Single machine batch scheduling with resource dependent setup and processing times

Jobs are processed by a single machine in batches. A batch is a set of jobs processed contiguously and completed together when the processing of all jobs in the batch is finished. Processing of a batch requires a machine setup time common for all batches. Both the job processing times and the setup time can be compressed through allocation of a continuously divisible resource. Each job uses the same amount of the resource. Each setup also uses the same amount of the resource, which may be different from that for the jobs. Polynomial time algorithms are presented to find an optimal batch sequence and resource values such that either the total weighted resource consumption is minimized, subject to meeting job deadlines, or the maximum job lateness is minimized, subject to an upper bound on the total weighted resource consumption. The algorithms are based on linear programming formulations of the corresponding problems.     

Group Scheduling with Controllable Setup and Processing Times: Minimizing Total Weighted Completion Time

The following single machine scheduling problem is studied. A partition of a set of n jobs into g groups on the basis of group technology is given. The machine processes jobs of the same group contiguously, with a sequence independent setup time preceding the processing of each group. The setup times and the job processing times are controllable through the allocation of a continuously divisible or discrete resource to them. Each job uses the same amount of the resource. Each setup also uses the same amount of resource, which may be different from that for the jobs. Polynomial-time algorithms are constructed for variants of the problem of finding an optimal job sequence and resource values so as to minimize the total weighted job completion time, subject to given restrictions on resource consumption. The algorithms are based on a polynomial enumeration of the candidates for an optimal job sequence and solving the problem with a fixed job sequence by linear programming. This research was supported in part by The Hong Kong Polytechnic University under grant number G-T246 and the Research Grants Council of Hong Kong under grant number PolyU 5191/01E. In addition, the research of M.Y. Kovalyov was supported by INTAS under grant number 00-217.     

Batch scheduling with controllable setup and processing times to minimize total completion time

We study a problem of scheduling n jobs on a single machine in batches. A batch is a set of jobs processed contiguously and completed together when the processing of all jobs in the batch is finished. Processing of a batch requires a machine setup time dependent on the position of this batch in the batch sequence. Setup times and job processing times are continuously controllable, that is, they are real-valued variables within their lower and upper bounds. A deviation of a setup time or job processing time from its upper bound is called a compression. The problem is to find a job sequence, its partition into batches, and the values for setup times and job processing times such that (a) total job completion time is minimized, subject to an upper bound on total weighted setup time and job processing time compression, or (b) a linear combination of total job completion time, total setup time compression, and total job processing time compression is minimized. Properties of optimal solutions are established. If the lower and upper bounds on job processing times can be similarly ordered or the job sequence is fixed, then O(n³ log n) and O(n⁵) time algorithms are developed to solve cases (a) and (b), respectively. If all job processing times are fixed or all setup times are fixed, then more efficient algorithms can be devised to solve the problems.     

Single-machine scheduling to minimize earliness and number of tardy jobs

This paper considers the problem of assigning a common due-date to a set of simultaneously available jobs and sequencing them on a single machine. The objective is to determine the optimal combination of the common due-date and job sequence that minimizes a cost function based on the assigned due-date, job earliness values, and number of tardy jobs. It is shown that the optimal due-date coincides with one of the job completion times. Conditions are derived to determine the optimal number of nontardy jobs. It is also shown that the optimal job sequence is one in which the nontardy jobs are arranged in nonincreasing order of processing times. An efficient algorithm of O(n logn) time complexity to find the optimal solution is presented and an illustrative example is provided. Finally, several extensions of the model are discussed.This research was supported in part by the Natural Sciences and Engineering Research Council of Canada under Grant OPG0036424. The authors are thankful to two anonymous referees for their constructive comments.     

Single machine batch scheduling to minimize the weighted number of late jobs

The single machine batch scheduling problem to minimize the weighted number of late jobs is studied. In this problem,n jobs have to be processed on a single machine. Each job has a processing time, a due date and a weight. Jobs may be combined to form batches containing contiguously scheduled jobs. For each batch, a constant set-up time is needed before the first job of this batch is processed. The completion time of each job in the batch coincides with the completion time of the last job in this batch. A job is late if it is completed after its due date. A schedule specifies the sequence of jobs and the size of each batch, i.e. the number of jobs it contains. The objective is to find a schedule which minimizes the weighted number of late jobs. This problem isNP-hard even if all due dates are equal. For the general case, we present a dynamic programming algorithm which solves the problem with equal weights inO(n ³) time. We formulate a certain scaled problem and show that our dynamic programming algorithm applied to this scaled problem provides a fully polynomial approximation scheme for the original problem. Each algorithm of this scheme has a time requirement ofO(n ³/ +n ³ logn). A side result is anO(n logn) algorithm for the problem of minimizing the maximum weight of late jobs.Supported by INTAS Project 93-257.     

Sequencing and due-date determination in the stochastic single machine problem with earliness and tardiness costs

This paper studies the problem of simultaneous due-date determination and sequencing of a set of n jobs on a single machine where processing times are random variables and job earliness and tardiness costs are distinct. The objective is to determine the optimal sequence and the optimal due-dates which jointly minimize the expected total earliness and tardiness cost. We present an analytical approach to determine optimal due-dates, and propose two efficient heuristics of order O(n log n) to find candidates for the optimal sequence. It is demonstrated that variations in processing times increase cost and affect sequencing and due-date determination decisions. Our illustrative examples as well as computational results show that the proposed model produces optimal sequences and optimal due-dates that are significantly different from those provided by the classical deterministic single machine models. Furthermore, our computational experiments reveal that the proposed heuristics perform well in providing either optimal sequences or good candidates with low overcosts.     

Optimal Assignment of Total-work-content Due-dates and Sequencing in a Single-machine Shop

This paper considers the problem of optimal assignment of total-work-content due-dates to n jobs and of sequencing them on a single machine to minimize an objective function depending on the assigned due-date multiple value and maximum tardiness penalty. It is shown that both the earliest due-date and shortest processing time orders yield an optimal sequence. A simple analytical solution method is presented to find the optimal due-dates. After the theoretical treatment an illustrative example is presented for discussion.     

订单带多工类工件时的极小迟后范围问题

本文考虑下述由多工类工件组成的订单的单机排序问题：每一个客户提供一个由若干工件组成的订单,总共n个工件又分成k个类．当机器从加工某类中的工件转向加工不同于它的第i类工件时,需一调整时间si．每一订单有一给定的应交工时间,订单的完工时间定义为该定单所含全部工件完工时的时间．我们希望适当排列这n个工件,使得订单的迟后范围最小．相应这一排序问题,文中依不同的背景给出了以下二种模式：同类工件一起连续加工,工件的完工时间为其所属类中全部工件完工时的时间,用GT,Ba来表示；同类工件一起连续加工,工件的完工时间为其本身的完工时间,用GT,Ja来表示．对于这两种模式的排序同题,我们均证明了其NP-hard性并给出了对应的分枝定界算法．     

Batch scheduling and common due-date assignment on a single machine

We consider the problem of scheduling n groups of jobs on a single machine where three types of decisions are combined: scheduling, batching and due-date assignment. Each group includes identical jobs and may be split into batches; jobs within each batch are processed jointly. A sequence independent machine set-up time is needed between each two consecutively scheduled batches of different groups. A due-date common to all jobs has to be assigned. A schedule specifies the size of each batch, i.e. the number of jobs it contains, and a processing order for the batches. The objective is to determine a value for the common due-date and a schedule so as to minimize the sum of the due date assignment penalty and the weighted number of tardy jobs. Several special cases of this problem are shown to be ordinary NP-hard. Some cases are solved in O(n log n) time. Two pseudopolynomial dynamic programming algorithms are presented for the general problem, as well as a fully polynomial approximation scheme.     

Minmax scheduling problems with common flow-allowance

In due-date assignment problems with a common flow-allowance, the due-date of a given job is defined as the sum of its processing time and a job-independent constant. We study flow-allowance on a single machine, with an objective function of a minmax type. The total cost of a given job consists of its earliness/tardiness and its flow-allowance cost components. Thus, we seek the job schedule and flow-allowance value that minimize the largest cost among all the jobs. Three extensions are considered: the case of general position-dependent processing times, the model containing an explicit cost for the due-dates, and the setting of due-windows. Properties of optimal schedules are fully analysed in all cases, and all the problems are shown to have polynomial time solutions.     

The coordination of transportation and batching scheduling

We study a coordinated scheduling problem of production and transportation in which each job is transported to a single batching machine for further processing. There are m vehicles that transport jobs from the holding area to the batching machine. Each vehicle can transport only one job at a time. The batching machine can process a batch of jobs simultaneously where there is an upper limit on the batch size. Each batch to be processed occurs a processing cost. The problem is to find a joint schedule of production and transportation such that the sum of the total completion time and the total processing cost is optimized. For a special case of the problem where the job assignment to the vehicles is predetermined, we provide a polynomial time algorithm. For the general problem, we prove that it is NP-hard (in the ordinary sense) and present a pseudo-polynomial time algorithm. A fully polynomial time approximation scheme for the general problem is obtained by converting an especially designed pseudo-polynomial dynamic programming algorithm.     

极小化最大完工时间的单机分批加工问题

本文考虑极小化最大完工时间的单机分批加工问题．设有n个工件和一台批加工机器．每个工件有一个释放时间和一个加工时间．批加工机器可以同时加工b(b相似文献   

Approximation algorithms for two-machine flow shop scheduling with batch setup times

In many practical situations, batching of similar jobs to avoid setups is performed while constructing a schedule. This paper addresses the problem of non-preemptively scheduling independent jobs in a two-machine flow shop with the objective of minimizing the makespan. Jobs are grouped into batches. A sequence independent batch setup time on each machine is required before the first job is processed, and when a machine switches from processing a job in some batch to a job of another batch. Besides its practical interest, this problem is a direct generalization of the classical two-machine flow shop problem with no grouping of jobs, which can be solved optimally by Johnson's well-known algorithm. The problem under investigation is known to be NP-hard. We propose two O(n logn) time heuristic algorithms. The first heuristic, which creates a schedule with minimum total setup time by forcing all jobs in the same batch to be sequenced in adjacent positions, has a worst-case performance ratio of 3/2. By allowing each batch to be split into at most two sub-batches, a second heuristic is developed which has an improved worst-case performance ratio of 4/3. © 1998 The Mathematical Programming Society, Inc. Published by Elsevier Science B.V.     

Fabrication scheduling on a single machine with due date constraints

There is a fabrication machine available for processing a set of jobs. Each job is associated with a due date and consists of two parts, one is common among all products and the other is unique to itself. The unique components are processed individually and the common parts are grouped into batches for processing. A constant setup time is incurred when each batch is formed. The completion time of a job is defined as the time when both of its unique and common components are completed. In this paper, we consider two different objectives. The first problem seeks to minimize the maximum tardiness, and the second problem is to minimize the number of tardy jobs. To minimize the maximum tardiness, we propose a dynamic programming algorithm that optimally solves the problem in polynomial time. Next, we show NP-hardness proof and design a pseudo-polynomial time dynamic programming algorithm for the problem of minimizing the number of tardy jobs.     

工件可自由下线最小化总完工时间的平行分批排序问题

考虑工件可自由下线最小化总完工时间的有界平行分批排序问题. 在该问题中, 一台平行批机器可以同时处理 b 个工件作为一个平行批, 这里b 是批容量, 一个批的加工时间等于分配给这个批的工件的最大加工时间. 关于可自由下线工件, 每一个工件的完工时间等于包含这个工件的批的开工时间与工件的加工时间的和. 也就是, 如果一个批B 有一个开工时间S, 那么包含在批B 中的每一个工件J_j 的开工时间定义为S, 而它的完工时间定义为S+p_j, 这里p_j 是工件J_j 的加工时间. 对此问题, 首先研究最优排序的一些性质. 然后, 基于这些性质, 给出一个运行时间为O(n^{b (b-1)})的动态规划算法.     

Single machine group scheduling with resource dependent setup and processing times

A single machine scheduling problem is studied. There is a partition of the set of n jobs into g groups on the basis of group technology. Jobs of the same group are processed contiguously. A sequence independent setup time precedes the processing of each group. Two external renewable resources can be used to linearly compress setup and job processing times. The setup times are jointly compressible by one resource, the job processing times are jointly compressible by another resource and the level of the resource is the same for all setups and all jobs. Polynomial time algorithms are presented to find an optimal job sequence and resource values such that the total weighted resource consumption is minimum, subject to meeting job deadlines. The algorithms are based on solving linear programming problems with two variables by geometric techniques.     

An iterative approach for the serial batching problem with parallel machines and job families

In this paper, we consider a parallel machine scheduling problem to minimize the total completion time. Each job belongs to a certain family. All jobs of one family have identical processing times. Major setups occur between jobs of different families, and we include sequence dependencies. Batches of jobs belonging to the same family can be formed to avoid these setups. Furthermore, we assume serial batching and batch availability. Therefore, the processing time of a batch is the sum of the processing times of all jobs grouped into the corresponding batch. An iterative method is developed for solving this specific problem. This approach alternates between varying batch sizes using an efficient heuristic and sequencing batches based on variable neighborhood search (VNS). Computational results demonstrate that the iterative heuristic outperforms heuristics based on a fixed batch size and list scheduling.     

Optimal Due-Date Determination and Sequencing of <Emphasis Type="Italic">n</Emphasis> Jobs on a Single Machine

Given a set of n jobs with deterministic processing times and the same ready times, the problem is to find the optimal processing-time multiple k* for the T.W.K. due-date assignment method, and the optimal sequence σ* to minimize the total amount of missed due-dates. It is found that k* is a constant for a given job set and σ* should be in S.P.T. sequence. After the theoretical treatment, a numerical example is given for discussion. The optimal results can readily be extended to situations in which the processing times are random variables with known means and having the same coefficient of variation. From a practical point of view, the main merit of this paper is that it demonstrates how, under certain production environments in which completion times of the jobs can be anticipated, to determine the optimal due-dates and obtain the optimal sequence.     

分类数很大时的成组排序问题

成组排序具有深刻的实际应用背景,是近年来国外研究得较多的一个热点.已有的某些动态规划算法的复杂性随分类数的增长呈指数型增长趋势,本文用“归并”和解不超过四个新的子问题的方法把分类数较大时的问题转化为分类数较小时的相应问题,简化了问题的求解.     

无限批量调度中最小化加权完工时间和问题的一个线性时间近似方案

本文考虑n个工件的无限批量机器调度问题．一台机器可以同时加工B≥n个工件．每个工件具有一个正权因子、一个释放时间和一个加工时间．一个批次的加工时间是该批次所包含所有工件的加工时间的最大者．在同一批次中加工的工件有相同的完工时间，即它们的共同开始时间加上该批次的加工时间．对于最小化加权完工时间和问题，本文给出了第一个多项式时间近似方案(PTAS)．对任意给定精度，该算法的运行时间为线性的．