新型高分子基多孔炭材料的设计制备与功能化策略

多孔炭材料具有孔隙率丰富、导电率高、结构稳定以及物理化学性质可调等优点,广泛应用于能源储存与转换、吸附分离、催化、石油化工和生物医药等领域.原料结构是影响多孔炭材料结构和性能的关键因素.高分子理化结构丰富可调,且具有良好的成炭性和形貌继承性,是制备高性能多孔炭材料的理想原料.本专论结合近期国内外研究进展以及我们课题组相关工作,系统总结了高分子衍生多孔炭材料的直接炭化法和模板法设计制备理论,讨论了炭骨架功能化策略,归纳了高分子的化学结构及微观形貌对多孔炭材料的孔道与骨架结构的影响规律,并展望了这一领域未来的研究方向.     

锂硫电池用多孔碳/硫复合正极材料的研究

锂硫电池具有高的理论比容量和理论能量密度,被认为是当前最有前景的二次电池体系之一。现阶段锂硫电池的研究工作主要集中于高性能硫正极材料的设计与合成。具有优良的导电性、良好的结构稳定性和多孔结构的纳米碳材料,比如活性碳、介孔碳、超小微孔碳、多级结构多孔碳、空心碳球和空心碳纤维,充分满足了锂硫电池正极材料对碳基体的要求。本文综述了近年来多孔碳/硫复合材料作为硫正极的研究进展。总结了以具有不同结构特征的多孔碳基体负载硫组装的锂硫电池的电化学性能,并分析了不同多孔结构对性能的影响。最后在此基础上,从多孔碳/硫复合正极材料的设计和合成的角度,展望了其未来的发展趋势。     

由含铝金属有机骨架材料制备的多孔碳在锂硫电池中的应用

采用水热法制备了一种含铝金属有机骨架材料, 其在高温下发生炭化得到多孔碳, 最后与硫复合制得锂硫电池正极材料. XRD图谱显示在高温炭化时多孔碳样品出现了部分石墨化. N₂等温吸附-脱附测试分析显示合成的多孔碳材料含有微孔和介孔结构. 对不同载硫量的锂硫电池进行了充放电性能测试, 结果显示S质量分数为46.3%的样品在0.01 C倍率下首次放电容量达到1272 mA·h/g; 在0.1 C倍率下首次放电容量为934 mA·h/g, 循环性能良好.     

对聚苯树脂炭化产物作为锂离子电池碳电极材料的研究Ⅱ.炭化产物制备的电极材料组装的锂离子电池电化学性能

电化学性质;对聚苯树脂炭化产物作为锂离子电池碳电极材料的研究Ⅱ.炭化产物制备的电极材料组装的锂离子电池电化学性能     

对聚苯树脂炭化产物作为锂离子电池碳电极材料的研究Ⅱ.炭化产物制备的电极材料组装的锂离子电池电化学性能

电化学性质;对聚苯树脂炭化产物作为锂离子电池碳电极材料的研究Ⅱ.炭化产物制备的电极材料组装的锂离子电池电化学性能     

模板辅助合成氮掺杂的多孔碳基氧还原电催化剂的研究进展（英文）

氮掺杂的多孔碳材料有望能取代当前普遍应用于质子交换膜燃料电池和金属-空气电池阴极中的贵金属氧还原催化剂,因而备受关注.模板辅助合成技术作为一种可靠、通用的方法已经在多孔碳电催化剂的制备中得到了广泛的应用.在碳基ORR电催化剂中,其ORR活性受到诸多因素的影响,如掺杂剂的浓度及其在碳上的分子掺杂态、孔洞结构、比表面积以及碳基材料的导电性等.本文对近期氮掺杂多孔碳电催化剂的设计、制备、功能化及其在氧还原电催化中的应用研究进展进行了总结,同时展望了模板辅助合成法的一些发展趋势.     

模板辅助合成氮掺杂的多孔碳基氧还原电催化剂的研究进展

氮掺杂的多孔碳材料有望能取代当前普遍应用于质子交换膜燃料电池和金属-空气电池阴极中的贵金属氧还原催化剂,因而备受关注. 模板辅助合成技术作为一种可靠、通用的方法已经在多孔碳电催化剂的制备中得到了广泛的应用. 在碳基ORR电催化剂中,其ORR活性受到诸多因素的影响,如掺杂剂的浓度及其在碳上的分子掺杂态、孔洞结构、比表面积以及碳基材料的导电性等. 本文对近期氮掺杂多孔碳电催化剂的设计、制备、功能化及其在氧还原电催化中的应用研究进展进行了总结,同时展望了模板辅助合成法的一些发展趋势.     

多孔碳材料的制备

多孔碳材料不仅具有碳材料化学稳定高、导电性好等优点,由于多孔结构的引入,还具有比表面积高、孔道结构丰富、孔径可调等特点,在催化、吸附和电化学储能等方面都得到了广泛的应用。本文综述了微孔、介孔、大孔及多级孔碳等多孔碳材料的最新研究进展,重点介绍了多孔碳孔道结构的调控,并对多孔碳材料的应用进行了展望。     

锂硫电池正极材料的制备及工艺优化

锂硫电池具有能量密度高、价格低等优势,有希望应用于下一代储能领域. 但锂硫电池仍然存在一些问题,如多硫化物穿梭效应、缺乏有效的锂硫电池规模制备工艺等. 为了解决这些问题,作者以不同商用碳材料（乙炔黑、科琴黑与碳纳米管）和单质硫复合作为正极材料,探究正极制备工艺对多硫化物穿梭效应抑制效果及锂硫电池性能的影响. 通过研究,作者得出以下结论：科琴黑作为单质硫的载体,与单质硫球磨8 h后,匹配粘结剂聚乙烯吡咯烷酮（PVP）制备的正极浆料可实现在涂布和辊压后极片的厚度达到500 μm、压实密度达到991.65 mg·cm ^-3. 作者将最终得到的正极极片应用于高硫载量锂硫软包电池,电池首圈放电容量为137.4 mA·h,经过10圈循环后,放电容量为115.5 mA·h,表现出优异的电化学性能. 该碳硫复合正极材料制备工艺有望在锂硫电池的宏量制备中获得应用.     

MXene及其复合材料在钠/钾离子电池中的应用

MXene作为一种新型的二维层状结构材料而备受关注, MXene具有高电子传导率、较大的比面积、较好的机械性能以及独特的层状结构, 已广泛应用于储能、催化、吸附等领域。近年来, MXene及其复合材料应用于二次电池领域引起了人们的广泛关注。氧化物、硫化物等材料具有高容量, 但存在电导率低、反应过程中体积膨胀、循环稳定性差等问题, 构建与MXene的复合材料既能提高容量又可以增强材料的电子导电率, 有效缓解反应过程中体积膨胀, 实现最佳的电化学性能。本文主要对MXene及其复合材料在钠离子电池和钾离子电池中的最新研究进展进行总结, 简要介绍了钠离子电池、钾离子电池和MXene的研究背景, 重点介绍了MXene复合材料在钠离子电池中的应用研究, 主要按照硫化物、氧化物、碳材料进行分类, 对其合成方法与电化学性能进行综述, 同时总结了MXene复合材料在钾离子电池中的研究进展。最后本文对MXene及其复合材料的发展及其应用前景进行了总结与展望。     

Strategies towards Low‐Cost Dual‐Ion Batteries with High Performance

Rocking‐chair based lithium‐ion batteries (LIBs) have extensively applied to consumer electronics and electric vehicles (EVs) for solving the present worldwide issues of fossil fuel exhaustion and environmental pollution. However, due to the growing unprecedented demand of LIBs for commercialization in EVs and grid‐scale energy storage stations, and a shortage of lithium and cobalt, the increasing cost gives impetus to exploit low‐cost rechargeable battery systems. Dual‐ion batteries (DIBs), in which both cations and anions are involved in the electrochemical redox reaction, are one of the most promising candidates to meet the low‐cost requirements of commercial applications, because of their high working voltage, excellent safety, and environmental friendliness compared to conventional rocking‐chair based LIBs. However, DIB technologies are only at the stage of fundamental research and considerable effort is required to improve the energy density and cycle life further. We review the development history and current situation, and discuss the reaction kinetics involved in DIBs, including various anionic intercalation mechanism of cathodes, and the reactions at the anodes including intercalation and alloying to explore promising strategies towards low‐cost DIBs with high performance.     

From Solid‐Solution Electrodes and the Rocking‐Chair Concept to Today's Batteries

Lithium‐ion batteries (LIBs) have become ubiquitous power sources for small electronic devices, electric vehicles, and stationary energy storage systems. Despite the success of LIBs which is acknowledged by their increasing commodity market, the historical evolution of the chemistry behind the LIB technologies is laden with obstacles and yet to be unambiguously documented. This Viewpoint outlines chronologically the most essential findings related to today's LIBs, including commercial electrode and electrolyte materials, but furthermore also depicts how the today popular and widely emerging solid‐state batteries were instrumental at very early stages in the development of LIBs.     

2D Materials as Ionic Sieves for Inhibiting the Shuttle Effect in Batteries

Alternatives of commercial lithium‐ion batteries (LIBs) have drawn huge attention due to the large demand of energy storage systems and the lack of resources for traditional LIBs. Promising candidates include but are not limited to Li‐S batteries, organic batteries and flow batteries. However, the dissolution of active materials and the consequent shuttle effect, as one of the main challenges in these candidates, always leads to significant capacity loss and poor cycling life. The rising two‐dimensional (2D) materials, with well‐defined structures and attractive physical and chemical properties, provide a new vision to solve these problems via suppressing the shuttle of the dissolved active materials. Herein, we present a minireview on the advances and perspectives of 2D materials as ionic sieves for inhibiting the shuttle effect in batteries.     

Nitrogen Doped Carbon Coated Bi Microspheres as High-performance Anode for Half and Full Sodium Ion Batteries

As two-dimensional (2D) materials, bismuth (Bi) has large interlayer spacing along c-axis (0.395 nm) which provides rich active sites for sodium ions, thus guaranteeing high sodium ion storage activity. However, its poor electrical conductivity, combined with its degraded cycling performance, restricts its practical application. Herein, Bi microsphere coated with nitrogen-doped carbon (Bi@NC) was synthesized. Owing to the unique Bi crystals and nitrogen-doped carbon layer, the obtained Bi@NC anode exhibited satisfactory cycling stability and superior rate capability. Moreover, after assembling Bi@NC anode with Na₃V₂(PO₄)₃@C cathode to full battery, excellent sodium storage performance was obtained (57 mA h g⁻¹ after 2000 cycles at 1.0 A g⁻¹).     

基于有机物电极的电化学能量存储与转化

由于高安全的特性,水系二次电池被认为是未来大型储能的有效解决方案之一. 然而,现有水系电池主要以含金属元素的无机化合物为电极活性材料,其在大型储能中的实际应用仍受到循环寿命、环境问题、原料成本或金属元素丰度的限制. 相较于无机电极材料,部分有机电极材料具有原料丰富、结构丰富、可持续及环境友好等优点. 此外,有机物材料分子内空间大,能够存储不同价态电荷,因此近年来被广泛关注. 本文综述了课题组近期在有机物电极方面的研究进展,内容聚焦含羰基有机物通过C=O/C-O-的可逆转化存储单价金属阳离子(Li⁺, Na⁺)、双价金属阳离子(Zn²⁺)、质子(H⁺)所涉及的电化学过程,及其在水系锂、钠离子电池、水系锌离子电池、质子电池以及分步电解水中的应用.     

Metal-organic frameworks and their derivatives for Li-air batteries

Metal-organic frameworks(MOFs)are a class of outstanding materials in Li-air batteries because of their high surface areas,tailorable pore sizes and diverse catalytic centers.However,MOF-based batteries are facing challenges such as poor electronic conductivity and inferior long-cycle stability that limit their further development.This review first summarizes the progress of pristine MOFs and MOF-derived materials in Li-air batteries in the past 5 years,then provides a perspective for subsequent development of MOFs and their derivatives in this emerging field.     

VOCl as a Cathode for Rechargeable Chloride Ion Batteries

A novel room temperature rechargeable battery with VOCl cathode, lithium anode, and chloride ion transporting liquid electrolyte is described. The cell is based on the reversible transfer of chloride ions between the two electrodes. The VOCl cathode delivered an initial discharge capacity of 189 mAh g^?1. A reversible capacity of 113 mAh g^?1 was retained even after 100 cycles when cycled at a high current density of 522 mA g^?1. Such high cycling stability was achieved in chloride ion batteries for the first time, demonstrating the practicality of the system beyond a proof of concept model. The electrochemical reaction mechanism of the VOCl electrode in the chloride ion cell was investigated in detail by ex situ X‐ray diffraction (XRD), infrared spectroscopy (FTIR), transmission electron microscopy (TEM), and X‐ray photoelectron spectroscopy (XPS). The results confirm reversible deintercalation–intercalation of chloride ions in the VOCl electrode.     

From Lithium‐Ion to Sodium‐Ion Batteries: Advantages,Challenges, and Surprises

Mobile and stationary energy storage by rechargeable batteries is a topic of broad societal and economical relevance. Lithium‐ion battery (LIB) technology is at the forefront of the development, but a massively growing market will likely put severe pressure on resources and supply chains. Recently, sodium‐ion batteries (SIBs) have been reconsidered with the aim of providing a lower‐cost alternative that is less susceptible to resource and supply risks. On paper, the replacement of lithium by sodium in a battery seems straightforward at first, but unpredictable surprises are often found in practice. What happens when replacing lithium by sodium in electrode reactions? This review provides a state‐of‐the art overview on the redox behavior of materials when used as electrodes in lithium‐ion and sodium‐ion batteries, respectively. Advantages and challenges related to the use of sodium instead of lithium are discussed.     

Progress of Organic Electrodes in Aqueous Electrolyte for Energy Storage and Conversion

Aqueous batteries using inorganic compounds as electrode materials are considered a promising solution for grid-scale energy storage, while wide application is limited by the short life and/or high cost of electrodes. Organics with carbonyl groups are being investigated as the alternative to inorganic electrode materials because they offer the advantages of tunable structures, renewability, and they are environmentally benign. Furthermore, the wide internal space of such organic materials enables flexible storage of various charged ions (for example, H⁺, Li⁺, Na⁺, K⁺, Zn²⁺, Mg²⁺, and Ca²⁺, and so on). We offer a comprehensive overview of the progress of organics containing carbonyls for energy storage and conversion in aqueous electrolytes, including applications in aqueous batteries as solid-state electrodes, in flow batteries as soluble redox species, and in water electrolysis as redox buffer electrodes. The advantages of organic electrodes are summarized, with a discussion of the challenges remaining for their practical application.     

Recent progress in the application of in situ atomic force microscopy for rechargeable batteries

High energy density batteries are urgently required for sustainable life. The intrinsic understanding of the reaction mechanism at the interfaces is essential for the progress. In this short overview, recent advances in rechargeable batteries by in situ atomic force microscopy are summarized, providing nanoscale information on the solid product evolution and metal plating/stripping inside working batteries. Besides, the multifunctional imaging of the morphology along with mechanical and electrical properties can be achieved to assist further interfacial design. Extensive applications of in situ atomic force microscopy are encouraged to explore the electrochemical mechanism and advanced engineering.