金纳米粒子-荧光素体系的光谱特性

纳米粒子具有量子尺寸效应和表面效应等许多特有的性质 [1] ,在光吸收、医药及新材料等方面具有广阔的应用前景 .纳米粒子具有较高的比表面能且带有电荷 ,当光子与其接近时 ,实际上是光子与纳米粒子的界面电子发生了作用 [2 ,3 ] .基于此建立的共振散射 (RS)光谱技术已成为一种高灵敏度和高选择性的分析技术 ,是研究生物化学和液相纳米粒子特性的良好手段 [4～ 9] .我们 [2 ,3 ] 研究发现 ,较大粒径纳米粒子和界面的形成是导致散射光增强的根本原因 ;金、银等液相纳米粒子产生 RS效应和 RS峰等 .荧光猝灭 (FQ)效应已用于分析化学和蛋白…     

纳米尺度分散的TiO2光催化降解甲醛的机理

纳米TiO2具有小尺寸效应,表面效应和宏观量子隧道效应等[1],广泛用于防水处理、空气净化、抗菌防霉等方面。本文对其能带结构及其消除甲醛的性能及机理进行分析。1　纳米TiO2光催化剂1 1　制备与表征以四氯化钛为主要原料,氨水、醇类化合物、盐酸等为主要反应助剂,采用亚稳态氯化法制备工艺,用相应的溶胶反应形成溶胶液体,低于100℃加热该液体,除去多余的水分,得到溶胶-凝胶体。过滤所得溶胶-凝胶体,并用蒸馏水反复洗涤数次,使其pH呈中性。将洗涤后的溶胶-凝胶体进行真空干燥,得到白色微粉,1000℃高温煅烧,将煅烧后得到的纳米TiO2基…     

某些有机物在氧化物载体表面的自发单层分散

自发单层分散原理已在载负型催化剂制备、再生等方面得到越来越广泛的应用[1，2]．许多氧化物和盐类可以在载体表面形成单层分散或亚单层分散．有些分散物与载体混合后在低于其熔点的温度下处理，就可以自发分散到载体表面[1，3]．这一现象通过XRD、LRS、XPS、SIMS、ISS、EXAFS     

纳米银的电化学合成

纳米颗粒因具有量子尺寸效应、表面效应和宏观量子隧道效应等不同于晶态体材料和单个分子的固有特性 ,显示出体材料不具备的导电特性、光电特性、光催化能力及随粒径变化的吸收或发射光谱 ,已被用于各种发光与显示装置[1] .其制备的化学方法主要有溶胶 -凝胶法、微乳法、化学沉淀法和醇解法等 [2 ] .近年来 ,新发展出一种电化学合成纳米粒子的方法 ,如 Braun等 [3]利用 DNA模板电化学合成了银纳米线 ,Yu等[4 ] 用电化学合成了金纳米棒 ,Zhu等[5] 利用超声电化学合成了半导体 Pb Se纳米粒子 ,Amigo等 [6 ]用电化学方法合成了 Fe-Sr氧化…     

纳米银掺杂二氧化硅复合颗粒的制备及表征

0引言金属纳米颗粒因其粒子尺寸小(1￣100nm),比表面积大,表面原子数多,表面能和表面张力随粒径的下降急剧增大而具有量子尺寸效应[1]、小尺寸效应[2]、表面效应[3]及宏观量子隧道效应[4]等,从而出现了不同于常规固体的新奇特性,如:光学性质、磁性质以及电磁学性质[5],使其在催化、信息存储及非线性光学等领域展示了广阔的应用前景[6]。虽然制备金属纳米颗粒的方法有很多[6],但是由于纳米尺寸的金属颗粒具有较高的表面能,容易发生聚集,所以如何保持其稳定性依旧是比较困难的问题。随着纳米科技的发展,人们正尝试用各种方法来解决这个问题:如…     

聚苯胺水基胶体分散液及其复合物的研究：Ⅱ.紫外光谱及导电性能

利用紫外可见光谱研究了聚苯胺在水基胶体分散液中掺杂与脱掺杂过程，证实了ＰＡｎ的掺杂与脱掺杂是完全可逆的过程。当ｐＨ＝３．５时，开始脱掺杂，当ｐＨ＝６．０时，掊掺杂已基本结束。ＰＡｎ颗粒的大小也对紫外光谱有影响。当聚苯胺颗粒尺寸达到纳米量级时，复合膜光谱吸收峰明显半移，表现出表面效应和量子尺寸效应。     

高分散体系对化学平衡的影响

一、前言对于分散度不高的反应体系,表面效应可以忽略不计。但是,当体系的分散度较高时,表面效应就比较明显;对于这样的体系,如果用非分散体系的化学平衡理论处理的话,结果就会产生偏差,分散度越高,则偏差越大。关于高分散体系的化学平衡问题,作者查     

化学氧化对多孔硅表面态和光致发光的影响

自1990年英国科学家Canham发现室温下多孔老（poroussilicon缩写为PS）的可见光区光致发光以来，在世界范围内迅速形成了一股强大的多孔硅研究热．硅是间接禁带半导体．禁带宽度为1．11eV，不可能在可见区发光．对于多孔硅在可见区的强烈荧光发射及其形成，Canham和Lehamm等分别建议可用量子线的尺寸限制效应未解释[1,2]．但Tsai和Hance等用FTIR研究经过后处理的多孔老样品[3]，认为多孔硅的发光与表面的硅氢化物相关，并提出硅的二氢化物SiH2的浓度与荧光强度相关．关于多孔硅的发光机制，还有非晶态发光[4]等说法．因止匕多孔硅的发…     

憎水性单分散粒径小于10 nm复合金属量子点的制备

0引言粒径小于10nm的量子点,具有特殊的物理化学性质。如低电子转换性能、高氧化还原电位,高矫顽力,高催化性能等,金量子点还具有生物识别、生物传感器等性能[1]。纳米颗粒的合成与应用已经引起人们的广泛兴趣[2￣4],二维、三维量子点阵长程有序排布对将来的纳米电子器件及超功能性材料具有重要意义[5,6]。然而,二维、三维量子点阵长程有序排布需要单分散量子点。这就需要人们利用各种方法制备单分散量子点。直接合成法,如Lianos等[7,8],利用反胶束法合成出粒径为5nm量子点,但是单分散性不佳。目前,获得单分散纳米颗粒主要有3种方法,种子增…     

[Ar…Ar-H]+分子振动光谱的理论计算

中心对称的线性结构[Ar-H-Ar]M⁺及非对称线性结构[Ar…Ar-H]⁺是[Ar₂H]⁺的两个稳定构型. 基于近期由本组提供的[Ar₂H]⁺分子的基态势能面, 应用含时波包演化方法计算了总角动量J = 0时的[Ar…Ar-H]SUP>+构型下的振动光谱, 观察到量子隧道效应对振动光谱的影响, 并通过观察本征态波函数性质以及修饰势能面等方法对其中的一些谱峰进行了指认, 发现[Ar-H-Ar]⁺构型的高弯曲振动激发态与[Ar…Ar-H]⁺的振动态之间存在强烈耦合的现象.     

Nanodiamond pretreatment for the modification of diamond electrodes by platinum nanoparticles

The preparation of Pt-modified diamond electrodes by electrodeposition is known to be hampered by poor particle adhesion and a lack of uniformity in the spatial distribution of the deposit over the electrode surface. Here we demonstrate the results can be improved significantly if the electrode is given a simple ultrasonic treatment in the presence of diamond powders prior to electrodeposition. An improvement in spatial distribution and a higher Pt dispersion are seen and, especially, a greater Pt particle stability is observed. Application of these Pt modified diamond electrodes in the electrochemical oxidation of hydrogen peroxide is demonstrated.     

Use of Ion-Exchange Membranes in Chemical Power Cells

A chemical power cell is suggested, in which the positive and negative electrodes are placed each in its own electrolyte. This makes it possible to obtain the highest absolute value of the electrode potential of each electrode. The electromotive force and the maximum theoretical specific energy are calculated for an acid-alkaline-salt battery of the zinc-dioxide-lead system.     

Development of Miniature Solid Contact Ion Selective Electrodes for in situ Instrumentation

Using a standardized miniature format ion selective electrode, five different carbon based solid contact materials, including a novel commercially available graphene oxide assisted carbon nanotube dispersion (Flexiphene^TM), were compared. The electromotive force (EMF) response, stability, and behavior following storage was evaluated. Bulk resistance for the novel graphene oxide/carbon nanotube (GO‐CNT) based ISE was observed to be 0.09±0.03 MΩ, which is two orders of magnitude lower than reported for either component in isolation. The results for previously described solid contact materials are in general agreement with the literature, and the tradeoffs between solid contact layer material choices are discussed. Performance of GO‐CNT solid contact ion selective electrodes were then evaluated in a 3D‐printed fluidic array to determine their suitability for future in situ instruments.     

A Self‐contained Two‐electrode Nanosensor for Electrochemical Analysis in Aqueous Microenvironments

We describe the development, fabrication, and characterization of a novel two‐electrode nanosensor contained within the tip of a needle‐like probe. This sensor consists of two, vertically aligned, carbon structures which function as individual electrodes. One of the carbon structures was modified by silver electrodeposition and chlorination to enable it to function as a pseudo‐reference electrode. Performance of this pseudo‐reference electrode was found to be comparable to that of commercially available Ag/AgCl reference electrodes. The unmodified carbon structure was employed as a working electrode versus the silver‐plated carbon structure to form a two‐electrode sensor capable of characterizing redox‐active analytes. The nanosensor was demonstrated to be capable of electrochemically characterizing the redox behavior of para‐aminophenol (PAP) in both bulk solutions and microenvironments. PAP was also measured in cell lysate to show that the nanosensor can detect small concentrations of analyte in heterogenous environments. As the working and reference electrodes are contained within a single nanoprobe, there was no requirement to position external electrodes within the electrochemical cell enabling analysis within very small domains. Due to the low‐cost manufacturing process, this nanoprobe has the potential to become a unique and widely accessible tool for the electrochemical characterization of microenvironments.     

调制脉冲电沉积法制备质子交换膜燃料电池铂催化电极

通过调制脉冲电流在质子交换树脂(Nafion)粘接的无催化多孔碳电极(UCE)上电沉积Pt 催化剂, 对所沉积Pt 催化电极性能及负载量用循环伏安法(CV)、X 射线衍射仪(XRD)、透射电镜(TEM)及分光光度法进行了表征. 结果表明, 通过调制电沉积过程的脉冲参数, 能够实现质子交换膜燃料电池(PEMFC)电极Pt催化剂的直接电化学沉积, 能够调控电沉积Pt粒径, 并能有效地缓解电沉积过程中析氢对沉积金属催化剂铂的干扰, 所沉积的Pt 催化剂利用率较传统Nafion 粘接Pt/C催化电极要高. 脉冲导通时间ton 为300 μs、断通时间toff 为1200 μs, 脉冲峰值电流密度jp 为100 mA·cm-2 时, 电沉积120 s制得的电极的Pt 晶粒约5-8 nm, Pt 表面利用率为43.14%, 沉积Pt的电流效率为45%.     

Three-dimensional arrangements of polystyrene latex particles with a hyperbolic quadruple electrode system

An attempt was made to arrange polystyrene latex particles (2, 5, and 10 microm in diameter) dispersed in aqueous media making use of their dielectrophoresis and electrophoresis with a hyperbolic quadruple electrode system. Application of a high-frequency ac field enabled the particles to arrange themselves between the electrodes forming a particle monolayer due to the negative dielectrophoretic force. Simultaneous application of high-frequency ac and dc fields caused the particles to gather in the region surrounded by the electrodes to form particle multilayers. Appropriate choice of the way of applying an electric field thus allowed the reversible control of particle arrangements (monolayer, multilayer, dispersion). Reapplication of an ac field to the particle layers produced highly dense particle multilayers.     

电沉积制备钯铂电极上乙醇的电催化氧化

研究了乙醇在碱性介质（１．０ｍｏｌ·Ｌ－１ＮａＯＨ）中电沉积制备的Ｐｄ／ＧＣ、Ｐｔ／ＧＣ和Ｐｄ．Ｐｔ／ＧＣ电极上的电催化氧化．实验结果表明：由此法制备的钯铂系列合金电极对乙醇的电催化氧化表现出明显的协同效应─—乙醇在含把原子分数ｙｐｂ＝０．３３６的Ｐｄ－Ｐｔ／ＧＣ合金电极上的阳极交换电流密度是其在纯铂电极上的３０多倍．     

电沉积制备钯铂电极上乙醇的电催化氧化

研究了乙醇在碱性介质（１．０ｍｏｌ．Ｌ＾－１ＮａＯＨ）中电沉积制备的Ｐｂ／ＧＣ、Ｐｔ／ＧＣ和Ｐｄ－ｐｔ／ＧＣ电极上的电催化氧化,实验结果表明：由此法制备的钯铂系列合金电极对乙醇的电催化氧化表现出明显的协同效应－乙醇的含钯原子分数ｙｐｄ＝０．３３６的ｐｄ－ｐｔ／ＧＣ合金电极上的节极交换电流密度是其在纯铂电极上的３０多倍。     

Enhancement of the Electrochemical Performance of Prussian Blue Modified Electrode via Ionic Liquid Treatment

This article first reports the preparation of a Prussian blue (PB) modified electrode with improved electrochemical properties at the functionalized glass carbon electrode (GC) by imidazolium based ionic liquid. The molecular ionic liquid film on the GC electrode has been found to influence the electrodeposition of PB by a way of enhancement of voltammetric currents, suggesting efficient electrodepositon. Such efficient electrodeposition was caused by the static electric effect which existed between the positively charged imidazolium group on the electrode surface and the negative ferric‐ferricyanide in solution. Compared with the PB/GC electrode, the PB/[Bmim][Cl]/GC electrode showed much better electrochemical stability after successive potential cycling for 250 cycles. A comparative study on amperometric responses of both electrodes to reduce H₂O₂ was also investigated. PB/[Bmim][Cl]/GC electrode showed a better electrocatalytic performance to H₂O₂ with wider linear detection range and higher sensitivity than that at the electrode without [Bmim][Cl]. Furthermore, the kinetics for both electrodes was discussed. The PB/[Bmim][Cl]/GC electrode possessed a greater diffusion coefficient.     

电势法测定KI在CH_3OH-H_2O混合溶剂中的活度系数

用无液接电势电池测定了303.15 K时,KI在甲醇-水混合溶剂中的电动势,用扩展的Debye-Hückel方程及Pitzer方程关联不同溶剂组成下电动势的实验值,得到电池的标准电动势E°和KI在混合溶剂中的活度系数.结果表明,在一定的溶剂比例下,随KI浓度的增大,其平均活度系数先随它的浓度增加而下降,经过一个最低点后又上升;或者随浓度增加而单调递减.当KI浓度固定时,它的平均活度系数随溶剂中甲醇的含量增加而下降.表明KI在甲醇中有微弱的缔合.