General Preparation of Heme Protein Functional Fe3O4@Au‐Nps Magnetic Nanocomposite for Sensitive Detection of Hydrogen Peroxide

Stable magnetic nanocomposite of gold nanoparticles (Au‐NPs) decorating Fe₃O₄ core was successfully synthesized by the linker of Boc‐L‐cysteine. Transmission electron microscope (TEM), energy dispersive X‐ray spectroscopy (EDX) and cyclic voltammograms (CV) were performed to characterize the as‐prepared Fe₃O₄@Au‐Nps. The results indicated that Au‐Nps dispersed homogeneously around Fe₃O₄ with the ratio of Au to Fe₃O₄ nanoparticles as 5–10/1 and the apparent electrochemical area as 0.121 cm². After self‐assembly of hemoglobin (Hb) on Fe₃O₄@Au‐Nps by electrostatic interaction, a hydrogen peroxide biosensor was developed. The Fe₃O₄@Au‐Nps/Hb modified GCE exhibited fast direct electron transfer between heme center and electrode surface with the heterogeneous electron transfer rate constant (Ks ) of 3.35 s⁻¹. Importantly, it showed excellent electrocatalytic activity towards hydrogen peroxide reduction with low detection limit of 0.133 μM (S /D =3) and high sensitivity of 0.163 μA μM⁻¹, respectively. At the concentration evaluated, the interfering species of glucose, dopamine, uric acid and ascorbic acid did not affect the determination of hydrogen peroxide. These results demonstrated that the introduction of Au‐Nps on Fe₃O₄ not only stabilized the immobilized enzyme but also provided large surface area, fast electron transfer and excellent biocompatibility. This facile nanoassembly protocol can be extended to immobilize various enzymes, proteins and biomolecules to develop robust biosensors.     

Individual and Simultaneous Voltammetric Determination of Cd(II), Cu(II) and Pb(II) Applying Amino Functionalized Fe3O4@Carbon Microspheres Modified Electrode

Amino‐functionalized Fe₃O₄@carbon microspheres (NH₂?Fe₃O₄@C) were prepared and the electrochemical sensor was constructed using NH₂?Fe₃O₄@C modified glassy carbon electrodes (GCE) to determine toxic heavy metals in aqueous solution. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) were used to characterize the structure and phase of NH₂?Fe₃O₄@C. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) results indicate that NH₂?Fe₃O₄@C modified GCE possesses large active area and excellent electron transfer. Under optimized electrochemical condition, Cd(II), Pb(II) and Cu(II) were determined using NH₂?Fe₃O₄@C modified GCE. The electrode through amino functionalization exhibits higher sensitivity and lower detection limit toward Cd(II) and Cu(II) due to the acid‐base pairing interaction between the electron‐rich ?NH₂ ligand and the electron‐deficient heavy metal ions. Compared with other similar results reported in the literature, the NH₂?Fe₃O₄@C modified electrode exhibits wider linear response range while with comparable lower detection limit. It also exhibits excellent stability, reproducibility and anti‐interference ability.     

Magnetic Solid Base Catalyst Fe3O4@Gly Used as Acid‐Resistant Catalyst for Biodiesel Production

Fe₃O₄@Gly nanoparticles were synthetized by coprecipitation and studied in the transesterification of soybean oil and methanol to determine its performance for biodiesel synthesis. The magnetism and catalytic performance of Fe₃O₄@Gly alkaline catalyst were investigated in detail. With a catalyst dosage 1.5 wt %, methanol/soybean oil ratio of 15:1, reaction temperature of 65 °C, and a reaction time of 3 h, the highest yield of biodiesel was 95.8%. The strong base catalyst CaO was used as comparison, from which it was seen that Fe₃O₄@Gly was more hydrophobic than the former. Moreover, because of the complete dissolution of oleic acid in methanol, Fe₃O₄@Gly could make better contact with oleic acid, which made it perform far better than pure CaO in oleic acid. In addition, after four times recycling, the yield of biodiesel was still 86.6%. The results show that Fe₃O₄@Gly possesses excellent properties of acid resistance and recyclability. The catalyst can be a high‐efficiency alkaline heterogeneous catalyst for biodiesel production.     

单分散Fe3O4纳米颗粒的控制合成和表征

以十八烯为溶剂、乙酰丙酮铁为铁源,并在油酸、油胺的辅助作用下,通过热分解法成功合成了单分散Fe3O4纳米颗粒。讨论了实验参数如反应温度、表面活性剂的量和种类、溶剂、油酸、油胺对单分散Fe3O4纳米颗粒的尺寸及形貌的影响。利用X射线衍射（XRD）、透射电子显微镜（TEM）、选区电子衍射（SAED）和高分辨透射电子显微镜（HRTEM）对所得产物的物相、结构、尺寸和形貌进行了表征分析。通过振动样品磁强计（VSM）表征产物磁性能,表明在室温下,Fe3O4纳米颗粒的饱和磁化强度（Ms）和矫顽力（Hc）分别为74.0 emu/g,72.6 Oe。     

Waste to wealth: conversion of nano‐magnetic eggshell (Fe3O4@Eggshell) to Fe3O4@Ca(HSO4)2: cheap,green and environment‐friendly solid acid catalyst

Eggshell is a hazardous waste by European Union regulations, so that discarded thousands of tons per year. To convert waste (eggshell) to wealth (catalyst), nano‐magnetic eggshell was prepared based on the nano‐Fe₃O₄, and then the eggshell was converted to Ca(HSO₄)₂ with organic acid, namely, chlorosulfonic acid. Based on the back titration, 5.18 mmol SO₄H group was loaded per gram of the nano‐structure. Using this method eggshell was converted to cheap, green and environment‐friendly solid acid catalyst. The prepared catalyst (nano‐ Fe₃O₄@Ca(HSO₄)₂) was characterized by Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), energy dispersive X‐ray spectroscopy (EDX), field emission scanning electron microscopy (FE‐SEM), transmission electron microscopy (TEM), vibrating sample magnetometer (VSM), and thermal gravimetric analysis (TGA). The activity of eggshell waste‐derived catalysts was successfully evaluated in the synthesis of value‐added products, namely indazolo[1,2‐b]‐phthalazinetrione derivatives as a benchmark multicomponent reaction. In addition, design of experiments shows that increase in amount of catalyst (and temperature), boost the reaction yield, especially with steeper slope at higher temperature.     

A Novel Biomimetic Hydrogen Peroxide Biosensor Based on Pt Flowers‐decorated Fe3O4/Graphene Nanocomposite

A sensitive and selective amperometric H₂O₂ biosensor was obtained by utilizing the electrodeposition of Pt flowers on iron oxide‐reduced graphene oxide (Fe₃O₄/rGO) nanocomposite modified glassy carbon electrode (GCE). The morphology of Fe₃O₄/rGO and Pt/Fe₃O₄/rGO was characterized by transmission electron microscopy (TEM) and scanning electron microscopy (SEM), respectively. The step‐wise modification and the electrochemical characteristics of the resulting biosensor were characterized by cyclic voltammetry (CV) and chronoamperometry methods. Thanks to the fast electron transfer at the Pt/Fe₃O₄/rGO electrode interface, the developed biosensor exhibits a fast and linear amperometric response upon H₂O₂. The linear range of Pt/Fe₃O₄/rGO is 0.1∼2.4 mM (R²=0.998), with a sensitivity of 6.875 μA/mM and a detection limit of 1.58 μM (S/N=3). In addition, the prepared biosensor also provides good anti‐interferent ability and long‐term stability due to the favorable biocompatibility of the electrode interface. The proposed sensor will become a reliable and effective tool for monitoring and sensing the H₂O₂ in complicate environment.     

Preparation and characterization of palladium immobilized on silica‐coated Fe3O4 and its catalytic performance for Suzuki reaction under microwave irradiation

Supported palladium catalyst (Pd/Fe₃O₄@SiO₂) was easily prepared by supporting PdCl₂ on silica‐coated magnetic nanoparticles Fe₃O₄ in ethylene glycol. The as‐prepared sample was characterized by infrared spectroscopy (IR), X‐ray diffraction (XRD) and X‐ray photoelectron spectrometer (XPS). The formation of active specie Pd(0) was confirmed by XRD and XPS, and the Pd loading for the fresh and recovered catalyst was determined by atomic absorption spectroscopy (AAS). Pd/Fe₃O₄@SiO₂ was employed for the synthesis of biphenyl derivatives via Suzuki reaction. In terms of the yield of biphenyl, the supported catalyst displayed nearly equal catalytic performance to that of homologous PdCl₂ under microwave irradiation for 30 min but higher than that obtained by traditional heating method for 12 h. The catalytic performance of Pd/Fe₃O₄@SiO₂ for Suzuki reactions involving various aryl halides and arylboronic acids were also examined. Impressive yield of biphenyl at 68.2% was obtained even in the presence of unreactive aryl chlorides. Pd/Fe₃O₄@SiO₂ was recovered by a permanent magnet and directly reused in the next run, and no obvious deactivation was observed for up to 6 times. Copyright © 2016 John Wiley & Sons, Ltd.     

Ni@Pd core–shell nanoparticles immobilized on yolk–shell Fe3O4@polyaniline composites as a highly efficient,magnetically separable and atom‐economical catalyst for reduction of nitrobenzenes

The preparation of Ni@Pd core–shell nanoparticles immobilized on yolk–shell Fe₃O₄@polyaniline composites is reported. Fe₃O₄ nanoclusters were first synthesized through the solvothermal method and then the SiO₂ shell was coated on the Fe₃O₄ surface via a sol–gel process. To prepare Fe₃O₄@SiO₂@polyaniline composites, polyvinylpyrrolidone was first grafted on to the surface of Fe₃O₄@SiO₂ composites and subsequently polymerization of aniline was carried out via an ultrasound‐assisted in situ surface polymerization method. Selective etching of the middle SiO₂ layer was then accomplished to obtain the yolk–shell Fe₃O₄@polyaniline composites. The approach uses polyaniline (PANI) conductive polymer as a template for the synthesis of Ni@Pd core–shell nanoparticles. The catalytic activity of the synthesized yolk–shell Fe₃O₄@PANI/Ni@Pd composite was investigated in the reduction of o‐nitroaniline to benzenediamine by NaBH₄, which exhibited conversion of 99% in 3 min with a very low content of the catalyst. Transmission electron microscopy, X‐ray photoelectron spectroscopy, TGA, X‐ray diffraction, UV–visible, scanning electron microscopy, X‐ray energy dispersion spectroscopy and FT‐IR were employed to characterize the synthesized nanocatalyst. Copyright © 2014 John Wiley & Sons, Ltd.     

Magnetically recyclable palladium nanoparticles (Fe3O4‐Pd) for oxidative coupling between amides and olefins at room temperature

A convenient method for the synthesis of magnetically recyclable palladium nanoparticles (Fe₃O₄‐Pd) is described. The catalytic application of the Fe₃O₄‐Pd nanoparticles was explored for the first time in oxidative coupling between amides and olefins. p‐Toluenesulfonic acid plays a significant role in the oxidative amidation reaction. The reaction proceeds at room temperature, resulting in (Z)‐enamides under ambient air in the absence of co‐catalyst and ligand. The superparamagnetic nature of Fe₃O₄‐Pd facilitates easy, quantitative recovery of the catalyst from a reaction mixture, and it can be reused for up to three consecutive cycles with a slight decrease in catalytic activity.     

Synthesis,characterization, and catalytic application of Fe3O4‐Si‐[CH2]3‐N=CH‐aryl for the efficient synthesis of novel poly‐substituted pyridines

Fe₃O₄ magnetic nanoparticles (MNPs) were functionalized by aminopropylsilane and reacted with aromatic aldehyde, and Fe₃O₄‐Si‐[CH₂]₃‐N=CH‐Aryl and Fe₃O₄‐Si‐(CH₂)₃‐NH‐CH₂‐Aryl MNPs were prepared as novel magnetic nanocatalysts. Fourier transform infrared (FT‐IR), X‐ray diffraction (XRD), and scanning and transmission electron microscopy (SEM and TEM) were used to identify the MNPs. The catalytic activity of the MNPs was evaluated in the one‐pot synthesis of some novel poly‐substituted pyridine derivatives.     

A Sensitive Electrochemical Sensor Based on Graphene Oxide Nanosheets Decorated by Fe3O4@Au Nanostructure Stabilized on Polypyrrole for Efficient Triclosan Sensing

Triclosan is broadly utilized as preservative or antiseptic in various cosmetic and personal care products. It becomes hazardous for environmental safety and human health more than a certain concentration. In this research, graphene oxide (GO) nanosheets were prepared by composing Fe₃O₄@Au nanostructure decorated GO together with polypyrrole (PPy) (Fe₃O₄@Au‐PPy/GO nanocomposite) in a facile way. The composite excellent increased the electrochemical response, presenting a high sensitive electrochemical method for triclosan detection. The synthesized Fe₃O₄@Au‐PPy/GO nanocomposite was characterized for its morphological, magnetically and structural properties by FESEM‐mapping, TEM, and XRD. The Fe₃O₄@Au‐PPy/GO nanocomposites modified glassy carbon electrodes (GCE), Fe₃O₄@Au‐PPy/GO GCE, showed a higher sensitivity good stability, reproducibility, lower LOD (2.5×10^?9 M) and potential practical application in electrochemical detection of triclosan under optimized experimental conditions.     

Synthesis and characterization of bromine source supported on magnetic Fe3O4 nanoparticles: A new,versatile and efficient magnetically separable catalyst for organic synthesis

Tribenzylammonium tribromide supported onto magnetic nanoparticles (Br₃‐TBA‐Fe₃O₄) as a bromine source was successfully synthesized and characterized using Fourier transform infrared spectroscopy, thermogravimetric analysis, X‐ray diffraction, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy and vibrating sample magnetometry. The synthesized catalyst is shown to be a versatile and highly efficient heterogeneous catalyst for the Knoevenagel condensation and synthesis of 2,3‐dihydroquinazolin‐4(1H )‐one and polyhydroquinoline derivatives. To the best of the authors' knowledge, this is the first report of the use of a bromine source immobilized on Fe₃O₄ nanoparticles as a magnetically separable catalyst for these reactions. The nanosolid catalyst can be magnetically recovered and reused readily several times without significant loss in catalytic efficiency.     

Ni(II)‐Adenine complex coated Fe3O4 nanoparticles as high reusable nanocatalyst for the synthesis of polyhydroquinoline derivatives and oxidation reactions

In the present study, Fe₃O₄ nanoparticles were prepared via simple and versatile procedure. Then, a novel and green catalyst was synthesized by the immobilization of Ni on Fe₃O₄ nanoparticles coated with adenine. The activity of this nanostructure compound was examined for the oxidation of sulfides, oxidative coupling of thiols and synthesis of polyhydroquinolines. The prepared catalyst was characterized by Fourier transform infrared spectroscopy (FT‐IR), scanning electron microscopy (SEM), energy‐dispersive X‐ray spectroscopy (EDS), inductively coupled plasma optical emission spectroscopy (ICP‐OES), X‐ray Diffraction (XRD), thermal gravimetric analysis (TGA), and vibrating sample magnetometer (VSM) measurements. This organometallic catalyst was recovered by the assistance of an external magnetic field from the reaction mixture and reused for seven continuous cycles without noticeable change in its catalytic activity.     

Fabrication of Fe3O4@SiO2 nanocomposites to enhance anticorrosion performance of epoxy coatings

SiO₂‐coated Fe₃O₄ (Fe₃O₄@SiO₂) nanocomposites were prepared by sol–gel method, and the anticorrosion performance of composite coatings was discussed. The structure of the Fe₃O₄@SiO₂ nanocomposites was verified through Fourier transform infrared, X‐ray diffraction, and scanning electron microscopy. Composite epoxy coatings with same concentrations of Fe₃O₄ and Fe₃O₄@SiO₂ were measured by scanning electron microscopy contact angle meter. More importantly, the Fe₃O₄@SiO₂ nanocomposites not only obtained a homogeneous dispersion and compatibility in epoxy resin but also exhibited an obvious superiority in enhancing the anticorrosion performance of epoxy coatings. Furthermore, the anticorrosion mechanism of Fe₃O₄@SiO₂/epoxy composite coating was tentatively discussed. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis of Fe3O4 Microspheres-Supported Catalysts for Suzuki Coupling Reaction

Two new Fe₃O₄ microspheres‐supported semi‐homogeneous catalysts, namely Fe₃O₄‐G4‐polyaminoamido (PAMAM) dendrimers‐Pd(0) and Fe₃O₄‐polyethylene glycols (PEGs)‐Pd(0) were synthesized and characterized by X‐ray powder diffraction, infrared spectrum, scanning electron microscopy, transmission electron microscopy, X‐ray photoelectron spectroscopy and thermal gravimetric analysis, which can catalyze Suzuki coupling reactions. The performance of catalysts was tested for the reactions of aryl halides with phenyl boronic acid and compared with a heterogeneous catalyst Fe₃O₄‐(3‐aminopropyl)triethoxysilane (APTS)‐Pd(0), in which Fe₃O₄‐G4‐PAMAM dendrimers‐Pd(0) shows the best activity among the three catalysts. The order of the catalytic activities is Fe₃O₄‐G4‐PAMAM dendrimers‐Pd(0)>Fe₃O₄‐PEGs‐Pd(0)>Fe₃O₄‐APTS‐Pd(0). The catalysts can be quickly and completely recovered by simply applying a magnet of 105 mT and the efficiencies remain unaltered even after four recycles.     

The first urea‐based ionic liquid‐stabilized magnetic nanoparticles: an efficient catalyst for the synthesis of bis(indolyl)methanes and pyrano[2,3‐d]pyrimidinone derivatives

Urea‐based ionic liquid stabilized on silica‐coated Fe₃O₄ magnetic nanoparticles, {Fe₃O₄@SiO₂@(CH₂)₃‐Urea‐SO₃H/HCl}, as an unexceptionable and smooth releasing urea fertilizer in alkali soils was synthesized and fully characterized using Fourier transform infrared, UV–visible and energy‐dispersive X‐ray spectroscopies, X‐ray diffraction, scanning and transmission electron microscopies, atomic force microscopy and thermogravimetric analysis. The nanostructure catalyst as a novel, green and efficient catalyst was applied for the synthesis of bis(indolyl)methane derivatives via the condensation reaction between 2‐methylindole and aldehydes at room temperature under solvent‐free conditions. Also, pyrano[2,3‐d]pyrimidinone derivatives were prepared in the presence of the nanomagnetic urea‐based catalyst by the one‐pot three‐component condensation reaction of 1,3‐dimethylbarbituric acid, aldehydes and malononitrile under solvent‐free conditions at 60 °C. To the best of our knowledge, this is the first report of the synthesis of urea‐based ionic liquid stabilized on silica‐coated Fe₃O₄ magnetic nanoparticles. So the present work can open up a new and promising insight in the course of rational design, synthesis and applications of task‐specific fertilizer‐based nanomagnetic ionic liquids with desirable properties as unexceptionable substances for sustainable processes. Copyright © 2016 John Wiley & Sons, Ltd.     

Palladium immobilized on amidoxime‐functionalized magnetic Fe3O4 nanoparticles: a highly stable and efficient magnetically recoverable nanocatalyst for sonogashira coupling reaction

We describe the synthesis of a novel Fe₃O₄/amidoxime (AO)/Pd nanocatalyst by grafting of AO groups on Fe₃O₄ nanoparticles and subsequent deposition of Pd nanoparticles. Prior to grafting of AO, the 2‐cyanoethyl‐functionalized Fe₃O₄ nanoparticles prepared through combining 2‐cyanoethyltriethoxysilane and Fe₃O₄ were treated with hydroxylamine. The AO‐grafted Fe₃O₄ nanoparticles were then used as a platform for the deposition of Pd nanoparticles. The catalyst was characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, scanning and transmission electron microscopies, vibrating sample magnetometry, wavelength‐ and energy‐dispersive X‐ray spectroscopies and inductively coupled plasma analysis. Fe₃O₄/AO/Pd is novel phosphine‐free recyclable heterogeneous catalyst for Sonogashira reactions. Interestingly, the novel catalyst could be recovered in a facile manner from the reaction mixture by applying an external magnet device and recycled seven times without any significant loss in activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Magnetically recoverable AlFe/Te nanocomposite as a new catalyst for the facile esterification reaction under neat conditions

In this work, a new Fe₃O₄/AlFe/Te nanocomposite was synthesized by a one‐step sol–gel method. The Fe₃O₄ magnetic nanoparticles (MNPs) were prepared and then mixed with aluminum telluride (Al₂Te₃) in an alkali medium to produce the desired catalyst. After characterization of the Fe₃O₄/AlFe/Te nanocomposite by SEM, TEM, EDS, XRD, and ICP analyses, it was used in the esterification reaction. This heterogeneous catalyst showed high catalytic activity in the esterification of commercially available carboxylic acids with various alcohols to produce the desired esters at high conversions under neat conditions. The Fe₃O₄/AlFe/Te nanocomposites were separated from the reaction mixture via an external magnet and re‐used 8 times without significant loss of catalytic activity.     

Application of [Fe3O4@SiO2@(CH2)3Py]HSO4− as heterogeneous and recyclable nanocatalyst for synthesis of polyhydroquinoline derivatives

Four‐component condensation reaction of aromatic aldehydes, dimedone, ethyl acetoacetate and ammonium acetate in the presence of a catalytic amount of ionic liquid on silica‐coated Fe₃O₄ nanoparticles as a heterogeneous, recyclable and very efficient catalyst provided the corresponding polyhydroquinoline derivatives in good to excellent yields in ethanol under reflux condition. The [Fe₃O₄@SiO₂@(CH₂)₃Py]HSO₄^? catalyst was characterized using various techniques such as scanning electron microscopy, powder X‐ray diffraction, thermogravimetric analysis, vibrating sample magnetometry and Fourier transform infrared spectroscopy. Furthermore, the recovery and reuse of the catalyst were demonstrated seven times without detectable loss in activity.     

Magnetic carbon nanotube‐supported imidazolium cation‐based ionic liquid as a highly stable nanocatalyst for the synthesis of 2‐aminothiazoles

Magnetic carbon nanotube‐supported imidazolium ionic liquid (CNT‐Fe₃O₄‐IL) was synthesized and investigated using various characterization techniques, including Fourier transform infrared and Raman spectroscopies, X‐ray diffraction, vibrating sample magnetometry, scanning and transmission electron microscopies, and thermogravimetric and differential thermal analyses. In order to synthesize the CNT‐Fe₃O₄‐IL nanocomposites, Fe₃O₄‐decorated multi‐walled CNTs were modified with 1‐methyl‐3‐(3‐trimethoxysilylpropyl)‐1H‐imidazol‐3‐ium chloride. This catalytic system was found to be a highly stable, active, reusable and solid‐phase catalyst for the synthesis of 2‐aminothiazoles via the one‐pot reaction of ketone, thiourea and N‐bromosuccinimide under mild conditions. Immobilized magnetic ionic liquid catalysis combines the advantages of ionic liquid media with magnetic solid support nanomaterials which enables the application of nanotechnology and green chemistry in chemical processes. Copyright © 2016 John Wiley & Sons, Ltd.