In situ assembly, regeneration and plasmonic immunosensing of a Au nanorod monolayer in a closed-surface flow channel

Herein, a simple and effective approach is reported for the in situ generation and regeneration of a Au nanorod (AuNR) monolayer inside a glass/silica-based, closed-surface flow channel. The density of the AuNR monolayer in the flow channel can be easily modified by varying the concentration of the AuNR and the cetyltrimethylammonium bromide as well as the incubation time. The fabricated AuNR monolayer in the flow channels was stable under harsh conditions, such as in extreme pH, organic solvents and at a fast flow rate. In addition, the flow channel could be reused by removing the immobilized AuNRs via the injection of diluted aqua regia or potassium iodide; the AuNR monolayer can subsequently be regenerated. The AuNRs in the closed flow channel were further exploited as a label-free detection method for a clinical biomarker, neutrophil gelatinase-associated lipocalin (NGAL), based on single-nanoparticle plasmonic assay. The corresponding limit of detection for NGAL was measured to be 8.5 ng mL(-1) (~340 pM) based on a signal-to-noise ratio of 3. The estimated recovery of NGAL in human serum and urine was higher than 80%, which indicates that this technique could potentially be used for the diagnosis of acute kidney injury.     

Monolayers as models for supported catalysts: zirconium phosphonate films containing manganese(III) porphyrins

Organized monolayer films of a manganese tetraphenylporphyrin have been prepared and used as supported oxidation catalysts. Manganese 5,10,15,20-tetrakis(tetrafluorophenyl-4'-octadecyloxyphosphonic acid) porphyrin (1) has been immobilized as a monolayer film by a combination of Langmuir-Blodgett (LB) and self-assembled monolayer techniques that use zirconium phosphonate linkages to bind the molecule to the surface. Analysis by FTIR, XPS, UV-vis and polarized optical spectroscopy show that the films consist of noninteracting molecules effectively anchored and oriented nearly parallel to the surface. The monolayer films are stable to the solvent and temperature conditions needed to explore organic oxidations. The activity of films of 1 toward the epoxidation of cyclooctene using iodosylbenzene as the oxidant was compared to that of Manganese 5,10,15,20-tetrakis(pentafluorophenyl) porphyrin (2) and 1 under equivalent homogeneous conditions. The immobilized porphyrin 1 shows an enhanced activity relative to either homogeneous reaction. The main difference between 1 and 2 is the four alkyl phosphonate arms in 1 designed to incorporate the porphyrin within the films. The increased activity of immobilized 1 is a combination of the porphyrin structure, which prohibits the formation of mu-oxo dimers even in solution, and a change in conformation when anchored to the surface. The study demonstrates that careful monolayer studies can provide useful models for the design and study of supported molecular catalyst systems.     

Applications of silica supports in affinity chromatography

The combined use of silica-based chromatographic supports with immobilized affinity ligands can be used in many preparative and analytical applications. One example is the use of silica-based affinity columns in HPLC, giving rise to a method known as high-performance affinity chromatography (HPAC). This review discusses the role that silica has played in the development of affinity chromatography and HPAC and the applications of silica in these methods. This includes a discussion of the types of ligands that have been employed with silica and the methods by which these ligands have been immobilized. Various formats have also been presented for the use of silica in affinity chromatographic methods, including assays involving direct or indirect analyte detection, on-line or off-line affinity extraction, and chiral separations. The use of silica-based affinity columns in studies of biological systems based on zonal elution and frontal analysis methods will also be considered.     

荧光素衍生物LB膜对TiO2电极的光敏化作用

合成了三种荧光素长碳链衍生物，通过LB技术将它们组装成单分子薄膜，修饰在用溶胶-凝胶法制备的TiO2透明电极上，研究了这些LB膜的结构和特性及它对TiO2的光增感作用．并对其光敏化机理作了阐述．     

Preparation and properties of surface modified ceramic membranes. Part II. Gas and liquid permeabilities of 5 nm alumina membranes modified by a monolayer of bound polydimethylsiloxane (PDMS) silicone oil

A new way to prepare hydrophobic membranes is reported. Polydimethylsiloxane oil (and any other silicone oil molecules) was grafted onto a porous alumina membrane (or any hydroxylated ceramic or glass) by heating, to 180°C, producing a covalently grafted monolayer of silicone oil, chemically and thermally stable, unaffected by organic solvents but susceptible to alkali attack (as is the silicone oil itself). The membrane is totally impermeable to pure water, and organic solvents may be extracted from water mixtures by pervaporation. Very high permeation fluxes were obtained, suggesting possible use of these silicone/ceramic membranes in extraction of volatile organic compounds (VOCs). This simple modification can be applied to macroporous membranes increasing hydrophobicity without pore blocking.     

Stability studies of stationary phases from poly(methyltetradecylsiloxane) sorbed and immobilized onto metalized and unmodified silicas

Stationary phases for RP-HPLC were prepared from metalized (titanized and zirconized) and unmodified silica particles using sorbed and immobilized poly(methyltetradecylsiloxane) (PMTDS). Different immobilization procedures, such as gamma irradiation and thermal treatments, were used for the preparation of the immobilized PMTDS phases. The stabilities of these stationary phases were evaluated by passing alkaline (pH 10) mobile phase through 60 mm x 3.9 mm columns of the different phases, with periodic tests to evaluate chromatographic performance. The results show that higher stabilities were obtained with stationary phases based on PMTDS immobilized on zirconized silica, these phases being 50% more stable than their titanized silica counterparts and 400% more stable than those based on unmodified silica. These supports provide higher chemical stability to the laboratory-made stationary phases, when compared with chemically bonded silica-based phases.     

Assembly of oriented zeolite monolayers and thin films on polymeric surfaces via hydrogen bonding

The b-oriented monolayers of microsized silicalite-1 crystals have been manually assembled on glass plate supported poly(ethylene oxide) (PEO), poly(vinyl alcohol) (PVA), chitosan, and poly(methyl methacrylate) (PMMA) thin films via hydrogen bonding with much enhanced binding strength and satisfactory degrees of coverage and close packing. The exerted pressure and rubbing time in the manual assembly do not affect the binding strength of the silicalite-1 monolayer on the glass plate supported polymeric film. This manual assembly has been further applied to fabricate zeolite monolayers on commercially available Plexiglas surfaces and b-oriented multilayered films of silicalite-1 crystals on glass plates. The assembly method established in this study provides a feasible way to produce zeolite monolayers on polymer-modified solid substrates and Plexiglas and to fabricate zeolite-polymer composite membranes by means of the layer-by-layer technique.     

Formation of high-capacity protein-adsorbing membranes through simple adsorption of poly(acrylic acid)-containing films at low pH

Layer-by-layer polyelectrolyte adsorption is a simple, convenient method for introducing ion-exchange sites in porous membranes. This study demonstrates that adsorption of poly(acrylic acid) (PAA)-containing films at pH 3 rather than pH 5 increases the protein-binding capacity of such polyelectrolyte-modified membranes 3-6-fold. The low adsorption pH generates a high density of -COOH groups that function as either ion-exchange sites or points for covalent immobilization of metal-ion complexes that selectively bind tagged proteins. When functionalized with nitrilotriacetate (NTA)-Ni(2+) complexes, membranes containing PAA/polyethylenimine (PEI)/PAA films bind 93 mg of histidine(6)-tagged (His-tagged) ubiquitin per cm(3) of membrane. Additionally these membranes isolate His-tagged COP9 signalosome complex subunit 8 from cell extracts and show >90% recovery of His-tagged ubiquitin. Although modification with polyelectrolyte films occurs by simply passing polyelectrolyte solutions through the membrane for as little as 5 min, with low-pH deposition the protein binding capacities of such membranes are as high as for membranes modified with polymer brushes and 2-3-fold higher than for commercially available immobilized metal affinity chromatography (IMAC) resins. Moreover, the buffer permeabilities of polyelectrolyte-modified membranes that bind His-tagged protein are ~30% of the corresponding permeabilities of unmodified membranes, so protein capture can occur rapidly with low-pressure drops. Even at a solution linear velocity of 570 cm/h, membranes modified with PAA/PEI/PAA exhibit a lysozyme dynamic binding capacity (capacity at 10% breakthrough) of ~40 mg/cm(3). Preliminary studies suggest that these membranes are stable under depyrogenation conditions (1 M NaOH).     

Stretching of single DNA molecules complexed with restriction endonuclease by Langmuir-Blodgett method

We have proposed a new technique for stretching single double-stranded DNA molecules on solid substrates by the Langmuir–Blodgett (LB) method. The polyion complex monolayer of a cationic amphiphile and DNA molecules formed at the air–water interface was transferred on a clean glass substrate. Vertical lifting up of the glass substrate provided the transferred monolayer consisting the stretched individual DNA molecules aligned parallel to the lifting direction on the glass. The DNA molecules complexed with the restriction endonuclease (EcoRI) were employed for stretching by using this method. Fluorescence images of the transferred monolayer showed that the EcoRI-binding DNA molecules could be stretched and immobilized on the glass substrate. A specific sequence of DNA recognized by EcoRI was detected as spatial positions of the stretched DNA molecules.     

Covalently attached graft polymer monolayer on organic polymeric substrate via confined surface inhibition reaction

A grafting technique was proposed for the preparation of polymer monolayer on polymeric substrate. On the basis of our recent work on polymer‐supported inhibitor (PSI), hydroquinone (HQ) was first implanted onto polypropylene (PP) surface through UV‐initiated grafting. The resulting immobilized HQ was used as PSI for the thermal‐induced free radical polymerization (FRP) of acrylic acid (AA). The inhibition mechanism was similar to that of free HQ molecule, that is, polymer chain‐carrying radical or peroxy radical could be deactivated by abstracting hydrogen atom from hydroxyl group of immobilized HQ, and the resulting oxyradical (semiquinone radical) combined with another active chain free radical. According to this mechanism, a devised redox initiator consisting of sodium hydrogen sulfite and ammonium persulfate was used to initiate FRP of AA in water at low temperature (50 °C). High crystalline biaxial oriented PP film with HQ immobilized was deliberately laid in this system as a radical trap to capture poly(acrylic acid) (PAA) short chain radical. Through X‐ray photoelectron spectra (XPS) analysis it was found that the atom ratio of C_HQ (carbon in HQ) to C_COOH (carbon in COOH) decreased with prolonging polymerization time and became stable after about 30 min. The formed PAA short chain on the surface showed a distribution of monolayer, and the saturated thickness was calculated as 5–7 Å. The degree of polymerization of graft chain in PAA monolayer was estimated as 15–20 through three different models. Relating to surface coverage being 100% in ideal densely packed PAA monolayer, real monolayer surface coverage in such reaction system was estimated as 12.3–18.5%. This method was expected to give us a general approach for constructing kinds of graft polymer monolayer on polymeric substrate, because the involved chemistry was only common inhibition reaction between immobilized inhibitor (HQ) and FRP system in solution (herein redox initiating system of AA). We named this grafting chemistry as confined surface inhibition reaction. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 745–755, 2007     

Quantitative electrochemical SERS of flavin at a structured silver surface

In situ electrochemical surface enhanced Raman spectra (SERS) for an immobilized monolayer of a flavin analogue (isoalloxazine) at nanostructured silver surfaces are reported. Unique in the present study, the flavin is not directly adsorbed at the Ag surface but is attached through a chemical reaction between cysteamine adsorbed on the Ag surface and methylformylisoalloxazine. Even though the flavin is held away from direct contact with the metal, strong surface enhancements are observed. The nanostructured silver surfaces are produced by electrodeposition through colloidal templates to produce thin (<1 microm) films containing close-packed hexagonal arrays of uniform 900 nm sphere segment voids. The sphere segment void (SSV) structured silver surfaces are shown to be ideally suited to in situ electrochemical SERS studies at 633 nm, giving stable, reproducible surface enhancements at a range of electrode potentials, and we show that the SER spectra are sensitive to subfemtomole quantities of immobilized flavin. Studies of the SER spectra as a function of the electrode potential show clear evidence for the formation of the flavin semiquinone at the electrode surface at cathodic potentials.     

Immobilization of proteins on gold coated porous membranes via an activated self-assembled monolayer of thioctic acid

A new methodology for efficient protein (e.g., antibodies, enzymes, etc.) immobilization on microporous nylon membranes for use in a variety of bioanalytical systems is introduced. The method utilizes an activated self-assembled monolayer (SAM) of thioctic acid on gold coated forms of the membranes. Via a carbodiimide mediated reaction, the protein is anchored to the gold surface through an amide bond with the terminal carboxyl group of the adsorbed thioctic acid. The immobilization efficiency is high (95% for a monoclonal immunoglobulin G(IgG) and the surface bound protein appears to be stable enough to resist any displacement by other proteins in a matrix as complex as serum. Immunological activity of immobilized antibody is retained as demonstrated via use of such membrances in colorimetric ELISA for human chorionic gonadatropin (hCG). The high protein immobilization efficiency, the high tensile strength of microporous nylon membranes, and the excellent electrochemical characteristics of gold make this approach very attractive for preparing biomembranes that should be useful in affinity chromatography, electrochemical immunosensing systems, flow-through enzyme reactors, etc.     

Surface characterization of 3-glycidoxypropyltrimethoxysilane films on silicon-based substrates

Silane coupling agents are commonly used to activate surfaces for subsequent immobilization of biomolecules. The homogeneity and surface morphology of silane films is important for controlling the structural order of immobilized single-stranded DNA probes based on oligonucleotides. The surfaces of silicon wafers and glass slides with covalently attached 3-glycidoxypropyltrimethoxysilane (GOPS) have been characterized by using angularly dependent X-ray photoelectron spectroscopy (XPS), time-of-flight secondary-ion mass spectrometry (ToF–SIMS), atomic force microscopy (AFM), scanning electron microscopy (SEM), and monochromatic and spectroscopic ellipsometry. XPS and ToF–SIMS data provided evidence of complete surface coverage by GOPS. Data from angularly resolved XPS and ellipsometry methods suggested that the GOPS films were of monolayer thickness. AFM and SEM data indicated the presence of films that consisted of nodules approximately 50–100 nm in diameter. Modeling suggested that the nodules may lead to a nanoscale structural morphology that might influence the hybridization kinetics and thermodynamics of immobilized oligonucleotides.     

Enzymatic biotransformations of Peritan-Na by immobilized fungal mycelium fragments ofTrametes versicolor

The mycelium ofTrametes versicolor after 5 d growing in submerged cultures was homogenized and the pellets containing cell membranes were immobilized on alkylamine glass beads. The immobilized mycelial fragments were able to modify the molecular weight of Peritan-Na after only 4 h of incubation. Besides this phenomenon, the release of six free phenolic compounds was detected. Among these there were, for example, vanillin derivatives, syringic acid, andp-hydroxybenzaldehyde. This release was dependent upon pH, temperature, and the reaction time of the supposed enzymatic mechanism of the reaction. In short term (up to 6 h) experiments, the complex polymer of Peritan-Na might be transformed into molecules approximately closer to monomers of lignin as well as new lignin-like forms. According to our observations, the biotransformation of Peritan-Na follows a series of enzymatic reactions. It is supposed that enzymes necessary for these reactions are present in immobilized cell membrane fragments ofTrametes versicolor.     

Layered paving of vesicular nanoparticles formed with cerasome as a bioinspired organic-inorganic hybrid

A three-dimensional packed vesicular assembly was successfully prepared by using an organic-inorganic hybrid, the Cerasome. This assembly was achieved by using an alternate layer-by-layer adsorption technique with the anionic and the cationic Cerasome derived from corresponding organoalkoxysilane amphiphiles. Adsorption quantities of each Cerasome layer were evaluated by employing a quartz crystal microbalance. The surface structure of the Cerasome paving on a substrate obtained in this way was observed by atomic force microscopy. The Cerasome particles closely packed like a stone pavement were clearly observed in both layers. In addition, the difference in the particle size for each layer indicates the cationic and anionic Cerasomes undoubtedly formed the layer-by-layer assembly. The layered paving of the vesicular nanoparticles was seen in every layer at least up to ten adsorption steps.     

Preparation and characterization of electrically conducting Langmuir-Blodgett films of poly(N-octadecylaniline)

A stable monolayer of N-octadecylaniline containing stearic acid at the air-water interface has been obtained. However, the Langmuir monolayer of pure poly(N-octadecylaniline) was not stable, but mixed Langmuir-Blodgett films of this polymer with stearic acid in different ratios as a spreading aid were stable. The electrical conductivity of these films increased by five orders of magnitude after doping with iodine as compared to that before iodine doping (5.8x10(-7) S cm(-1)). Temperature-dependent electrical conductivity suggested that these films were semiconducting in nature with low thermal activation energy. Impedance analyses of these films revealed that the equivalent circuit for poly(N-octadecylaniline) was (RQ) whereas that for mixed poly(N-octadecylaniline) with stearic acid was (RQ)(RQ).     

Completely aqueous procedure for the growth of polymer brushes on polymeric substrates

The growth of polymer brushes on polymer substrates is often challenging because of substrate incompatibility with the organic solvents used for initiator attachment. This letter reports the use of layer-by-layer adsorption of macroinitiators and subsequent aqueous ATRP from these immobilized initiators to prepare polymer brushes on polymeric substrates. Polyethersulfone (PES) films and porous membranes were modified with polyelectrolyte multilayer films, and a previously developed polycationic initiator, poly(2-(trimethylammonium iodide)ethyl methacrylate-co-2-(2-bromoisobutyryloxy)ethyl acrylate), was then electrostatically adsorbed onto these polyelectrolyte films. The immobilized macroinitiator is very efficient in initiating the growth of polymer brushes on PES, as demonstrated by aqueous syntheses of poly(2-hydroxyethyl methacrylate) (PHEMA) and poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) films. PHEMA (250 nm thick) and PDMAEMA (40 nm thick) brushes were grown in 2 h from surfaces modified with polycationic initiators. Moreover, this procedure is effective for growing brushes in the pores of PES membranes.     

Catalytic activity of glucose oxidase after dielectrophoretic immobilization on nanoelectrodes

Dielectrophoresis (DEP) is an AC electrokinetic effect that is proven to be effective for the immobilization of not only cells, but also of macromolecules, for example, antibodies and enzyme molecules. In our previous work, we have already demonstrated the high catalytic activity of immobilized horseradish peroxidase after DEP. To evaluate the suitability of the immobilization method for sensing or research in general, we want to test it for other enzymes, too. In this study, glucose oxidase (GOX) from Aspergillus niger was immobilized on TiN nanoelectrode arrays by DEP. Fluorescence microscopy showed the intrinsic fluorescence of the immobilized enzymes flavin cofactor on the electrodes. The catalytic activity of immobilized GOX was detectable, but a fraction of less than 1.3% of the maximum activity that was expected for a full monolayer of immobilized enzymes on all electrodes was stable for multiple measurement cycles. Therefore, the effect of DEP immobilization on the catalytic activity strongly depends on the used enzyme.     

Monolayers and Langmuir-Blodgett films of crown-substituted phthalocyanines

Tetra-15-crown-5-phthalocyanine ligand and its ruthenium complex with axial CO and MeOH groups were synthesized. The properties of their monolayers and Langmuir-Blodgett films were studied. In the case of the ligand, monolayer films of molecular associates are formed. The compatibility of the ligand and stearic acid in a mixed binary monolayer was established. Stearic acid improves the ligand distribution over the water surface and results in the formation of monolayer associates immobilized in its matrix. The condensation effect of Na⁺ cations on the mixed monolayers was found. The ruthenium complex (R₄Pc)Ru(MeOH)(CO) forms stable true monolayers. The macrocycle planes in stacking are inclined relatively to the normal to the subphase surface by an angle of 25°. The Langmuir-Blodgett films of the complex were established to have redox peaks. A high electrochemical stability of the Langmuir-Blodgett films and a high electroactivity of phthalocyanine rings were demonstrated. It was shown by impedance spectroscopy that the binding of Na⁺ and K⁺ ions by Langmuir-Blodgett films of the (R₄Pc)Ru(MeOH)(CO) complex results in an increase in the impedance values in a region of medium frequencies by three and five times, respectively.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2426–2435, November, 2004.     

Langmuir-Blodgett单分子膜功能体系的研究(Ⅲ).有序单分子膜内的J-聚体

本文讨论了单分子膜内J-聚体的性质、稳定性以及影响J-聚体形成的因素。实验中发现,制备有序单分子膜时,机械振动是影响J-聚体形成的重要因素;利用分子的电性质,靠外加电场的作用,可以增加J-聚体的成份。载于玻璃载片上单分子膜中的J-聚体在室温下就可以破坏,在低温下能够得以保存。根据J-聚体的能级性质及其在能量转移中的作用,作者认为,J-聚体可以形成激子态,J-聚体内的能量转移是激子转移。