Theoretical Study of the C-Cl Bond Dissociation Enthalpy and Electronic Structure of Substituted Chlorobenzene Compounds

利用密度泛函(DFT)三种交换/相关函数(B3LYP, B3PW91,B3P86)结合6-31G**和6-311G**基组,计算了13个取代氯苯化合物的键离解能. 结果表明B3P86/6-311G**方法是计算取代氯苯化合物键离解能的可信方法,研究发现C-Cl键的键离解能与所使用的基组和计算方法密切相关,取代基对C-Cl键的键离解能的影响不明显. 研究了目标化合物的前线轨道能级差,并对取代氯苯化合物的热稳定性做了评估.     

聚对苯二甲酸丁二醇酯/聚(对苯二甲酸丁二醇酯-e-己内酯)二元结晶共混体系的相容性和结晶行为

聚对苯二甲酸丁二醇酯(PBT)/聚(对苯二甲酸丁二醇酯-e-己内酯)(PBT-PCl)是一个新制备的具有分子间排斥相互作用的A/AxB1?x型两元结晶共混体系. 根据两元平均场模型,报道对苯二甲酸丁二醇酯(BT)与"-己内酯(CL)结构单元的相互作用参数为0.305. DSC研究发现,此共混物呈现了与典型的共聚物/均聚物共混物不同的结晶特征. PBT-PCL影响PBT链的活动力和晶片堆积;同时PBT-PCL的结晶受到先期结晶的PBT晶粒的阻滞. 尽管拥有相同的BT单元,共混的两组分在组成变化范围内仍没有形     

HOX(X=F,Cl)二聚体红移氢键的理论研究

用理论方法研究了二聚体HOX(X=F,Cl)分子间氢键,在B3LYP/6-31+G(d,p)、 B3LYP/6-311++G(d,p)、MP2/6-31+G(d,p)和MP2/6-311++G(d,p)水平上,利用标准方法和均衡校正方法对二聚体进行了几何优化、振动频率和相互作用能的计算。同时,利用电子密度拓扑分析和自然键轨道分析对红移氢键的本质进行了分析。研究表明：分子间O—H…O和O—H…X(X=F,Cl)氢键的形成使二聚体中O—H键伸长,伸缩振动频率减小,形成红移氢键。NBO分析表明,电荷转移效应占优势,因此形成O—H…O和O—H…X(F,Cl)红移氢键。     

硝酸羟胺-(H_2O)_n复合物氢键相互作用的密度泛函研究

为研究硝酸羟胺-(H_2O)_n复合物的氢键作用,采用密度泛函B3LYP方法在6-311++G(d, p)基组水平上对硝酸羟胺-(H_2O)_n复合物的结构进行优化,采用MP2/6-311++G(d, p)方法,经基组叠加误差和零点能校正计算得到复合物的相互作用能.利用自然键轨道分析方法研究复合物氢键作用的本质,并对复合物中水分子的振动光谱进行分析.计算结果表明,硝酸羟胺-(H_2O)_n复合物存在着6个硝酸羟胺-H_2O稳定构型和8个硝酸羟胺-(H_2O)_2稳定构型,且最稳定构型的相互作用能分别为52.821 kJ·mol~(-1)和73.349 kJ·mol~(-1).在硝酸羟胺-(H_2O)_n复合物中,水中H-O伸缩振动频率明显红移,且红移增大的程度与复合物稳定化能的变化趋势基本一致.     

HArF和HNO二聚体相互作用氢键的理论研究

用二阶微扰理论结合6-311+G**、6-311++G**和6-311++G(2d,2p)基组对氢键相互作用二聚体HNO···HArF进行研究．在MP2/6-311+G**、MP2/6-311++G**和MP2/6-311++G(2d,2p)水平上，利用标准方法和均衡校正方法对二聚体进行了几何优化、振动频率和相互作用能的计算．对于相互作用能采用G2MP2方法计算．计算结果表明存在两种稳定的二聚体HNO···HArF结构，在这两种结构中，Dimer I(H···F)比Dimer II(H···O)更加稳定．通过振动频率的计算表明，在Dimer I(H···F)中存在N-H···F蓝移氢键，在DimerII(H···O)中存在Ar-H···O红移氢键，并对蓝移氢键加以确认．利用电子密度拓扑学分析和自然键轨道分析对于氢键红移和蓝移进行了合理解释．     

对苯二甲酸乙二醇酯降解机理密度泛函的理论研究

采用密度泛函理论方法B3P86/6-31++G(d, p),对对苯二甲酸乙二醇酯一聚体降解反应机理进行了理论研究.设计了对苯二甲酸乙二醇酯一聚体纯热解、水解和醇解、水或醇作为催化剂降解过程的各种可能反应路径,对参与反应的各种中间体、过渡态及产物进行了几何结构优化和频率计算以获得热力学与动力学参数值.计算结果表明：当水或甲醇作为对苯二甲酸乙二醇酯热降解过程中的催化剂时,利用水或甲醇O-H中H提供到对苯二甲酸乙二醇酯一聚体主链酯键中O原子上形成对苯二甲酸,而乙烷基脱掉的H原子与水中羟基(-OH)或醇中甲氧基(-OCH₃)结合形成新的水或者甲醇,从而降低对苯二甲酸乙二醇酯热解过程中的反应能垒(251.4 kJ/mol→181.1 kJ/mol(甲醇)和187.5 kJ/mol(水));当水或甲醇作为对苯二甲酸乙二醇酯热降解过程中的反应物参与反应时,利用水或甲醇O-H中H提供到对苯二甲酸乙二醇酯一聚体主链乙烷基旁O原子上形成乙二醇,而水中羟基(-OH)或醇中甲氧基(-OCH₃)结合对苯二甲酸乙二醇酯一聚体主链羰基中C原子上形成对苯二甲酸或对苯二甲酸单...     

密度泛函方法对SiO分子基态(X 1 Σ+)势能函数的研究

利用密度泛函B3P86方法,分别选用STO-3G,D95**,6-311G,6-311 + + G,6-311 + + G**,cc-PVTZ基组对SiO分子基态(X 1 Σ+)进行结构优化计算.通过比较得出,cc-PVTZ基组为对SiO分子基态(X 1 Σ+)进行结构优化最优基组的结论.使用密度泛函B3P86方法,选用cc-PVTZ基组进行单点能扫描,用正规方程组拟合SiO分子基态(X 1 Σ+)的Murrell-Sorbie函数,得到解析势能曲线.最后,由得到的解析势能函数计算了相对应的光谱常数(Be,αe,ωe和ωeχe),并与实验值进行了比较.     

CH3⊕ … Br-Y(Y=H, CCH, CN, NC)缺电子体系中Br原子参与的反向卤键相互作用

采用B3LYP/6-311++G(d,p)和MP2/6-311++G(d,p)理论方法研究了CH₃^⊕…Br-Y(Y=H, CCH, CN, NC) 缺电子体系中Br参与的反向卤键(IXB)结构. 四个IXB复合物中,MP2/6-311++G(d,p)水平上考虑了基组叠加误差的分子间相互作用能分别为218.87, 219.48, 159.18和143.05 kJ/mol,相对稳定性的递增顺序CH₃^⊕…BrCN相似文献   

MgH分子X2Σ+,A2Π和B2Σ+电子态的势能函数

利用QCISD(T),SAC-CI方法和cc-pVQZ,aug-cc-pVTZ,6-311 G及6-311 G(3df,2pd)基组,对MgH分子的基态X2Σ ,第一简并激发态A2Π和第二激发态B2Σ 的结构进行优化计算.通过对4个基组计算结果进行比较,得出6-311 G(3df,2pd)基组为最优基组.使用6-311 G(3df,2pd)基组和QCISD(T)方法对基态X2Σ ,SAC-CI方法对激发态A2Π和B2Σ 进行单点能扫描计算,然后采用Murrell-Sorbie函数及修正的Murrell-Sorbie C6函数进行拟合,得到了相应电子态的势能函数参数和对应的光谱常数.计算结果表明,用修正的Murrell-Sorbie C6函数计算得到的MgH分子基态和第一简并激发态的光谱常数ωe,ωexe,Be,αe与实验数据吻合很好.表明修正后的Murrell-Sorbie C6函数能更为准确地描述MgH分子的基态和第一激发态的势能函数.     

Rh的芳基化合物与含氮芳基卤代物交叉偶联反应机理研究

利用密度泛函理论(DFT)研究了Rh的芳基化合物与含氮芳基卤代物交叉偶联过程催化循环的微观反应机理.在B3LYP/6-31+G(d)基组水平上(Rh、I采用了赝势基组Lan L2DZ)优化了反应过程中所有化合物的几何构型并计算了频率,通过能量、频率和振动方式确定了中间体和过渡态的真实性.此外,在同等基组水平上还运用了分子中的原子理论讨论了成键临界点的电荷密度的变化,运用了自然键轨道理论讨论了键的性质与轨道间的相互作用.为了提高计算精度,在6-311++G(d,p)基组水平上计算了反应机理中所有物质在气相及溶剂化下的单点能,得到与6-31+G(d)基组计算相同的结论 .结论表明Rh(Ⅰ)起到了有效的催化作用,且计算所得结论与实验结果相符合.     

吡喃木糖热裂解机理的密度泛函理论研究

采用密度泛函理论理论方法 M062X/6-311++G(d,p),对吡喃木糖的热解反应机理进行了理论计算分析.针对吡喃木糖热解可能发生的化学反应共设计了九条可能的热解路径,并对各路径中的反应物、中间体和过渡态的几何结构进行了能量梯度全优化,并在梯度全优化的基础上计算了各热解反应路径的热力学和动力学参数.文中以两大类方式来设计反应路径:1)木糖首先经过过渡态TS1发生开环反应生成链状中间体2,该步的反应能垒为188.7 kJ/mol,对于中间体2共设计了五种可能的热解反应路径;2)考虑双键同时断裂的情况,木糖先发生脱水反应,接着按C-C和C-O键同时断裂的情况发生开环反应,针于这种情况共设计了四条可能的热解路径.计算结果表明,吡喃木糖热解的主要反应产物有乙醇、乙醛、糠醛、丙酮、酸类、CO_2和CO等小分子化合物.     

吡喃木糖热裂解机理的密度泛函理论研究

采用密度泛函理论理论方法M062X/6-311++G(d,p)，对吡喃木糖的热解反应机理进行了理论计算分析。针对吡喃木糖热解可能发生的化学反应共设计了九条可能的热解路径，并对各路径中的反应物、中间体和过渡态的几何结构进行了能量梯度全优化，并在梯度全优化的基础上计算了各热解反应路径的热力学和动力学参数。文中以两大类方式来设计反应路径：1）木糖首先经过过渡态TS1发生开环反应生成链状中间体2，该步的反应能垒为188.7 kJ/mol，对于中间体2共设计了五种可能的热解反应路径；2）考虑双键同时断裂的情况，木糖先发生脱水反应，接着按C-C和C-O键同时断裂的情况发生开环反应，针于这种情况共设计了四条可能的热解路径。计算结果表明，吡喃木糖热解的主要反应产物有乙醇、乙醛、糠醛、丙酮、酸类、CO2和CO等小分子化合物。     

Accurate Analytic Potential Energy Function and Spectroscopic Study for G1 ∏g State of Dimer 7Li2

The reasonable dissociation limit for the G1∏g state of dimer 7Li2 is determined. The equilibrium internuclear distance, dissociation energy, harmonic frequency, vibrational zero energy, and adiabatic excitation energy are calculated using a symmetry-adapted-cluster configuration-interaction method in complete active space in Gaussian03 program package at such numerous basis sets as 6-311 G, 6-311 G(2df, 2pd), 6-311 G(2df, p), cc-PVTZ, 6-311 G(3df, 3pd), CEP-121G, 6-311 G(2df, pd), 6-311 G(d,p),6-311G(3df,3pd), D95(3df,3pd), 6-311 G(3df, 2p),6-311 G(2df), 6-311 G(df, pd) D95V , and DGDZVP. The complete potential energy curves are obtained at these sets over a wide internuclear distance range and have least squares fitted to Murrell-Sorbie function. The conclusion shows that the basis set 6-311 G(2df, p) is a most suitable one for the G1∏g state. At this basis set, the calculated spectroscopic constants Te, De, Eo, Re, ωe, ωeXe, αe, and Be are of 3.9523 eV, 0.813 06 eV, 113.56 cm-1, 0.320 15 nm,227.96 cm-1, 1.6928 cm-1, 0.004 436 cm-1, and 0.4689 cm-1, respectively, which are in good agreement with measurements whenever available. The total 50 vibrational levels and corresponding inertial rotation constants are for the first time calculated and compared with available RKR data. And good agreement with measurements is obtained.     

Accurate Analytic Potential Energy Function and Spectroscopic Study for G^1Ⅱg State of Dimer ^7Li2

The reasonable dissociation limit for the G^1Ⅱg, state of dimer ^7Li2 is determined. The equilibrium internuclear distance, dissociation energy, harmonic frequency, vibrational zero energy, and adiabatic excitation energy are calculated using a symmetry-adapted-cluster configuration-interactlon method in complete active space in Gaussian03 program package at such numerous basis sets as 6-311 ＋＋G, 6-311 ＋＋G（2df,2pd）, 6-311 ＋＋G（2df, p）, cc-PVTZ, 6- 311＋＋G（3df,3pd）, CEP-121G, 6-311＋＋G（2df, pd）, 6-311＋＋G（d,p）,6-311G（3df,3pd）, D95（3df,3pd）, 6-311＋＋G（3df,2p）, 6-311＋＋G（2df）, 6-311＋＋G（df, pd） D95V＋＋, and DGDZVP. The complete potential energy curves are obtained at these sets over a wide internuclear distance range and have least squares fitted to Murrell-Sorbie function. The conclnsion shows that the basis set 6-311＋＋G（2df, p） is a most suitable one for the G^1Ⅱg state. At this basis set, the calculated spectroscopic constants Te, De, Eo, Re, ωe, ωeXe, ae, and Be are of 3.9523 eV, 0.813 06 eV, 113.56 cm^-1, 0.320 15 nm, 227.96 cm^-1, 1.6928 cm^-1, 0.004 436 cm^-1, and 0.4689 cm^-1, respectively, which are in good agreement with measurements whenever available. The total 50 vibrational levels and corresponding inertial rotation constants are for the first time calculated and compared with available RKR data. And good agreement with measurements is obtained.     

甲基乙烯醚和OH反应机理的理论研究

利用量子化学从头计算的方法对甲基乙烯醚的两个异构体之间的转化,羟基与顺式-甲基乙烯醚和反式-甲基乙烯醚的加成反应,以及羟基提取甲基上的氢原子的反应机理进行了研究.研究结果表明:顺式-甲基乙烯醚比反式-甲基乙烯醚更加稳定,在QCISD/6-31G(d,P)//BHandHLYP/6.311 G(d,P)理论水平下,OH加到顺式-甲基乙烯醚1号住的碳原子上需要跨越的能垒比其它反应通道需要跨越的能垒少7.5～34 KJ/mol,因此是主要的反应通道,而OH加在反式.甲基乙烯醚2号位的碳原子上所需要跨越的能垒比其它反应路径所需要跨越的能垒少8.3～26.7 kJ/mol,因此是主要的反应路径.利用经典过渡态理论计算了总的速率常数     

Theoretical calculations of homogeneous catalysis in the gas phase: elimination kinetics of 2,2-dimethoxypropane in the presence of HCl,F3CCOOH and CH3COOH

The mechanisms of gas-phase elimination kinetics of 2,2-dimethoxypropane in the presence of hydrogen chloride, trifluoroacetic acid and acetic acid were studied using Moller Plesset, ab initio combined method Complete Basis Set (CBS)-QB3 and various density functional theory methods with 6-311G(d,p) and 6-311++G(d,p) basis sets. The M06-2X/6-311++G(d,p) method provided reasonable agreement with the experimental enthalpy and energy of activation. Formation of 2-methoxypropene and methanol products occurs through six-membered cyclic ring transition state (TS) structure. The TS was characterised by single imaginary frequency, and confirmed through intrinsic reaction coordinate (IRC) calculations. The IRC calculations suggest the development of a van der Waal complex between the 2, 2-dimethoxy propane and the acid catalyst, leading to the TS formation. The process of decomposition in the absence of the acid catalyst requires much higher temperature with an energy of activation above 200 kJ/mol. This fact appears to be a consequence of a four-membered cyclic TS-type of mechanism in the non-catalysed reaction. Structural parameters, analyses of natural bond orbital charges and bond orders of the acid-catalysed elimination reactions in this study suggest that the polarisation of the C–O bond, in the direction C^δ+—O^δ?, is rate-determining in the TS. These reactions are non-synchronous concerted polar in nature.     

Relationship of the Frequency of the Symmetric Stretching Vibration of the Bond of Group II–IV Metal Ions with Water Molecules and Thermodynamic Functions of Aqua Ion Formation

Journal of Applied Spectroscopy - Density functional theory in the M062x/6-311+G(d,p) approximation was used to calculate the optimal geometry and Raman spectra of group II–IV metal aqua ions...     

环状2-重氮基-4,6-二硝基苯酚振动光谱、爆轰特性和热解机理的理论研究

利用B3LYP方法/6-311+G**方法对环状2-重氮基-4,6-二硝基苯酚进行几何优化,频率分析无虚频. 计算结果表明该化合物存在分子内氢键,并存在4个主要的特征光谱区. 设计等键反应计算其生成焓,并对目标化合物的热稳定性和热解机理进行分析;运用Kamlet-Jacobs方程预测其爆速和爆压;结果表明环状2-重氮基-4,6-二硝基苯酚有较高的密度、爆速、爆压和较好的热稳定性.     

Structural and thermochemical properties of methyl ethyl sulfide alcohols: HOCH2SCH2CH3, CH3SCH(OH)CH3, CH3SCH2CH2OH,and radicals corresponding to loss of H atom

Sulfide alkoxy radicals are important intermediates during the partial oxidation of alkyl sulfides in atmospheric chemistry and in combustion. The atmospheric reaction sequence to formation of the alkoxy radicals includes (1) initial reaction with OH to create a radical on a carbon site, (2) the carbon radical then associates with ³O₂ to form a peroxy radical, and (3) an NO radical reacts with the peroxy radical to form an alkoxy radical (RO?) plus NO₂. This study determines structural parameters, internal rotor potentials, bond dissociation energies, and thermochemical properties (Δ_fH°, S°, and C_p(T)) of 3 corresponding alcohols HOCH₂SCH₂CH₃, CH₃SCH(OH)CH₃, and CH₃SCH₂CH₂OH of methyl ethyl sulfides studied in order to characterize the thermochemistry of the respective alkoxy radicals. The lowest energy molecular structures were calculated using the B3LYP density functional level of theory with the 6‐311G(2d,d,p) basis set. Standard enthalpies of formation (Δ_fH°₂₉₈) for the radicals and their parent molecules were calculated using B3LYP/6‐31 + G(2d,p), CBS‐QB3, M062x/6‐311 + g(2d,p), and G3MP2B3 methods. Isodesmic reactions were used to determine ?_fH° values. Internal rotation potential energy diagrams and rotation barriers were investigated using the B3LYP/6‐31 + G(d,p) level theory. The contributions for S°₂₉₈ and C_p(T) were calculated using the rigid rotor harmonic oscillator approximation based on the structures and vibrational frequencies obtained by CBS‐QB3 calculations, with contributions from torsion frequencies replaced by internal rotor contributions. Group additivity and hydrogen bond increment values were developed for estimating properties of structurally similar and larger sulfur‐containing peroxide molecules and their radicals.