可磁性回收纳米级负载型杂多酸催化剂用于水中生物活性化合物的绿色合成(英文)

12‐Tungstophosphoric acid supported on aerosil silica and silica‐coated γ‐Fe2O3 nanoparticles was prepared and characterized using transmission electron microscopy,scanning electron microscopy,and inductively coupled plasma atomic emission spectroscopy.The catalytic activity of the two prepared catalysts was compared in the synthesis of 1,8‐dioxo‐9,10‐diaryldecahydroacridines in water.12‐Tungstophosphoric acid was highly dispersed on the silica‐coated γ‐Fe2O3 nanoparticles and showed higher activity and a higher reuse number compared with the acid supported on aerosil silica.The catalyst could be recovered simply by using an external magnetic field and could be reused several times without appreciable loss of its catalytic activity.     

Suzuki Reaction of Aryl Bromides Using a Phosphine-Free Magnetic Nanoparticle-Supported Palladium Catalyst

A palladium catalyst immobilized on superparaganetic nanoparticles was prepared with a palladium loading of 0.30 mmol/g. The catalyst was characterized using X-ray diffraction, scanning electron microscopy, transmission electron microscopy, vibrating sample magnetometry, thermogravimetric analysis, Fourier transform infrared, atomic absorption spectrophotometry, and nitrogen adsorption. The immobilized palladium catalyst was an efficient catalyst without added phosphine ligands for the Suzuki cross-coupling reaction of several aryl bromides with phenylboronic acid. The recovery of catalyst was simply by magnetic decantation in the presence of a magnet. The immobilized palladium catalyst can be reused many times without significant degradation in catalytic activity. No leaching of active palladium species into the reaction solution was detected.     

Acetylation of alcohols and phenols under solvent-free conditions using iron zirconium phosphate

Iron zirconium phosphate (ZPFe) nanoparticles were found to function as an efficient catalyst for the acetylation of a wide range of alcohols and phenols using acetic anhydride, generating good to excellent yields under solvent‐free conditions. The steric and electronic properties of various sub‐strates had a significant influence on the reaction conditions required to achieve the acetylation. The catalyst used in the current study was characterized by inductively coupled plasma‐optical emission spectrometry, X‐ray diffraction, N2 adsorption‐desorption, scanning electron microscopy, and transmission electron microscopy. These analyses revealed that the interlayer distance in the catalyst increased from 7.5 to 9.3 ? when Fe3+was intercalated between the layers, whereas the crystallinity of the material was reduced. This nanocatalyst could also be recovered and reused at least six times without any discernible decrease in its catalytic activity. This new method for the acetylation of alcohols and phenols has several important advantages, including mild and environ‐mentally friendly reaction conditions, as well as good to excellent yields and a facile work‐up.     

磷酸铜锆催化剂上醇选择性氧化（英文）

The catalytic activity of copper zirconium phosphate(ZPCu) in the selective oxidation of alcohols to their corresponding ketones or aldehydes, using H2O2 as an oxidizing agent, was studied. The oxida‐tion reaction was performed without any organic solvent, phase‐transfer catalyst, or additive. Steric factors associated with the substrates influenced the reaction. The catalyst was characterized using X‐ray diffraction, inductively coupled plasma atomic emission spectroscopy, energy‐dispersive X‐ray spectroscopy, and scanning electron microscopy. It was shown that the interlayer distance increased from 0.74 to 0.80 nm and the crystallinity was reduced after Cu2+ intercalation into the layers. This catalyst can be recovered and reused three times without significant loss of activity and selectivity.     

采用燃烧技术制备CuO纳米粒子:一种高效且环境友好的用于芳族醛合成芳族腈催化剂(英文)

CuO nanoparticles were synthesized using an energy-efficient and rapid solution combustion technique with malic acid employed as a fuel. The combustion-derived CuO nanoparticles were used as catalysts in a one-pot synthesis of aromatic nitriles from aromatic aldehydes and hydroxylamine hydrochloride. The catalyst was characterized by X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray analysis, transmission electron microscopy, and Brunauer-Emmett-Teller surface area analysis. The catalytic activity of the CuO nanoparticles in the synthesis of aromatic nitriles from aromatic aldehydes was evaluated. The present protocol offers the advantages of a clean reaction, simple methodology, short reaction duration (1-2 min), and high yield (85%-98%). The catalytic activity of the CuO nanoparticles was found to be higher than that of bulk CuO powder under the same conditions. The catalyst can also be recovered and reused up to four times with no significant loss of catalytic activity. The present approach is inexpensive and is a convenient technique suitable for industrial production of CuO nanoparticles and nitriles.     

HypoGel负载Pd纳米催化剂制备与表征及温和条件下催化Suzuki反应(英文)

A new heterogeneous catalyst composed of Pd nanoparticles immobilized within a HypoG el resin has been prepared in the absence of any ligands using an extensive cross-linking method.This newly developed nanocatalyst was characterized by N_2 adsorption-desorption,X-ray diffraction(XRD),transmission electron microscopy(TEM),scanning electron microscopy(SEM),energy dispersive X-ray(EDX),Fourier transform infrared spectroscopy and inductively coupled plasma-mass spectrometer(ICP-MS)techniques.TEM and XRD results revealed that the Pd nanoparticles were well dispersed with diameters in the range of 4–12 nm,and an average size of about 8 nm.The cross-linked Pd catalyst demonstrated excellent catalytic activity towards the synthesis of a series of biaryl compounds by the reaction of various aryl halides(e.g.,bromides andiodides)with phenylboronic acid in the presence of tetrabutylammonium bromide.ICP-MS analysis indicated that there was only 0.25%weight loss of Pd(0.55±0.02 ppm)from the supported catalyst after the first cycle reaction.Furthermore,the catalyst showed excellent reusability(up to five uses)with consistently high levels of catalytic activity following its recovery by filtration.     

新的金属氧化物纳米催化剂CuO-ZnO高效催化醇化学选择性乙酰化（英文）

A new method has been developed for the chemoselective acetylation of alcohols with acetic anhy‐dride in the presence of phenols using a novel,recyclable Cu O‐Zn O nanocatalyst.The catalyst was synthesized using the co‐precipitation method and characterized by N2 adsorption‐desorption,X‐ray diffraction,scanning electron microscopy,transmission electron microscopy and energy dis‐persion scanning analyses.Furthermore,this catalyst could be recycled up to six times without significant loss in its activity.     

二氧化硅包覆NiFe_2O_4担载Preyssler杂多酸用于合成双(二氢嘧啶酮)苯和3,4-二氢嘧啶-2(1H)-酮（英文）

A novel magnetic acidic catalyst comprising Preyssler(H14[Na P5W30O110]) heteropoly acid support‐ed on silica coated nickel ferrite nanoparticles (Ni Fe2O4@Si O2) was prepared.The catalyst was characterized by Fourier transform infrared,scanning electron microscopy,transmission electron microscopy,X‐ray diffraction,energy dispersive spectrum,VSM and particle size neasurement.Its catalytic activity was investigated for the synthesis of bis(dihydropyrimidinone)benzene and 3,4‐dihydropyrimidin‐2(1H)‐ones derivatives by the Biginelli reaction.With the catalyst,the reac‐tions occurred in less than 1 h with good to excellent yields.More importantly,the catalyst was easily separated from the reaction mixture by an external magnet and reused at least five times without degradation in the activity.     

Magnetically recyclable Pd/γ-AlOOH@Fe_3O_4 catalysts and their catalytic performance for the Heck coupling reaction

Novel magnetically recyclable Pd/γ-AlOOH@Fe3O4 catalysts were prepared using γ-AlOOH@Fe3O4 as a magnetic supporter and nano-Pd particles as the active catalytic component.The structure of the catalysts was characterized by X-ray diffraction(XRD),transmission electron microscopy(TEM),N2 adsorption-desorption,and a vibration sample magnetometer(VSM).The catalytic activity and recyclability for the Heck coupling reaction were investigated.Results showed that the magnetic γ-AlOOH@Fe3O4 possessed a core-shell structure,as well as that the nano-Pd particles were 6–8 nm and had been well dispersed in the γ-AlOOH shell.In the Heck coupling reactions,the magnetic Pd/γ-AlOOH@Fe3O4 catalysts exhibited good catalytic activity and recyclability.For the(0.021 mol%)Pd/γ-AlOOH@Fe3O4 catalyst,the bromobenzene conversion and product yield reached about 100%and 96.3%,respectively,under a 120°C reaction temperature and 12 h reaction time.After being recycled 8 times,the conversion of bromobenzene and the recovery of the catalyst were about 90%and 93%,respectively.The nano-Pd particles were kept well dispersed in the used Pd/γ-AlOOH@Fe3O4 catalyst.     

乙二胺功能化树脂负载Pd(0)配合物：可重复使用的高活性Heck芳基化催化剂

The ethylenediamine-functionalized resin-supported Pd(0)complex was prepared from PdCl_2 and ethylenedia-mine-functionalized chloromethylated polystyrene,followed by reduction with KBH_4.The complex was character-ized by FT-IR,XRD,BET,SEM and EDS.The resin-supported catalyst exhibited high catalytic activity in theHeck reaction and could be reused up to 17 times in NMP or 16 times in DMF at 90 ℃ in the Heck reaction of io-dobenzene with acrylic acid.The leaching investigation disclosed that the palladium leaching was caused by the in-teraction of iodobenzene with the metal Pd(0)on supported catalyst.The leached palladium species in filtrate wasvery stable and could be reused five times after the solid catalyst was filtered off.A cross-transfer test in recyclingin the presence of additional carbon disclosed that the soluble leached palladium species had much higher catalyticactivity than supported and/or adsorbed palladium in solid-solution heterogeneous Heck reaction.     

微波辅助溶胶-凝胶法合成MgO纳米粒子及其催化合成Hantzsch1,4-二氢吡啶性能(英文)

A microwave-assisted sol-gel method was employed for the preparetion of nano-sized MgO particles using Mg(NO 3)2·6H2O as precursor and deionized water as solvent.The sample calcined at 500℃ had a high specific surface area of 243.2m2/g and particles sizes from 9.5to10.5nm.For comparison,MgO nanoparticles were also synthesized without microwave irradiation.X-ray diffraction (XRD) characterization showed the formation of smaller particles after microwave irradiation.The structure and morphology of the MgO particles were analyzed by N2 adsorption-desorption,XRD,scanning electron microscopy,and transmission electron microscopy.Their catalytic behavior was studied with the one-pot synthesis of Hantzsch1,4-dihydropyridines from the reaction of aromatic aldehydes,ethyl acetoacetate,and ammonium acetate.The MgO nanoparticles have high catalytic activity and gave the desired products in good to high yields.The catalyst can be easily recovered by filtration and was used at least three times with only a slight reduction in its catalytic activity.     

N-Doped porous carbon supported palladium nanoparticles as a highly efficient and recyclable catalyst for the Suzuki coupling reaction

A new catalyst, Pd particles supported on the N-doped porous carbon(PC) derived from Zn-based metal–organic frameworks(zeolitic imidazolate framework: ZIF-8), was successfully prepared for the first time.The as-prepared catalyst was designated as N-doped PC-Pd, and characterized by X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, scanning electron microscope, N_2 adsorption and inductively coupled plasma atomic emission spectroscopy. The N-doped PC-Pd composite exhibited high catalytic activity toward the Suzuki–Miyaura cross-coupling reactions. The yields of the products were in the range of 90%–99%. The catalyst could be readily recycled and reused at least 6 consecutive cycles without a significant loss of its catalytic activity.     

Selective oxidation of sulfurs and oxidation desulfurization of model oil by 12-tungstophosphoric acid on cobalt-ferrite nanoparticles as magnetically recoverable catalyst

Silica-coated CoFe2O4 nanoparticles were prepared and used as a support for the immobilization of 12-tungstophosphoric acid, to produce a new magnetically separable catalyst. This catalyst was characterized using X-ray diffraction, wavelength-dispersive X-ray spectroscopy, Fourier-transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, laser par-ticle size analysis, and vibrating sample magnetometry. The catalyst showed high activity in the selective oxidation of thioethers and thiophenes to the corresponding sulfones under mild condi-tions. The catalytic activity of the nanocatalyst in the oxidative desulfurization of model oil was investigated. The effect of nitrogen-containing compounds on sulfur removal from the model oil was also evaluated. The catalyst showed high activity in the oxidative desulfurization of diesel. The cata-lyst can be readily isolated from the oxidation system using an external magnet and no obvious loss of activity was observed when the catalyst was reused in four consecutive runs.     

γ-Fe2O3固载Pd-靛红席夫碱配合物作为磁性可回收催化剂用于Heck和Suzuki交叉偶联反应（英文）

A Pd‐isatin Schiff base complex immobilized onγ‐Fe2O3 (Pd‐isatin Schiff base‐γ‐Fe2O3) was synthe‐sized and characterized by Fourier transform infrared, scanning electron microscopy, high resolu‐tion transmission electron microscopy, X‐ray diffraction, thermogravimetric gravimetric analysis, inductively‐coupled plasma, X‐ray photoelectron spectroscopy, and elemental analysis. It was used as a magnetically reusable Pd catalyst for the Heck and Suzuki cross‐coupling reactions.     

MgO纳米晶负载镍催化剂用于甲烷蒸汽重整反应(英文)

Nanocrystalline MgO with a relatively high surface area and mesoporous structure was synthesized by a surfactant assisted precipitation method for use as the support of nickel catalysts for steam reforming of methane. The samples were characterized by X‐ray diffraction, N2 adsorption, temperature‐programmed reduction, temperature‐programmed oxidation, scanning electron microscopy, and transmission electron microscopy. The catalysts showed high catalytic activity and good stability in the steam reforming of methane. Increasing the nickel loading up to 10 wt% gave increased activity. Catalysts with higher nickel loadings showed more deposited carbon after reaction. The excellent anti‐coking performance of the catalysts was attributed to the formation of a nickel‐magnesia solid solution, basicity of the support surface, and nickel‐support interaction.     

磷酸锆铁催化无溶剂条件下醇和苯酚乙酰化(英文)

Iron zirconium phosphate(ZPFe) nanoparticles were found to function as an efficient catalyst for the acetylation of a wide range of alcohols and phenols using acetic anhydride, generating good to excellent yields under solvent-free conditions. The steric and electronic properties of various sub-strates had a significant influence on the reaction conditions required to achieve the acetylation. The catalyst used in the current study was characterized by inductively coupled plasma-optical emission spectrometry, X-ray diffraction, N2 adsorption-desorption, scanning electron microscopy, and transmission electron microscopy. These analyses revealed that the interlayer distance in the catalyst increased from 7.5 to 9.3  when Fe3+ was intercalated between the layers, whereas the crystallinity of the material was reduced. This nanocatalyst could also be recovered and reused at least six times without any discernible decrease in its catalytic activity. This new method for the acetylation of alcohols and phenols has several important advantages, including mild and environ-mentally friendly reaction conditions, as well as good to excellent yields and a facile work-up.     

Ag2S-石墨烯/TiO2的声化学法合成及可见光催化活性（英文）

Ag2S‐graphene/TiO2 composites were synthesized by a facile sonochemical method.The products were characterized by X‐ray diffraction,scanning electron microscopy,energy dispersive X‐ray spectroscopy,transmission electron microscopy,and UV‐Vis diffuse reflectance spectrophotometry.During the synthesis reaction,the reduction of graphene oxide and loading of Ag2S and TiO2 particles were achieved.The Ag2S‐graphene/TiO2 composites possessed a large adsorption capacity for dyes,an extended light absorption range,and efficient charge separation properties.Hence,in the photodegradation of rhodamine B,a significant enhancement in the reaction rate was observed with the Ag2S‐graphene/TiO2 composites as compared to pure TiO2.The generation of reactive oxygen species was detected by the oxidation of 1,5‐diphenyl carbazide to 1,5‐diphenyl carbazone.The high activity was attributed to the synergetic effects of high charge mobility and the red shift in the absorption edge of the Ag2S‐graphene/TiO2 composites.     

活性炭负载硫化锡纳米颗粒作为高效可重复使用Lewis酸催化剂催化三组分一锅法合成4H-吡喃[2,3-c]吡唑衍生物(英文)

Tin sulfide nanoparticles(SnS -NPs) were prepared in aqueous solution at room temperature on the surface of activated carbon(AC) and were investigated using field-emission scanning electron mi-croscopy(FE-SEM), transmission electron microscopy(TEM), X-ray diffraction, reflective ultravio-let-visible spectrophotometry, and spectrofluorimetry. Calculations based on the SEM and TEM images showed that the sizes of the SnS -NPs immobilized on the AC were 30–70 nm. The prepared nanocomposite was used as a heterogeneous Lewis acid catalyst for the three-components one-pot synthesis of 4H-pyrano[2,3-c]pyrazole derivatives in ethanol at 80 ℃. The reactions were efficiently performed in the presence of the prepared catalyst in short reaction times, and gave the desired products in high yields. This catalyst can be easily recovered by simple filtration and recycled up to eight consecutive times without significant loss of its efficiency.     

Fabrication of Highly Conductive Pd Nanowires using PDMS Transfer Method on DNA Scaffolds through Ethanol-Reduction

We have developed a simple, productive, and ettectlve poly（cllmetnysltoxane） rranu fer method to fabricate highly conductive Pd nanowires following DNA scaffolds on various substrates, based on ethanolreduction at low temperature. Pd nanoparticles were selectively deposited and confined onto the DNA templates on a PDMS sheet to form Pd nanowires and then the nanowires were transferred to other various substrates with a low occurrence of par asitic nanoparticles. The structure, morphology and the conductance of Pd nanowires were characterized with transmission electron microscopy, field emission scanning electron mi croscopy, and electrical transport measurement, respectively. Moreover, the growth process of the Pd nanowires was investigated by varying the incubation time and reaction temper ature. The present strategy provides a new method to fabricate extremely dense, highly conductive, and well aligned Pd nanowires on various substrates, which make it promising for building nanosensors and nanoelectronic devices.     

Composite surfactants aided solvothermal synthesis and catalytic hydrogenation property of oil soluble bimetallic CoMoS nanoparticles

Oil-soluble bimetallic CoMoS nanoparticles were successfully synthesized by a composite-surfactants-aided-solvothermal process. The surface hydrophilicity and functionality of the products were investigated through transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectra, and Ultraviolet (UV) spectra analysis. The catalytic performance of hydrogenation on the CoMoS nanoparticles was studied with naphthalene as a model compound. It was found that CoMoS catalysts supported on active carbon (AC) was more active than conventional MoS2/γ-Al2O3. The activity of CoMoS/AC can be tailored through the change of the Co/(Co+Mo) atomic ratio.