Simulation investigation on waveguide properties of terahertz wave through subwavelength semiconductor gap

The waveguide propagation properties of terahertz wave through subwavelength semiconductor trench have been simulationally investigated. The effects of gap width, temperature, doping concentration and dielectric filling materials on waveguide property have been given and discussed. The results show that as temperature and doping concentration increases, the skin depth and the propagation constant decreases. In addition, the effective index increases and the propagation length decreases as the dielectric constant of filling materials increases.     

Simulation of the Propagation Property of Metal Wires Terahertz Waveguides

The propagation property of metal wires terahertz waveguides is studied and simulated under the framework of the Sommerfeld model. The group velocity dispersion, attenuation amplitude, transverse magnetic mode and propagating energy have been obtained by numerically solving the complex eigenvalue equation for the propagation constant. It is found that the group velocity dispersion and attenuation amplitude decrease with the increasing radii of metal wires. The energy power within the dielectric layer increase with the increase of radiation frequency.     

Investigation of the propagation properties of terahertz waves through a semiconductor subwavelength slit

The propagation properties of terahertz (THz) waves through semiconductor conductor-dielectric-conductor (CDC) structure have been investigated. The influence of geometrical parameters, radiation frequencies and temperatures on the propagation properties have been shown and discussed. The contour results demonstrate that as the length of the dielectric filling materials increase, the effective indices of the propagation modes increase. Compared with the results of the metal structure, the effective indices of surface modes through semiconductor InSb slits increase, the propagation length decrease. The effective indices of the surface modes decrease, the propagation lengths increase with the increasing of the carrier concentration. It is expected that the numerical results may be very helpful to have better understand the propagation mechanism of THz waves through semiconductor subwavelength slit.     

�ɵ�гһά��Ԫ�Ż�����������Ӿ�����������о�

在理想条件下,为了研究等离子体参数、填充率、入射角度和介质层相对介电常数对一维三元磁化等离子体光子晶体的禁带特性的影响,用由传输矩阵法计算得到的TE波任意角度入射时的左旋极化波(LCP)和右旋极化波(RCP)的透射系数来研究其禁带特性。结果表明,仅增加等离子体碰撞频率不能实现禁带宽度的拓展,改变等离子体频率、填充率和介质层的相对介电常数能实现对禁带宽度和数目的调谐。改变等离子体回旋频率能实现对右旋极化波的禁带的调谐,但对左旋极化波的禁带几乎无影响。入射角度的增大使得禁带低频区域带宽变大,而高频区域带宽则是将先减小再增大。     

Finite size effects on structure and magnetism in mass-selected CoPt nanoparticles

In this paper, the one-way absorption property in one-dimensional dielectric/metal photonic crystal structure with a dielectric defect layer is studied. The effects of incident angle and state of polarization on one-way absorption behaviour of the anti-resonant (AR) mode are investigated. The normally incident wave from left to right propagation is totally allowed to penetrate to the structure but right to left propagation totally reflected at the same wavelength. It is found that, with increasing of the incident angle, the AR mode shifts to the lower wavelengths and its intensity decreases. Simultaneously, another AR mode with reversed one-way property appears at higher wavelength. The one-way behaviour on absorption is observed at the both states of polarizations but is localized on different wavelengths. Those effects, are suggesting that the proposed structure can be used as a direction sense polarization splitter or reflector/antireflector device.     

银纳米线表面等离激元波导的能量损耗

金属纳米结构的表面等离激元可以突破光学衍射极限,为光子器件的微型化和集成光学芯片的实现奠定基础.基于表面等离激元的各种基本光学元件已经研制出来.然而,由于金属结构的固有欧姆损耗以及向衬底的辐射损耗等,表面等离激元的传输能量损耗较大,极大地制约了其在纳米光子器件和回路中的应用.研究能量损耗的影响因素以及如何有效降低能量损耗对未来光子器件的实际应用具有重要意义.本文从纳米线表面等离激元的基本模式出发,介绍了它在不同条件下的场分布和传输特性,在此基础上着重讨论纳米线表面等离激元传输损耗的影响因素和测量方法以及目前常用的降低传输损耗的思路.最后给出总结以及如何进一步降低能量损耗方法的展望.表面等离激元能量损耗的相关研究对于纳米光子器件的设计和集成光子回路的构建有着重要作用.     

Directional couplers in trapped image guide configuration

Dispersion characteristics and wave impedance of trapped coupled image guides are computed by using mode matching techniques. Dispersion curves for trapped coupled image guide are plotted for various dielectric materials and dimensional parameters. The hybrid directional couplers in the above configuration have been theoretically designed by computing the normalization propagation constant.     

Terahertz demonstrations of effectively two-dimensional photonic bandgap structures

We demonstrate effectively two-dimensional (2D) terahertz (THz) photonic bandgap (PBG) structures for transverse electromagnetic (TEM) mode propagation within metal parallel plate waveguides (PPWG). The 2D-PBG structures consisting of square arrays of dielectric cylinders were characterized by THz time-domain spectroscopy (THz-TDS). THz photonic bandgaps were observed, as determined by the 160 mum lattice constant, the 65 mum diameter, and the dielectric constant of the cylinders. The experimental measurements were fitted with excellent agreement to 2D theory, confirming that for TEM mode propagation, effectively 2D propagation experiments can be achieved within the bounded space of the PPWG.     

紫外表面等离激元在基于氧化锌纳米线的半导体-绝缘介质-金属结构中的输运特性研究

研究了紫外表面等离激元在半导体纳米线-绝缘介质-金属构成的波导结构中的输运问题,借助有限元方法,对这种波导所支持导模的电磁能分布、有效折射率、传播长度和有效模场面积随电磁参数和几何结构参数的依赖关系进行了分析.计算结果表明:以氧化锌纳米线作为增益介质,绝缘材料选择折射率小的空气,金属选择铝能够实现对输出光场的亚波长约束,有效模场面积达到λ2/100,同时保持低的传输损耗和高场强限制能力;有望用作纳米光源,使得相关的生物探测器件和医疗诊断设备实现更高的灵敏度和更小的体积.     

Zero permittivity band characteristics in one-dimensional plasma dielectric photonic crystal

We consider the oblique propagation of electromagnetic waves in one-dimensional plasma dielectric photonic crystals, the superlattice structure consisting of alternating plasma and dielectric materials using transfer matrix method. Our results show that photonic band gaps for all polarizations can be obtained in one-dimensional plasma dielectric photonic crystals. These structures can exhibit a new type of band or gap, for the incidence angles other than normal incidence, near frequencies where the electric permittivity of the plasma layer changes sign. This new band or gap arises, from the dispersive properties of the plasma layer, only for TM polarized waves and its width increases with the increasing angle of incidence. This differential behaviour under polarization can be utilized in the design of an efficient polarization splitter. The band characteristic is affected by the plasma width, the plasma density, dielectric width, the dielectric constant of the dielectric medium and angle of incidence.     

Transmission characteristics of a microscale dielectric slab waveguide device with a deep groove and an embedded metallodielectric grating at low terahertz frequency

We discuss the transmission characteristics of a microscale dielectric waveguide device with a deep groove and an embedded metallodielectric grating illuminated by a continuous wave of TM and TE modes at low terahertz frequency. To study its performance we solve numerically the corresponding Maxwell equations by means of finite difference time domain method with uniaxial perfectly match layer as its boundary condition. By varying the angle of incident, grating filling factor and refractive index of analyte in the deep groove, it is found that the device exhibits a significant transmission enhancement for the TM mode due to the existence of surface plasmon interaction. We also demonstrate its potential application as a biosensor device.     

Resonantly enhanced transmission of light through subwavelength apertures with dielectric filling

Using both analytical and numerical methods to study transmission of light through dielectric-filled subwavelength apertures in a real metal, we have found that a propagating mode can in principle exist inside a waveguide of arbitrary small size if a particular relationship between the dielectric constants of the cladding and filling materials at the incident frequency is satisfied. Practical transmission through a subwavelength aperture of finite depth can be enhanced when the depth is such that Fabry-Pérot-like resonances are excited. For 810 nm light incident on a silicon-filled 50-nm-diameter aperture in a 200-nm-thick gold film, we found that a normalized near-field intensity ratio of 1.6 at the exit can be achieved. This resonantly enhanced transmission phenomenon may be advantageously applicable to near-field scanning optical microscopy and single-molecule spectroscopy.     

亚波长尺度下混合等离子泄漏模式激光

由于光存在衍射极限,因此传统方法不能实现亚波长尺度下的激光激射.为了打破这一衍射极限,本文设计了金属-介电层-半导体堆叠结构来实现深亚波长尺度下的激光激射,并讨论了相关结构对模式传播的影响.结构设计上,采用低介电常数金属银作为衬底、10?nm厚的LiF作为介电层、具有六边形截面的半导体纳米线ZnO作为高介电常数层,采用...     

Metal wave-guide to dielectric image guide transition using exponential taper

A unique metal wave guide to dielectric image guide transition has been developed using exponential taper in dielectric wave guide. The propagation characteristics have been computed theoretically and taper impedance for the different cross-sections have been evaluated, so as to match it with the metal wave guide for efficient mode conversion. Transmission loss and return loss for triangular and exponentail taper with frequency for same dimensional parameters have been measured.     

一种介质-金属加载圆孔单元厚屏频率选择表面

厚屏频率选择表面能较好地改善FSS带宽性能,是实现隐身雷达天线罩的有效手段.为了全面掌握厚屏FSS的传输特性,给FSS的工程应用提供可靠依据,本文设计了一种介质-金属加载圆孔单元的厚屏频率选择表面.采用矩量法对此结构进行分析计算,主要研究了加载金属直径、加载介质厚度、电磁波入射角等几个参数对厚屏FSS传输特性的影响规律.仿真实验结果表明:带宽、中心频率及其透过率都对填充介质直径、加载金属直径、加载介质厚度、电磁波入射角和不同排列方式有不同程度的敏感性,可以通过合理调整加载金属直径及加载介质厚度来获得较宽的通带和较高的透过率.这为实现厚屏FSS在曲面隐身雷达天线罩上的应用提供了一种有价值的借鉴.     

体布拉格光栅形变对高斯光束质量平方因子的影响

考虑热效应导致的体光栅表面形变引起体光栅背景折射率和周期的变化,进而引起体光栅介质介电常数的改变,对体光栅中传输的激光束特性的影响进行了研究。采用有限差分和稀疏矩阵的方法,对激光在有变形的体布拉格光栅中传输的波动方程进行数值迭代求解,并对激光束通过有形变的反射式体布拉格光栅后的功率反射比、光束束腰宽度、远场发散角和质量平方因子的变化进行了定量分析。结果表明,随着体光栅表面形变的增大,体光栅的功率反射比明显减小,输出光束的束宽、远场发散角和质量平方因子明显增大。     

Characteristics analysis of hybrid plasmonic waveguide for low-loss lightwave guiding

It has been experimentally demonstrated that a low-loss guided hybrid mode is supported if a metal strip is embedded in a low index polymer layer surrounded by two high index slabs. In this paper, further numerical analyses on the guided hybrid modes are reported to fully elucidate the characteristics of the hybrid plasmonic waveguide. For a one-dimensional slab structure with a metal film of infinite width, simulation results exhibit that low-loss guided hybrid modes are associated with surface plasmon modes and dual dielectric slab modes. The optical properties of the guided modes are improved by increasing the field intensity which is confined into lossless dielectric layers by decreasing the metal film thickness and increasing the refractive index and thickness of the high-index slabs. The finite element method is used to investigate the lateral mode confinement of the optical guided modes by the corresponding metal strip. By reducing the metal film width, the guided modes are confined in the plane transverse to the direction of propagation and the characteristics are significantly improved. The hybrid plasmonic waveguide can be exploited for long-range propagation-based application such as optical interconnection.     

Investigation into the Effect of Dielectric Loss on RF Characteristics of Helical SWS

A general theory has been developed to account for the effect of the dielectric loss of discrete rods on the performance characteristics of an actual helical slow wave structure (SWS). The effect of the lossy dielectric rods has been studied on various propagation parameters, namely, phase propagation constant, interaction impedance and attenuation constant at different operating frequency. It is clearly shown that the influence of dielectric loss on RF characteristics is much larger at the millimeter frequency band than that at the microwave frequency band, especially on interaction impedance and attenuation constant. The general theory developed here has been further confirmed by comparing the results with those obtained elsewhere for some special cases.     

LEAKY CHARACTERISTICS OF A NEW MILLIMETER WAVE ANTENNA BASED ON GROOVE GUIDE WITH AN ASYMMETRIC CONDUCTOR STRIP

A new millimeter wave leaky wave antenna is presented in this paper, which is a modification of the groove guide with an asymmetric conductor strip by introducing a dielectric slab into the conductor plane region of the groove guide antenna. The leakage property of the new antenna is carefully examined through calculations of an equivalent network, which is developed here with taking into account the coupling between different modes to guarantee the calculating accuracy. It has been found that the new leaky wave antenna is of larger leakage constant than that for the original groove guide antenna because of the introduction of the dielectric slab. Extensive numerical results of the leakage characteristics are given to establish useful guidelines for the design of the new type groove guide leaky wave antenna.     

亚波长金属偏振分束光栅设计分析

结合有效介质理论和薄膜光学的抗反射设计方法,设计了基于0.65μm工作波长的亚波长金属偏振分束光栅,给出了光栅的优化设计参数,采用严格耦合波理论分析了光栅的偏振分束特性.结果表明,亚波长金属光栅对TE偏振表现为金属膜特性,具有高反射,对TM偏振表现为介质膜特性,具有高透射,在-30°<θ<30°的大入射角范围和0.47μm<λ<0.80μm的宽入射波谱内,该光栅的透射光和反射光均具有高偏振消光比和低插入损耗的特点. 关键词： 亚波长金属偏振分束光栅 有效介质理论 薄膜光学 严格耦合波理论