Thermomechanical postbuckling of composite laminated cylindrical shells with local geometric imperfections

The effect of local geometric imperfections on the buckling and postbuckling of composite laminated cylindrical shells subjected to combined axial compression and uniform temperature loading was investigated. The two cases of compressive postbuckling of initially heated shells and of thermal postbuckling of initially compressed shells are considered. The formulations are based on a boundary layer theory of shell buckling, which includes the effects of the nonlinear prebuckling deformation, the nonlinear large deflection in the postbuckling range and the initial geometric imperfection of the shell. The analysis uses a singular perturbation technique to determine buckling loads and postbuckling equilibrium paths. Numerical examples are presented that relate to the performances of cross-ply laminated cylindrical shells with or without initial local imperfections, from which results for isotropic cylindrical shells follow as a limiting case. Typical results are presented in dimensionless graphical form for different parameters and loading conditions.     

Nonlinear buckling and postbuckling of heated functionally graded cylindrical shells under combined axial compression and radial pressure

The nonlinear large deflection theory of cylindrical shells is extended to discuss nonlinear buckling and postbuckling behaviors of functionally graded (FG) cylindrical shells which are synchronously subjected to axial compression and lateral loads. In this analysis, the non-linear strain-displacement relations of large deformation and the Ritz energy method are used. The material properties of the shells vary smoothly through the shell thickness according to a power law distribution of the volume fraction of the constituent materials. Meanwhile, by taking the temperature-dependent material properties into account, various effects of external thermal environment are also investigated. The non-linear critical condition is found by defining the possible lowest point of external force. Numerical results show various effects of the inhomogeneous parameter, dimensional parameters and external thermal environments on non-linear buckling behaviors of combine-loaded FG cylindrical shells. In addition, the postbuckling equilibrium paths are also plotted for axially loaded pre-pressured FG cylindrical shells and there is an interesting mode jump exhibited.     

Postbuckling analysis of axially-loaded laminated cylindrical shells with piezoelectric actuators

A compressive postbuckling analysis is presented for a laminated cylindrical shell with piezoelectric actuators subjected to the combined action of mechanical, electric and thermal loads. The temperature field considered is assumed to be a uniform distribution over the shell surface and through the shell thickness, and the electric field is assumed to be the transverse component E_Z only. The material properties are assumed to be independent of the temperature and the electric field. The governing equations are based on the classical shell theory with von Kármán–Donnell-type kinematic nonlinearity. The nonlinear prebuckling deformations and initial geometric imperfections of the shell are both taken into account. A boundary layer theory of shell buckling, which includes the effects of nonlinear prebuckling deformations, large deflections in the postbuckling range, and initial geometric imperfections of the shell, is extended to the case of hybrid laminated cylindrical shells. A singular perturbation technique is employed to determine the buckling loads and postbuckling equilibrium paths. The numerical illustrations concern the compressive postbuckling behavior of perfect and imperfect, cross-ply laminated cylindrical thin shells with fully covered or embedded piezoelectric actuators under different sets of thermal and electric loading conditions. The effects played by temperature rise, applied voltage, shell geometric parameter, stacking sequence, as well as initial geometric imperfections are studied.     

正交异性扁壳的等价关系式和不变量

提出各向同性扁壳比拟法,分析满足条件D_3=D_(12)=(D_1D_2)~(1/2)的正交异性扁壳大挠度弯曲和超屈曲问题,导出了正交异性扁壳与各向同性扁壳之间,两种不同正交异性扁壳之间坐标变量、扁壳厚度和曲率半径、荷载、挠度、转角、弯矩、扭矩、中面应力的等价关系式,还证明了等价正交异性扁壳的几个等价不变量。     

Postbuckling of FGM cylindrical shells under combined axial and radial mechanical loads in thermal environments

A postbuckling analysis is presented for a shear deformable functionally graded cylindrical shell of finite length subjected to combined axial and radial loads in thermal environments. Heat conduction and temperature-dependent material properties are both taken into account. The temperature field considered is assumed to be a uniform distribution over the shell surface and varied in the thickness direction only. Material properties are assumed to be temperature-dependent, and graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of the constituents. The formulations are based on a higher order shear deformation shell theory with von Kármán–Donnell-type of kinematic nonlinearity. A boundary layer theory of shell buckling, which includes the effects of nonlinear prebuckling deformations, large deflections in the postbuckling range, and initial geometric imperfections of the shell, is extended to the case of functionally graded cylindrical shells. A singular perturbation technique is employed to determine the interactive buckling loads and postbuckling equilibrium paths. The numerical illustrations concern the postbuckling response of perfect and imperfect cylindrical shells with two constituent materials subjected to combined axial and radial mechanical loads and under different sets of thermal environments. The results reveal that the temperature field and volume fraction distribution have a significant effect on the postbuckling behavior, but they have a small effect on the imperfection sensitivity of the functionally graded shell.     

Nonlinear stability of functionally graded material (FGM) sandwich cylindrical shells reinforced by FGM stiffeners in thermal environment

In this paper, Donnell's shell theory and smeared stiffeners technique are improved to analyze the postbuckling and buckling behaviors of circular cylindrical shells of stiffened thin functionally graded material(FGM) sandwich under an axial loading on elastic foundations, and the shells are considered in a thermal environment. The shells are stiffened by FGM rings and stringers. A general sigmoid law and a general power law are proposed. Thermal elements of the shells and reinforcement stiffeners are considered. Explicit expressions to find critical loads and postbuckling load-deflection curves are obtained by applying the Galerkin method and choosing the three-term approximate solution of deflection. Numerical results show various effects of temperature, elastic foundation, stiffeners, material and geometrical properties, and the ratio between face sheet thickness and total thickness on the nonlinear behavior of shells.     

Nonlinear stability of double-deck reticulated circular shallow spherical shell

Based on the variational equation of the nonlinear bending theory of doubledeck reticulated shallow shells, equations of large deflection and boundary conditions for a double-deck reticulated circular shallow spherical shell under a uniformly distributed pressure are derived by using coordinate transformation means and the principle of stationary complementary energy. The characteristic relationship and critical buckling pressure for the shell with two types of boundary conditions are obtained by taking the modified iteration method. Effects of geometrical parameters on the buckling behavior are also discussed.     

Classical and nonlinear buckling analyses of spherical sandwich shells

The buckling and initial postbuckling behavior of clamped shallow spherical sandwich shells with dissimilar face sheets under a uniform pressure is studied. The numerical results show that the buckling and initial post-buckling behavior of clamped shallow spherical sandwich shells with dissimilar face sheets is similar to that of the corresponding homogeneous shell.     

Buckling and Postbuckling of Laminated Thin Cylindrical Shells under Hygrothermal Environments

ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｒｅｃｅｎｔｙｅａｒｓ,ｆｉｂｅｒ＿ｒｅｉｎｆｏｒｃｅｄｃｏｍｐｏｓｉｔｅｌａｍｉｎａｔｅｄｓｈｅｌｌｓｔｒｕｃｔｕｒｅｓａｒｅｗｉｄｅｌｙｕｓｅｄｉｎｔｈｅａｅｒｏｓｐａｃｅ ,ｍａｒｉｎｅｉｎｄｕｓｔｒｙ ,ａｕｔｏｍｏｂｉｌｅｉｎｄｕｓｔｒｙａｎｄｏｔｈｅｒｅｎｇｉｎｅｅｒｉｎｇａｐｐｌｉｃａｔｉｏｎｓ.Ｄｕｒｉｎｇｔｈｅｏｐｅｒａｔｉｏｎａｌｌｉｆｅ ,ｔｈｅｖａｒｉａｎｃｅｏｆｔｅｍｐｅｒａｔｕｒｅａｎｄｍｏｉｓｔｕｒｅｒｅｄｕｃｅｓｔｈｅｅｌａｓｔｉｃｍｏｄｕｌｉ…     

Nonlinear stability of large k-value shallow spherical shells with a symmetrically distributed line load

In this paper, we treat the nonlinear stability problem of shallow spherical shells with large values ofk(k=12(1–v) · 2f/h,f = shell rise,h = shell thickness) under the action of uniformly distributed line load along a circle concentric with the shell boundary. Load-deflection curves are computed at successive increments of uniformly distributed line loads by using both cubic B-spline approximations and iterative techniques. Our algorithm yields fairly good convergent results for values ofk as large as 400. The limiting case in which shells are loaded along a circle of small radius has been specially investigated and the computed critical loads are compared with those obtained with central point loads by other authors.     

Effects of imperfections on the buckling response of compression-loaded composite shells

The results of an experimental and analytical study of the effects of initial imperfections on the buckling and postbuckling response of three unstiffened thin-walled compression-loaded graphite-epoxy cylindrical shells with different orthotropic and quasi-isotropic shell-wall laminates are presented. The results identify the effects of traditional and non-traditional initial imperfections on the non-linear response and buckling loads of the shells. The traditional imperfections include the geometric shell-wall mid-surface imperfections that are commonly discussed in the literature on thin shell buckling. The non-traditional imperfections include shell-wall thickness variations, local shell-wall ply-gaps associated with the fabrication process, shell-end geometric imperfections, non-uniform applied end loads, and variations in the boundary conditions including the effects of elastic boundary conditions. A high-fidelity non-linear shell analysis procedure that accurately accounts for the effects of these traditional and non-traditional imperfections on the non-linear responses and buckling loads of the shells is described. The analysis procedure includes a non-linear static analysis that predicts stable response characteristics of the shells and a non-linear transient analysis that predicts unstable response characteristics.     

Thermal buckling and postbuckling behavior of FG-GRC laminated cylindrical shells with temperature-dependent material properties

Thermal postbuckling analysis is presented for graphene-reinforced composite (GRC) laminated cylindrical shells under a uniform temperature field. The GRC layers are arranged in a functionally graded (FG) graphene reinforcement pattern by varying the graphene volume fraction in each GRC layer. The GRCs possess temperature dependent and anisotropic material properties and the extended Halpin–Tsai model is employed to evaluate the GRC material properties. The governing equations are based on a higher order shear deformation shell theory and include the von Kármán-type kinematic nonlinearity and the thermal effects. A singular perturbation method in conjunction with a two-step perturbation approach is applied to determine the thermal postbuckling equilibrium path for a GRC shell with or without geometric imperfection. An iterative scheme is developed to obtain numerical thermal buckling temperatures and thermal postbuckling load–deflection curves for the shells. The results reveal that the FG-X piece-wise FG graphene distribution can enhance the thermal postbuckling capacity of the shells when the shells are subjected to a uniform temperature loading.

     

Nonlinear static and dynamic analysis for laminated,annular, spherical caps of moderate thickness

Based on Timoshenko-Mindlin kinematic hypothesis, the shallow shell theory is extended to include the transverse shear deformation for the nonlinear axisymmetric dynamic analysis of the symmetric cross-ply shallow spherical shell. Using the orthogonal point collocation method and the Newmark scheme, an iterative solution is formulated. The numerical results for the nonlinear static and dynamic responses and dynamic buckling of these shallow spherical shells with circular holes under uniformly distributed static or dynamic normal impact loads are presented and compared with available data.     

Analysis of postbuckling strength of stringer stiffened cylindrical shells under axial compression

An analysis of the postbuckling strength of stringer stiffened cylindrical shells, subject to axial compression is described. The method used in this paper is based on plastic analysis extending Murray’s method which was used to analyse postbuckling behaviour of stiffened plates loaded axially and in bending. The mechanism tripping of stringer and crumpling of shell plate is described based on how the test specimens are deformed after buckling.Finally the theoretical analyses are compared with the experimental results of steel specimens. The theoretical results coincide quite well with the experimental data. It should therefore be possible to use the method described here to analyse postbuckling strength of stringer stiffened cylindrical shells and to estimate energy absorption capabilities in relation to collision studies.     

Postbuckling of imperfect stiffened cylindrical shells under combined external pressure and heating

1.IntroductionStiffenedcylindricalshellsarewidelyusedinmanytypesofstructures.Inpracticetheyoftensubjecttovarioustypesofcombinedthermalandmechanicalloadingandmayhavesignificantandunavoidableinitialgeometricalimperfections.Therefore,thepostbucklingbehaviorofimperfectstiITenedcylindricalshellsundercombinedexternalpress.ureandthermalloadingmustbewellunderstood.Manypostbucklingstudieshavebeenmadetbrstiffenedcylindricalshellsunderpureaxialcompression,uniformexternalpressureortheircombinations,where…     

Experiments on the postbuckling behavior of circular cylindrical shells under hydrostatic pressure

Detailed experimental studies are performed on the postbuckling behavior of circular cylindrical shells under hydrostatic pressure, by using lap-jointed polyester test cylinders with radius 100 mm, thickness 0.25 mm and lengths ranging from 23 to 165 mm. Connections of the edge shortening and radial displacement with applied pressures as well as wave forms for typical postbuckling configurations are determined for various values of the shell curvature parameterZ ranging from 20 to 1000. It is found that the buckling pressure and the corresponding wave number for each cylinder compare favorably with those theoretically predicted, and that the minimum pressure after buckling decreases with the increase inZ, until it becomes about 70 percent of the theoretical buckling pressure for long shells withZ greater than 200.     

Experimental investigation of the buckling of shallow spherical shells

In the present paper, the buckling behavior of clamped thin shallow spherical shells under external pressure is studied. Seventy-nine plastic shells formed by thermovacuum process were tested. The distributions of initial geometrical imperfections and vertical displacements were minutely measured with a differential transformer. It was possible to control the symmetrical initial geometrical imperfection of each specimen.Results indicate that the buckling phenomena of shallow spherical shells vary greatly with the symmetrical initial imperfection parameter η. In the case of the geometrical parameter λ larger than 5.5, the amplitude of the asymmetrical displacement component with the bifurcation buckling wave calculated by Huang becomes large immediately before buckling. The validity of Huang's theory for an initially perfect shell is experimentally demonstrated.     

Experiments on the postbuckling behavior of circular cylindrical shells under compression

Detailed experimental studies are performed on the postbuckling behavior of circular cylindrical shells under compression, by using polyester test cylinders with the geometric parameterZ ranging from 20 to 1000. In each case, variations of the equilibrium load, circumferential wave number and maximum inward and outward deflections, with applied edge shortenings, are clarified. Contour lines for typical postbuckling configurations are also shown. It is found that, as the cylinder is compressed beyond the primary buckling, secondary bucklings take place successively with diminishing wave numbers, and that postbuckling equilibrium loads become significantly lower than those at buckling asZ increases. Further, for short shells withZ≦100, the buckled waveforms are always symmetric with one-tier diamond buckles, while for longer shells, asymmetric postbuckling patterns with two tiers of buckles dominate.