活泼配盐[(μ-RE)(μ-E′)Fe_2(CO)_6][Et_3NH][E,E′=S,Se]的亲电反应研究——蝶状Fe_2SSe及Fe_2Se_2簇合物的合成及表征

本文由［（μｔＢｕＳ）（μＣＯ）Ｆｅ２（ＣＯ）６］［Ｅｔ３ＮＨ］和硒粉形成的［（μｔＢｕＳ）（μＳｅ）Ｆｅ２（ＣＯ）６］［Ｅｔ３ＮＨ］，分别与溴化苄，二碘甲烷及邻一、间一、对一双（溴甲基）苯反应，合成了蝶状Ｆｅ２ＳＳｅ单簇物（μｔＢｕＳ）（μＰｈＣＨ２Ｓｅ）Ｆｅ２（ＣＯ）６（３ａ）和双簇物［（μｔＢｕＳ）Ｆｅ２（ＣＯ）６］２（μＳｅＺＳｅμ）［Ｚ＝ＣＨ２，ｏ．ｍ．ｐ双（亚甲基）苯］（４ａｄ）。类似地，由［（μＰｈＳｅ）（μＣＯ）Ｆｅ２（ＣＯ）６］［Ｅｔ３ＮＨ］和硫粉或硒粉所形成的［（μＰｈＳｅ）（μＳ）Ｆｅ２（ＣＯ）６］［Ｅｔ３ＮＨ］或［（μＰｈＳｅ）（μＳｅ）Ｆｅ２（ＣＯ）６］［Ｅｔ３ＮＨ］分别与对一双（溴甲基）苯反应合成了蝶状Ｆｅ２ＳＳｅ和Ｆｅ２Ｓｅ２双簇物［（μＰｈＳｅ）Ｆｅ２（ＣＯ）６］２［μＳ（ｐＣＨ２Ｃ６Ｈ４ＣＨ２）Ｓμ］（５ａ）及［（μＰｈＳｅ）Ｆｅ２（ＣＯ）６］２［μＳｅ（ＰＣＨ２Ｃ６Ｈ４ＣＨ２）Ｓｅμ］（５ｂ）。所有产物均经元素分析、ＩＲ和１ＨＮＭＲ表征。     

（四甲基二硅撑）双（3—三甲硅基环戊二烯基）—四羰基二铁…

标题化合物（Ｍｅ２ＳｉＳｉＭｅ２）〔η＾５－（３－Ｍｅ３ＳｉＣ５Ｈ３）Ｆｅ（ＣＯ）２〕２／（μ－ＣＯ）２（Ａ）分子中的Ｆｅ－Ｆｅ键被钠汞齐还原断裂，生成相应的双铁负离子，分别与ＭｅＣＯＣｌ、ＰｈＣＯＣｌ、ＰｈＣＨ２Ｃｌ、ＣｌＣＨ２ＣＯＯＣ２Ｈ５和Ｐｈ３ＳｎＣｌ进行亲核取代反应，生成在铁原子上引入相应取代基的产物（Ｍｅ２ＳｉＳｉＭｅ２）〔η＾５－（３－Ｍｅ３ＳｉＣ５Ｈ３）Ｆｅ（ＣＯ）２Ｒ〕２（Ｒ：Ｍ     

（四甲基二硅撑）双（3－三甲硅基环戊二烯基）－四羰基二铁的反应性

标题化合物（Ｍｅ_２ＳｉＳｉＭｅ_２）［η￣５－（３－Ｍｅ_３ＳｉＣ_５Ｈ_３）Ｆｅ（ＣＯ）_２］_２／（μ－ＣＯ）_２（Ａ）分子中的Ｆｅ－Ｆｅ键被钠汞齐还原断裂，生成相应的双铁负离子，分别与ＭｅＣＯＣｌ、ＰｈＣＯＣｌ、ＰｈＣＨ_２Ｃｌ、ＣｌＣＨ_２ＣＯＯＣ_２Ｈ_５和Ｐｈ_３ＳｎＣｌ进行亲核取代反应，生成在铁原子上引入相应取代基的产物（Ｍｅ_２ＳｉＳｉＭｅ_２）［η￣５－（３－Ｍｅ_３ＳｉＣ_５Ｈ_３）Ｆｅ（ＣＯ）_２Ｒ］_２（Ｒ：ＭｅＣＯ（１），ＰｈＣＯ（２），ＰｈＣＨ_２（３），ＣＨ_２ＣＯＯＣ_２Ｈ_５（４），Ｐｈ_３Ｓｎ（５），Ｉ（６））。Ａ在氯仿中与碘反应，得到Ｆｅ－Ｆｅ断裂的双铁碘化物，但在苯中与过量碘反应，则得到Ｆｅ－Ｉ－Ｆｅ桥联的离子型化合物（Ｍｅ_２ＳｉＳｉＭｅ_２）［η￣５－（３－Ｍｅ_３ＳｉＣ_５Ｈ_３）Ｆｅ（ＣＯ）_２］_２Ｉ·Ｉ（７）。化合物６的晶体和分子结构经Ｘ射线衍射测定，６属单斜晶系，Ｐ２１／ｃ空间群，ａ＝１．７２１７（４）ｎｍ，ｂ＝０．７７５３（２）ｎｍ，Ｃ＝１．３６２９（７）ｎｍ，β＝１０３．８０（３）°，Ｖ＝１．７６７（２）ｎｍ３，Ｚ＝４，Ｄｃ＝１．６２９９·ｃｍ－１，最终偏差因子Ｒ＝０．０５４。     

含MoFe3Se4类立方烷核芯簇合物的合成与结构表征

室温下［Ｅｔ_４Ｎ］_２ＭｏＳｅ_４, ＦｅＣｌ_２和 Ｒ_２ＮＣＳ_２Ｎａ在 ＤＭＦ和 ＣＨ_３ＣＮ混合溶剂中反应,得到含ＭｏＦｅ_３Ｓｅ_４核芯的Ｍｏ－Ｆｅ－Ｓｅ簇合物ＭｏＦｅ_３Ｓｅ_４（μ－Ｒ_２ＮＣＳ_２）_２（Ｒ_２ＮＣＳ_２）_４（Ｒ２＝Ｍｅ_２（１）,Ｅｔ_２（２）,Ｃ_４Ｈ_８（３））．化合物２的单晶Ｘ射线衍射分析表明,其分子结构为２个桥式和４个螫合Ｅｔ_２ＮＣＳ_２~－配体包围的一个扭曲类立方烷Ｍ_４Ｓｅ_４簇核对３个化合物的ＣＶ进行了表征,它们在ＤＭＳＯ溶液中的电化学行为表现出了多电子可逆的传递过程．     

若干三核羧酸配合物的振动光谱及其与结构的某些相关规律

报导了通式为（Ｆｅ２Ｍ（μ３－Ｏ）（μ－Ｏ２ＣＲ）６．Ｌ３）．ＸＨ２Ｏ（其中Ｍ＝Ｍｎ（Ⅱ），Ｃｏ（Ⅱ），Ｎｉ（Ⅱ），Ｆｅ（Ⅲ）（这时骨架为阳离子），Ｒ＝ＣＨ３．Ｃ２Ｈ５；Ｌ＝Ｈ２Ｏ，ｐｙ）的３类１１个配合物的振动光谱，在谱带经验归属及简正坐标分析计算的基础上，分别详细讨论了配体及骨架的振动光谱与结构某些相关规律，这些规律具有一定的普遍性，因而有其理论和实际应用价值。     

Ce2O—TiO2／SiO2的制备及除氟性能研究

以ＳｉＯ２为基质，ＣｅＯ２ＴｉＯ２为包覆物质，采用溶胶凝胶法制备ＣｅＯ２ＴｉＯ２／ＳｉＯ２表面复合物，并对所制复合物进行除氟测试。用扫描电镜（ＳＥＭ）观察表面形貌，讨论实验环境、试剂用量等因素对ＣｅＯ２ＴｉＯ２／ＳｉＯ２制备及除氟性能的影响，结果表明：ｎＴｉ（ＯＣ４Ｈ９）４／ｎＣｅＣｌ３·７Ｈ２Ｏ＝１、ｎＣＨ３ＣＯＯＨ／ｎＴｉ（ＯＣ４Ｈ９）４＝４５、ｎＣ３Ｈ８Ｏ３／ｎＴｉ（Ｏ４Ｈ９）４＝０３、ＲＨ＝９５％，热处理温度１１０℃时，所制ＣｅＯ２ＴｉＯ２／ＳｉＯ２对Ｆ－的吸附容量（ｑ）为２１４ｍｇ／ｇ，去除率（Ｅ）为８５６％。     

CRYSTAL STRUCTURE OF A 2D SHEET－LIKE μ－CYANIDO－OXAMIDATO BRIDGED Fe（III）－Cu（II） HETERNUCLEAR COMPLEX

ＣＲＹＳＴＡＬＳＴＲＵＣＴＵＲＥＯＦＡ２ＤＳＨＥＥＴ－ＬＩＫＥμ－ＣＹＡＮＩＤＯ－ＯＸＡＭＩＤＡＴＯＢＲＩＤＧＥＤＦｅ（ＩＩＩ）－Ｃｕ（ＩＩ）ＨＥＴＥＲＮＵＣＬＥＡＲＣＯＭＰＬＥＸ￥ＮｅｉＦａｎｇＷｕ；ＺｈｏｎｇＮｉｎｇＣＨＥＮ；ＪｕｎＱＩＵａｎｄＷ...     

硅源及晶化时间对SAPO-5分子筛结构及性质的影响

分别以硅凝胶和正硅酸乙酯为硅源，通过改变晶化时间合成了系列ＳＡＰＯ５分子筛．用ＸＲＤ，ＭＡＳＮＭＲ和ＳＥＭ对分子筛的结构和形貌进行了表征．结果表明，以硅凝胶为硅源时，凝胶中的铝有３种面体配位状态．加热晶化很容易使凝胶转化为ＳＡＰＯ５分子筛，合成物的晶形更加规则．在４８ｈ内，延长晶化时间有助于硅进入分子筛骨架，使残余的Ａｌ２Ｏ３·Ｈ２Ｏ进一步反应，使骨架硅和铝的面体配位环境更加对称；超过４８ｈ后，硅开始游离出分子筛骨架，并使部分ＳＡＰＯ５转化为ＳＡＰＯ３４．以正硅酸乙酯为硅源时，硅和铝的反应活性均较低，凝胶中ＡｌＰＯ４及Ａｌ２Ｏ３·Ｈ２Ｏ的量均比四面体配位铝的量大．只有当晶化时间超过４８ｈ时，反应物中Ａｌ２Ｏ３·Ｈ２Ｏ才能完全转化．在此反应体系中，延长晶化时间有助于ＳＡＰＯ５的生成，使分子筛骨架硅的取代量更大，晶形更加规则，骨架铝的对称性更好．     

（四甲基二硅撑）二（3－三甲硅基环戊二烯基）四羰基二铁及其相关化合物的合成及结构

１，２－二（三甲硅基环戊二烯基）四甲基二硅烷与Ｆｅ（ＣＯ）_５在二甲苯中于１０５～１１０℃反应除分离到少量标题化合物（Ｍｅ_２ＳｉＳｉＭｅ_２）［η－（３－Ｍｅ_３ＳｉＣ_５Ｈ_３Ｆｅ（ＣＯ）］_２（μ－ＣＯ）_２（５）外，主要是生成了脱Ｍｅ_３Ｓｉ基的产物（Ｍｅ_２ＳｉＳｉＭｅ_２）［η－Ｃ_５Ｈ_４Ｆｅ（ＣＯ）］_２（μ－ＣＯ）_２（１）及１的热重排异构体［Ｍｅ_２ＳｉＣ５Ｈ４－Ｆｅ（ＣＯ）_２］_２（２）．将５的二甲苯溶液加热回流１８ｈ，则转化为其异构体［Ｍｅ_２Ｓｉ（Ｍｅ_３ＳｉＣ_５Ｈ_３）Ｆｅ（ＣＯ）_２］_２（６）．脱硅基发生在由相应反应物制备５的过程中。且脱硅基是与反应物中（Ｍｅ_２ＳｉＳｉＭｅ_２）桥的存在有关．５的晶体结构经Ｘ射线衍射测定属单斜晶系，Ｐ２_１／ｍ空间群，晶体学数据：ａ＝０．６７８０（１）ｎｍ，ｂ＝２．２３０３（９）ｎｍ，ｃ＝０．９９８８（１）ｎｎ，；β＝９８．９６（１）°，Ｖ＝１．４９６０ｎｍ~３．Ｚ＝２，Ｄ_ｃ＝１．３６ｇ／ｃｍ~３．     

苯二甲酰基桥联铁硫配合物［（μ－RS）Fe_2（CO）_6］_2（μ－OCC_6

通过由Ｆｅ３（ＣＯ）１２、ＲＳＨ和Ｅｔ３Ｎ所形成的［（μ－ＣＯ）（μ－ＲＳ）Ｆｅ２（ＣＯ）６］Ｅｔ３ＮＨ于室温下分别与对或间苯二甲酰氯的原位反应，首次合成６个结构新颖的苯二甲酰基桥联铁硫配合物［（μ－ＲＳ）·Ｆｅ２（ＣＯ）６］２（μ－ｐ－ＯＣＣ６Ｈ４ＣＯ－ｐ－μ）（Ｒ＝Ｅｔ，ｎ－Ｂｕ，ｔ－Ｂｕ）以及［（μ－ＲＳ）Ｆｅ２（ＣＯ）６］２（μ－ｍ－ＯＣＣ６Ｈ４ＣＯ－ｍ－μ）（Ｒ＝ｎ－Ｐｒ，ｎ－Ｂｕ，ｔ－Ｂｕ）。经元素分析、ＩＲ光谱及１ＨＮＭＲ表征了它们的结构，并讨论了产物的生成过程。此外，还提出了合成对苯二甲酰氯的一种新方法。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.