ and Mg²⁺ salts produced the tris ligand and mixed ligand complexes. The interaction of Zn²⁺ with 1–4 produced monometal and dimetal Zn²⁺ complexes as a result of the affinity of Zn²⁺ ions toward both O and N atoms. Copyright © 2016 John Wiley & Sons, Ltd.     

Estimation of Li+, K+ and Ca2+ Complexation with [12] crown-4, [15] crown-5 and [18] crown-6 Using a Na+ ISE in Dioxane-Water, Part IV*

 The (1:1) Na⁺ equilibrium constants, Ke1, of macrocyclic ethers of [12]crown-4, [12]crown-5 and [18]crown-6 were determined with a Na⁺ ISE in the presence of a second cation e.g. Li⁺, K⁺ and Ca²⁺ in dioxane/water (50/50). We estimated the (1:1) equilibrium constants, K e2 of the macrocyclic ethers with Li⁺, K⁺ and Ca²⁺ by this way. The binding selectivity of a macrocyclic ether between two cations was estimated in the same binary solvent mixture where the water hydration role is diminished. Results showed clearly the effect of macrocyclic size and cation radii in a solution. Received October 27, 1998. Revision March 22, 1999.     

Effect of ring annelation on cations [M = H+, Li+, Na+, K+, Be2+, Mg2+, and Ca2+]…benzene interaction: A density functional theory investigation

Density functional theory calculation was carried out on cation‐π complexes formed by cations [M = H⁺, Li⁺, Na⁺, K⁺, Be²⁺, Mg²⁺, and Ca²⁺] and π systems of annelated benzene. The cation‐π bonding energy of Be²⁺ or Mg²⁺ with annelated benzene is very strong in comparison with the common cation‐π intermolecular interaction, and the bonding energies follow the order Be²⁺ > Mg²⁺ > Ca²⁺ > Li⁺ > Na⁺ > K⁺. Similarly, the interaction energies follow the trend 1‐M < 2‐M < 3‐M for all the metal cations considered. These outcomes may be due to the weak interactions of the metal cations with C? H and the interactions of metal cations with π in addition to the nature of a metal cation. We have also investigated on all the possible substituted sites, and find that the metal ion tends to interact with all ring atoms while proton prefers to bind covalently to one of the ring carbons. The binding of metal cations with annelated benzenes has striking effect on nuclear magnetic resonance chemical shifts using the gauge independent atomic orbital method. © 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2009     

Bingel–Hirsch Addition of Diethyl Bromomalonate to Ion-Encapsulated Fullerenes M@C60 (M=Ø, Li+, Na+, K+, Mg2+, Ca2+, and Cl−)

In the last 30 years, fullerene-based materials have become popular building blocks for devices with a broad range of applications. Among fullerene derivatives, endohedral metallofullerenes (EMFs, M@C_x) have been widely studied owing to their unique properties and reactivity. For real applications, fullerenes and EMFs must be exohedrally functionalized. It has been shown that encapsulated metal cations facilitate the Diels–Alder reaction in fullerenes. Herein, the Bingel–Hirsch (BH) addition of ethyl bromomalonate over a series of ion-encapsulated M@C₆₀ (M=Ø, Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, and Cl⁻; Ø@C₆₀ stands for C₆₀ without any endohedral metal) is quantum mechanically explored to analyze the effect of these ions on the BH addition. The results show that the incarcerated ion has a very important effect on the kinetics and thermodynamics of this reaction. Among the systems studied, K⁺@C₆₀ is the one that leads to the fastest BH reaction, whereas the slowest reaction is given by Cl⁻@C₆₀.     

金属离子(Na~+、K~+、Ca~(2+)、Mg~(2+)、Zn~(2+))与鸟嘌呤异构体配合物的稳定性

在B3LYP/6-311++G**水平上用极化连续介质模型(PCM)系统研究了金属离子(M+/2+=Na+,K+,Ca2+,Mg2+,Zn2+)和十三种鸟嘌呤异构体形成的配合物GnxM+/2+(n为鸟嘌呤异构体的编号,x表示M+/2+与鸟嘌呤异构体的结合位点)在气(g)液(a)两相中的稳定性顺序.着重探讨了液相中配合物的稳定性差异,并且从溶质-溶剂效应、结合能、形变能及异构体的相对能量等几个方面分析了造成稳定顺序发生变化的原因.报道了溶液中这五种金属离子与鸟嘌呤异构体结合形成的六种基态配合物:aG1N2,N3Na+,aG1N2,N3K+,aG1O6,N7Ca2+,aG1N2,N3Mg2+(aG1O6,N7Mg2+),aG2N3,N9Zn2+.可以看出,除了在Zn2+配合物中鸟嘌呤异构体为G2外,构成其余四种金属离子配合物的鸟嘌呤异构体都是G1,但结合位点不同.同时对气相中各类配合物稳定性也进行了系统的排序,并报道了几种较稳定的配合物,如:gG3N1,O6K+,gG5N1,O6K+,gG3N1,O6Ca2+/Mg2+,gG4O6,N7Ca2+/Mg2+.     

Theoretical study of interaction of 2,6-dithiopurine with Li+, Na+, K+, Be2+, Mg2+, and Ca2+ metal cations

The geometries of the complexes of Li⁺, Na⁺, K⁺, Be²⁺, Mg²⁺, and Ca²⁺ metal cations with different possible 2,6-dithiopurine anions (DTP) were studied. The complexes were optimized at the B3LYP level and the 6-311++G(d, p) basis set. The interactions of the metal cations at different nucleophilic sites of various possible 2,6-dithiopurine anions were considered. It was revealed that metal cations would interact with 2,6-dithiopurine anions in a bicoordinate manner. In the gas phase, the most preferred position for the interaction of Li⁺, Na⁺, and K⁺ cations is between the N₃ and S₂ sites, while all divalent cations Be²⁺, Mg²⁺, and Ca²⁺ prefer binding between the N₇ and S₆ sites of the corresponding 2,6-dithiopurine. The influence of aqueous solvent on the relative stability of different complexes has been examined using the Tomasi’s polarized continuum model. The basis set superposition error (BSSE) corrected interaction energy was also computed for complexes. The AIM theory has been applied to analyze the properties of the bond critical points (electron densities and their Laplacians) involved in the coordination between 2,6-dithiopurine anions and the metal cations. It was revealed that aqueous solution would have significant effect on the relative stability of complexes obtained by the interaction of 2,6-dithiopurine anions with Mg²⁺ and Ca²⁺ cations. The effect of metal cations on different NH and CS stretching vibrational modes of 2,6-dithiopurine has also been discussed.     

Ion-selective electrode for measuring low Ca2+ concentrations in the presence of high K+, Na+ and Mg2+ background

In this work, ion-selective electrodes for calcium ion were investigated. Two ionophores were used in the membranes: ETH 1001 and ETH 129. An internal filling solution buffered for primary ion was used that allowed the lower detection limit to be decreased down to 10^−8.8 M. Theoretical and experimental electrode characteristics pertaining to both primary and interfering ions are discussed. Better behavior was obtained with the electrode prepared with ETH 129 in the membrane. This electrode would be the most likely candidate for obtaining a low Ca²⁺ detection limit in measurements performed with high K⁺, Na⁺, Mg²⁺ background, which is found inside the cells of living organisms, for example. The potentiometric response of the electrode in solutions containing main and interfering ions is in good agreement with simulated curves obtained using the Nernst–Planck–Poisson (NPP) model.     

Effect of metal cations [Li+, Na+, K+, Be2+, Mg2+, and Ca2+] on the structure of 2‐(3′‐hydroxy‐2′‐pyridyl)benzoxazole: A theoretical investigation

Density functional theory calculations were performed at the B3LYP/6‐311++G(d,p) level to systematically explore the geometrical multiplicity and binding strength for the complexes formed by alkaline and alkaline earth metal cations, viz. Li⁺, Na⁺, K⁺, Be²⁺, Mg²⁺, and Ca²⁺ (Mⁿ⁺, hereinafter), with 2‐(3′‐hydroxy‐2′‐pyridyl)benzoxazole. A total of 60 initial structures were designed and optimized, of which 51 optimized structures were found, which could be divided into two different types: monodentate complexes and bidentate complexes. In the cation‐heteroatom complex, bidentate binding is generally stronger than monodentate binding, and of which the bidentate binding with five‐membered ring structure has the strongest interaction. Energy decomposition revealed that the total binding energies mainly come from electrostatic interaction for alkaline metal ion complexes and orbital interaction energy for alkaline earth metal ion complex. In addition, the electron localization function analysis show that only the Be? O and Be? N bond are covalent character, and others are ionic character. © 2012 Wiley Periodicals, Inc.     

A study of reconstituted anion channels using lipid bilayers

A chloride channel from impermeant sarcoplasmic reticulum (SR) was embedded in a planar lipid bilayer (BLM) and its electrical properties determined. Studies using ER-derived vesicles fused with BLMs have shown that they are permeable to Na⁺, K⁺, choline and Cl⁻ but less permeable to Ca²⁺ and Mg²⁺. Though highly permeable to K⁺, the liver ER membrane has been postulated to a lack of an efficient ion-conducting structure for K⁺ channel in the SR. The present study was undertaken with the aim to look at the anionic, Ca²⁺ and K⁺ permeability pathways present in the ER membrane. Our reconstituted system exhibits considerable anionic permeability following the sequence: SCN⁻>I⁻>Br⁻Cl⁻>gluconate. The findings suggest the chloride channels have low field-strength sites. It can be pharmacologically dissected to Zn²⁺-sensitive and DIDS-sensitive types. The gating of the channel is weakly voltage-dependent and at higher positive or negative voltages the channel prefers the low sub-conductance states.     

Accurate molecular electrostatic potentials based on modified PRDDO/M wave functions: III. Extension of the PESP method for calculation of electrostatic potential-derived atomic charges to compounds containing Li+, Na+, Mg2+, K+, Ca2+, Zn2+, and I

The PESP (Parameterized ElectroStatic Potential) method for calculating molecular electrostatic potentials, previously parameterized for H, C, N, O, F, P, S, Cl, and Br, is extended to molecules containing Li⁺, Na⁺, Mg²⁺, K⁺, Ca²⁺, Zn²⁺, and I. For a collection of 166 molecules containing 1668 atoms with at least one metal or iodine atom, PESP achieves an average absolute deviation in electrostatic potential-derived atomic charges of 0.042e⁻ compared with ab initio MP2/6-31G** calculations, with a correlation coefficient of 0.996. For a larger data set, consisting of 311 molecules encompassing all of the 16 elements just listed (2488 total atoms), PESP achieves an average absolute deviation of 0.040e⁻ and a correlation coefficient of 0.995. PESP calculations are an order of magnitude faster than the simplest ab initio method (STO-3G) on large molecules, while achieving a level of accuracy that rivals much more elaborate ab initio methods. © 1998 John Wiley & Sons, Inc. J Comput Chem 19: 1456–1469, 1998     

Capillary ion electrophoresis-capacitively coupled contactless conductivity detection of inorganic cations in human saliva on a polyvinyl alcohol-coated capillary

Capillary ion electrophoresis–capacitively coupled contactless conductivity detection (CIE-C4D) with a polyvinyl alcohol chemically coated capillary (PVA capillary) was used to analyze inorganic cations (Na⁺, K⁺, NH₄⁺, Mg²⁺, and Ca²⁺) commonly found in human saliva. The PVA capillary, which was made by our laboratory, minimized electro-osmotic flow in the wide pH range of the background electrolyte (BGE), and the PVA layer adsorbed to capillary wall did not affect the conductimetric background level. In this study, we determined an optimized BGE of 30 mM lactic acid/histidine plus 3 mM 18-crown-6 for the CIE-C4D system using the PVA capillary, which could simultaneously improve the separation of Mg²⁺ and Ca²⁺ from Na⁺ and that of K⁺ from NH₄⁺. This system obtained highly reproducible separation of cations in human saliva samples within 8 min at 20 kV without deprotonation. The quantifiability of cations in human saliva samples on the CIE-C4D system was demonstrated through identification by ion chromatography with satisfactory results.     

Sensitivity and Selectivity of Polypyrrole Based AC‐Amperometric Sensors for Electroinactive Ions – Frequency and Applied Potential Influence

Oxidation/reduction of polypyrrole films coupled with ion exchange on the polymer/solution interface can be utilized for amperometric sensing of electroinactive ions. Anion or cation exchanging films (polypyrrole doped by chloride or poly(4‐styrenesulfonate) ions, respectively) can be used to determine common anions (as Cl^?, NO , SO etc) or cations (K⁺, Na⁺, Li⁺, Ca²⁺, Mg²⁺) under conditions of alternating current (AC) amperometry in the range 10^?4–1 M. A sensitivity can be tuned by choosing appropriate electrode potential, corresponding to polypyrrole oxidation (anion‐exchanging films) or reduction (cation‐exchangers). Electrochemical impedance spectroscopy and AC‐voltammetry studies have shown that applied frequency and potential could also affect the observed dependence of the signal (admittance or AC‐current) on ion concentration. For high frequency the sensitivity is higher but selectivity lower, due to influence of solution conductivity on the response. For low frequencies the sensitivity is lower; however, a selectivity increase was observed due to diverse mobility of ions in the polymer film. Selectivity of AC‐amperometric responses was studied both in separate and mixed solutions.     

Transport of Ca2+, Sr2+, Ba2+, Na+, K+ and Cs+ through hollow fiber supported liquid membrane

The transport of metal ions (Ca²⁺, Sr²⁺, Ba²⁺, Na⁺, K⁺, Cs⁺) through hollow fiber supported dichlorobenzene liquid membrane has been studied. The transport of cations using 8-crown-6 ether as a carrier and picrate as co-counter ion as well as a pertraction device and capillary isotachophoresis (ITP) measurement of the cation concentration is described.     

Progress of Organic Electrodes in Aqueous Electrolyte for Energy Storage and Conversion

Aqueous batteries using inorganic compounds as electrode materials are considered a promising solution for grid-scale energy storage, while wide application is limited by the short life and/or high cost of electrodes. Organics with carbonyl groups are being investigated as the alternative to inorganic electrode materials because they offer the advantages of tunable structures, renewability, and they are environmentally benign. Furthermore, the wide internal space of such organic materials enables flexible storage of various charged ions (for example, H⁺, Li⁺, Na⁺, K⁺, Zn²⁺, Mg²⁺, and Ca²⁺, and so on). We offer a comprehensive overview of the progress of organics containing carbonyls for energy storage and conversion in aqueous electrolytes, including applications in aqueous batteries as solid-state electrodes, in flow batteries as soluble redox species, and in water electrolysis as redox buffer electrodes. The advantages of organic electrodes are summarized, with a discussion of the challenges remaining for their practical application.     

Determination of calcium and total hardness in natural waters using a potentiometric sensor array

The determination of calcium and total hardness in natural waters is carried out with a potentiometric sensor array which consists of a series of ion-selective electrodes (ISEs) for Ca²⁺, Mg²⁺, NH₄⁺, K⁺, Na⁺, Li⁺, and H⁺. The selectivity of the calcium and magnesium ISEs is not fully achieved as other cation species may interfere with the analysis. The proposed sensor array device can overcome this drawback since it can take advantage of the cross-selectivities of cation species towards each ISE. In this approach, the multivariate data generated by the sensor array results in a richer source of analytical information which allows the quantification of calcium and total hardness in the water samples by means of chemometric methods. Results obtained are in reasonable concordance with those given by the standard method based on complexometry.     

Paper‐Based Electronic Tongue

We present a low cost paper‐based electronic tongue capable of discriminating forged water samples. System comprises of 4 paper‐based potentiometric sensors (sensitive to Cl^?, Na⁺/K⁺, Ca²⁺/Mg²⁺, ) and a traditional Ag/AgCl reference electrode. Different electrode materials and methods of insulation were tested with best results obtained for pencil graphite and lamination. The presented electronic tongue was able to distinguish tap and lake water from mineral water samples (PCA – Principal Component Analysis and KNN ? K‐nearest neighbour). In total 14 different water samples were used in this study. Sensors presented good signal repeatability, selectivity and reasonable sensitivity.     

Guanidinium-selective PVC membrane electrodes based on crown ethers

Guanidinium-selective membrane electrodes were constructed with dibenzo-24-crown-8, dibenzo-27-crown-9, tribenzo-27-crown-9 or dibenzo-30-crown-10. The detection limits and selectivity coefficients towards different interfering ions, such as Li⁺, Na⁺, K⁺, NH⁺₄, Mg²⁺ and Ca²⁺ were determined. The electrode with dibenzo-27-crown-9 shows linear response over the range 10^?1–10^?4 M, with selectivity coefficients about 10^?2 for most alkali and alkaline earth metal ions.     

Interaction energies of histidine with cations (H<Superscript>+</Superscript>, Li<Superscript>+</Superscript>, Na<Superscript>+</Superscript>, K<Superscript>+</Superscript>, Mg<Superscript>2+</Superscript>, Ca<Superscript>2+</Superscript>)

The imidazol side group of histidine has two nitrogen atoms capable of being protonated or participating in metal binding. Hence, histidine can take on various metal-bound and protonated forms in proteins. Because of its variable structural state, histidine often functions as a key amino acid residue in enzymatic reactions. Ab initio (HF and MP2) calculations were done in modeling the cation (H⁺, Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺) interaction with side chain of histidine. The region selectivity of metal ion complexation is controlled by the affinity of the side of attack. In the imidazol unite of histidine the ring nitrogen has much higher metal ion (as well as proton) affinity. The complexation energies with the model systems decrease in the following order: Mg²⁺ > Ca²⁺ > Li⁺ > Na⁺ > K⁺. The variation of the bond lengths and the extent of charge transfer upon complexation correlate well with the computed interaction energies.     

Sulfonated poly(ether ether ketone) as an alternative charged material to poly(vinyl chloride) in the design of ion-selective electrodes

To date, poly(vinyl chloride) (PVC) is the most used polymer in the design of ion selective electrode (ISE) membranes. This paper is focused on the use of sulfonated poly(ether ether ketone) (SPEEK) as an alternative material to PVC for the design of ISEs. SPEEK of the desired degree of sulfonation is synthesized from poly(ether ether ketone) (PEEK). An NH₄⁺-ISE has been chosen as a model electrode to study the efficiency of SPEEK as polymer matrix of the membrane. The material was evaluated in ionophore free ion exchanger membranes as well as in ion-selective electrodes membranes containing nonactine as ionophore. Analytical performance parameters of the prepared electrodes were evaluated. The electrodes show a slope between 50 and 60 mV dec⁻¹ depending on both the calibration medium and the membrane composition. A linear range of response between 10⁻⁴ and 1.0 M and a lifetime of 1-2 months were obtained. The interferences of cations such us Ca²⁺, Na⁺, Li⁺ and K⁺ over the prepared ISEs are studied as well. Although the plasticizer in the SPEEK based membrane matrix is not necessary, its presence improves the sensibility. This makes SPEEK a good potential choice over alternative membrane matrices reported in the literature and a promising platform for the establishment of membrane components.