Structural distribution and rigidity of the glass network determined by EPR of Cu

The linewidth-broadening of the EPR spectra of Cu²⁺ in silicate, borate and phosphate glasses was analyzed in terms of the distribution of g_| and A_| (δ_| and δA_|) and related to the distribution of the rigidity of the network structure. X- and K-band spectra were measured for the glasses doped with ⁶³Cu²⁺ (93% abundance). The linewidth of the HFS shoulders with parallel orientation to H increased linearly with increasing m or microwave frequency. δg_| and δA_| showed a marked dependence on glass composition. For example, in Na₂O---B₂O₃ glasses, on going from x (mol% of Na₂O) being small through intermediate to large, δg_| varied from small through large to negligibly small. In contrast to these glasses δg_| was extremely large for 75PbO · 25B₂O₃ glass. The large δg_| for the Na₂O---B₂O₃ glassesof intermediate x was attributed to the coexistence of various borate groups competitively coordinating to Cu²⁺. Negligibly small δg_| for 70Na₂O · 30B₂O₃ glass and extremely large δg_| for 75PbO ·25B₂O₃ glass, both with a narrower structural distribution, reflect regidity of the glass network. The Pb---O bonding is strong enough to distort the coordination of Cu²⁺-complex. The situation is the reverse in Na₂O---B₂O₃ glasses.     

Diffraction studies of rare-earth phosphate glasses

A series of lanthanide oxides was incorporated in a vitreous phosphate host network. Molar constituents of the glasses were typically (La₂O₃)₁₀(R_xO_y)₁₀(Al₂O₃)₅(P₂O₅)₇₅. Each glass had a different lanthanide (R atom) from the series; La, Ce, Pr, Nd, Sm, Eu, Tb, Dy, Ho, Er and the values of x and y depended on the valency of the rare-earth atom. Both X-ray and neutron diffraction were employed in examining their structures. The results indicate that the basic PO₄ tetrahedral unit remains unaltered with an average P–O distance of and predominant Q² linkages to its neighbouring units so as to form a continuous network while accommodating the included lanthanides. In accordance with this model, the average distance of rare-earth (comprising La and a second type of R atom) to oxygen decreased from 2.44 to 2.26 , a trend to be expected from the lanthanide contraction. The average oxygen coordination around the rare-earth was found to vary in the range of 6–8. With these average parameters, a small (74 atom) hand-built model was made to check the feasibility of constructing a continuous random network. Optical transmission measurements show all these glasses to absorb strongly in the UV region and to have marked absorption resonances in the visible region of 400–1000 nm except for the La, Ce, Eu, Tb containing glasses which have low or negligible absorption in the latter range.     

Raman spectrum studies of the glasses in the system Na2O---Al2O3---P2O5

Raman spectra of ternary sodium aluminosphosphate glasses indicate that for glasses with Al₂O₃/P₂O₅<0.63, the glass network is mainly built up of (PO₃)_n^n- chains and rings or different kinds of phosphate groups and AlO₄ tetrahedra; for glasses with Al₂O₃/P₂O₅>0.63, the glass network is mainly built up of AlPO₄ groups.     

Porous glass-ceramics composed of a titanium phosphate crystal skeleton: A review

Bulk microporous glass-ceramics with a skeleton of two types of functional titanium phosphate crystal were prepared by controlled crystallization of RTi₂(PO₄)₃ (

Full-size image

glasses, and chemical treatment. One crystal is a NASICON-type with a three-dimensional network structure of TiO₆ and PO₄ while the other is a zirconium phosphate-type crystal Ti(HPO₄)₂ · 2H₂O with a two-dimensional layered structure. The mean pore diameter and porosity of 30–60 nm and 40–60 vol.% were achieved. Porous CaTi₄(PO₄)₆ glass-ceramics have excellent properties as supports for immobilization of enzymes, humidity sensors and porous LiTi₂(PO₄)₃ glass-ceramics as ion exchange media. Conspicuous bacteriostatic activities were found for the partially Ag-exchanged porous LiTi₂(PO₄)₃ and Li_1.4Ti_1.6Al_0.4(PO₄)₃. Integrated microporous glass-ceramics with skeletons of LiTi₂(PO₄)₃ (LTP) and Ti(HPO₄)₂ · 2H₂O (TP) crystals were synthesized utilizing a novel discovery that LTP is transformed into TP in acid solution.     

Effect of additives in the salt bath on glass strengthening

In this paper, we mainly study the effects of anion or anion group additives (such as the monovalent anions OH⁻, Cl⁻ or NO₃⁻, the divalent anion SO₄⁻, and the trivalent anion PO₄³⁻, respectively) in a salt bath of KNO₃ on glass strengthening. The Na₂O---Al₂O₃---SiO₂ system is selected to be the base glass.     

Chemical diffusion and crystalline nucleation during oxidation of ferrous iron-bearing magnesium aluminosilicate glass

Rutherford backscattering spectroscopy (RBS) and transmission electron microscopy (TEM) have been used to evaluate the mechanism and kinetics of oxidation of a Fe²⁺-doped MgO---Al₂O₃---SiO₂ glass (with nominal composition along the enstatite-cordierite-liquid divariant) which was heat treated in air under the time and temperature ranges 10–150 h and 700–800°C, respectively. The results clearly demonstrate that oxidation occurs by a cation diffusion process: specifically, the divalent cations diffuse from the interior of the glass to the free surface where they subsequently react with environmental oxygen to form a two-phase, MgO---(Mg, Fe)₃O₄ crystalline layer which covers the (divalent cation-depleted) glass. Oxidation of some Fe²⁺ within the glass occurs via the inward flux of electron holes (a counterflux to the divalent cation diffusion required to maintain charge neutrality of the glass); this internal oxidation results in the fine-scale ( 1–5 nm), homogeneous nucleation of crystalline (Mg, Fe)₃O₄ within the divalent cation-depleted layer of the glass. Chemical diffusion of an oxygen species is thus demonstrated to be a slower, parallel kinetic process which is not required for oxidation to occur in this material. A first-order analysis of oxidation kinetics in the glass is presented.     

An infrared study of crystallization in sodium-disilicate glasses containing iron oxides

The infrared absorption spectra of sodium-disilicate glasses containing various amounts of Fe₂O₃ ([Na₂O · 2 SiO₂]_1−x [Fe₂O₃]_x, where X = 0.05, 0.1 and 0.2) were investigated in the wavenumber range from 200–2000 cm⁻¹. The addition of Fe₂O₃ to the sodium-disilicate glass does not seem to introduce any new absorption band as compared with the spectrum of a pure sodium-disilicate glass; nevertheless, a general shift of the existing absorption bands toward lower wavenumbers is observed. The amount of shift is, in fact, proportional to the content of Fe₂O₃ in the glass. This observation is consistent with the recently proposed structural model for the bonding of Fe³⁺ ions in the iron-sodium-silicate glass system.

Annealing of 20 mol% iron oxide glasses at 550 and 580°C produced an extra sharp infrared absorption peak at about 610 cm⁻¹ wavenumber. This new peak is believed to be related to the crystallized particles of the glass as concluded from both a scanning electron micrograph and an electron diffraction pattern.     

A glass-forming system with compound-forming tendency: As4S6---P4S10

Glasses in the quasi-binary system (As₄S₆)_x(P₄S₁₀)_1−x x = 0.1, …, 1.0, are produced and studied by thermal analysis, X-ray, and Raman spectroscopy. The phase diagram of the system and the critical cooling rate for glass formation both have their maximum at x = 0.5, corresponding to the compound As₂P₂S₈; the X-ray structure of recrystallized samples can be described as a sum of the As₂P₂S₈ (x = 0.5)- and the P₄S₁₀-structure (As₄S₆ not visible); Raman spectra of the glasses are again sums of As₂P₂S₈- and As₄S₆/P₄S₁₀-spectra. All these observations support the assumption that a stable building block corresponding to the 1:1 compound As₂P₂S₈ and surplus As₄S₆ (or P₄₁₀) are the essential elements of the structure in the glasses.     

The effect of hydrostatic pressure on the dielectric constants, and their temperature dependences, of phosphate and tellurite glasses

Measurements of the pressure dependence of the static dielectric constant of tellurite (pure TeO₂ and 67%TeO₂ + 33%WO₃) and samarium phosphate (5%Sm₂O₃ + 95%P₂O₅ and 15%Sm₂O₃ + 85%P₂O₅) glasses at elevated pressures (0–70 kbar) for a range of temperatures (77–380 K) are reported. The electrical properties under pressure have been determined from the low-frequency complex plane analysis of glass discs contained within a Bridgman opposed anvil cell. The most notable observation is that the pressure dependence of the static dielectric constant, of all glasses studied, is positive, for example for vitreous TeO₂ ln ε/P is equal to 4.41 × 10⁻¹¹ (Pa⁻¹) at 293 K. Behaviour of this type is common to a number of materials (plastics and chalcogenide glasses) for which it is not possible to define any long-range order. It is in direct contrast with the behaviour of crystalline insulators, for which ε/P is usually negative. The effect of pressure on the dielectric constant has been analysed using two different approaches based on the macroscopic Clausius-Mossotti equation. The effects of high pressure on the dielectric constant have been correlated with the temperature dependence of the dielectric constant at atmospheric pressure.     

Eu:Lu2O3透明闪烁陶瓷的制备与性能

采用湿化学法合成了Eu原子掺量5%的Lu₂O₃陶瓷前驱体,通过SEM、XRD研究了煅烧前后前驱体和1 100 ℃煅烧4 h后粉体的形貌、结构以及物相。结果表明煅烧后的粉体为纳米类球形、高分散且结晶性良好的颗粒。颗粒尺寸为68.5 nm。使用煅烧后的粉体为原料,在1 650 ℃真空烧结30 h制备了高透过率的Eu:Lu₂O₃陶瓷,晶粒尺寸为46 μm,在611 nm处的直线透过率可以达到66.3%。此外对陶瓷的吸收曲线、光致激发和发射光谱特性以及X射线激发发射光谱进行研究。可观察到,Eu:Lu₂O₃陶瓷存在基质和激活离子两类吸收,光致发光光谱和X射线激发发射光谱均可以看出Eu:Lu₂O₃陶瓷存在极强的⁵D₀→⁷F₂跃迁发光,位于611 nm处。对比商业的BGO单晶的X射线发射光谱,可得本实验中制备的陶瓷的光输出为85 000 ph/MeV。Eu:Lu₂O₃陶瓷本身有着高X射线以及高能粒子的阻止能力,结合高光输出特性,表明Eu:Lu₂O₃陶瓷在X射线成像等领域具有巨大的潜在应用价值。     

B NMR investigations in xV2O5–B2O3 and xV2O5–B2O3–PbO glasses

11B (I=3/2) MAS NMR in the binary glass system xV₂O₅–B₂O₃ (x=0.053, 0.43) and the ternary glass system xV₂O₅–B₂O₃–PbO (0.1x1.5) has been investigated at room temperature. In the xV₂O₅–B₂O₃ glasses, one NMR line due to BO₃ unit was observed. Meanwhile in the xV₂O₅–B₂O₃–PbO, two NMR lines which arise from BO₃ and BO₄ units were detected, where the appearance of BO₄ units is produced by the presence of PbO. From the computer-simulation of the ¹¹B NMR central transition line (m=−1/2↔1/2), the quadrupole parameters (e²qQ/h and η) for BO₃ units in xV₂O₅–B₂O₃, and those for BO₃ and BO₄ units in xV₂O₅–B₂O₃–PbO were obtained as a function of x. As the V₂O₅ content increases in xV₂O₅–B₂O₃–PbO, the e²qQ/h and η values of the BO₃⁻ associated resonance are found to slightly decrease and increase, respectively. Meanwhile, the e²qQ/h and η values of BO₄⁻ associated resonance in xV₂O₅–B₂O₃–PbO are found to slightly increase and decrease, respectively. By comparing the intensities of the total transitions (m=−3/2↔−1/2,m=−1/2↔1/2, and 1/2↔3/2) for the ¹¹B NMR line of BO₃ and BO₄ units contained in xV₂O₅–B₂O₃–PbO with those of respective standard samples of 0.053V₂O₅–B₂O₃ and NaBH₄, the quantitative fractions of BO₃ and BO₄ in xV₂O₅–B₂O₃–PbO were obtained as a function of x.     

Photoinduced structural changes in antimony polyphosphate based glasses

A photocontraction effect in amorphous films of the binary glass system 0.20 [Sb(PO₃)₃]_n–0.80 Sb₂O₃ has been observed after UV irradiation using the 350.7 nm Kr⁺ ion laser line with 5.0 W/cm². Good optical quality films up to 4.0 μm were deposited on silica substrates at room temperature in vacuum by electron beam physical vapor deposition (EB-PVD) and characterized using WDX, XRD, optical absorption, infrared reflectance, profilometry and atomic force microscopy (AFM) techniques. Very stable glasses were prepared by the melt quenching technique and used as evaporation source for the production of films. The photoinduced structural change (PSC) was observed as a variation of about 6% in the film thickness and this effect is accompanied by a photobleaching of the irradiated area with a blue shift of the optical absorption edge. Otherwise this photoinduced change in the film thickness is very sensitive to the variations in the shape and intensity of the laser beam; therefore several possibilities in optical recording arise from these results.     

Properties of ZrO2---Al2O3 composite powders prepared from Zr---Al metallo-organic compounds

Zr---Al metallo-organic compounds (zircoaluminates), having (CH₂)₄COOH, (CH₂)₁₂CH₃ and (CH₂)₂NH₂ as the organofunctional groups, were treated preliminary by (1) spray-drying, (2) gelation of addition of 10% NH₄OH aqueous solution followed by spray-drying and (3) rotary evaporation under a reduced pressure. After the treatment they were heated in air to prepare ZrO₂---Al₂O₃ composite powders. The IR and DTA profiles for the treated compounds indicated that the procedures modified the structures for the zircoaluminates. The stability of tetragonal ZrO₂ for the ZrO₂---Al₂O₃ composite powder were dependent on the modification in the structure for the zircoaluminates. Balloon shaped particles, 0.5–2 μm in diameter, were obtained through procedure (1) and spherical particles, 1–4 μm in diameter, through (2). Tetragonal ZrO₂ grains, 0.1–0.2 μm in diameter, were dispersed in the particles when heated at 1400°C.     

Calculation of NMR shieldings and other properties for three and five coordinate Si, three coordinate O and some siloxane and boroxol ring compounds

Valuable information on the geometric and electronic structure of both predominant and defect species in the bulk and on the surface of amorphous SiO₂ can be obtained from solid state ²⁹Si and ¹⁷O NMR. Most previous NMR.studies have made assignments of structure types to NMR signals by relying on a comparison to crystalline reference materials. Using the quantum mechanical technique of Coupled Hartree-Fock Perturbation Theory (CHFPT) we can directly calculate NMR shielding tensors, σ, for Si and O and electric field gradients tensors, q for O in silicates. Previous CHFPT calculations on (SiH₃)₂O at Si---O---Si = 180° to 140° semiquantitatively reproduced observed trends in σ for SiO₂ polymorphs. These calculations have been improved and extended to Si---O---Si = 120° in (SiH₃)₂O and to the small siloxane rings H₄Si₂O₂, H₆Si₃O₃, H₈,Si₄O₄ which are models for the ring structures which may occur in the bulk and surface of amorphous SiO₂. Thus, predictions can be made of the ¹⁷O and ²⁹Si NMR characteristic of such species. We have also calculated NMR shieldings and other properties for three and five coordinate Si and for three coordinate O. The ²⁹Si NMR shielding increases with coordination, as expected, and five coordinate Si shows an anisotropy which although large is still smaller than that inferred from spin-lattice relaxation times in silicate melts. O q values are also calculated for (BH₂)₂O and H₃B₃O₆. The results are consistent with O EFGs and Raman frequencies observed in B₂O₃ glass, supporting a boroxol ring model.     

Study of electrical properties of MoO3–Fe2O3–P2O5 and SrO–Fe2O3–P2O5 glasses by impedance spectroscopy. II

The electrical and dielectric properties for three series of MoO₃–Fe₂O₃–P₂O₅ and one series of SrO–Fe₂O₃–P₂O₅ glasses were measured by impedance spectroscopy in the frequency range from 0.01 Hz to 3 MHz and over the temperature range from 303 to 473 K. It was shown in Part I that the MoO₃ is incorporated into phosphate network and the structure/properties are strongly influenced by the overall O/P ratio. The Fe₂O₃ content and Fe(II)/Fe_tot ratio in these glasses have significant effects on the electrical conductivity and dielectric permittivity. With decreasing Fe₂O₃ content in MoO₃–Fe₂O₃–P₂O₅ glasses with O/P at 3.5 the dc conductivity, σ_dc(ω) decreases for two orders of magnitude, which indicates that the conductivity for these glasses depends on Fe₂O₃ and is independent of the MoO₃ content. Also, the dielectric properties such as ^′(ω), ^″(ω) and σ_ac(ω) and their variation with frequency and temperature indicates a decrease in relaxation intensity with increase in the concentration of MoO₃. On the other hand, the dc conductivity for MoO₃–Fe₂O₃–P₂O₅ glasses with O/P > 3.5 increases with the substitution of MoO₃ which has been explained by an increase in the number of non-bridging oxygens and formation of Fe–O–P bonds that are responsible for formation of small polarons. The increase in the dielectric permittivity, ^′(ω) with increasing MoO₃ content is attributed to the increase in the deformation of glass network with increasing bonding defects. For SrO–Fe₂O₃–P₂O₅ glasses the conductivity and dielectric permittivity remained constant with increasing SrO.     

Vibrational and structural properties of glass and crystalline phases of TeO2

A wide-spread opinion regarding the paratellurite (-TeO₂) lattice as a parent structure of TeO₂ glass is questioned. Consequently, the Raman and infrared spectra of TeO₂ glass are contrasted with those of three crystalline lattices (, β, γ) of TeO₂ and their vibrational state density distribution functions. Additionally, the data on the crystallization of the liquid and glassy states of TeO₂ are considered. As a result, of the known crystalline phases of TeO₂, the γ-phase is proposed as the closest to TeO₂ glass.     

ZrO2对Ho∶(Y0.7Sc0.3)2O3激光陶瓷致密化和光学性能的影响

2 μm 波段处于人眼安全波长,在医疗、加工、红外探测与对抗,以及大气环境监测等军、民两用领域有着重要潜在和实际应用。Ho³⁺掺杂倍半氧化物陶瓷具有宽的吸收和发射光谱、高热导率以及低声子能量等优点,是一类重要的 2 μm 波段激光材料。通过材料固溶原理,可以实现光谱更加宽化,这使其有可能成为一类性能优异的中红外固体激光材料。本文以商业Y₂O₃、Sc₂O₃以及Ho₂O₃粉体为原料,添加少量ZrO₂(原子比为0~1.0%)作为烧结助剂,采用真空预烧,结合热等静压烧结的工艺,成功制备出高透明的0.5%Ho∶(Y_0.7Sc_0.3)₂O₃陶瓷。研究了ZrO₂掺杂浓度(0~1.0％)对Ho∶(Y_0.7Sc_0.3)₂O₃激光陶瓷致密化过程和光学性能的影响。通过添加ZrO₂有效抑制了高温下Ho∶(Y_0.7Sc_0.3)₂O₃陶瓷晶粒的生长,掺杂1.0％ZrO₂的Ho∶(Y_0.7Sc_0.3)₂O₃陶瓷经1 690 ℃下真空预烧结4 h和1 600 ℃/190 MPa热等静压烧结3 h后,其透过率在1 100 nm处达到79.1％(厚度为4.4 mm),接近理论透过率。     

纳米氧化镱对熔融石英析晶动力学机制的影响

本文研究引入纳米氧化镱对熔融石英析晶机制及动力学过程的影响.通过X射线衍射仪(XRD)测试结果分析了纳米氧化镱的引入对熔融石英陶瓷析晶率的影响,采用动力学方法分析了纳米氧化镱的引入对熔融石英陶瓷析晶机制的影响,同时探讨了其等温析晶动力学过程.研究表明,熔融石英陶瓷的晶粒向二维兼有一维及三维的方式生长,引入纳米氧化镱的熔...     

Hydration of phosphate and borate glasses in an autoclave

Kinetics of hydration of CaO---Al₂O₃---P₂O₅ and Na₂O---CaO---B₂O₃---Al₂O₃ glasses in an autoclave at high temperatures and high pressures has been investigated. The hydration of the phosphate glasses may occur as a result of hydrolysis of glass constituents to form orthophosphate crystals. Cabal glasses which do not contain any alkali oxides have shown a quite high resistance to water. Substitution of sodium for calcium deteriorates the chemical durability of Cabal glasses.     

Growth and spectral properties of Nd:LaVO4 crystal

This paper reports the growth and spectral properties of 3.5 at% Nd³⁺:LaVO₄ crystal with diameter of 20×15 mm² which has been grown by the Czochralski method. The spectral parameters were calculated based on Judd–Ofelt theory. The intensity parameters Ω_λ are: Ω₂=2.102×10⁻²⁰ cm², Ω₄=3.871×10⁻²⁰ cm², Ω₆=3.235×10⁻²⁰ cm². The radiative lifetime τ_r is 209 μs and calculated fluorescence branch ratios are: β₁(0.88μm)=45.2, β₂(1.06μm)=46.7, β₃(1.34μm)=8.1. The measured fluorescence lifetime τ_f is 137 μm and the quantum efficiency η is 65.6%. The absorption band at 808 nm wavelength has an FWHM of 20 nm. The absorption and emission cross sections are 3×10⁻²⁰ and 6.13×10⁻²⁰ cm², respectively.