纳米金自组装膜的IgM压电免疫传感器的研究

利用等离子体聚合膜沉积技术和纳米金亚单层自组装技术设计传感器界面，用 于固定羊抗人M抗体，研制了一种新的M压电免疫传感器．先在石英品振上沉积正丁 胺等离子体聚合膜，通过戊二醛交联结合一半肮胺单层膜，利用膜上流基与纳米金 键合组装纳米金亚单层，得到可用于固定18kI抗体的界面，再以牛血清白蛋白 (BSA)和聚乙二醇(PEG)封闭晶振上的非特异性吸附位点．实验探讨了影响纳米金自 组装和抗体包被等主要实验参数和条件；考察了采用此固定化方法传感器的响应性 能，与戊二醛共价交联固定法和金电极表面直接吸附固定法进行了比较．结果表明 ，以纳米金单层作界面固定抗体时，具有传感界面不需活化、固定抗体的活性高、 检测时的非特异性吸附小、传感器能反复再生等优点．将传感器用于实际样品的检 测，结果令人满意．     

基于纳米金/硫堇层层自组装的新型电流型酶-癌胚抗原免疫传感器

将Nafion 膜固定在金电极(Au)表面, 通过静电吸附和共价键合作用将硫堇(Thi)和纳米金颗粒(nano-Au)层层自组装到Nafion膜修饰的金电极表面. 再通过形成的纳米金单层吸附癌胚抗体(anti-CEA), 最后用辣根过氧化物酶(HRP)代替牛血清白蛋白(BSA)封闭电极上的非特异性吸附位点, 并同时起到放大响应电流信号的作用, 从而制得高灵敏、高稳定电流型酶-癌胚抗原(CEA)免疫传感器. 通过循环伏安和交流阻抗考察了电极表面的电化学特性, 并对该免疫传感器的性能进行了详细的研究. 该传感器对CEA检测的线性范围为2.5~80.0 ng/mL, 检测限为0.90 ng/mL.     

基于网状混合自组装膜的压电免疫传感器及其应用

结合纳米金及混合自组装技术, 制备了一种新型网状混合膜, 提出了一种新的生物分子固定化方法, 研制了一种用于检测人血清抗精子抗体的压电免疫传感器. 首先, 将纳米金溶胶、巯基丙酸和1,6-二巯基己烷按一定的比例混合制得网状混合自组装膜, 然后将此膜组装到压电石英晶振的金电极表面, 经EDC/NHS活化后, 再将抗原固定到电极上, 实现对抗精子抗体的检测. 结果表明, 该方法能明显提高抗体抗原结合效率, 从而提高传感器的灵敏度, 并降低传感界面的非特异性吸附. 将此传感器应用于人血清抗精子抗体的检测, 线性范围为10~800 mU/mL, 检出限为7 mU/mL. 此传感器为抗精子抗体的临床检测提供了新平台.     

基于电聚合膜和纳米金自组装的生物分子固定化新方法的研究

结合电聚合膜和纳米金自组装技术,提出了一种新的生物分子固定化方法,研制成一种检测抗胰蛋白酶的压电免疫传感器。通过在石英晶振金电极表面电聚合邻苯二胺膜,再在膜表面自组装一层纳米金粒．以静电吸附作用固定抗体(抗原),实现对相应抗原(抗体)的检测。利用扫描电镜技术,从形态上考察了晶振金电极上自组装纳米金后的表面形貌。研究了抗体的固定化条件,探讨了传感器的响应与再生性能结果表日月．这种固定化方法对所固定的生物分子的生物活性影响小,传感器的测定灵敏度高．响应性能和再生性能较好。     

抗体和寡核苷酸双标记纳米金生物探针的制备及生物学特性

纳米金通过静电吸附抗体, 与寡核苷酸共价结合制备双标记纳米金生物探针, 比较了双标记纳米金生物探针和单标记抗体IgG或ss-DNA的稳定性和反应性. 结果表明, 在水溶液中纳米金由于ss-DNA的结合使IgG抗体的吸附能力明显改善, IgG的吸附也影响二硫苏糖醇(DDT)对ss-DNA的解离作用. 双标记纳米粒上覆盖(50±15)条ss-DNA和(10±2)条IgG, 较单标记ss-DNA纳米金上的(70±15)条要少. 斑点免疫和杂交实验证明, 纳米金表面标记的IgG和ss-DNA具有良好生物学活性. 双标记纳米金生物探针在超微量蛋白质的检测中具有应用价值.     

基于纳米金／壳聚糖掺杂碳纳米管修饰金电极非标记免疫传感器的研究

应用吸附法将羊抗人IgG抗体直接固定于纳米金(GNPs)/壳聚糖(Chit)掺杂碳纳米管(CNTs)修饰的金电极表面,制备了用于人IgG抗原检测的非标记电化学免疫传感器.利用循环伏安法和交流阻抗研究了修饰电极表面的电化学特性,用差分脉冲伏安法研究了测试底液的pH值对免疫传感器性能的影响.实验表明,在含不同浓度人IgG的...     

基于巯基和聚电解质双层自组装膜的压电免疫传感器检测小鼠IgG气溶胶

本文结合自组装单分子层膜(SAMs)和聚电解质静电吸附组装技术,提出了一种新的用于气相压电免疫检测的生物分子固定化方法,研制了一种用于检测小鼠IgG抗体的压电免疫传感器。首先在石英晶片的金电极表面自组装了一层L-胱氨酸SAMs,再在膜上组装带相反电荷的海藻酸钠,最后通过调节pH值定向固定羊抗鼠纯化抗体,优化了固定条件。通过超声雾化法产生的小鼠IgG气溶胶,研制成了直接气相检测小鼠IgG的压电免疫系统。结果表明,该方法对所固定的生物分子活性影响较小,传感器对小鼠IgG的响应快,灵敏度高,在0.14~6μg.μL-1范围内具有良好的线性关系,精密度好,再生方便。     

电化学聚合吡咯掺杂蛋白A固定抗体的安培型沙门氏菌微传感器

基于电化学聚合将蛋白A(staphylococcal protein A)与吡咯掺杂后共聚于电极表面的新方法设计传感界面,结合采用微机电系统(micro electro mechanical systems, MEMS)技术制备的两电极系统,开发了一种新型的利用电聚合引入蛋白A进而固定抗体、提高检测性能的安培型免疫微传感器,并应用于沙门氏菌(Salmonella typhimurium, S.typhi)的检测.考察了传感器检测沙门氏菌的响应特性,优化了相关实验条件及参数,并结合扫描电镜(scanning electron microscopy,SEM)图像验证了该抗体固定方法的有效性.实验表明,采用电化学聚合方法固定蛋白A进行敏感膜修饰,操作简便省时(<10 min)、可控性强,试剂用量少(10 μL),能够有效改善抗体固定效果,提高传感器检测性能,适于微型免疫传感器的表面修饰研究.以此设计的安培型免疫微传感器能够检测100 cfu/mL沙门氏菌溶液,具有良好的重复性和特异性.     

二维纳米金单层膜的构建及其生物电化学应用

利用Langmuir-Blodgett (LB)技术在氧化铟锡(ITO)电极上制备了二维纳米金(nano-Au)单层膜,采用扫描电子显微镜表征了二维纳米金单层膜.实验结果表明:表面压为28 mN/m时,可获得分散性好、形状规则且分布均匀的二维球形纳米金单层膜.利用LB技术制备了肌红蛋白(Mb)薄膜,并将其固定在二维纳米金单层膜修饰的电极表面,研究了肌红蛋白LB膜的直接电化学行为.结果表明:纳米金粒子能够有效地加速肌红蛋白的电子转移,其电子转移速率为1.415 s-1.     

自组装夹心式功能化碳纳米管复合材料构建电流型甲胎蛋白免疫传感器的研究

在玻碳电极表面自组装一种夹心式的功能化碳纳米管复合膜,即首先在玻碳电极表面滴涂一层Na-fion分散的多壁碳纳米管,通过离子交换作用吸附硫堇分子后,利用硫堇分子与金纳米颗粒之间的共价键合作用组装一层金纳米颗粒功能化的多壁碳纳米管,双重增大电极比表面积,提高抗体固载量的同时可进一步提高电子传递速率,以此为甲胎蛋白抗体的固定化基质,制得电流型甲胎蛋白免疫传感器.实验结果表明,用此夹心式自组装膜固载抗体蛋白分子制得的电流型甲胎蛋白免疫传感器具有高的灵敏度和良好的选择性,检出限(S/N=3)为0.12 ng·mL-1.     

Double‐Layer Nanogold and Double‐Strand DNA‐Modified Electrode for Electrochemical Immunoassay of Cancer Antigen 15‐3

Various sensor‐based immunoassay methods have been extensively developed for the detection of cancer antigen 15‐3 (CA 15‐3), but most often exhibit low detection signals and low detection sensitivity, and are unsuitable for routine use. The aim of this work is to develop a simple and sensitive electrochemical immunoassay for CA 15‐3 in human serum by using nanogold and DNA‐modified immunosensors. Prussian blue (PB), as a good mediator, was initially electrodeposited on a gold electrode surface, then double‐layer nanogold particles and double‐strand DNA (dsDNA) with the sandwich‐type architecture were constructed on the PB‐modified surface in turn, and then anti‐CA 15‐3 antibodies were adsorbed onto the surface of nanogold particles. The double‐layer nanogold particles provided a good microenvironment for the immobilization of biomolecules. The presence of dsDNA enhanced the surface coverage of protein, and improved the sensitivity of the immunosensor. The performance and factors influencing the performance of the immunosensor were evaluated. Under optimal conditions, the proposed immunosensor exhibited a wide linear range from 1.0 to 240 ng/mL with a relatively low detection limit of 0.6 ng/mL (S/N=3) towards CA 15‐3. The stability, reproducibility and precision of the as‐prepared immunosensor were acceptable. 57 serum specimens were assayed by the developed immunosensor and standard enzyme‐linked immunosorbent assay (ELISA), respectively, and the results obtained were almost consistent. More importantly, the proposed methodology could be further developed for the immobilization of other proteins and biocompounds.     

A novel biosensing interfacial design based on the assembled multilayers of the oppositely charged polyelectrolytes

A novel biosensing interfacial design strategy has been produced by the alternate adsorption of the oppositely charged polyelectrolytes. A quartz-crystal microbalance (QCM) as a model transducer was modified by use of mercaptoacetic acid (MAA) self-assembled monolayer (SAM) and the adsorption multilayers of the oppositely charged polyelectrolytes. MAA-SAM was first applied to the gold electrode surface of the crystal, and the positively charged chitosan was used as a double-sided linker to attach the negatively charged alginate-HSA antibodies to the negatively charged MAA-SAM layer. The assembly process and conditions were studied using the real-time output device and the surface topologies of the resulting crystals were characterized by atomic force microscopy (AFM) imaging. It is discovered that the optimal pH of immobilizing antibodies was 7.2 and the suited dilution ratio of antibodies was 10:30. The proposed immunosensor in optimal conditions has a linear detection range of 12.3-184.5 μg/mL for HSA detection. Comparing with the direct immobilization method of antibodies, the immunosensor with the proposed immobilization procedure shows some advantages, such as improved sensitivity due to the well-retained antibody activity and the significantly extended detection range. In particular, the regeneration of the developed immunosensor was simple and fast. Analytical results indicate that the developed immobilization procedure is a promising alternative for the immobilization of biorecognition element on the electrode surface.     

A piezoelectric immunoassay based on self-assembled monolayers of cystamine and polystyrene sulfonate for determination of Schistosoma japonicum antibodies

A piezoelectric immunosensor based on an improved immobilization strategy combining self-assembled monolayers (SAM) of cystamine (Cys) and polystyrene sulfonate (PSS) has been developed for the determination of Schistosoma japonicum antibodies (SjAb) in rabbit serum. Cys SAM were first applied to the gold electrode surface of the crystal, serving as a positively-charged base. Schistosoma japonicum antigen (SjAg) was then electrostatically immobilized on the crystal by means of a negatively-charged PSS layer. When sealed by use of an appropriately selected blocking reagent for BSA and normal rabbit serum (NRS), non-specific adsorption could be substantially reduced.The immunosensor was used to determine SjAb in optimized buffer medium with addition of poly(ethylene glycol) (PEG), which served as an immunoreaction enhancer. It was shown experimentally that SjAg immobilized by the Cys-PSS adsorption procedure had higher immunological activity or binding efficiency than those immobilized by the glutaraldehyde (GLU) binding or direct attachment procedures. The immunosensor developed had satisfactory sensitivity and detection limit, and regeneration of the piezoelectric quartz-crystal was easy. Analytical results obtained with infected rabbit serum samples indicated that the proposed immunosensor is a promising alternative for qualitative and quantitative determination of SjAb in clinical diagnosis of infection with Schistosoma japonicum.     

Double‐Layer Nanogold and Poly(amidoamine) Dendrimer‐ Functionalized PVC Membrane Electrode for Enhanced Electrochemical Immunoassay of Total Prostate Specific Antigen

A simple and portable electrochemical immunosensor for the detection of total prostate specific antigen (t‐PSA) in human serum was developed using a double‐layer nanogold particles and dendrimer‐functionalized polyvinyl chloride (PVC) membrane as immunosensing interface. To fabricate such a multifunctional PVC electrode, an o‐phenylenediamine‐doped PVC membrane was initially constructed, then nanogold particles and poly(amidoamine) G4‐dendrimer with a sandwich‐type format were assembled onto the PVC membrane surface, and then t‐PSA antibodies (anti‐PSA) were adsorbed on the nanogold surface. The detection principle of the immunosensor is based on the change in the electric potential before and after the antigen‐antibody interaction. The experimental conditions and the factors influencing the performance of the immunosensor were investigated. Under optimal conditions, the proposed immunosensor exhibits good electrochemical behavior in the dynamic range of 0.5–18 ng/mL relative to t‐PSA concentration with a relative low detection limit of 0.1 ng/mL (S/N=3). The precision, reproducibility, and stability of the immunosensor are acceptable. In addition, 43 serum specimens were assayed by the as‐prepared immunosensor, and consistent results were obtained in comparison with those obtained by the standard enzyme‐linked immunosorbent assay (ELISA). Compared with the conventional ELISAs, the developed immunoassay system was simple and rapid without labeling and separation steps. Importantly, the immobilization and detection methodologies could be extended for the immobilization and detection of other biomarkers.     

FET immunosensor for hemoglobin A1c using a gold nanofilm grown by a seed-mediated technique and covered with mixed self-assembled monolayers

A micro FET-based immunosensor was developed for the determination of hemoglobin-A1c (HbA1c). The HbA1c/hemoglobin ratio is an important index in diabetes control. The sensor was fabricated by Complementary Metal-Oxide-Semiconductor Transistor (CMOS) and Micro Electronic Mechanical System (MEMS) techniques. The antibodies were immobilized via mixed self-assembled monolayers (SAMs) on a gold nanofilm. The nanofilm was deposited on a gold electrode by seed-mediated growth and gave a uniform and well distributed coverage. Nonspecific sites and interferences by noise were eliminated by covering the AuNPs with mixed SAMs. Compared to the immunosensor fabricated via the mixed SAMs method without gold nanofilm, the immunosensor displays a more than 2-fold sensitivity. The immunosensor is capable of detecting HbA1c and hemoglobin in hemolyzed and diluted whole blood, and results showed good agreement with the established clinical method.

基于酪胺信号放大的新型免疫传感器

将酪胺应用于酶联免疫分析,建立了一种新的高灵敏伏安型免疫传感器。利用纳米金的静电吸咐和己二硫醇、巯基乙胺的自组装,将羊抗人IgG抗体固定到金电极表面上,以辣根过氧化物酶标记羊抗人IgG抗体为酶标抗体,以生物素化酪胺为酶底物,利用催化酪胺沉积反应,在传感界面沉积大量生物素,使原始信号得到几何级数的放大。结果表明,通过生物素化酪胺催化放大后,制得的免疫传感器对H2O2的催化能力增大近20倍,检测hIgG在1.5μg/L～22 mg/L范围内有良好的线性关系,检出限为0.1μg/L。用于实际试样的回收率的测定,结果良好。     

A novel capacitive immunosensor based on gold colloid monolayers associated with a sol-gel matrix

A capacitive sensing method based on self-assembling gold nanoparticles to the surface of the sol-gel modified electrode has been developed for the direct detection of the human IgG in human serum. The capacitance of the immunosensor corresponding to the concentration of human IgG is investigated by alternating current impedance. The formed mercaptopropyltriethoxysilane (MPTS) film is ultrathin; the immobilization density of antibodies is high because of high surface-volume area of the assembled gold nanoparticles and the biological macromolecules when immobilized on gold nanoparticles can retain their bioactivity. This capacitive immunosensor prepared with present method can provide high sensitivity. The linear calibration curve was obtained in the range 8.3-2128 ng/ml, with a detection limit of 3.3 ng/ml when plotted versus the logarithm of the antigen concentration. After each immunoassay, the regeneration of the electrode could be performed through washing in basic solution without obvious decrease in response. No cross-reactivity was observed with other protein species. The dependence of sol-gel modified electrode stability on the pH value and ion strength was studied. The insulating properties of the different layers of the immunosensor were also investigated.     

Study on the immobilization of anti-IgG on Au-colloid modified gold electrode via potentiometric immunosensor, cyclic voltammetry, and electrochemical impedance techniques

The immobilization of anti-IgG on Au-colloid modified gold electrodes has been investigated. A cleaned gold electrode was first immersed in a mercaptoethylamine (AET) solution, and then gold nanoparticles were chemisorbed onto the thiol groups of the mercaptoethylamine. Finally, anti-IgG was adsorbed onto the surface of the gold nanoparticles. Potentiometric immunosensor, cyclic voltammetry, and electrochemical impedance techniques were used to investigate the immobilization of anti-IgG on Au colloids. In the impedance spectroscopic study, an obvious difference of the electron transfer resistance between the Au-colloid modified electrode and the bare gold electrode was observed. The cyclic voltammogram tends to be more irreversible with increased anti-IgG concentration. Using the potentiometric immunosensor, the proposed technique is based on that the specific agglutination of antibody-coated gold nanoparticles, averaging 16 nm in diameter, in the presence of the corresponding antigen causes a potential change that is monitored by a potentiometry. It is found that the developed immunoagglutination assay system is sensitive to the concentration of IgG antigen as low as 12 ng mL(-1). Experimental results showed that the developed technique is in satisfactory agreement with the ELISA method, and that gold nanoparticles can be used as a biocompatible matrix for antibody or antigen immobilization.