Determination of diclofenac in pharmaceuticals and urine samples using a membrane sensor based on the ion associate of diclofenac with Rhodamine B

The potentiometric response characteristics of a diclofenac selective electrode, based on ion association in different plasticizers, were compared. The sensitivity, working range, detection limit and selectivity of membrane sensors demonstrated significant dependence on the type of plasticizers. The potentiometric unit presented a linear response toward diclofenac concentrations between 1 × 10⁻⁵ − 5 × 10⁻² mol L⁻¹, with slopes of approximately 60 mV dec⁻¹, and exhibited a response time of 3 s. The potentiometric analysis of sodium diclofenac in pharmaceutical formulations was perfomed by the membrane electrode proposed and compared with the results of potentiometric titration given by the Pharmacopoeia of Ukraine.      

Electrochemical oxidation of methylthiomethyleneisoquinolinium chloride — the first water soluble alkylthiomethylene substituted ammonium salt

Electrochemical oxidation of methylthiomethyleneisoquinolinium chloride (MTMIQ), the first alkylthiomethyl substituted ammonium salt, which is fully miscible with water has been investigated by voltammetric (SWV) method using glassy carbon electrode. On the electrode, MTMIQ undergoes oxidation at the potential near Ep = 0.07V (vs. Ag/AgCl/3 M KCl). The influence of the pH of buffers, amplitude, frequency, step potential on the received signal was studied. The best results were obtained with a citrate buffer at a pH of 5. The oxidation peak current used for MTMIQ voltammetric determination was in the range of 2–8×10⁻⁵ mol L⁻¹, LOD = 3.7×10⁻⁶, LOQ = 1.2×10⁻⁵. The product of the oxidation was accumulated at the working electrode and was investigated by spectroscopic method. Mechanistic pathways of the oxidation have been proposed.      

Cobalt(II) ion-selective electrode with solid contact

A new all plastic sensor for Co²⁺ ions based on 2-amino-5 (hydroxynaphtyloazo-1′)-1,3,4 thiadiazole (ATIDAN) as ionophore was prepared. The electrode exhibits a low detection limit of 1.5 × 10⁻⁶ mol L⁻¹ and almost theoretical Nernstian slope in the activity range 4.0 × 10⁻⁶–1 × 10⁻¹ mol L⁻¹ of cobalt ions. The response time of the sensor is less than 10 s and it can be used over a period of 6 months without any measurable divergence in potential. The proposed sensor shows a fairly good selectivity for Co(II) over other metal ions. The electrode was successfully applied for determination of Co²⁺ in real samples and as an indicator electrode in potentiometric titration of Co²⁺ ions with EDTA.      

Ceramic materials made of CdTe and Cd-Zn-Te nanocrystalline powders

In the present study newly produced semiconductor ceramic nanopowder materials made of CdTe and Cd_1−xZn_xTe (CZT) are considered. Common features and differences in microstructures, phase transformations, grain growth and properties of the ceramic materials of the binary and ternary compositions are studied.      

Voltammetric and amperometric determination of metoclopramide on boron-doped diamond film electrode

New methods for the determination of metoclopramide, antiemetic and gastroprokinetic pharmaceutical, were developed, using differential pulse voltammetry (DPV) and flow injection analysis (FIA) with amperometric detection on a boron-doped diamond film electrode. Electrode pretreatment necessary to ensure the stable results was investigated and it was found, that while DPV requires frequent electrode cleaning, FIA with a sufficiently high flow rate can maintain a stable signal with no signs of electrode passivation. The calculated quantification limits of the DPV and FIA with amperometric detection were 0.13 μmol L⁻¹ and 0.015 mmol L⁻¹, respectively. The applicability of the new methods was verified by the determination of metoclopramide in a pharmaceutical preparation. FIA with amperometic detection proved to be sensitive, accurate and, due to the resistance of the electrode to the passivation, also simple to handle.      

Determination of europium by using the chemical oscillating system of Ce(IV)-KBrO<Subscript>3</Subscript>-acetone-oxalic acid-H<Subscript>2</Subscript>SO<Subscript>4</Subscript>

A sensitive and convenient method for the determination of trace europium ions using an oscillating chemical reaction involving Ce(IV) - KBrO₃ - acetone - oxalic acid - H₂SO₄ was proposed. The results indicated that the changes in oscillating period (T) was linearly proportional to the negative logarithmic concentration of Eu³⁺ (-log C) in the range of 1.41 × 10⁻⁸ ˜ 1.41 × 10⁻⁴ mol L⁻¹ (r = 0.9982) with a detection limit of 1.04 × 10⁻⁹ mol L⁻¹. The recoveries were limited to the range of 99.5% to 100.8%. Under the same conditions, other rare earth ions did not interfere with the determination of Eu³⁺. In addition, a perturbation mechanism was also discussed briefly.      

Kinetic spectrophotometric determination of hydrazine

A kinetic spectrophotometric method for hydrazine determination in the range of 9.36×10⁻⁷ to 4.37×10⁻⁵ mol dm⁻³, based on the inhibitory effect of hydrazine on the oxidation of Victoria Blue 4- R by KBrO₃, was developed and validated. Kinetic parameters are reported for both the indicating and the inhibiting reaction. The detection limit was established as 9.98×10⁻⁸ mol dm⁻³. The selectivity of the proposed method was tested considering the influence of different ions that may be present in real samples. The method was successfully applied for hydrazine determination in various samples (very pure water from the water-steam system of a power plant and Isoniazid tablets, a pharmaceutical product).      

Ionic liquid promoted Diels-Alder Reaction between anthrone and maleimides

Ionic liquids (IL) are gaining importance as green solvents. Imidazolium ionic liquid [bmim]⁺[Cl]⁻, an environmentally benign solvent, was found to promote the Diels-Alder reaction between anthrone and maleimides at room temperature with excellent yields. The ionic liquid played a dual role as solvent and catalyst.      

Indirect determination of lutetium by differential pulse anodic stripping voltammetry at a hanging mercury drop electrode

Lutetium has been determined by differential pulse anodic stripping voltammetry in an acidic solution containing Zn-EDTA. Lutetium (III) ions liberated zinc (II), which was preconcentrated on a hanging mercury drop electrode and stripped anodically, resulting in peak current linearly dependent on lutetium (III) concentration. Less than 0.4 ng mL⁻¹ lutetium could be detected after a 2 min deposition.      

Immobilization of quaternary ammonium salts on silica gel for perchlorate ions removal

Silica surface was modified with quaternary ammonium salts to give three matrices of different chain length. The synthesized supports were characterized by elemental analysis and infrared spectroscopy, as well as scanning electron microscopy and semi-empirical parametric method 5. Their exchange capacities for ClO₄ ⁻, F⁻, NO₃ ⁻ and CH₃COO⁻ ions were investigated by conductometric titration. The amount of exchanged chloride ions from the matrix was studied for different initial anions concentration. The functionalized silica gel showed very good ability of perchlorate ions exchange from the water solution in room temperature. The anion-exchange properties were also studied in comparison to different number of reactive sites in the matrices. The increased number of chloride at the silica surface took effect on increased ability of ClO₄ ⁻ anion exchange      

Properties of naproxen ion-selective electrodes

Naproxen membrane electrodes based on different plasticizers and the quaternary ammonium salts (QASs) dimethyldidecylammonium bromide, methyltrioctylammonium chloride, or tetraoctylammonium chloride, were prepared. The following basic parameters were investigated for the optimal electrode: measurement range (10⁻⁴ − 10⁻¹ mol L⁻¹), slope of the linear range of the calibration curve (−58.3 mV decade⁻¹), limit of detection (6.0 × 10⁻⁵ mol L⁻¹), lifetime (2.5 months), dependence of the electrode potential on pH (5.5 − 9.0), reproducibility of potential (1.2 mV) and selectivity coefficients in relation to selected organic and inorganic anions. The electrode was utilized for determination of naproxen in tablets by the calibration curve method and the standard addition method.      

Pyrrole thin films deposited on paper by pulsed RF plasma

Attempts were made to plasma deposit an oriented π-conjugated polymer of pyrrole (Py) on paper surfaces in order to produce electrically conductive layers. The N/C atomic ratio of 0.13–0.24 was observed for all treatment conditions. This implies the nature of the deposition formed on the paper surface via pulsed plasma is different from that of pyrrole monomer. An increase in conductivity of all pyrrole-plasma treated papers was observed. The 50 W RF-power with 5 min plasma exposed paper sample shows 8.15 × 10⁻⁹ S·cm⁻¹ conductivity. The conductivity measurements indicated a plasma-enhanced ring-opening reaction mechanism of pyrrole.      

Properties of ibuprofen ion-selective electrodes based on the ion pair complex of tetraoctylammonium cation

Ibuprofen membrane electrodes based on different plasticizers: diisobutyl phthalate (DIBP), o-nitrophenyloctyl ether (o-NPOE), dioctyl sebacate (DOS) and tetraoctylammonium 2-(4-isobutylphenyl)propionate were prepared. All electrodes show: a near Nernstian slope of characteristic (58.3–60.9 mV decade⁻¹) in the measurement range (10⁻⁴–10⁻¹ mol L⁻¹), limit of detection (5.0×10⁻⁵ mol L⁻¹), really long lifetime (12 months), dependence of the electrode potential on pH (5.5–9.0), reproducibility of potential (0.6–1.2 mV) and selectivity coefficients in relation to some organic and inorganic anions. The electrodes were applied for the determination of ibuprofen in tablets by the calibration curve method and the standard addition method.      

Metathesis transformations of unsaturated derivatives of β-diketones

Selected β-diketones bearing unsaturated derivatives have been demonstrated to undergo homo-metathesis and cross-metathesis with selected olefins in the presence of Grubbs catalysts. The reactions led to respective homo- and cross-metathesis products mainly with good yields and selectivities.      

Determination of Alizarin Red S using a novel B-Z oscillation system catalyzed by a tetraazamacrocyclic complex

A new and convenient method for the determination of Alizarin Red S by the perturbations caused by different amounts of Alizarin Red S on a novel B-Z oscillating system is proposed. This new type Belousov-Zhabotinskii involves a macrocyclic copper(II) complex [CuL](ClO₄)₂ as catalyst and malic acid as the substrate. The ligand L in the complex is 5,7,7,12,14,14-hexamethyl-1,4,8,11-tetraazacyclotetradeca-4,11-diene. It is found that the relationship between the change in the oscillation amplitude and the logarithm of the Alizarin Red S concentration in the range of 1.5 × 10⁻⁷ to 1 × 10⁻³ M fits a polynomial model: ΔA = 659 + 184.2 log [Alizarin Red S]+ 12.9 log² [Alizarin Red S]. The RSD obtained with ten samples is 4.4%. The probable mechanism involving the perturbation of Alizarin Red S on the oscillating chemical system is also discussed.      

Preliminary results of a quick,simple method of detecting antimony in water samples

Preliminary results of development of a direct and fast method of determination of antimony in samples of tap water using GFAAS are presented. The found levels of antimony were lower than permitted for human consumption. A mixture of Pd and Mg(NO₃)₂ (concentrations in the injected solution: 8.6 μg mL⁻¹ and 5.8 μg mL⁻¹ respectively) was used as the chemical modifier. The pyrolysis and atomization temperatures were 1000 and 1700°C, respectively and the mean analytical recovery 98.2%.      

Miniaturization of flow-through generation cells for electrochemical hydride generation in AAS

The construction and optimization of five new types of miniaturized flow-through electrolytic cells with lead cathode and platinum anode for electrochemical hydride generation in atomic absorption spectrometry (HG-QFAAS) were achieved during this research study. The ion-exchange membrane was not part of these cells and only one carrying electrolyte for both electrode chambers was used. Hydride generation efficiency achieved was either comparable or higher than the one recorded for the classic thin-layer generation cell. The inner volume of the cathode chamber was reduced to a quarter of the classic thin-layer flow-through cell. Compared to the commonly used thin-layer flow-through cell, higher sensitivity (7.32×10³ dm³ μg⁻¹) and better limit of detection (0.32 μg dm⁻³) were obtained for selenium determination using two of these new generators.      

Surfactant to dye binding degree method for the determination of fluvoxamine maleate and citalopram hydrobromide in pharmaceuticals

The surfactant to dye binding degree (SBDB) methodology was used to determine fluvoxamine maleate and citalopram hydrobromide. Neutral red and sodium dodecyl sulfate (SDS) were used as the dye and surfactant, respectively, to form dye-surfactant aggregates. When a cationic drug is added to dye-surfactant mixture, it interacts with the surfactant and decreases the dye-surfactant binding degree. This decrease is proportional to the drug concentration. This was measured by monitoring the absorbance changes of the dye at 532 nm. Under the optimum conditions, the calibration graphs were linear over the range of 1.2–15 μg mL⁻¹ and 1.1–15 μg mL⁻¹ for fluvoxamine maleate and citalopram hydrobromide, respectively. The detection limits (signal to noise ratio = 3) were found to be 0.37 and 0.35 μg mL⁻¹, for fluvoxamine maleate and citalopram hydrobromide, respectively.      

Hollow fibre liquid phase microextraction of parabens

A hollow fibre liquid phase microextraction for gas chromatographic determination of some p-hydroxybenzoic acid esters has been developed. Chlorobenzene containing tetradecane as internal standard was used for the extraction. Optimized extraction was carried out at room temperature for 40 min in the presence of 0.4 g mL⁻¹ NaCl in the sample solution. Calibration was linear up to 30 mg L⁻¹. Correlation coefficients were 0.996–0.998. Enrichment factors were 21, 95 and 154, and detection limits were 0.20, 0.03 and 0.01 μg mL⁻¹ for methylparaben, ethylparaben and propylparaben, respectively. Reproducibility was acceptable with relative standard deviations up to 11.7%. The technique was tested for water and urine analysis.      

Dispersive liquid-liquid microextraction and liquid chromatographic determination of pentachlorophenol in water

A simple and sensitive dispersive liquid-liquid microextraction method for extraction and preconcentration of pentachlorophenol (PCP) in water samples is presented. After adjusting the sample pH to 3, extraction was performed in the presence of 1% W/V sodium chloride by injecting 1 mL acetone as disperser solvent containing 15 μL tetrachloroethylene as extraction solvent. The proposed DLLME method was followed by HPLC-DAD for determination of PCP. It has good linearity (0.994) with wide linear dynamic range (0.1–1000 μg L⁻¹) and low detection limit (0.03 μg L⁻¹), which makes it suitable for determination of PCP in water samples.