Applications of capillary electrophoresis to the determination of antibiotics in food and environmental samples

In this paper we review applications of capillary electrophoresis (CE) to the determination of antibiotic residues in food derived from animals and in environmental samples. Although many CE methods have been used to determine antibiotics in the pharmaceutical field (drug quality control or therapeutic monitoring in biological samples), food and environmental applications have been increasing in recent years. Due to the maximum residue limits established by the EU, in Directive 2377/90/EEC, for foodstuffs of animal origin and considering the low levels that can be found in environmental or waste waters or soils, different strategies to increase sensitivity have been developed, including off-line preconcentration, on-line stacking modes to use higher sample volumes, or in-line solid-phase extraction. Also, several detection techniques, such as fluorescence, laser-induced fluorescence, electrochemical detection, or mass spectrometry have been used; the last of these also enables unequivocal identification of the residues, required by Commission Decision 2002/657/EC. All these aspects will be discussed in this paper, in relation to the main groups of antibiotics used in veterinary and human medicine, for which applications in food and environmental samples have been developed by using CE as an efficient alternative to liquid chromatography.     

Recent advances of capillary electrophoresis in pharmaceutical analysis

This review covers recent advances of capillary electrophoresis (CE) in pharmaceutical analysis. The principle, instrumentation, and conventional modes of CE are briefly discussed. Advances in the different CE techniques (non-aqueous CE, microemulsion electrokinetic chromatography, capillary isotachophoresis, capillary electrochromatography, and immunoaffinity CE), detection techniques (mass spectrometry, light-emitting diode, fluorescence, chemiluminescence, and contactless conductivity), on-line sample pretreatment (flow injection) and chiral separation are described. Applications of CE to assay of active pharmaceutical ingredients (APIs), drug impurity testing, chiral drug separation, and determination of APIs in biological fluids published from 2008 to 2009 are tabulated.     

Application of microemulsion electrokinetic chromatography to the analysis of a wide range of pharmaceuticals and excipients

Microemulsion electrokinetic chromatography (MEEKC) is a capillary electrophoresis (CE) technique in which solutes partition with moving oil droplets present in a microemulsion buffer. Ionised species will also separate by electrophoresis. In this paper MEEKC is shown to give highly efficient and relatively rapid separations for a wide range of pharmaceuticals, vitamins and excipients. A single set of operating conditions was used to resolve both water-soluble and insoluble compounds. The method was also used to separate both ionic and neutral compounds. The method was especially useful in the analysis of water-insoluble neutral compounds such as steroids and lecithin, which are difficult to analyse by CE. The method was found to be both quantitative and highly repeatable. The quality of the separation was found to be dependent upon the sample diluent used if large injection volumes are employed. The use of MEEKC for the determination of complex mixtures such as multi-ingredient formulations and drug-related impurities was successfully demonstrated. MEEKC offers significant advantages over many forms of CE and capillary electrochromatography (CEC) and should be considered as an extremely useful option in pharmaceutical analysis.     

Applications of capillary electrophoresis in the fields of environmental,pharmaceutical, clinical,and food analysis (2019–2021)

So far, the potential of capillary electrophoresis in the application fields has been increasingly excavated due to the advantages of simple operation, short analysis time, high-resolution, less sample consumption, and low cost. This review examines the implementations and advancements of capillary electrophoresis in different application fields (environmental, pharmaceutical, clinical, and food analysis) covering the literature from 2019 to 2021. In addition, ultrasmall sample injection volume (nanoliter range) and short optical path lead to relatively low concentration sensitivity of the most frequently used ultraviolet-absorption spectrophotometric detection, so the pretreatment technology being developed has been gradually utilized to overcome this problem. Despite the review being focused on the development of capillary electrophoresis in the fields of environmental, pharmaceutical, clinical, and food analysis, the new sample pretreatment techniques of microextraction and enrichment fit excellently to capillary electrophoresis in recent three years are also described briefly.     

A decade of capillary electrophoresis

Since the introduction of the first commercial capillary electrophoresis (CE) instrument a decade ago, CE applications have become widespread. Today, CE is a versatile analytical technique which is successfully used for the separation of small ions, neutral molecules, and large biomolecules and for the study of physicochemical parameters. It is being utilized in widely different fields, such as analytical chemistry, forensic chemistry, clinical chemistry, organic chemistry, natural products, pharmaceutical industry, chiral separations, molecular biology, and others. It is not only used as a separation technique but to answer physicochemical questions. In this review, we will discuss different modes of CE such as capillary zone electrophoresis, micellar electrokinetic chromatography, capillary gel electrophoresis, capillary isoelectric focusing, and capillary electrochromatography, and will comment on the future direction of CE, including array capillary electrophoresis and array microchip separations.     

Quantitative determination of sulfur-containing anions in complex matrices with capillary electrophoresis and conductivity detection.

The analysis of sulfur species in complex matrices, like environmentally related samples, requires selective and sensitive as well as robust determination methods. As many as possible different anions need to be quantified in a reasonable analysis time. Besides ion chromatography, capillary electrophoresis has proven to be a very efficient technique for the separation and determination of ionic compounds. With the advantages of less sample and solvent consumption compared to conventional LC, short separation time, inexpensive and robust capillaries, CE was used to separate the anions sulfate, sulfite, thiosulfate, thiocyanate and sulfide. Detection and injection modes and the composition of the separation buffers have been varied to find the most suitable conditions. Conductivity detection after electrokinetic sample injection and improvement of calibration linearity allowed the determination of sulfur containing anions with low limits of detection (8 to 50 micrograms/l). The developed CE method was applied to the analysis of water from an open-pit mining lake.     

Capillary electrophoresis of inorganic anions

This review deals with the separation mechanisms applied to the separation of inorganic anions by capillary electrophoresis (CE) techniques. It covers various CE techniques that are suitable for the separation and/or determination of inorganic anions in various matrices, including capillary zone electrophoresis, micellar electrokinetic chromatography, electrochromatography and capillary isotachophoresis. Detection and sample preparation techniques used in CE separations are also reviewed. An extensive part of this review deals with applications of CE techniques in various fields (environmental, food and plant materials, biological and biomedical, technical materials and industrial processes). Attention is paid to speciations of anions of arsenic, selenium, chromium, phosphorus, sulfur and halogen elements by CE.     

Recent advances in capillary electrophoresis and capillary electrochromatography of pollutants

Recent advances in capillary electrophoresis (CE) and capillary electrochromatography (CEC) separation, detection and sample preparation methodologies applied for the determination of a variety of pollutants is overviewed. The reviewed literature illustrates the wide range of CE applications, indicating the continuing interest in CE and CEC in the environmental field.     

Comparative study of aqueous and non-aqueous capillary electrophoresis in the separation of halogenated phenolic and bisphenolic compounds in water samples

Capillary zone electrophoresis methods, based on either aqueous and non-aqueous solutions as running buffers and UV spectrophotometric detection, have been developed and optimized for the separation of several halogenated phenolic and bisphenolic compounds, suspected or proved to exhibit hormonal disrupting effects. Both aqueous capillary electrophoresis (CE) and non-aqueous capillary electrophoresis (NACE) methods were suitable for the analysis of compounds under study. The separation of the analytes from other 25 potentially interfering phenolic derivatives was achieved with NACE method. Large-volume sample stacking using the electroosmotic flow pump (LVSEP) was assayed as on-column preconcentration technique for sensitivity enhancement. LVSEP-CE and LVSEP-NACE improved peak heights by 5-26 and 16-330 folds, respectively. To evaluate their applicability, the capillary electrophoresis methods developed were applied to the analysis of water samples, using solid-phase extraction as sample pre-treatment process.     

Capillary electrophoresis mass spectrometry and its application to the analysis of biological mixtures

Capillary electrophoresis (CE) mass spectrometry (MS), with its ability to separate compounds present in extremely small volume samples rapidly, with high separation efficiency, and with compound identification capability based on molecular weight, is an extremely valuable analytical technique for the analysis of complex biological mixtures. The highest sensitivities and separation efficiencies are usually achieved by using narrow capillaries (5-50 micro m i.d.) and by using sheathless CE-to-MS interfaces. The difficulties in CE-to-MS interfacing and the limited loadability of these narrow columns, however, have prevented CE-MS from becoming a widely used analytical technique. To remedy these limitations, several CE-MS interfacing techniques have recently been introduced. While electrospray ionization is the most commonly used ionization technique for interfacing CE-to-MS, matrix assisted laser desorption ionization has also been used, using both on-line and off-line techniques. Moreover, the high concentration detection limit of CE has been addressed by development of several sample concentration and sample focusing methods. In addition, a wide variety of techniques such as capillary zone electrophoresis, capillary isoelectric focusing, and on-column transient isotachophoresis have now been interfaced to MS. These advances have resulted in a rapid increase in the use of CE-MS in the analysis of complex biological mixtures. CE-MS has now been successfully applied to the analysis of a wide variety of compounds including amino acids, protein digests, protein mixtures, single cells, oligonucleotides, and various small molecules relevant to the pharmaceutical industry.     

Determination of therapeutic oligonucleotides using capillary gel electrophoresis

Oligonucleotides have developed into highly versatile and selective therapeutics over the past 20 years. More than five discrete mechanisms of action have been reported and more than 10 different chemical modifications have been used to extend their in vivo half-life and reduce their toxicity. Capillary gel electrophoresis (CGE) has been used extensively for the quantitative analysis of oligonucleotide therapeutics in both preclinical and clinical studies since the 1990s. The success of CGE is based on its extraordinary resolving power, which allows for the simultaneous determination of the parent drug and its metabolites. More recently, capillary gel electrophoresis has seen renewed interest with the emergence of replaceable gels with single-base resolving power and new capillary electrophoresis-mass spectrometry interfaces. This review discusses the bioanalysis of therapeutic oligonucleotides showing the evolution of the field over the past two decades leading to the current new approaches. Included in this review are topics such as different gel types, sample introduction modes, sample extraction procedures, separation conditions and detection methods used in CGE, along with discussions of the successes and limitations associated with each.     

毛细管电泳在手性分离中的应用及进展

本文评述了近年来毛细管电泳在手性分离中的应用及进展，介绍了毛细管电泳分离手性对映射的数学模型、五种不同的分离模式及机理、七种常用的手性选择性类型及其在药学、环境和生命科学中的应用、研究中需优化的操作参数及其发展方向。     

毛细管电泳和毛细管电色谱技术在农药残留检测中的应用

由于毛细管电泳（CE）和毛细管电色谱（CEC）具有所需样品体积小、分离效率高等特点,越来越多的学者已将它们应用到农药残留（简称农残）检测中,并将它们同各种不同的检测器以及样品浓缩方法相结合,以提高检测的灵敏度。本文对CE和CEC两种方法中所涉及的常见的样品预浓缩方法进行了简要的介绍。对各种不同类型的检测器（如紫外检测、荧光检测、电化学检测以及质谱检测等）的优缺点及其在农残检测中的应用情况进行了评述;同时对手性农药的CE和CEC分离检测情况进行了特别介绍;并对CE和CEC在农残分析与检测中的应用前景进行了展望。     

Recent advances in capillary electrophoresis‐mass spectrometry: Instrumentation,methodology and applications

Capillary electrophoresis (CE) offers fast and high‐resolution separation of charged analytes from small injection volumes. Coupled to mass spectrometry (MS), it represents a powerful analytical technique providing (exact) mass information and enables molecular characterization based on fragmentation. Although hyphenation of CE and MS is not straightforward, much emphasis has been placed on enabling efficient ionization and user‐friendly coupling. Though several interfaces are now commercially available, research on more efficient and robust interfacing with nano‐electrospray ionization (ESI), matrix‐assisted laser desorption/ionization (MALDI) and inductively coupled plasma mass spectrometry (ICP) continues with considerable results. At the same time, CE‐MS has been used in many fields, predominantly for the analysis of proteins, peptides and metabolites. This review belongs to a series of regularly published articles, summarizing 248 articles covering the time between June 2016 and May 2018. Latest developments on hyphenation of CE with MS as well as instrumental developments such as two‐dimensional separation systems with MS detection are mentioned. Furthermore, applications of various CE‐modes including capillary zone electrophoresis (CZE), nonaqueous capillary electrophoresis (NACE), capillary gel electrophoresis (CGE) and capillary isoelectric focusing (CIEF) coupled to MS in biological, pharmaceutical and environmental research are summarized.     

大通道毛细管电泳技术的研究进展

毛细管电泳(Capillary Electrophoresis,CE)在痕量物质的分析与检测、样品的半制备与制备、多维分析以及联用技术中仍面临巨大挑战,研究者从降低电场强度、使用低电导率缓冲液、加入有机试剂、引入制冷,发展了毛细管内径大于150 μm的大通道毛细管电泳技术(Wide-bore Electrophoresis,WBE).本文综述了这一新型大通道毛细管电泳及其相关的多维和联用技术,展望了WBE的发展趋势及潜在应用.     

Comparison between micellar liquid chromatography and capillary zone electrophoresis for the determination of hydrophobic basic drugs in pharmaceutical preparations

The determination of highly hydrophobic basic compounds by means of conventional reversed-phase liquid chromatographic methods has several drawbacks. Owing to the characteristics of micellar liquid chromatography (MLC) and capillary electrophoresis (CE), these techniques could be advantageous alternatives to reversed-phase chromatographic methods for the determination of these kinds of compounds. The objective of this study was to develop and compare MLC and CE methods for the determination of antipsychotic basic drugs (amitryptiline, haloperidol, perphenazine and thioridazine) in pharmaceutical preparations. The chromatographic determination of the analytes was performed on a Kromasil C(18) analytical column; the mobile phase was 0.04 m cetyltrimethylammonium bromide (CTAB), at pH 3, containing 5% 1-butanol, at a flow rate of 1 mL/min. The CE separation was performed in a fused-silica capillary with a 50 mm tris-(hydroxymethyl)-aminomethane buffer, pH 7, at an applied voltage of 20 kV, using barbital as internal stardard. The proposed methods are suitable for a reliable quantitation of these compounds in the commercial tablets and drops in terms of accuracy and precision and require a very simple pre-treatment of the samples. By comparing the performance characteristics and experimental details of the MLC and CE methods we conclude that CE seems to be slightly better than MLC in the determination of highly hydrophobic compounds in pharmaceuticals in terms of resolution and economy, taking into account that the limits of detection are not a handicap in pharmaceutical samples.     

毛细管电泳及其在朊病毒检测中的应用

本文简单介绍了毛细管电泳(CE)的发展前景,较详细地综述了毛细管电泳在朊病毒(PrPSc)检测方面的应用。CE作为1990年代末期发展最快的分析化学领域,已经在可传播性海绵状脑病(TSEs)的诊断检测方面显示了特有的优越性,成为目前唯一可以检测血中PrPSc的方法,为实现TSEs的生前诊断提供了新的思路。     

Recent advances in capillary electrophoresis/electrospray-mass spectrometry

In this review, the progress in hyphenation of capillary electrophoresis (CE) with electrospray ionization-mass spectrometry (ESI-MS) since the article of Banks (Banks, J. F., Electrophoresis 1997, 18, 2255-2266) is reported. In all capillary-based electromigration techniques, such as capillary gel electrophoresis (CGE), capillary isotachophoresis (CITP), capillary isoelectric focussing (CIEF), micellar electrokinetic chromatography (MEKC), affinity capillary electrophoresis (ACE), as well as in the hybrid techniques capillary electrochromatography (CEC), and pressurized capillary electrochromatography (pCEC) progress has been made in experimental setups, and for many groups of analytes, such as peptides, proteins, nucleotides, saccharides, drugs and their metabolites, CE/ESI-MS has been successfully applied. Electromigration is further miniaturized. New preconcentration methods allow the investigation of compounds, which are not sensitively detected with ESI-MS. Coordination ion spray (CIS) MS is another method for sensitivity enhancement by on-line formation of charged coordination compounds.     

Large Volume Sample Stacking (LVSS) in Capillary Electrophoresis (CE) with Response Surface Methodology (RSM) for the Determination of Phenolics in Food Samples

Abstract

A capillary electrophoresis method with large volume sample stacking (CE-LVSS) has been developed and validated for the simultaneous determination of seven phenolic compounds: naringin, rutin, carnosic acid, apigenin, quercetin, morin, and chichoric acid. Optimization was carried out by response surface methodology and a set of 20 experiments helped to optimize the parameters such as the concentration of buffer, buffer pH, and applied voltage. Analytes were separated using a 50?µm diameter capillary with 56?cm effective length and an extended light path using 20?mM borate buffer at pH 9.2. The LVSS method was optimized and a three- to fivefold improvement in detectability was achieved with injection at 100 mbar for 20?s followed by polarity switching at –20?kV for 6?s. The linearity values of all seven analytes were observed in the concentration ranges from 0.5 to 50?µg/mL for CE and 0.1 to 25?µg/mL for LVSS. The limits of detection were from 0.012 to 0.241 and 0.003 to 0.086?µg/mL for CE and LVSS. The obtained limits of quantitation were within 0.041 to 0.802 for CE and 0.012 to 0.286?µg/mL for LVSS. The recoveries were between 91.1 and 109.8% and 96.3 and 108.4% for CE and LVSS, respectively. The developed method has been successfully applied for the quantitative determination of analyzed components from food samples that are important sources of these compounds.