Optically fixed photorefractive correlator

An optically fixed photorefractive correlator is presented,where two-centre non-volatile holographic recording is employed to write and fix the matched filter in doubly doped LiNbO3 crystals.This correlator shows good correlation characteristics and insensitivity to the writing beam during readout.It can be used in cased requiring stability and not requiring modification for a long period,and it is refreshed optically when new information needs to be registered.     

Characterization of electrodeposited Bi2S3 thin films by holographic interferometry

Optical non destructive evaluation methods, using lasers as the object illumination source, include holographic interferometry. It is widely used to measure stress, strain, and vibration in engineering structures. Double exposure holographic interferometry (DEHI) technique is used to determine thickness and stress of electrodeposited bismuth trisulphide (Bi₂S₃) thin films for various deposition times. The same is tested for other concentration of the precursors. It is observed that, increase in deposition time, increases thickness of thin film but decreases stress to the substrate. The structural, optical and surface wettability properties of the as deposited films have been studied using X-ray diffraction (XRD), optical absorption and contact angle measurement, respectively. The X-ray diffraction study reveals that the films are polycrystalline with orthorhombic crystal structure. Optical absorption study shows the presence of direct transition with band bap 1.78 eV. The water contact angle measurement shows hydrophobic nature of Bi₂S₃ thin film surface.     

Crystallographic and microstructural aspects of the superconductor YBa2Cu3O7-y —an overview

Crystal structures and structural inhomogeneities observed in YBa₂Cu₃O_7-y are reviewed. It is brought out that a proper understanding of the nature of the structural inhomogeneities is essential for exploiting the technological potential of this material. The need for an adequate characterization of specimens used for experiments is emphasized. Practical implications of the ferroelastic nature of the material are discussed.     

Large Size of Real-Time Bi12Si020 Hologram Device Made with Inexpensive Wafer Cutting Method

The large real-time hologram device made by the previous Bi₁₂SiO₂₀ single crystal wafer cutting method poses several problems such as a large residue of material hinders the practical use. A study was carried out to fabricate a real-time hologram device using inexpensive laterally cut circular (1 0 0) Bi₁₂SiO₂₀ single crystal wafers which would be suitable for practical use for 3-dimensional display. An angle incident on a (1 0 0) wafer is applicable to the real-time hologram. An optimal electrode design for a device with uniform diffraction efficiency was considered, and the device properties were experimentally investigated.     

Spinel lithium titanate (Li4Ti5O12) as novel anode material for room-temperature sodium-ion battery

This is the first time that a novel anode material, spinel Li₄Ti₅O₁₂ which is well known as a “zero-strain” anode material for lithium storage, has been introduced for sodium-ion battery. The Li₄Ti₅O₁₂ shows an average Na storage voltage of about 1.0 V and a reversible capacity of about 145 mAh/g, thereby making it a promising anode for sodium-ion battery. E_x-situ X-ray diffraction (XRD) is used to investigate the structure change in the Na insertion/deinsertion process. Based on this, a possible Na storage mechanism is proposed.     

Ab initio prediction on ferrotoroidic and electronic properties of olivine Li4MnFeCoNiP4O16

First-principles calculations predict that olivine Li4MnFeCoNiP4O16 has a large toroidal moment and ferrimagnetic configuration with a magnetic moment of 1.99μB per formula unit. Density functional theory plus U (DFT+U) shows an indirect band gap of 0.65 eV in this hypothetical material. The band gap is not simply related to the electronic conductivity when it is used as cathode material in rechargeable Li-ion batteries. Based on the orbital-resolved density of states for the transition-metal ions in the hypothetical material, Co, Ni and Mn are in the high-spin configuration while Fe is in the low-spin configuration, which leads to a large resulting toroidal moment deriving from the Co and Ni ions. The spin configuration of the transition-metal ions in the system breaks the space-and time-inversion symmetry and leads to the magnetoelectric property simultaneously. The ferrotoroidic domain, the fourth form of ferroic, is observed in this new material, as in the case of LiCoPO4 reported recently.     

Nonvolatile holographic storage in triply doped LiNbO3: Hf, Fe, Mn crystals

It has been suggested to use LiNbO3:Fe,Mn crystal for solving the problem of information volatility during the read-out process with all-optical facilities,but the minute order response time is far from the requirements for the real-time information processing.We present the nonvolatile holographic storage properties of LiNbO3:Hf,Fe,Mn.The response time is shortened to 5.0 s,and the sensitivity S is enhanced to 0.22 cm/J in this triply doped crystal.The experimental results show that the HfO2 doping threshold is 5.0 mol.%.Thus it seems that we have found a useful tetravalent dopant for LiNbO3:Fe,Mn that can obviously improve the nonvolatile holographic recording sensitivity.     

Tb0.3Dy0.7Fe2合金的本构参数辨识方法研究

建立了一种简便的、适用于磁畴模型应用的Tb_0.3Dy_0.7Fe₂ 合金本构参数辨识方法. 针对Tb_0.3Dy_0.7Fe₂合金磁畴模型中本构参数不明确且直接实验测试困难的问题, 提出了一种数值计算与实验测试相结合的参数辨识方法. 采用坐标变换与绘制自由能等势曲线相结合的方法, 简化了载荷作用下Tb_0.3Dy_0.7Fe₂ 合金内磁畴角度偏转的数值计算, 研究了合金磁畴角度偏转模型的参数依赖性. 在此基础上, 结合简单的实验测试, 建立了Tb_0.3Dy_0.7Fe₂合金各向异性常数K₁ 和K₂、能量分布因子ω、晶轴取向分布的辨识及修正方法. 该方法能够简单、快速地完成Tb_0.3Dy_0.7Fe₂ 合金磁畴模型中本构参数的辨识, 对完善磁致伸缩材料磁畴偏转的数值计算模型非常有意义. 理论分析可为类磁致伸缩材料磁机耦合模型的建立、完善, 以及材料本构参数的辨识、获取提供参考.     

Studies on electrodeposited As2S3 thin films by double exposure holographic interferometry technique

Arsenic trisulphide (As₂S₃) thin films have been deposited onto stainless steel and fluorine doped tin oxide (FTO) coated glass substrates by electrodeposition technique using arsenic trioxide (As₂O₃) and sodium thiosulphate (Na₂S₂O₃) as precursors and ethylene diamine tetracetic acid (EDTA) as a complexing agent. Double exposure holographic interferometry (DEHI) technique was used to determine the thickness and stress of As₂S₃ thin films. It was observed that the thickness of the thin film increases whereas film stress to the substrate decreases with an increase in the deposition time. X-ray diffraction and water contact angle measurements showed polycrystalline and hydrophilic surface respectively. The bandgap energy increases from 1.82 to 2.45 eV with decrease in the film thickness from 2.2148 to 0.9492 μm.     

Study of near-infrared nonvolatile two-center holographic recording in LiNbO3:Fe:Rh crystal

The near-infrared nonvolatile holographic recording has been realized in a doubly doped LiNbO₃:Fe:Rh crystal by the traditional two-center holographic recording scheme, for the first time. The recording performance of this crystal has been investigated by recording with 633 nm red light, 752 nm red light and 799 nm near-infrared light and sensitizing with 405 nm purple light. The experimental results show that, co-doped with Fe and Rh, the near-infrared absorption and the photovoltaic coefficient of shallow trap Fe are enhanced in this LiNbO₃:Fe:Rh crystal, compared with other doubly doped LiNbO₃ crystals such as LiNbO₃:Fe:Mn. It is also found that the sensitizing light intensity affects the near-infrared recording sensitivity in a different way than two-center holographic recording with shorter wavelength, and the origin of experimental results is analyzed.     

Theoretical study on the interaction of heptafluoro-iso-butyronitrile decomposition products with Al (1 1 1)

Seeking environmentally friendly gas-insulated medium has become a research hotspot in recent years. At present, C₃F₇CN (Heptafluoro-iso-butyronitrile) is considered to be a potential SF₆ environment-friendly alternative gas and some achievements have been made in the study of its insulation and decomposition characteristics, but there are few reports on the compatibility between its characteristic decomposition products and materials. The investigation of compatibility between gas-insulated medium and material is an important part of evaluating its comprehensive performance. In this paper, we investigated the interaction between C₂F₅CN, CF₃CN, COF₂ and CF₄ with the aluminium widely used in electrical equipment. It was found that the interaction between C₂F₅CN, CF₃CN and Al (1 1 1) surface is strong. There are obvious charge transfer and electron orbital overlap between the C atom, N atom in CN group and Al (1 1 1). The interaction between COF₂, CF₄ and Al (1 1 1) surface is weak and van der Waal’s forces play the major role. Relevant results reveal the characteristics of C₃F₇CN decomposition products and provide theoretical guidance for evaluating the material compatibility between C₃F₇CN decomposition products and aluminium.     

Significant effect of electron transfer between current collector and active material on high rate performance of Li4Ti5O12

The rate and cycling performances of the electrode materials are affected by many factors in a practical complicated electrode process. Learning about the limiting step in a practical electrochemical reaction is very important to effectively improve the electrochemical performances of the electrode materials. Li₄Ti₅O₁₂, as a zero-strain material, has been considered as a promising anode material for long life Li-ion batteries. In this study, our results show that the Li₄Ti₅O₁₂ pasted on Cu or graphite felt current collector exhibits unexpectedly higher rate performance than on Al current collector. For Li₄Ti₅O₁₂, the electron transfer between current collector and active material is the critical factor that affects its rate and cycling performances.     

Forced oscillator model of dynamic spatial charge field in the reduced Zn:Fe:LiNbO3 crystal

Holographic data storage is promised to be the next-generation optical storage technology for many years. The Zn:Fe:LiNbO₃ crystal is studied widely because of its promising holographic storage properties. The forced oscillator model is used to explain the self-erasing phenomenon in the reduced Zn:Fe:LiNbO₃ crystals. It is showed that the total spatial charge field is dominated by two kinds of carrier with different respond time, which are electron and hole, respectively. The cooperative action of two kinds carrier induces that the total charge field non-monotonically varies with the recording time. The same diffraction efficiency of hologram with equal exposure energy is realized by the self-erasing property. The precision of the optical correlation recognition based on holographic storage will be improved.     

Synthesis and characterization of thermoluminescent Li2B4O7 nanophosphor

Lithium borate (Li₂B₄O₇) is a low Z_eff, tissue equivalent material that is commonly used for medical dosimetry using the thermoluminescence (TL) technique. Nanocrystals of lithium borate were synthesized by the combustion method for the first time in the laboratory. TL characteristics of the synthesized material were studied and compared with those of commercially available microcrystalline Li₂B₄O₇. The optimum pre-irradiation annealing condition was found to be 300 °C for 10 min and that of post-irradiation annealing was 300 °C for 30 min. The synthesized Li₂B₄O₇ nanophosphor has very poor sensitivity for low doses of gamma up to 10¹ Gy whereas from 10¹ to 4.5×10² Gy this phosphor exhibits a linear response and then from 4.5×10² to 10³ Gy it shows supralinearity. Thermoluminescence properties of Li₂B₄O₇ nanophosphor doped with Cu has also been investigated in this paper. It shows low fading and a linear response over a wide range of gamma radiation from 1×10² to 5×10³ Gy. Therefore the synthesized lithium borate nanophosphor doped with Cu may be used for high dose measurements of gamma radiations.     

Depth profiling of cells and tissues by using C60 and SF5 as sputter ions

In the present study, SF₅⁺ and C₆₀⁺ were used as primary ions for sputtering and Bi₃⁺ was used as primary ions for analysis. The depth profiling procedure was utilized to make 3D images of the chemistry of single cultured cells and tissue samples of intact intestinal epithelium.The results show sputtering of organic material from cells and tissue with both SF₅⁺ and C₆₀⁺ sources. Cholesterol fragments were found in the superficial layers when sputtering with C₆₀⁺. Spectra were collected revealing the change in yield along the z-axis of the sample. 3D images of the localization of Na, K, phosphocholine and cholesterol were constructed with both ion sources for single cell cultures and the mouse intestine.Cryostate sections of mouse intestine were analysed in 2D and the results were compared with the 3D image of the intestine. The localization of cholesterol and phosphocholine was found to be similar in cryostate sections analysed in two dimensions and the sputtered, freeze-dried intestine analysed in 3D. The comparison of 2D and 3D images suggest that the phosphocholine signal faded with C₆₀⁺ sputtering. In conclusion, both C₆₀⁺ and SF₅⁺ can be used as primary ion sources for sputtering of organic material from cells and tissues. Consecutive analysis with a Bi₃⁺ source can be used to obtain image stacks that could be used for reconstruction of 3D images.     

Electrochemical impedence spectroscopy versus optical interferometry techniques during anodization of aluminium

In the present investigation, holographic interferometry was utilized for the first time to measure in situ the thickness of the oxide film, alternating current (AC) impedance, and double layer capacitance of aluminium samples during anodization processes in aqueous solution without any physical contact. The anodization process (oxidation) of the aluminium samples was carried out by the electrochemical impedance spectroscopy (EIS), in different concentrations of sulphuric acid (1.0–2.5% H₂SO₄) at room temperature. In the mean time, the real-time holographic interferometric was used to measure the thickness of anodized (oxide) film of the aluminium samples in aqueous solutions. Also, mathematical models were applied to measure the AC impedance, and double layer capacitance of aluminium samples by holographic interferometry, during anodization processes in aqueous solution. Consequently, holographic interferometric is found very useful for surface finish industries especially for monitoring the early stage of anodization processes of metals, in which the thickness of the anodized film, the AC impedance, and the double layer capacitance of the aluminium samples can be determined in situ. In addition, a comparison was made between the electrochemical values obtained from the holographic interferometry measurements and from measurements of EIS. The comparison indicates that there is good agreement between the data from both techniques.     

Effect of fluorine in Li1.27Cr0.2Mn0.53O2 cathode for secondary lithium batteries

Fluorine substituted Li_1.27Cr_0.2Mn_0.53O₂ electrode, prepared by sol–gel method, was investigated in the present work. Thermal analysis was done on this cathode material and found to be thermally stable with a loss of weight near 300 °C. Influence of fluorine substitution on the structural and electrochemical properties of the Li_1.27Cr_0.2Mn_0.53O₂ electrode was studied by X-ray diffraction (XRD) and field emission scanning electron microscope. XRD pattern of the fluorine-doped Li_1.27Cr_0.2Mn_0.53O₂ cathode material quenched at 900 °C indicates a phase pure material. The charge–discharge profile of the prepared cathode material showed that the fluorine substitution for oxygen in the cathode material resulted in improved capacity retention. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, December 7–9, 2006.     

Nonvolatile photorefractive holographic recording in Sc:Ce:Cu:LiNbO3

In this paper experimental studies of nonvolatile photorefractive holographic recording in Ce:Cu:LiNbO₃ crystals doped with Sc(0,1,2,3 mol%) were carried out. The Sc:Ce:Cu:LiNbO₃ crystals were grown by the Czochralski method and oxidized in Nb₂O₅ powders. The nonvolatile holographic recording in Sc:Ce:Cu:LiNbO₃ crystals was realized by the two-photon fixed method. We found that the recording time of Sc:Ce:Cu:LiNbO₃ crystal became shorter with the increase of Sc doping concentration, especially doping with Sc(3 mol%), which exceeds the so-called threshold, and there was little loss of nonvolatile diffraction efficiencies between Sc(3 mol%):Ce:Cu:LiNbO₃ and Ce:Cu:LiNbO₃ crystals.     

新型光存储材料Sr2SnO4: Tb3+, Li+ 的合成及其红外上转换光激励发光性能的研究

采用高温固相法获得了一种只具有 微弱余辉的新型电子俘获型光存储材料Sr₂SnO₄:Tb^{3 +}, Li ⁺. 发光性能研究结果表明: 该材料对980 nm的红外激光具有很好的上转换光激励信息读出响应, 同时292 nm紫外光为其最佳信息写入光源. 光存储性能研究结果表明: 该材料的浅陷阱较少, 因此其余辉发光很弱, 不到500 s; 另一方面, 该材料中存在大量的深蓄能陷阱. 因此, Sr₂SnO₄: Tb^{3 +}, Li⁺是一种具有较好实际应用价值的新型电子俘获型光存储材料. 此外, 还讨论了Sr₂SnO₄: Tb^{3 +}, Li⁺的光存储发光机理.