柱色谱/气相色谱分析Fischer-Tropsch合成液相产物

以两步柱液体色谱法对F-T合成(Fischer-Tropsch synthesis)液相产物冷阱油进行预处理,获得烷烃、烯烃及有机含氧化合物的族分离,并采用高分辨毛细管柱气相色谱对各族成分进行分离鉴定。组分定性采用以纯物质为基准,色谱保留值比较并辅以碳数保留值规律法;定量采用峰面积校正因子归一法。本文提供了冷阱油中63个组分的测定结果,占总含量达80%以上     

糖类化合物在两性离子亲水作用色谱柱上的保留行为评价

糖类化合物因其极性强,在反相色谱模式下保留较弱,因此常用亲水作用色谱(HILIC)对其进行分离分析。本文以9种糖类化合物的混合物为研究对象,系统评价了其在Click TE-Cys亲水色谱柱上的保留行为,分别考察了流动相中有机相比例和盐浓度对其保留行为的影响。实验证明:9种糖类化合物按极性由小到大的顺序依次从Click TE-Cys色谱柱上被洗脱下来。随着有机相比例的增加,糖类化合物的保留增强;随着盐浓度的增加,除唾液酸外的糖类化合物的保留增强。用顶替-吸附液相相互作用模型模拟了糖类化合物在HILIC上的保留行为,采用保留方程ln k=a+blnC_B+cC_B描述HILIC的保留规律,对HILIC的保留值进行多元线性回归。结果表明糖类化合物在Click TE-Cys色谱柱上的保留行为符合HILIC的保留规律。     

气相色谱法测定车用汽油中含氧化合物和苯胺类化合物

利用中心切割技术和双毛细管色谱柱系统,采用两次进样的方式,建立了气相色谱测定车用汽油中含氧化合物和苯胺类化合物的分析方法。第一次进样分析,组分首先进入非极性DB-1色谱柱(30 m×0.32 mm×1.0μm),按沸点由低到高的顺序分离,通过电磁阀切换将沸点小于2-己酮的组分切割至强极性GS-OxyPLOT色谱柱(10 m×0.53 mm×10μm)或CP-Lowox色谱柱(10 m×0.53 mm×10μm),其余重烃组分通过阻尼柱进入FID检测器。在GS-OxyPLOT或CP-Lowox色谱柱上,烃类组分与含氧化合物分离并进入检测器检测,消除了大量的烃类组分对含氧化合物测定的影响。第二次进样分析,设定电磁阀切换时间为间-甲基苯胺从非极性色谱柱流出的时间,苯胺类化合物在GS-OxyPLOT或CP-Lowox色谱柱上与烃类和含氧化合物分离并进入检测器检测。以乙二醇二甲基醚为内标化合物进行内标法定量。实现了在一套系统上同时测定车用汽油中添加的甲基叔丁基醚(MTBE)、甲醇、甲缩醛、乙酸仲丁酯、乙酸乙酯、苯胺、邻/间/对-甲基苯胺和N-甲基苯胺的含量,各组分的检测范围为0.01%~10%(质量分数),回收率为86.0%~102.6%。该法可以为车用汽油的质量控制提供有效的检测手段。     

含氧化合物气相色谱保留指数的预测

通过对部分含氧化合物(醇、酯、醛、酮)在不同固定相不同柱温下的849个样本的气相色谱保留指数值(RI)与其部分参数:拓扑指数(mQ)、定位基参数(Sox)、固定液极性值(CP)及柱温(T)建立定量结构-色谱保留相关(QSRR)模型。分别利用多元线性回归(MLR)、偏最小二乘回归(PLSR)、人工神经网络(ANN)建模,同时采用内部及外部双重验证的办法对所得模型稳定性能进行深入分析和检验,建模计算值、留一法(LOO)交互检验(CV)预测值和外部样本预测值的复相关系数Rcum、QLOO和Rext分别为0.9832、0.9829和0.9836(MLR);0.9832、0.9830和0.9836(PLSR);0.9910、0.9909和0.9900(ANN)。结果表明:所建定量结构保留关系(QSRR)模型具有良好的稳定性和预测能力,较好地揭示了含氧化合物(醇、酯、醛、酮)在不同色谱条件下气相色谱保留指数的变化规律。     

基于共价－有机骨架固定相的色谱分离应用研究进展

共价－有机骨架材料（COFs）是一类由轻质元素通过共价键形成的多孔材料,具有比表面积大、稳定性好、孔径可调、功能多样、结构可修饰等特点,在分析化学领域如样品前处理和色谱分离等方面显示出了良好的应用前景。其中COFs作为新颖色谱固定相在高效液相色谱、气相色谱和毛细管电色谱分离应用研究也逐渐引起了人们的关注。色谱分离所用COFs均具有良好的化学稳定性,但比表面积、孔径和性质各异,适用于分离不同类型的目标物如有机小分子、同分异构体和手性化合物等。该文综述了近年来以COFs为固定相的色谱分离应用研究进展,包括基于COFs的色谱固定相/色谱柱的制备及其色谱分离应用,并对其进行了展望。     

轻质烃类中微量甲醇、甲基叔丁基醚等含氧化合物的测定

在乙烯厂生产中微量含氧化合物的测定非常重要,含氧化合物的存在可引起催化剂中毒,致使生产不能长周期运行。对乙烯、丁烯-1中含氧化合物的测定已有报道。但随着仪器和数据处理设备的更新有些缺陷就显现出来。近年来,毛细管色谱柱在含氧化合物的测定上也得到应用,但所使用的极性柱对甲醇、甲基叔丁基醚（MTBE）等含氧化合物分析时常有C3,C4和C5等烃类的干扰,在分析实际样品时会有合峰出现,无法得到准确结果。本文采用超强极性的LOWOX色谱柱,可以排除轻质烃类的干扰,降低检出限。     

超临界流体色谱与高效液相色谱分离手性化合物的比较

超临界流体色谱(SFC)分离具有速度快、分离效率高、溶剂消耗少等优点,近年来在手性化合物的分离分析中得到诸多应用。本文对比研究了涂覆型多糖手性色谱柱在SFC和高效液相色谱(HPLC)上拆分24种手性化合物的差异。通过比较这些化合物在色谱柱上的保留时间和选择因子等发现多数化合物在SFC上的分离效率要高于其在HPLC上的分离效率,但HPLC对轴手性化合物的分离效率要优于SFC。SFC和HPLC的分离表现出一定的互补性,随着苯环侧链烷基的碳数增加,化合物在SFC上的保留逐渐增强,而在HPLC的保留却逐渐减弱。叶菌唑在使用SFC和HPLC分析时出现了洗脱顺序反转的现象。这些结果为SFC手性拆分提供了参考。     

高效液相色谱柱清洗与再生方法

分别对反相、正相、离子交换、体积排阻及亲和等色谱柱的清洗与再生方法加以系统综述.使用适当的方法对受污染的色谱柱进行清洗与再生,可恢复其部分分离能力,延长使用寿命.对硅胶基质反相色谱柱,可选择一系列溶剂,按洗脱能力逐渐增强的顺序依次冲洗,或者使用二甲基甲酰胺、乙酰丙酮、SDS及盐酸胍等强洗脱试剂清洗;硅胶基质正相色谱柱用极性逐渐增强的溶剂系统冲洗;有机聚合物、石墨碳及氧化锆固定相色谱柱,用稀酸、稀碱和有机溶剂结合清洗,可将受污染的色谱柱柱效提高50%以上.     

新型有机-无机杂化整体柱的制备及其在毛细管液相色谱及加压毛细管电色谱中的应用

以丙烯酰胺(AM)为单体,八乙烯基倍半硅氧烷(POSS)为交联剂,偶氮二异丁腈(AIBN)为引发剂,四氢呋喃(THF)为致孔剂,通过原位聚合法制备了poly(POSS-co-AM)有机-无机杂化整体柱,并对各反应物的配比进行了优化。结果表明,当功能单体与致孔剂、POSS与AM的质量比均为1.0: 5.0, AIBN的质量分数为0.1%时,杂化整体柱的柱效最高。无机材料的引入使整体柱结构均匀并具有良好的渗透性,该整体柱既能用于亲水色谱模式,也能用于反相色谱模式。将制备的整体柱用于毛细管液相色谱和加压毛细管电色谱分离核苷类、胺类、硝基苯胺类等化合物,获得了良好的效果。     

近几年国内外气相色谱固定相的进展

最近几年气相色谱的进展放缓,但是气相色谱固定相的发展有所突破,即室温离子液体的研究和商品化;金属有机框架化合物用于气相色谱固定相的研究有很大进展;碳纳米管作气相色谱固定相的研究也所发展。本文将对近年国内外这3个方面气相色谱柱(固定相)的进展作一综述评论。     

The pre‐separation of oxygen containing compounds in oxidised heavy paraffinic fractions and their identification by GC‐MS with supersonic molecular beams.

The heavy petroleum fractions produced during refining processes need to be upgraded to useable products to increase their value. Hydrogenated heavy paraffinic fractions can be oxidised to produce high value products that contain a variety of oxygenates. These heavy oxygenated paraffinic fractions need to be characterised to enable the control of oxidation processes and to understand product properties. The accurate identification of the oxygenates present in these fractions by electron ionisation (EI) mass spectrometry is challenging due to the complexity of these heavy fractions. Adding to this challenge is the limited applicability of EI mass spectral libraries due to the absence of molecular ions from the EI mass spectra of many oxygenates. The separation of oxygenates from the complex hydrocarbon matrix prior to high temperature GC‐MS (HT‐GC‐MS) analysis reduces the complexity of these fractions and assists in the accurate identification of these oxygenates. Solid phase extraction (SPE) and supercritical fluid chromatography (SFC) were employed as prefractionation techniques. GC‐MS with supersonic molecular beams (SMBs) (also named GC‐MS with cold‐EI) utilises a SMB interface with which EI is done with vibrationally cold sample compounds in a fly‐through ion source (cold‐EI) resulting in a substantial increase in the molecular ion signal intensity in the mass spectrum. This greatly enhances the accurate identification of the oxygenates in these fractions. This study investigated the ionisation behaviour of oxygenated compounds using cold‐EI. The prefractionation by SPE and SFC and the subsequent analysis with GC‐MS with cold‐EI were applied to an oxygenated heavy paraffinic fraction.     

Temperature requirements for thermal modulation in comprehensive two-dimensional gas chromatography

Temperature requirements for trapping and release of compounds in a cryogenic gas loop-type GC x GC modulator were determined. Maximum trapping temperatures on the uncoated, deactivated modulator capillary were determined for compounds from C4 (bp -0.5 degrees C) to C40 (bp 522 degrees C). The liquid-nitrogen cooled gas flow rate was reduced from a high of 15.5 to 1.5 SLPM over the range to achieve the required trapping temperature. Excessive cold jet flow rates caused irreversible trapping and peak tailing for semi-volatile compounds above C26. Alternate cold jet coolants were investigated. An ice water-cooled jet was able to trap compounds with boiling points from C18 (bp 316 degrees C) to C40 and a room temperature air-cooled jet was able to trap compounds from C20 (bp 344 degrees C) to C40. The hot jet produced launch temperatures approximately 40 degrees C hotter than the elution temperature with heating time constants of 8 to 27 ms. Modulated compound peaks were symmetrical with half-height peak widths of 43 to 56 ms for compounds with little second column retention, and 70 to 75 ms for compounds with more second column retention. The liquid nitrogen-cooled loop modulator with gas flow programming was used to produce a GC x GC chromatogram for a crude oil that contained compounds from C7 to C47.     

Use of ZSM-5 catalyst in deoxygenation of waste cooking oil

This study investigated the potential use of waste cooking oil (WCO) in the production of engine fuels and valuable chemicals via catalytic cracking. WCO was processed in its pure form and in a mixture with hydrotreated vacuum gas oil (HVGO). Catalytic cracking experiments were performed using a microactivity test (MAT) (simulation of the fluid catalytic cracking environment). In cracking over the standard fluid catalytic cracking equilibrium catalyst (FCC-ECAT), the oxygen contained in the feed was consumed in the formation of CO and CO₂, water and into oxygenated organic compounds (phenolics, esters, carboxylic acids, etc.), which were found in the organic phase of the liquid product. In order to remove the unwanted organic oxygenates, the catalytic system based on pure FCC-ECAT was modified by addition of the ZSM-5-based FCC catalyst. By using the mixture containing FCC-ECAT and 10 mass % of FCC-ZSM-5, it was possible to reduce the amount of organic oxygenates to almost the feasible minimum when cracking pure WCO. The effect of the catalyst mixture on cracking the feed mixture of the vacuum gas oil with 10 vol. % of WCO was manifested in the practically zero formation of organic oxygenates and in a gasoline yield comparable with vacuum gas oil (VGO) cracking.     

Comprehensive two‐dimensional GC for the analysis of low‐molecular‐weight oxygenates in three different matrices from a petrochemical pilot plant using a single calibration

A method using comprehensive ²DGC with flame ionisation detection was developed to quantify 17 low‐molecular‐weight oxygenates in three different matrices, namely water, oil and gas, using a single calibration. The method was required for the pilot‐plant experiments of a chemical process unit. From an analytical perspective, the first task was to find a suitable analytical method with sufficient selectivity and sensitivity to analyse the selected oxygenates at low levels in the presence of high levels of hydrocarbons. The second was the accurate quantitation of oxygenates in the water, oil and gas fractions, using the same instrument and calibration. Both these requirements were met by using comprehensive ²DGC in the inverse configuration and calibrating the detector with the number of moles injected versus response. The method was successfully applied for the characterisation of the reactor product stream of the chemical process unit and made it possible to determine the fate of the selected oxygenates after passing through the reactor. The development of the method and some of the results are described in this paper.     

Thermal desorption cold trap-injection in high-resolution gas chromatography: multivariate optimization of experimental conditions.

In studies of low concentrations of volatile compounds in air, the method of adsorption on porous polymers and determination by thermal desorption cold trap-injection high-resolution gas chromatography is finding increasing application. Factors considered important for injection and chromatographic separation of volatile compounds by this method were investigated with the use of multivariate techniques. For the amount injected on to the chromatographic column, the factors of main importance were found to be the temperature of the injection block, the thickness of the internal coating of the cold trap and the flow-rate. Strong interaction effects were noted. For the sharpness of the chromatographic peaks, the flow-rate was the most important factor.     

The Use of the Helium Ionization Detector for Gas Chromatographic Monitoring of Trace Atmospheric Components

Two different gas chromatographic detectors, the helium ionization detector (HID) and the more commonly used flame ionization detector (FID), were used in parallel to compare their responses to a number of organic compounds. Atmospherically important oxygenated species were analyzed, as well as hydrocarbons and chlorinated and sulfur containing organics. The HID exhibited the better response to all compounds investigated, most notably to formaldehyde and higher oxygenates. A gas chromatographic system was developed to trap and analyze atmospheric organic compounds with HID detection. This required careful choice of the adsorbent material and removal of inorganic components (namely nitrogen and oxygen) before analysis. Real air samples were then taken and analyzed qualitatively for a range of olefinic and aromatic compounds.     

Study on volatile components in salami by reverse carrier gas headspace gas chromatography-mass spectrometry

Salami are a typical seasoned sausage of Italy; a number of types are produced, according to local traditional recipes. As industrial production has taken place, a number of problems rise in obtaining products similar to the traditional ones. The use of selected microbial starters is permitted by Italian law for some years and at present, microbiological research is engaged in selecting starters similar to the ones isolated from traditional products, with the aim of obtaining organoleptic characteristics close to the ones of traditional recipes. A study was carried out concerning the characterisation of volatile components of salami by headspace capillary gas chromatography-mass spectrometry. As during the sampling step, analytes could reach the analytical column, the carrier gas rate was back flushed in the latter, while a pre column was used as cold trap. Then GC-MS analysis follows. By these techniques, we were able to highlight typical profiles of different salami, as well as monitoring the ripening of a traditional and a starter added salami. Main peaks are of fermentative origin, while also peaks from spices were detected. Ethyl propionate was used as internal standard to be able to normalise the peaks amounts.     

固相萃取-气相色谱法测定合成气制烯烃产物中的含氧化合物

采用C18固相萃取技术对合成气制烯烃(SGTO)的产物进行预处理,将产物分离为含氧化合物与烃类,采用气相色谱-质谱法(GC-MS)考察分离效果并鉴定产物中的含氧化合物,使用氢焰离子化检测(FID)定量实际样品中的含氧化合物,使用其正构2-酮、正构醇的响应因子作为同碳数酮、醇的FID响应因子。优化C18小柱洗脱条件,使用标准样品比较预处理前后的方法回收率。醇类标准品回收率为88%~98%,酮类标准品回收率为64%~87%。在197~4785 mg/L范围内,标准品具有较好的线性关系,相关系数均大于0.99。定性并定量测定了SGTO产物中的67种含氧化合物,发现正构醇、正构2-酮为SGTO产物中的主要含氧化合物,同时存在少量其他异构体。该方法操作简单、快速、样品需求量小,并能够在10 min内完成样品的预处理。分析结果为SGTO工艺催化剂、动力学深入研究提供了必要的基础数据。     

二阶梯度升温热解吸法测定空气中的微量丙烯腈和乙腈

采用气体采样泵将空气样品的丙烯腈和乙腈吸附到吸附管中,用二阶梯度升温将吸附管中的被测物质解吸到冷阱中,再快速对冷阱升温,将冷阱中的被测物质解吸进入色谱柱进行分离,用气相色谱氢火焰检测器检测空气中的微量丙烯腈和乙腈。丙烯腈、乙腈的色谱峰面积与吸附质量的线性相关系数均大于0.995。该法对实际空气样品中丙烯腈的检出限为5μg/m3,乙腈的检出限为10μg/m3,加标回收率均大于90%。     

Comprehensive two-dimensional gas chromatography for fast screening of wash oils

Fast screening of wash oils is demonstrated using comprehensive two-dimensional gas chromatography (GCxGC). Wash oils are used in ethylene production plants to minimize compressor fouling. The composition of a wash oil determines its effectiveness in solubilizing heavy hydrocarbons. In particular, the relative amount of 1- and 2-ring aromatics is important. The presence of oxygenates is undesirable because of adverse effects to the process. It is shown that GCxGC is well suited for this application. Species in wash oils are separated and grouped into three bands: a nonpolar aliphatics band, 1- and 2-ring aromatics band, and polyaromatics band. For a given polar secondary column, the spacing between bands in the second dimension can be adjusted in a broad range by selecting a primary column and an oven-temperature-programming rate. Integration of GCxGC peaks is evaluated using a standard GC integration program and a new GCxGC integration program. Consistent results are obtained using both programs for well-separated GCxGC peaks with relative differences for individual peak ranging from 0.04% to 1.6%. Peak responses are integrated by the GCxGC software, and the relative amounts of aromatics content and aliphatics content are estimated by peak response percent with relative standard deviations ranging from 0.15% to 2.8% (n = 3).