Characterisation and stability of hydrophobic surfaces in water

The stability of four different hydrophobic surfaces in contact with water is assessed and discussed: H-terminated silicon, hexamethyldisilazane (HMDS) coated silicon, silicon surfaces covered with self-assembled monolayers (SAMs) of octadecyltrichlorosilane (OTS) and gold surfaces modified with SAMs of alkanethiols. Changes in hydrophobicity and surface oxidation were determined by contact angle measurements, X-ray photoelectron spectroscopy and AFM.     

Thermal stability of thiol and silane monolayers: A comparative study

The stability of self-assembled monolayers (SAMs) at elevated temperatures is of considerable technological importance. The thermal stability of 1-octadecanethiol (ODT), 16-mercaptohexadecanoic acid (MHDA) and 1H,1H,2H,2H-perfluorodecanethiol (PFDT) SAMs on gold surfaces, and of 4-aminobutyltriethoxysilane (ABTES) and 1H, 1H, 2H, 2H-perfluorodecyltriethoxysilane (PFDS) assembled on hydroxylated silicon surfaces, was studied by X-ray photoelectron spectroscopy (XPS). The samples were heated in ultrahigh vacuum to temperatures in excess of that required for SAM degradation. ODT monolayers were stable to ca. 110 °C, while MHDA and PFDT SAMs were stable to ca. 145 °C. ABTES SAMs were found to be indefinitely stable to 250 °C, while PFDS SAMs were stable to 350 °C. These studies demonstrate the advantages of using silane monolayers for moderate to high temperature applications and illustrate differences that arise due to the nature of the tail group. To demonstrate the feasibility of silanes for template-directed patterning, a hydroxylated silicon oxide surface containing microcontact-printed PFDS patterns was spin-coated with a mainly hydrophilic block copolymer. Annealing the surface at 90 °C for 2 h caused the block copolymer to dewet the hydrophobic PFDS-patterned regions and adsorb exclusively on the unpatterned regions of the surface.     

Self-assembled monolayers of decanethiol on Au(111)/mica

We report here a preparation for thin gold films on mica substrates. We have investigated the influence of the substrate temperature and the evaporation rate on the morphology of the films. After careful outgasing of the substrate, 100 nm of Au is evaporated onto the mica surface maintained at high temperature. After slow cooling, ex situ characterizations are performed using AFM and STM. For our purposes, the best compromise between roughness and grain size is found to occur for an evaporation rate of 2 ?s^-1 onto a mica substrate maintained at 460 C. We have used these substrates for STM and AFM study of decanethiol self-assembled monolayers (SAMs). We present results for gold samples immersed for a few seconds in decanethiol solutions, revealing an incomplete organization of the films. The organization process is discussed through comparison between AFM and STM data recorded on the SAMs. Then we present molecular resolution STM pictures of ordered SAMs for longer immersion times. Received 25 May 1999     

硒杂环化合物(4,5-苯并苤硒脑)在金表面上的自组装

为了寻求新的自组装单分子膜体系 ,构建新的功能膜 ,研究了具备平面型的大环共轭硒杂环化合物——— 4,5 苯并苤硒脑 (苯并 [c]硒二唑 ,简称苤硒脑 )在金表面的自组装单分子膜 .通过X射线光电子能谱 (XPS)和电化学手段对其进行表征 .XPS研究结果表明 ,自组装形成单分子膜后 ,苤硒脑分子中Se3d结合能从 5 7.4eV下降到 5 7.1eV ;表明硒杂环化合物是通过金硒键固定在金表面上的 ;电化学循环伏安法实验表明 ,金电极表面上自组装该有机硒后 ,Fe(CN) 63 -/ 4 -的氧化还原峰几乎完全消失 ;以四硼酸钠为底液 ,测得该化合物自组装在金表面上时 ,其还原电位在 - 0 .6 6V ,与在溶液中用裸金电极测得的还原峰电位基本一致 .     

Gold nanoparticle growth on self-assembled monolayers of ferrocenyl-substituted terpyridine on graphite

In this contribution we demonstrate that densely packed gold nanoparticles can be grown by Volmer–Weber mode on ferrocenyl functionalized terpyridine (FcTerp) on graphite. FcTerp forms highly ordered and dense self-assembled monolayers (SAMs) on graphite which significantly reduces the diffusion length of gold atoms and increases the sticking coefficient compared to bare graphite. Both effects lead to an increased nucleation and thus, to the growth of densely packed gold nanoparticles with diameters in the nanometer range. The optical properties of the nanoparticles as well as their morphology and the structure of the SAMs were characterized by optical extinction spectroscopy and scanning tunneling microscopy.     

Using fluorescence measurement of zinc ions liberated from ZnS nanoparticle labels in bioassay for <Emphasis Type="Italic">Escherichia coli</Emphasis> O157:H7

In this study, an alternative approach using ZnS nanoparticle biolabels as fluorescence signal transducers is reported for the immunoassay of E. coli O157:H7 in tap water samples. Instead of measuring the fluorescence of ZnS nanoparticles in the assay, the fluorescence signal is generated through the binding of zinc ions released from nanoparticle labels with zinc-ion sensitive fluorescence indicator Fluozin-3. In the assay, ZnS nanoparticles around 50 nm in diameter were synthesized, bioconjugated, and applied for the detection of E. coli O157:H7. The assay shows a detection range over two orders of magnitude and a detection limit around 1000 colony-forming units (cfu) of E. coli O157:H7.     

An anchoring strategy for photoswitchable biosensor technology: azobenzene-modified SAMs on Si(111)

A mild and efficient procedure has been developed to obtain covalently attached self-assembled monolayers (SAMs) on Si(111) with photochromic azobenzene head-groups. Starting from neat or diluted carboxylic acid functionalized monolayers on-chip coupling reactions were applied to attach hydroxyl-functionalized azobenzene units to the SAMs by ester bond formation. The modified surfaces were characterized by high-resolution X-ray photoelectron spectroscopy (XPS), transmission Fourier transform infrared spectroscopy (FT-IR), and contact angle measurements. Reversible cis ↔ trans isomerizations of photoswitchable SAMs were monitored by wettability measurements. Electronic Supplementary Material  The online version of this article () contains supplementary material, which is available to authorized users. Dedicated with respect and compliments to Professor Helmut Schwarz on the occasion of his 65th birthday.     

Growth kinetics of self-assembled monolayers of thiophene and terthiophene on Au(111): An infrared spectroscopic study

The growth kinetics of self-assembled monolayers (SAMs) of thiophene compounds on Au(111) surfaces was revealed by Fourier-transform infrared reflection absorption spectroscopy (FT-IR-RAS). Thiophene and terthiophene form well-ordered SAMs on Au(111) surfaces by immersing gold substrates into their ethanol solutions for ca. 15 h. Gibbs free energies for the adsorption processes of thiophene and terthiophene were found to be identical. However, the growth and molecular orientation of SAMs are different between two thiophene compounds. Terthiophene in SAMs orients parallel to the surface. The SAM growth of terthiophene obeys a time-dependent Langmuir scheme. On the other hand, the thiophene SAM undergoes a two-step growth process with unique molecular orientations. In the primary phase, thiophene assumes a parallel orientation on the Au(111) surface. In the second phase, thiophene is oriented close to the normal of the surface. The different growth process between thiophene and terthiophene is attributable to the topology of sulfur positions in the molecules. Received 23 May 2001 and Received in final form 11 February 2002     

Ordered self-assembled monolayers of Peptide nucleic acids with DNA recognition capability

We report on the formation of ordered self-assembled monolayers (SAMs) of single-stranded peptide nucleic acids (ssPNA). In spite of their remarkable length (7 nm) thiolated PNAs assemble standing up on gold surfaces similarly to the SAMs of short alkanethiols. SAMs of ssPNA recognize complementary nucleic acids, acting as specific biosensors that discriminate even a point mutation in target ssDNA. These results are obtained by surface characterization techniques that avoid labeling of the target molecule: x-ray photoemission, x-ray absorption and atomic force microscopy.     

Controlled immobilization of peptide nanotube-templated metallic wires on Au surfaces

Peptide nanotubes were immobilized on Au substrates functionalized with self-assembled monolayers of 4-mercaptobenzoic acid in a pH 6 citric acid solution via hydrogen bonds between the peptide nanotubes and the monolayers. Subsequently, the immobilized nanotubes were metallized by nickel via the electroless coating process. Received 30 November 2000     

Effect of end groups on contact resistance of alkanethiol based metal-molecule-metal junctions using current sensing AFM

Tuning the charge transport through a metal-molecule-metal junction by changing the interface properties is widely studied and is of paramount importance for applications in molecular electronic devices. We used current sensing atomic force microscopy (CSAFM) as a tool to study the contact resistance of metal-molecule-metal (MmM) junctions formed by sandwiching self-assembled monolayers (SAMs) of alkanethiols with various end groups (-CH₃, -OH and -NH₂) between Au(1 1 1) substrates and Au coated AFM tips. The effect of interface chemistry on charge transport through such SAMs with varying end groups was studied in an inert, non-polar liquid (hexadecane) environment. We find that the contact resistances of these MmM junctions vary significantly based on the end group chemistry of the molecules.     

Surface modification of cobalt-chromium-tungsten-nickel alloy using octadecyltrichlorosilanes

Cobalt-chromium (Co-Cr) alloys have been extensively used for medical implants because of their excellent mechanical properties, corrosion resistance, and biocompatibility. This first time study reports the formation and stability of self-assembled monolayers (SAMs) on a Co-Cr-W-Ni alloy. SAMs of octadecyltrichlorosilanes (OTS) were coated on sputtered Co-Cr-W-Ni alloy thin film and bulk Co-Cr-W-Ni alloy. OTS SAM coated alloy specimens were characterized using contact angle goniometry, Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM). Contact angle analysis and FTIR suggested that ordered monolayers were coated on both sputtered and bulk alloy. XPS suggested the selective dissolution of cobalt from the alloy during the formation of OTS SAM. The bonding between the alloy and the OTS SAM was mainly attributed to Si-O-Cr and Si-O-W covalent bonds and a smaller contribution from Si-O-Co bonds. AFM images showed the distribution of islands of monolayers coated on the alloy. The height of monolayers in majority of the islands was closer to the theoretical length of fully extended OTS molecules oriented perpendicular to the surface. The stability of OTS SAM was investigated in tris-buffered saline at 37 °C for up to 7 days. Contact angle, FTIR, and XPS collectively confirmed that the monolayers remain ordered and bound to the alloy surface under this condition. This study shows that Co-Cr alloys can be surface modified using SAMs for potential biomedical applications.     

Silver ions adsorbed to self-assembled monolayers of alkanedithiols on gold surfaces form Ag–dithiol–Au multilayer structures

Double-ended alkanedithiols, 1,9-nonanedithiol and 1,5-pentanedithiol, formed self-assembled monolayers (SAMs) on Au(l11) substrates and were used to adsorb silver ions from an ethanolic solution of silver nitrate and formed Ag–dithiol–Au multilayer structures. Ellipsometry, contact angle measurement and X-ray photoelectron spectroscopy (XPS) confirmed that the alkanedithiol molecules formed SAMs with only one-ended thiol groups attached to the Au substrates, which was supported by molecular mechanics calculation. XPS and X-ray Auger electron spectroscopy (XAES) indicated that silver ions were deposited onto the SAMs from the solution by the chemical reaction of silver nitrate with another-ended thiol groups of the SAMs. Atomic force microscopy (AFM) was used to observe SAMs and multilayer structures. Received: 20 January 2000 / Accepted: 18 April 2000 / Published online: 9 August 2000     

Self-assembly of silanated poly(ethylene glycol) on silicon and glass surfaces for improved haemocompatibility

Surface immobilization of poly(ethylene glycol) (PEG) is an effective method to produce a material surface with protein repulsive property. This property could be made permanent by using covalent grafting of the PEG molecules onto material surfaces. In this study, self-assembled monolayers (SAMs) of PEG on silicon-containing materials (silicon chip and glassplate) were obtained through a one-step coating procedure of one kind of silanated PEG molecules made through the reaction between monomethoxy PEG and 3-isocyanatopropyltriethoxysilane. Atomic force microscopy (AFM) and water static contact angle measurement were employed to investigate the surface topography and wettability of the PEGylated material surfaces. The changes in the topography and the water contact angle of the surfaces with time of incubation in PBS solution were also measured. The results revealed that stable and uniform self-assembled monolayers of PEG could be formed on silicon or glass surfaces by simply soaking the substrates in the solution of silanated PEGs. The covalent coupling of PEGs to the substrates was also confirmed. In order to evaluate the stability of the SAMs, blood compatibility of the modified glassplate surface was evaluated by measuring full blood activated partial thromboplastin time (APTT), prothrombin time (PT), and thrombin time (TT), as well as by scanning electron microscopy (SEM) analysis of the appearance of adherence and denaturation of blood platelets onto the glassplate. The silanated PEGs were shown to have good effect on the protein-repulsion as well as haemocompatibility of the substrates.     

Antibacterial activities of magnesium oxide (MgO) nanoparticles against foodborne pathogens

The antibacterial activities of magnesium oxide nanoparticles (MgO NP) alone or in combination with other antimicrobials (nisin and ZnO NP) against Escherichia coli O157:H7 and Salmonella Stanley were investigated. The results show that MgO NP have strong bactericidal activity against the pathogens, achieving more than 7 log reductions in bacterial counts. The antibacterial activity of MgO NP increased as the concentrations of MgO increased. A synergistic effect of MgO in combination with nisin was observed as well. However, the addition of ZnO NP to MgO NP did not enhance the antibacterial activity of MgO against both pathogens. Scanning electron microscopy was used to characterize the morphological changes of E. coli O157:H7 before and after antimicrobial treatments. It was revealed that MgO NP treatments distort and damage the cell membrane, resulting in a leakage of intracellular contents and eventually the death of bacterial cells. These results suggest that MgO NP alone or in combination with nisin could potentially be used as an effective antibacterial agent to enhance food safety.     

Reorientation Response of Magnetic Microspheres Attached to Gold Electrodes Under an Applied Magnetic Field

In this work, we report the mechanical reorientation of thiolated ferromagnetic microspheres bridging a pair of gold electrodes under an external magnetic field. When an external magnetic field (7 kG) is applied during the measurement of the current–voltage characteristics of a carboxyl ferromagnetic microsphere (4 μm diameter) attached to two gold electrodes by self-assembled monolayers (SAMs) of octane dithiol (C₈H₁₈S₂), the current signal is distorted. Rather than due to magnetoresistance, this effect is caused by a mechanical reorientation of the ferromagnetic sphere, which alters the number of SAMs between the sphere and the electrodes and therefore affects conduction. To study the physical reorientation of the ferromagnetic particles, we measure their hysteresis loops while suspended in a liquid solution.     

SPR生物传感器快速检测大肠杆菌O157:H7的研究

建立了一种基于表面等离子体共振(surface plasmon resonance,SPR)原理的生物传感器方法,实现了快速检测大肠杆菌O157:H7.研究选用BIACORE 3000系统及葡聚糖修饰的CM5芯片,先用EDC/NHS将芯片活化,然后抗体直接通过酰胺键固定在金表面,再用乙醇胺封闭,这样处理之后的芯片就可用于检测大肠杆菌O157:H7.利用NaOH溶液对芯片再生,实现对多个不同浓度样品检测,采用时间对响应单位(RU)记录数据.该法检测大肠杆菌O157:H7的检测限为3×105 CFU·mL-1,RU变化值和大肠杆菌O157:H7的浓度在一定范围内相关性良好,相关系数达到0.99.检测时间短,一个样品仅需5～7 min,再生效果好,芯片可重复使用50次以上.可快速、在线、稳定地检测大肠杆菌O157:H7,有望成为一种在线检测食品致病性微生物的有力手段.     

Interfacial kinetic enhancement of metal ion adsorption on binary mixed self-assembled monolayers

The adsorption of metal ions, a type of surface reaction on binary mixed self-assembled monolayers (SAMs) on a gold surface composed of 1,6-hexanedithiol (HDT) with 11-mercaptoundecanoic acid (MUA), was monitored by in situ surface plasmon resonance (SPR) measurements. The differential SPR reflectance (ΔR) enables the kinetics of adsorption of Pt²⁺ on the mixed SAMs to be investigated. Unlike single HDT SAM, kinetic analyses of the mixed SAMs showed that the rate of adsorption of Pt²⁺ was enhanced and that it was highly dependent on the fraction of MUA present. These SPR measurements suggest that the adsorption rate of metal ions can be readily manipulated simply by using mixed SAMs.     

溶液酸碱性对金纳米粒子在端基功能化单分子膜表面组装影响的SERS光谱研究

在4,4’-二硫联吡啶在Au表面形成自组装单分子层膜的基础上,采用表面增强拉曼散射光谱(SERS)研究了在不同pH值条件下金纳米粒子在4,4’-二硫联吡啶自组装单分子膜/Au体系表面的组装。研究结果表明,由于处于单分子膜表面的吡啶环中氮原子的质子化程度随溶液环境中pH值的变化而变化,使得金纳米粒子与单分子膜表面间的结合作用程度不同,由此会引起金纳米粒子在单分子膜表面的覆盖度存在差异,并最终导致所观测到的4-巯基吡啶自组装单分子膜的SERS光谱强度存在明显的差异。而且,令人感兴趣的是,所观测到的SERS谱峰强度随金纳米粒子组装时pH值的变化呈现出明显的规律性。结合分子结构特征的分析,初步阐明了SERS谱峰强度随pH值这一组装条件的改变而发生规律性变化的内在原因。