疏水基含量和微嵌段长度对缔合聚合物溶液弹性的影响

研究了疏水基含量和微嵌段长度对缔合聚合物,聚(丙烯酰胺-丙烯酸钠-十六烷基二甲基烯丙基氯化铵)[P(AM-NaAA-C16DMAAC)],弹性行为的影响规律。研究结果表明,对于结构类似且具有相近零剪切粘度的缔合聚合物,疏水基含量越高,聚合物分子链间形成稠密网络结构的疏水缔合能力越强,其第一法向应力差N1越大,N1出现拐点处对应剪切速率越小,缔合聚合物溶液弹性越好;并且缔合聚合物溶液的弹性随着疏水微嵌段长度的增加先增加后降低,存在最佳微嵌段长度。因此,可以通过调整分子结构有效改变缔合聚合物溶液的弹性行为。     

表面活性单体NaAMC_(14)S/丙烯酰胺共聚物的分子链微结构与疏水缔合性

在实施丙烯酰胺型阴离子表面活性单体2-丙烯酰胺基十四烷磺酸钠(NaAMC14S)与丙烯酰胺(AM)水溶液均相共聚合过程中,分别通过改变AM与NaAMC14S的投料比、改变外加电解质NaCl的加入量以及引发剂的用量,制备了分子链微结构系列变化的具有微嵌段结构的共聚物NaAMC14S/AM;采用荧光探针法与表观粘度法研究了共聚物分子链微结构与其疏水缔合性能之间关系,探索了共聚物分子链中疏水微嵌段含量、疏水微嵌段长度及共聚物分子量诸微结构因数对共聚物疏水缔合性的影响.结果表明,共聚物NaAMC14S/AM的疏水缔合性随着疏水微嵌段含量的增加而增强,随着疏水微嵌段长度的增长而增强,当疏水微嵌段含量和嵌段长度一定时,共聚物的疏水缔合性随分子量的增大而增强.     

微嵌段疏水缔合聚合物/十二烷基硫酸钠溶液体系的流变特性

研究了疏水微嵌段长度和阴离子表面活性剂十二烷基硫酸钠(SDS)对聚/表体系的流变性的影响。研究表明,微嵌段长度对疏水缔合聚合物溶液的粘性有较大影响,嵌段越长聚合物越容易发生分子间缔合其溶液粘度越大。随着SDS的加入,各聚/表体系粘度短期内出现一个极值,然后降至一个稳定值,嵌段长度越长,其极值点越大。聚合物与SDS体系表现出的剪切增稠和粘弹性特征也随嵌段长度增加而增大。通过研究不同体系平台区模量(G0)和特征松弛时间(TR)的变化规律,发现嵌段长度和SDS含量对聚/表体系物理交联缔合点的密度有较大影响,对缔合点强度影响较小。本文有助于更好地解释微嵌段疏水缔合聚合物与表面活性剂相互作用的内在因素。     

丙烯酰胺-苯乙烯双亲嵌段共聚物的微结构及水溶液行为

通过改变丙烯酰胺(AM)与苯乙烯(St)的投料比、苯乙烯与表面活性剂的加入量之比及引发剂加入量,在微乳液中制备了分子链微结构系列变化的丙烯酰胺-苯乙烯双亲嵌段共聚物(PAM-b-PSt),用荧光探针法与表面活性测定法详细地研究了共聚物中PSt嵌段长度、含量及分子量等微结构因素对共聚物在水溶液中的疏水缔合性与表面活性的影响.结果表明,当共聚物水溶液的浓度高于临界缔合浓度时,PAM-b-PSt的疏水缔合作用以分子间的缔合为主.若共聚物中PSt嵌段含量及分子链长一定时,随着PSt疏水嵌段长度增长,PAM-b-PSt的疏水缔合性增强,而对共聚物的表面活性影响很小.若共聚物中PSt疏水嵌段长度及分子链长一定时,PAM-b-PSt的疏水缔合性随着PSt嵌段含量的变化而变化,当PSt嵌段含量一定时,使大分子链之间产生最强的疏水缔合作用;而其表面活性则随着PSt嵌段含量的增大而增强.若共聚物中PSt疏水嵌段长度及含量一定时,分子量对其表面活性有较大的影响,分子量越高,表面活性越差;同时,在较稀的溶液浓度范围内,分子量对PAM-b-PSt的疏水缔合性的影响则很小.     

荧光淬灭法研究疏水缔合共聚物(PAM-b-PPOEA)_n自组装聚集数

运用荧光淬灭技术,包括稳态荧光淬灭法(SSFQ)和时间分辨荧光淬灭法(TRFQ),研究了疏水缔合水溶性丙烯酰胺2苯氧基丙烯酸酯多嵌段共聚物[P(AM POEA)]在水溶液中自组装的聚集数.这类聚合物在水溶液中易形成胶束状聚集体,探针芘分子和淬灭剂二苯酮增溶于疏水微区,荧光测定结果很好地符合Poisson淬灭模型.实验结果表明聚合物链结构、聚合物浓度和无机盐对聚集体的尺寸具有重要影响.聚合物自组装聚集数NA随疏水单体含量的增加和疏水嵌段长度的减小而增大,同时也随聚合物浓度和NaCl浓度增加而增大.另外对聚合物链结构、聚集数和溶液粘度的相互关系进行了讨论.     

疏水缔合聚丙烯酰胺与双子表面活性剂的相互作用

制备了一种脂肪酸酯双磺酸盐型双子表面活性剂, 利用粘度法、界面张力法和原子力显微镜研究了疏水缔合聚丙烯酰胺与双子表面活性剂在溶液中的相互作用. 实验结果表明: 疏水缔合聚丙烯酰胺在溶液中能够通过自组装形成疏水微区并发展成网络结构, 疏水微区与表面活性剂在溶液中能形成混合胶束; 当一定量的表面活性剂加入时, 对疏水缔合聚丙烯酰胺的自组装起促进作用, 而过多双子表面活性剂的加入又会对聚合物分子的自组装起抑制作用, 从而显著影响疏水缔合聚丙烯酰胺的溶液性质, 随着表面活性剂浓度的增加, 聚合物溶液粘度先增加、再降低; 同时, 疏水缔合聚丙烯酰胺对双子表面活性剂的界面性能也有较大影响, 聚合物的加入使双子表面活性剂降低油/水界面张力的能力下降, 油/水界面张力达到平衡所需时间延长.     

醇-可聚合表面活性剂混合胶束法合成微嵌段缔合聚合物及其流变性

低碳醇与可聚合表面活性剂(surfmer)可以形成混合胶束, 本文通过稳态荧光猝灭法(SSFQ)测定了该混合胶束中可聚合表面活性剂的聚集数, 并通过绝热聚合和后水解工艺合成出不同微嵌段长度的较高分子量(M_w)缔合聚合物聚(丙烯酰胺-丙烯酸钠-十六烷基二甲基烯丙基氯化铵)[P(AM-NaAA-C₁₆DMAAC)]. 聚合物结构经傅里叶变换-红外(FT-IR)光谱和核磁共振碳谱(¹³C NMR)表征证实, 并通过流变性实验研究了微嵌段长度对增粘性能、抗盐性能、粘弹性能的影响规律. 实验结果表明: 该方法可以有效调节缔合聚合物中微嵌段的长度, 随着微嵌段长度增加, 临界缔合浓度(CAC)逐渐降低, 增粘性能、粘弹性能先逐步增加后逐步降低, 并且发现其对聚合物的性能的影响规律中存在最佳嵌段长度.     

Gemini表面活性剂对疏水缔合聚丙烯酰胺界面吸附膜扩张流变性质的影响

采用小幅低频振荡和界面张力弛豫技术, 考察了疏水缔合水溶性聚丙烯酰胺(HMPAM)在正癸烷-水界面上的扩张黏弹性质, 研究了不对称Gemini表面活性剂C₁₂COONa-p-C₉SO₃Na对其界面扩张性质的影响. 研究发现, 疏水链段的存在, 使HMPAM在界面层中具有较快的弛豫过程, 扩张弹性显示出明显的频率依赖性. 表面活性剂分子可以通过疏水相互作用与聚合物的疏水嵌段在界面上形成类似于混合胶束的特殊聚集体. 表面活性剂分子与界面聚集体之间存在快速交换过程, 可以大大降低聚合物的扩张弹性. 同时, 聚合物分子链能够削弱表面活性剂分子长烷基链之间的强相互作用, 导致混合吸附膜的扩张弹性远低于单独表面活性剂吸附膜.     

疏水缔合聚丙烯酰胺的合成及溶液性能研究

水溶性疏水缔合聚合物是在聚合物亲水主链上引入极少量疏水基团(一般小于2ｍｏｌ%)而形成的一种新型水溶性聚合物[1]。由于这类聚合物具有独特的流变性能,因而备受学术界和工业界关注。目前已作为涂料增稠剂[2]和流变改性剂[3]得到了应用,而通过在部分水解聚丙烯酰胺(ＨＰＡＭ)的亲水主链上引入少量疏水单体而形成的疏水缔合聚丙烯酰胺(ＨＡＰＡＭ)则可望克服ＨＰＡＭ耐温、耐盐性差的缺陷[4]而作为新一代水溶性聚合物材料用于油气开采作业[5,6]。由于亲水单体和疏水单体的不相容性,通常通过在反应溶液中加入表面活性剂使亲水单体和疏水单体…     

部分水解聚丙烯酰胺在多孔介质中的静态吸附研究——水解度对吸附量的影响

部分水解聚丙烯酰胺在多孔介质中的静态吸附研究———水解度对吸附量的影响杨继萍李惠生黄鹏程（北京理工大学化工与材料学院北京１０００８１）（北京航空航天大学材料科学与工程系北京１０００８３）关键词部分水解聚丙烯酰胺，水解度，多孔介质，静态吸附聚合物作为...     

Aggregation behaviour of hydrophobically modified poly(allylammonium) chloride

 The behaviour of hydrophobically modified poly(allylammonium) chloride having octyl, decyl, dodecyl and hexadecyl side chains has been studied in aqueous solution using fluorescence emission techniques. Micropolarity studies using the I ₁/I ₃ ratio of the vibronic bands of pyrene show that the formation of hydrophobic microdomains depends on both the length of the side chain and the polymer concentration. The I ₁/I ₃ ratio of the polymers with low hydrophobe content (less than 5% mol) changes substantially when reaching a certain concentration. These changes are assigned to aggregation originating from interchain interactions. This behaviour is also confirmed by the behaviour of the monomer/excimer emission intensities of pyrenedodecanoic acid used as a probe. For polymers having dodecyl side chains and hydrophobe contents higher than 10%, aggregates are formed independently of the polymer concentration. Anisotropy measurements show that microdomains resulting from the inter- and/or intramolecular interactions are similar to those observed for cationic surfactants. Viscosity measurements show that the coil dimensions are substantially decreased for the polymers having high hydrophobe contents, indicating intramolecular associations. Received: 10 November 1999/Accepted: 7 April 2000     

含树枝体疏水缔合聚合物——聚醚树枝体改性聚丙烯酰胺的合成和性质

疏水缔合聚合物是一类含有少量疏水基团的水溶性功能高分子.在水溶液中,这类聚合物在疏水作用驱动下容易发生缔合,并伴随产生独特的缔合行为和溶液性质,因此研究这类聚合物具有重要的理论和应用意义.     

Dynamic measurements of adsorption of hydrolyzed polyacrylamide (HPAM) onto hematite

The adsorption measurements of hydrolyzed polyacrylamide (HPAM) onto hematite suspension are carried out to study the dynamics of the polymer adsorption onto the suspension particles and to investigate the mode of the polymer adsorption. The polymer is found to show much affinity for the adsorption because of the opposite charges possessed by the polymeric flocculant and the suspension particles. Various adsorption parameters such as adsorption coefficient, the rate constants for the adsorption and desorption, are evaluated with the help of a recently proposed kinetic scheme. It is found that the extent of adsorption and the adsorption rate are adequately affected by increasing the pH of the suspension while, unexpectedly, the adsorption is found to show only a marginal increase on addition of Na₂SO₄. Both the amount of the adsorbed polymer and the adsorption rate are also found to increase with the degree of hydrolysis of the polyelectrolyte.     

可再生纤维素/环糊精聚合物对水中亚甲基蓝吸附行为

利用甘蔗渣提取纤维素修饰环糊精聚合物,成功制备可再生纤维素/环糊精聚合物（SUG-EPI-CDP）吸附剂。采用傅利叶红外光谱仪（FT-IR）与热重分析仪（TGA）对材料进行表征,同时考察了该材料对水中亚甲基蓝（MB）吸附特性和机理的影响。结果表明：在溶液pH值为7、温度为30 ℃的条件下,SUG-EPI-CDP可在120 min内有效去除MB,去除率达80.9%。通过模型拟合发现,SUG-EPI-CDP对MB的吸附是自发且吸热的过程,符合准二阶动力学方程和Langmuir等温线模型。该吸附剂实验最大吸附量达8.1 mg/g,远高于其他废料所制备的吸附剂。结果表明,利用可再生纤维素修饰可有效提高环糊精聚合物的吸附性能,同时为甘蔗渣资源化利用提供了新途径。     

UNDERSTANDING THE HYDROPHOBIC EFFECT

The hydrophobic effect is the common expression for processes where nonpolar groups in molecules are spontaneously removed from water. Thermodynamic analysis of hydrocarbon solubility in water, micellization and adsorption of surfactants show that the hydrophobic effect can be understood in terms of two contributions. The first contribution is attributed to the structuring, or rearrangement, of water molecules in the vicinity of a hydrophobe. This contribution is favorable, and hence increases the solubility of hydrocarbons in water, increases the cmc, and decreases the adsorption of surfactants. The second contribution is attributed to the formation of a cavity in the water in order to accomodate the hydrophobe. This contribution dominates over the first one and is unfavorable, i.e. it decreases the solubility of hydrocarbons in water, decreases the cmc, and increases the adsorption of surfactants. Thus, the cause of the hydrophobic effect is to be found in the large energy required to form a cavity in the water. On the other hand the temperature dependence of the hydrophobic effect is entirely determined by the water structuring, or rearrangement, in the vicinity of a hydrophobe.     

Modification of the stability of oil-in-water nano-emulsions by polymers with different structures

The effect of polymers (hydrolyzed polyacrylamide (HPAM) and hydrophobically modified polyacrylamide (HMPAM)) on the stability of oil-in-water nano-emulsions has been studied in paraffin oil/Span 20-Tween 20/water systems by method of phase inversion composition (PIC). The stabilization of nano-emulsions was investigated by visual observation and the change of water content induced by centrifugation. Droplet size distributions of nano-emulsions were obtained by a laser-scanner particle size distribution analyzer. The interfacial tension and charge of nano-emulsions were obtained by interfacial tension and zeta potential measurements. All the results indicate that the droplet size can be decreased by the addition of HMPAM, while almost no change could be observed when the HPAM was added. Meanwhile, HMPAM has a better effect on the stabilization of nano-emulsions than HPAM. It may conclude that the HMPAM molecules adsorbed at the oil/water interface of the nano-emulsion droplets. Therefore, the stability of nano-emulsion with the addition of HMPAM is based on both an associative thickening mechanism caused by the alkyl chains of HMPAM molecules and the adsorption of HMPAM at the oil/water interface, which can form a solid film to prevent the Ostwald ripening of nano-emulsion droplets.     

聚离子液体水凝胶用于中性水中Cr(VI)的去除

随着经济的快速发展,水污染已成为全球关注的紧迫问题。其中,Cr（VI）在废水中含量较高且毒性较强,可引起多种严重疾病。而大多数污染地表水和地下水的pH往往是接近中性的。因此,开发具有近中性pH值下有效去除Cr（VI）的吸附剂对生态系统和公众健康至关重要。本文设计并制备了具有不同结构的三氮唑鎓聚离子液体水凝胶,并将其应用于CrO42-的吸附和释放。该水凝胶可在中性条件下实现水中CrO42-的100%去除,最大吸附量高达356 mg/g。等温吸附结果表明,在较低浓度下CrO42-在聚离子液体水凝胶中为单层吸附。此外,可进一步通过离子交换将吸附于水凝胶中的CrO42-释放出来,实现吸附剂的再生。     

Molecular simulation studies on the interaction between different polymers in aqueous solution

A molecular dynamics simulation was performed to investigate the aggregates of mixing and the interaction between different polymers in aqueous solution. These polymers include partially hydrolyzed polyacryamide (HPAM), hydroxyethylcellulose (HEC) and polyvinylpyrrolidone (PVP). The structures of mixed aggregates were analyzed from the dihedral angle distribution of: (1) pure HPAM; (2) HPAM in aqueous solution; (3) HPAM with small segments of PVP or HEC in aqueous solution. At the same time, the simulated IR spectra and the calculated interaction parameters were used to distinguish the different interactions between HPAM and PVP or HEC. In order to confirm the validity of the simulated predictions, experimental IR spectra of polymer systems were made, and the specific viscosity of the HPAM and PVP or HEC system was measured using capillary viscometry. It can be seen from the viscosity measurements that the viscosity of the HPAM/PVP system in aqueous solution decreases linearly with an increase in concentration of PVP, whereas a maximum viscosity value appears with the increase in concentration of HEC in the HPAM/HEC system. The conclusion was drawn that the interaction between HPAM and HEC is stronger than the one between HPAM and PVP, and that molecular simulation can be considered as an adjunct to experiments and can provide otherwise inaccessible (or, not easily accessible) microscopic information that experimentalists can use.     

热处理对憎水硅胶吸附水蒸气的影响

用甲基氯硅烷蒸气或溶液处理硅胶,均可制成憎水硅胶。关于憎水硅胶的吸附性能和热稳定性的研究,文献中时有报道。本文主要探讨以下3个问题:(1)在水蒸气吸附中,硅胶表面自由羟基和缔合羟基究竟哪种起主要作用;(2)从吸附水蒸气等数据讨论硅胶表面有机基团—OSi(CH_3)_3的热稳定性;(3)用二甲基二氯硅烷(DMCS)和三甲基氯硅烷(TMCS)处理的憎水硅胶,哪种硅胶的热稳定性较高。这些基本问题,不仅具有学术意义,对研究氧化物表面改性也有参考价值。