HLS储存环束流发射度研究

 研究了合肥光源(HLS)储存环束流发射度与其长直线节消色散条件之间的关系；在考虑到H函数的匹配时，计算了储存环最低束流发射度；为光源多种运行模式提供了理论依据。     

合肥光源高亮度模式Lattice设计

介绍了一组合肥光源新高亮度模式的Lattice. 新的设计维持了储存环上所有元件和光束线位置不变,也没有加入新的元件. 取得了较低发射度. 所有直线节处的垂直方向β函数值都很小，适合插入件的运行. 跟踪计算表明新Lattice具有足够大的动力学孔径用于注入和储存粒子.     

合肥先进光源储存环初步物理设计

我国最近立项建设的合肥先进光源将是一台软X射线与真空紫外衍射极限储存环光源,其电子束能量为2.2 GeV,周长为480 m,束流自然发射度为86 pm·rad,共有20个长直线节和20个短直线节。介绍了目前合肥先进光源储存环物理设计的进展情况,包括磁聚焦结构设计与优化,束流注入和集体效应的模拟与计算。     

高能光源增强器束流横向尺寸测量系统设计

高能同步辐射光源的增强器将直线加速器注入的束流加速到储存环所需的能量,为储存环提供高品质的电子束。为了对增强器的束流横向截面尺寸、发射度及能散进行测量,设计了两条可见光-紫外波段的束测光束线。两条光束线分别选取无色散和色散较大的两处弯铁位置作为光源点,使用两套同步光成像系统来监测光源点的束流截面尺寸,并计算束流发射度及能散。介绍了同步光引出真空室及光学成像系统,对影响成像质量的空间分辨率进行了分析,并针对升能过程中不同能量下束流光斑变化的测量进行了设计。     

储存环聚焦结构设计中的比例定律

阐述并证明了储存环聚焦结构设计中的比例定律.即储存环的尺寸按一定比例放大或缩小时,可以保持工作点和束流发射度不变; 介诸存环的能量改变时,其束流发射度将会随能量的平方变化.     

上海光源储存环束流托歇克寿命研究

上海同步辐射装置(SSRF)是目前在建的第3代专用同步辐射光源. 其储存环电子能量3.5GeV, 设计束团发射度3.9nm•rad. 托歇克寿命将是影响束流寿命的最主要因素, 它主要受限于储存环的能量接受度. 储存环的能量接受度不但取决于 高频电压, 同时也受动力学孔径和物理孔径的影响. 因此能量接受度的计算将是复杂的. 通过计算机模拟跟踪的方法计算储存环各点的能量接受度, 其程序是建立在Accelerator Toolbox(AT)基础上的自编程序. 通过这些能量接受度数据给出更加准确的托歇克寿命, 并且分析了感兴趣的不同运行条件下的托歇克寿命的变化情况.     

束内散射效应下HALF储存环物理参数的优化设计

合肥先进光源（HALF）是我国规划建设的软X射线与VUV衍射极限储存环光源（DLSR）。如何有效地实现衍射极限束流发射度,是DLSR物理设计中的核心问题之一。基于束流发射度演化方程,针对HALF预研项目的储存环物理设计方案,计算了束内散射（IBS）效应带来的发射度增长,研究了DLSR中关键参数选择对IBS造成的发射度增长的影响。研究表明,在中低能DLSR物理设计中需要综合考虑储存环的周长、同步辐射阻尼时间等关键参数,以更好地抑制束流发射度的增长。在此研究基础上,通过综合考虑用户需求与储存环物理要求,提出了HALF当前工程项目的储存环物理设计方案。进一步综合应用束团拉伸、全耦合等措施后,更高效地抑制了HALF储存环内IBS造成的束流发射度增长。     

高能同步辐射光源直线加速器初期调束取得重要进展

高能同步辐射光源（HEPS）是中国第一台第四代高能同步辐射光源,其加速器由直线加速器、增强器、储存环及输运线组成。报道了HEPS直线加速器的初期束流调试重要进展。HEPS直线加速器是一台500 MeV S波段常温直线加速器,由热阴极电子枪、聚束系统、主直线加速器构成。在按时完成设备加工、安装和老练的基础上,于2023年3月9日启动束流调试,当天实现束流全线贯通。3月14日束流能量达到500 MeV,束团电荷量达到2.5 nC。经过测量,直线加速器出口束流能散0.4%,能量稳定度0.06%,水平和垂直几何发射度分别为233 nm和145 nm。目前直线加速器束团电荷量可达到7.0 nC,相关束流调试正在进行。     

北京同步辐射装置十年回顾与十年展望(下)

 1.目前国际上同步辐射装置发展的态势.1968年世界上第一台用作同步辐射光源的贮存环美国Wisconsin大学的Tantalus（E=200Mey）投入运行,1970年第一台专用的同步辐射光源,日本东京大学的SOR-Ring问世.事隔20年后的今天,已有14个国家,43座装置正在建造或者已经投入运行.从光源的特性来说已经从第一代发展到了第三代.表3列举几台目前世界上运行或即将建成出束的同步辐射装置的一些性能,亚洲地区的南朝鲜正在建造能量为2.0GeV的第三代同步辐射装置PLS,台湾地区也正在建造能量为1.3GeV的第三代同步辐射装置SRRC.由此看出:70年代建成的同步辐射装置多数为兼用机,发射度较大（10²～10³nm-rad）可放置插入件的直线节较少.到80年代中期,建成的同步辐射装置多数为专用机,发射度较小（10～10²nm-rad）,可放置插入件的直线节较多.     

基于能量回收技术的光源——ERL光源

能量回收技术将使用后的电子束进行能量回收,用于加速后续束团,可大大减少加速器消耗的射频功率和有害辐射。基于能量回收技术的光源除节能环保外,还具有束团短、发射度低的特点,可有效提高光源的峰值亮度和相干性,是一种很有潜力的未来先进光源。介绍能量回收直线加速器技术的基本原理、相关关键物理问题和技术以及能量回收直线加速器发展现状,最后简要介绍几个国际上提出的典型能量回收直线加速器光源方案。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

A stereo matching algorithm using multi-peak candidate matches and geometric constraints

Gray cross correlation matching technique is adopted to extract candidate matches with gray cross correla- tion coefficients less than some certain range of maximal correlation coefficient called multi-peak candidate matches. Multi-peak candidates are extracted corresponding to three closest feature points at first. The corresponding multi-peak candidate matches are used to construct the model polygon. Correspondence is determined based on the local geometric relations between the three feature points and the multi-peak candidates. The disparity test and the global consistency checkout are applied to eliminate the remaining ambiguous matches that are not removed by the local geometric relational test. Experimental results show that the proposed algorithm is feasible and accurate.