AT&T准则下完全检验的最优设计(英文)

本文研究了完全检验的质量控制问题,将广泛用于X-控制图的AT＆amp;T准则应用于完全检验,并根据完全检验的特点,提出一种新的最优模型,数值实验结果表明AT＆amp;T准则下的完全检验优于传统的完全检验。     

控制图判断准则的显著性检验

徐哲，段晓江．控制图判断准则的显著性检验．数理统计与管理，１９９８，１７（３），４５～４８．利用控制图判断生产过程的状态是一种统计判断，必然犯两种错误。本文在规定“小概率事件”标准的基础上，对休哈特控制图判断准则假设检验的显著性水平进行了分析，并直观解释了各种异常情况的系统性变化特点，最后简述了计算机辅助质量控制图的应用     

质量控制中完全检验的一种最优设计

本文提出质量控制中完全检验的一种最优设计。所谓完全检验 ,也就是 1 0 0 %检验 ,是指生产出来的每一个产品都要经过检验。生产过程中有两种生产状态 :控制状态和失控状态。当一个产品的质量特征值超过预定的控制界限 ,就立即对生产过程进行检查 ,一旦发现生产失控 ,马上采取调整措施使生产恢复正常。检验后的产品按其质量特征值接受或者重新制作。根据本文所建立的质量成本模型 ,我们可以得到最优的产品质量的规格界限和控制界限 ,对实际企业的生产有积极的指导作用。     

两种不同系统因素影响下完全检验的最优设计

本文研究了两种不同系统因素影响下完全检验的质量最优问题 ,采用有两种不同控制界限的控制图来控制生产过程 ,并根据完全检验的特点 ,提出了一种新的最优模型。 Hui(1 991 )提出的最优模型是本文的最优模型的特殊情况 ,并且本文建立的最优模型还可推广到两种以上不同的系统因素下影响的情况     

统计控制图的异常判断准则分析

本篇文章在介绍统计控制图原理基础上,列举了常规控制图现有的异常判断准则,并指出现有准则存在的缺点。提出了对三个问题的异常判断准则分析。并推导出这三个问题异常判断准则的一般性结论。     

基于多点报警的多元统计过程控制

本文主要研究了一种将控制图的报警准则由一点改为多点时多元控制图的构造,对于不同的多点报警准则的控制图可以通过计算平均运行长度的方法得出了不同的控制限参数。然后本文对各种报警准则下的多元控制图与Hotelling T2控制图,MCUSUM(多元累计和控制图)和MEWMA(多元指数加权移动平均控制图)进行了比较,说明这种改变报警规则的多元控制图在监测过程中出现的微小波动时具有一定的优势。     

绝对风险规避者的证券投资理论和方法

本在分析证券投资效用函数的基础上,推导出选择证券投资品种的随机控制准则,特别对三阶随机控制准则的理论和应用做详细分析,并用此准则对上海证券交易所的普通股票作实证分析,这为证券投资选择证券投资品种形成有效证券集合提供科学依据。     

轴对称非协调元收敛理论与方法

基于加权Sobolev空间理论,建立了轴对称非协调元收敛准则。首先给出了轴对称非协调元的广义分片检验和F-E-M条件。又给出了一个既可用于检验单元收敛又可用于指导设计单元的轴对称非协调元收敛准则——强分片检验(SPT)。按此收敛准则建立了构造轴对称非协调元的一般方法。     

图的部分控制集问题的修正 Greedy算法

部分控制集问题是对于给定的顶点赋权图G=(V,E;c)和正整数K,寻找图G一个顶点子集T,使得在其控制下的顶点个数不小于K且T中顶点权和达到最小。本文讨论了部分控制集问题的NP-困难性;给出了该问题的一种修正Greedy近似算法,并对其近似度H(K)给出了证明。     

创始人控制、控制链长度与真实盈余管理

从控制链长度的视角出发,去探寻金字塔结构对于家族企业真实盈余管理的影响,有助于进一步丰富对于金字塔结构的认识,具有重要的研究价值。本文利用2012~2016年我国A股市场金字塔持股结构的家族上市公司数据,对控制链长度变化与家族真实盈余管理的关系进行实证检验。研究结论表明:家族企业的控制链长度与真实盈余管理程度显著正相关;而依据最终控制人是否为公司创立者的分组检验结果显示,控制链长度与真实盈余管理的正相关关系,仅在非创始人控制的家族企业样本中成立。在采用倾向得分匹配(PSM)方法,进一步分析发现:与非创始人控制家族企业相比,创始人控制的家族企业的盈余管理程度明显更低。     

Joint determination of production quantity,inspection schedule,and quality control for an imperfect process with deteriorating products

In this paper, we study the simultaneous effects of both deteriorating product items and deteriorating production processes on economic production quantity, inspection schedules, and the economic design of control charts. Deterioration times for both product and process are assumed to follow arbitrary probability distributions. The product quality characteristic, however, is assumed to be normally distributed. Applications of the proposed model are demonstrated through illustrative examples.     

Optimal np control chart with curtailment

This article presents an algorithm for the optimization design of the np control chart with curtailment. The objective is to maximize the effectiveness of the np chart, while holding the false alarm rate at a specified level and maintaining its simplicity for understanding and operation to a large degree. The optimization algorithm can be applied to a 100% inspection as well as a general random sampling inspection. The effectiveness of the chart is measured by the out-of-control average time to signal (ATS) under the steady-state mode. This mode allows a shift in fraction nonconforming, p, to occur at any time during the inspection of a sample and, therefore, provides more realistic results than the zero-state mode. According to several performance studies and an illustrative example that are conducted in this research, the optimal np chart with curtailment may reduce the out-of-control ATS by nearly half, on average, compared to the conventional np charts.     

On‐line evaluation of the stability of an inspection process

This article proposes control charts to monitor an inspection process based on the defective proportion of the inspected parts. The focus is on inspection process where the incoming parts form a sequence of independent units, such as unrelated clients arriving at a service facility. An example of this kind of inspection process is the periodic motor vehicle (PMVI) inspection. The effectiveness of the proposed control is evaluated using Monte Carlo experiments and is applied to an actual PMVI station. Copyright © 2009 John Wiley & Sons, Ltd.     

基于正态分布的逐批抽样检验贝叶斯控制图控制限研究

在生产条件受控的状态下,先验分布与后验分布应服从同一分布,在假设该分布为正态分布的前提下,根据贝叶斯理论推导出均值、极差和标准差的迭代计算公式,并依此计算控制图的控制限,使有效的先验批检验信息得到充分运用,弥补传统控制图在小批量生产环境下样本信息不足的缺点。研究发现,基于贝叶斯原理的统计控制图控制限随着检验批次的逐渐增加,更接近控制界限的实际值,比传统控制图的控制效果更加可靠、有效。     

Economic design of variable parameters <Emphasis Type="Italic">X̄</Emphasis> control charts for processes with fuzzy mean shifts

Modern studies have shown that the X? control charts with variable parameters (VPs) detect process shifts faster than the traditional X? control charts. This article developed the economic design of the VP X? control chart to determine the values of the design parameters of the chart. However, this study, different from previous studies, was focused on the process that is subject to a disturbing cause, and the occurrence of the cause can result in a fuzzy mean shift (ie the magnitude of the mean shift could not be recognized exactly). The issue of economically selecting the design parameters for the chart was firstly formulated as a mathematical programming model with a fuzzy objective function that could cope with fuzzy number type of mean shift. A fuzzy-simulation-based genetic algorithm was then employed to search for the optimal values of the design parameters from the model. An industrial example was provided to illustrate the solution procedure, and was used for comparison between the VP and the traditional X? chart. Effects of model parameters on the solution of the economic design were also discussed.     

固定时间域可变采样间隔的统计控制图

本文从提高统计控制图对过程波动检测能力和方便管理的角度出发 ,对可变采样间隔(VSI)控制图进行改进 ,提出了针对连续过程质量控制应用需要的固定时间域可变采样间隔(VSIFT)控制图。文章详细介绍了VSIFT均值极差控制图、VSIFTEWMA控制图的设计 ,并分别评价了它们对过程异常状态的检测能力     

Economic design of inspection procedures using guard band when measurement errors are present

One of the most important aspects in designing production systems is implementing an adequate inspection procedure to ensure the product quality. Our literature study indicates that two important questions still remain unanswered. First, most of the previous studies on inspection procedures are mainly concerned with how to evaluate and analyze the adequacy of inspection procedures during a production stage. Although the issue of the adequacy of inspection procedures at this point is clearly important, many production processes may better benefit from designing enhanced inspection procedures during an early design stage. Second, the majority of previous studies do not incorporate possible economic impacts of measurement errors when inspection procedures need to be designed. More extensive efforts in designing inspection procedures need to be investigated based on economic considerations. Two approaches, the use of guard band and the selection of inspection precision level, are simultaneously examined for designing economic inspection procedures. By incorporating these two approaches, this paper proposes an optimization scheme for economic design of inspection procedures. A numerical example along with sensitivity analysis demonstrates the applicability of the proposed model.     

可变抽样区间的非正态EWMA图的经济设计

本文主要讨论非正态总体下,可变抽样区间的EWMA图的经济设计问题。首先利用Burr分布近似各种非正态分布,建立可变抽样区间的非正态EWMA图的经济模型,使总期望费用最型小来确定参数的最优值;其次用遗传算法来寻找该经济模型的最优解,并给出工业中的一个例子;最后对可变抽样区间的非正态EWMA图的经济模型进行灵敏度分析。